Resources

A straight rigid copper wire of length L=0.450 mL = 0.450\text{ m} carries a steady current of I=3.20 AI = 3.20\text{ A} directed horizontally along the positive xx-axis. The wire is immersed in a uniform external magnetic field of magnitude B=0.650 TB = 0.650\text{ T} directed horizontally at an angle of θ=35.0∘\theta = 35.0^\circ north of east (where east corresponds to the positive xx-axis and north corresponds to the positive yy-axis). Determine the magnitude and direction of the magnetic force F⃗B\vec{F}_B exerted on this segment of the wire.

Answer and steps

Final answer

Magnitude: 0.537 N0.537\text{ N}; Direction: along the positive zz-axis (vertically upward, out of the horizontal xyxy-plane).

Steps

01

Identify the Governing Formula

The magnetic force F⃗B\vec{F}_B on a straight, current-carrying wire of length LL in a uniform magnetic field B⃗\vec{B} is given by the Lorentz force equation for conductors: F⃗B=I(L⃗×B⃗)\vec{F}_B = I (\vec{L} \times \vec{B})

The magnitude of this force depends on the angle θ\theta between the current direction (vector L⃗\vec{L}) and the magnetic field vector B⃗\vec{B}: FB=ILBsin⁡θF_B = I L B \sin\theta


02

Determine the Angle Between L⃗\vec{L} and B⃗\vec{B}

  • The current flows horizontally along the positive xx-axis (due east), so the length vector is L⃗=L i^\vec{L} = L\,\hat{i}.
  • The magnetic field lies in the horizontal xyxy-plane, oriented at an angle of 35.0∘35.0^\circ north of east (measured counterclockwise from the positive xx-axis toward the positive yy-axis).

Therefore, the angle θ\theta between L⃗\vec{L} and B⃗\vec{B} is directly: θ=35.0∘\theta = 35.0^\circ


03

Calculate the Magnitude of the Magnetic Force

Substitute the given values into the scalar formula:

  • I=3.20 AI = 3.20\text{ A}
  • L=0.450 mL = 0.450\text{ m}
  • B=0.650 TB = 0.650\text{ T}
  • θ=35.0∘\theta = 35.0^\circ

FB=(3.20 A)⋅(0.450 m)⋅(0.650 T)⋅sin⁡(35.0∘)F_B = (3.20\text{ A}) \cdot (0.450\text{ m}) \cdot (0.650\text{ T}) \cdot \sin(35.0^\circ)

FB=(0.936 N)⋅0.5736≈0.537 NF_B = (0.936\text{ N}) \cdot 0.5736 \approx 0.537\text{ N}


04

Determine the Direction of the Force

Apply the right-hand rule for the cross product L⃗×B⃗\vec{L} \times \vec{B}:

  1. Point the extended fingers of your right hand in the direction of the conventional current (along the +x+x-axis, pointing East).
  2. Curl your fingers toward the magnetic field vector B⃗\vec{B} (in the xyxy-plane, angled toward the +y+y-axis, North).
  3. Your outstretched thumb points perpendicularly upward, out of the horizontal xyxy-plane, along the positive zz-axis (+k^+\hat{k}).

Vector verification: L⃗=L i^\vec{L} = L\,\hat{i} B⃗=Bcos⁡(35.0∘) i^+Bsin⁡(35.0∘) j^\vec{B} = B\cos(35.0^\circ)\,\hat{i} + B\sin(35.0^\circ)\,\hat{j} F⃗B=ILBsin⁡(35.0∘) (i^×j^)=FB k^\vec{F}_B = I L B \sin(35.0^\circ)\,(\hat{i} \times \hat{j}) = F_B\,\hat{k}

Thus, the force has a magnitude of 0.537 N0.537\text{ N} directed along the positive zz-axis (vertically upward).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the trigonometric factor in the magnetic force cross product by using cosine instead of sine, leading to an incorrect force magnitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    FB=ILBcos⁡(θ)  ⟹  FB=(3.20 A)(0.450 m)(0.650 T)cos⁡(35.0∘)F_B = I L B \cos(\theta) \implies F_B = (3.20\text{ A})(0.450\text{ m})(0.650\text{ T})\cos(35.0^\circ)

    Correct

    FB=ILBsin⁡(θ)=(3.20 A)(0.450 m)(0.650 T)sin⁡(35.0∘)F_B = I L B \sin(\theta) = (3.20\text{ A})(0.450\text{ m})(0.650\text{ T})\sin(35.0^\circ)

    The magnetic force on a straight conductor originates from the vector cross product F⃗B=I(L⃗×B⃗)\vec{F}_B = I(\vec{L} \times \vec{B}), whose magnitude is given by ILBsin⁡(θ)I L B \sin(\theta), not ILBcos⁡(θ)I L B \cos(\theta).

  2. Step 2

    FB=0.767 NF_B = 0.767\text{ N}

    Correct

    FB=0.537 NF_B = 0.537\text{ N}

    Your arithmetic follows correctly from using cos⁡(35.0∘)\cos(35.0^\circ), but this value is affected by the trigonometric function error in the preceding step.

  3. Step 3

    Direction: along the +z-axis (upward)\text{Direction: along the }+z\text{-axis (upward)}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly determined the direction of the magnetic force along the positive zz-axis using the right-hand rule.

You accurately identified and substituted the given physical quantities II, LL, BB, and θ=35.0∘\theta = 35.0^\circ.

You calculated the arithmetic value accurately according to your written formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Cross product trigonometric factor confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the vector cross product magnitude rule with the scalar dot product rule, using cos⁡θ\cos\theta rather than sin⁡θ\sin\theta for the magnetic force FB=∣I(L⃗×B⃗)∣F_B = |I(\vec{L} \times \vec{B})|.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cross Product vs. Dot Product
  • ∣A⃗×B⃗∣=ABsin⁡θ|\vec{A} \times \vec{B}| = A B \sin\theta, whereas A⃗⋅B⃗=ABcos⁡θ\vec{A} \cdot \vec{B} = A B \cos\theta.

  • Always associate magnetic force F⃗=I(L⃗×B⃗)\vec{F} = I(\vec{L} \times \vec{B}) and F⃗=q(v⃗×B⃗)\vec{F} = q(\vec{v} \times \vec{B}) with cross products and the sine function.

Limiting Case Check
  • When a current flows parallel to a magnetic field (θ=0∘\theta = 0^\circ), the magnetic force must be zero.

  • Check your formula at θ=0∘\theta = 0^\circ: sin⁡(0∘)=0\sin(0^\circ) = 0 gives zero force, whereas cos⁡(0∘)=1\cos(0^\circ) = 1 would erroneously predict maximum force.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Replace cos⁡(35.0∘)\cos(35.0^\circ) with sin⁡(35.0∘)\sin(35.0^\circ) in the scalar magnetic force expression: FB=ILBsin⁡(35.0∘)F_B = I L B \sin(35.0^\circ).

  2. Evaluate the product: FB=(3.20 A)(0.450 m)(0.650 T)sin⁡(35.0∘)=(0.936 N)⋅0.5736≈0.537 NF_B = (3.20\text{ A})(0.450\text{ m})(0.650\text{ T})\sin(35.0^\circ) = (0.936\text{ N}) \cdot 0.5736 \approx 0.537\text{ N}.

  3. Combine the corrected magnitude with your already correct direction: 0.537 N0.537\text{ N} along the positive zz-axis.

Final answer

Magnitude: 0.537 N0.537\text{ N}; Direction: along the positive zz-axis (vertically upward)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric definition of vector cross products and practice verifying formulas using limiting angles such as 0∘0^\circ and 90∘90^\circ.

  • Solve the follow-up practice problems to reinforce using FB=ILBsin⁡θF_B = I L B \sin\theta.

OverviewACEpath Teacher's Diagnosis

02 The student misapplies the right-hand rule by reversing the order of the cross product as B × I, resulting in a force directed along the negative z-axis instead of the positive z-axis.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    FB=ILBsin⁡(θ)  ⟹  FB=(3.20 A)(0.450 m)(0.650 T)sin⁡(35.0∘)=0.537 NF_B = ILB\sin(\theta) \implies F_B = (3.20\text{ A})(0.450\text{ m})(0.650\text{ T})\sin(35.0^\circ) = 0.537\text{ N}

  2. Step 2

    By right-hand rule, B points north of east and I points east, so B × I points into the page.

    Correct

    F⃗B=I(L⃗×B⃗)\vec{F}_B = I(\vec{L} \times \vec{B}), so point fingers along L⃗\vec{L} (east, +x+x) and curl toward B⃗\vec{B} (north of east).

    The magnetic force is defined by F⃗B=I(L⃗×B⃗)\vec{F}_B = I(\vec{L} \times \vec{B}), not B⃗×I⃗\vec{B} \times \vec{I}. Because the vector cross product is anticommutative, reversing the order reverses the sign of your result.

  3. Step 3

    Direction: along the -z-axis (vertically downward)

    Correct

    Direction: along the positive zz-axis (vertically upward, out of the page)

    Because your cross-product order was inverted in the previous step, your resulting direction pointed along −k^-\hat{k} rather than +k^+\hat{k}.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct scalar formula FB=ILBsin⁡(θ)F_B = ILB\sin(\theta) for the magnetic force magnitude.

You accurately substituted the given current, wire length, field strength, and angle to get 0.537 N0.537\text{ N}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed cross-product order

You evaluated B⃗×I⃗\vec{B} \times \vec{I} instead of I⃗×B⃗\vec{I} \times \vec{B} when setting up the right-hand rule.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

The magnetic force on a current-carrying wire follows F⃗B=I(L⃗×B⃗)\vec{F}_B = I(\vec{L} \times \vec{B}). Since the cross product does not commute (A⃗×B⃗=−B⃗×A⃗\vec{A} \times \vec{B} = -\vec{B} \times \vec{A}), your fingers must always start in the direction of the current L⃗\vec{L} and sweep toward the field B⃗\vec{B}, never the other way around.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cross-Product Order
  • Magnetic force on a wire is F⃗B=I(L⃗×B⃗)\vec{F}_B = I(\vec{L} \times \vec{B}).

  • Always align your index finger or extended right-hand fingers with current I⃗\vec{I} first, then sweep toward magnetic field B⃗\vec{B}.

Anticommutative Property
  • u⃗×v⃗=−(v⃗×u⃗)\vec{u} \times \vec{v} = -(\vec{v} \times \vec{u}).

  • If you inadvertently compute B⃗×I⃗\vec{B} \times \vec{I}, flip the final direction 180∘180^\circ to restore the true force direction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the vector definition: F⃗B=I(L⃗×B⃗)\vec{F}_B = I(\vec{L} \times \vec{B}).

  2. Point the fingers of your right hand along the current direction (East, +i^+\hat{i}).

  3. Curl your fingers toward the magnetic field direction (35.0∘35.0^\circ north of east, which has a positive j^\hat{j} component).

  4. Your right thumb points straight out of the horizontal xyxy-plane along the positive zz-axis (+k^+\hat{k}).

Final answer

Magnitude: 0.537 N0.537\text{ N}; Direction: along the positive zz-axis (vertically upward, out of the page).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the vector definition F⃗B=I(L⃗×B⃗)\vec{F}_B = I(\vec{L} \times \vec{B}) and practice identifying which vector comes first.

  • Work through practice problems where current and magnetic field lie in the horizontal plane to build consistent right-hand rule orientation habits.

OverviewACEpath Teacher's Diagnosis

03 The student omits the angle dependency sin(θ), assuming the magnetic field is perpendicular to the wire, which overestimates the magnitude of the magnetic force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    FB=ILB  ⟹  FB=(3.20 A)(0.450 m)(0.650 T)  ⟹  FB=0.936 NF_B = ILB \implies F_B = (3.20\text{ A})(0.450\text{ m})(0.650\text{ T}) \implies F_B = 0.936\text{ N}

    Correct

    FB=ILBsin⁡θ=(3.20 A)(0.450 m)(0.650 T)sin⁡(35.0∘)≈0.537 NF_B = ILB\sin\theta = (3.20\text{ A})(0.450\text{ m})(0.650\text{ T})\sin(35.0^\circ) \approx 0.537\text{ N}

    You used the simplified formula FB=ILBF_B = ILB, which applies only when the wire is perpendicular to the magnetic field (θ=90∘\theta = 90^\circ). Because the magnetic field is oriented at 35.0∘35.0^\circ north of east relative to the current flowing along the east (+x+x) axis, the angle between L⃗\vec{L} and B⃗\vec{B} is θ=35.0∘\theta = 35.0^\circ, requiring the factor sin⁡(35.0∘)\sin(35.0^\circ).

  2. Step 2

    Direction: along the +z axis (vertically upward)\text{Direction: along the }+z\text{ axis (vertically upward)}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the relevant given values for current, wire length, and magnetic field strength.

You accurately carried out the arithmetic for the product ILBILB.

You correctly applied the right-hand rule to find that the magnetic force points along the positive zz-axis.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of angle dependence in cross product

You used FB=ILBF_B = ILB without including sin⁡θ\sin\theta for the non-perpendicular field.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the magnetic force on a wire as a simple scalar product ILBILB rather than the magnitude of a vector cross product I(L⃗×B⃗)I(\vec{L} \times \vec{B}), overlooking that only the perpendicular component of the magnetic field exerts a magnetic force on the current.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Angle Between Current and Magnetic Field
  • The magnitude of the magnetic force on a straight conductor is FB=ILBsin⁡θF_B = ILB\sin\theta, where θ\theta is the angle between the current vector L⃗\vec{L} and the field vector B⃗\vec{B}.

  • Whenever given an orientation angle for B⃗\vec{B} or the wire, draw both vectors from a common origin and verify whether θ=90∘\theta = 90^\circ or if an explicit sin⁡θ\sin\theta factor must be included.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the angle between the current vector L⃗\vec{L} (along +x+x) and the magnetic field vector B⃗\vec{B} (35.0∘35.0^\circ north of east): θ=35.0∘\theta = 35.0^\circ.

  2. Apply the full magnitude formula: FB=ILBsin⁡θ=(3.20 A)(0.450 m)(0.650 T)sin⁡(35.0∘)F_B = ILB\sin\theta = (3.20\text{ A})(0.450\text{ m})(0.650\text{ T})\sin(35.0^\circ).

  3. Calculate the result: FB=(0.936 N)(0.5736)≈0.537 NF_B = (0.936\text{ N})(0.5736) \approx 0.537\text{ N}.

Final answer

Magnitude: 0.537 N0.537\text{ N}; Direction: along the positive zz-axis (vertically upward).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the cross product definition F⃗B=I(L⃗×B⃗)\vec{F}_B = I(\vec{L} \times \vec{B}) to reinforce why sin⁡θ\sin\theta is fundamentally required.

  • Practice identifying the angle θ\theta between the current direction and magnetic field lines in 2D and 3D coordinate frames.

Lock it in

Similar question

01

A straight horizontal wire of length 0.20 m0.20\text{ m} carries a current of 1.5 A1.5\text{ A} toward the east. A uniform magnetic field of 0.40 T0.40\text{ T} points toward the north. Find the magnitude and direction of the magnetic force on the wire.

Answer

0.12 N0.12\text{ N}, directed vertically upward (+z+z-axis). Key steps: θ=90∘\theta = 90^\circ between east and north. FB=ILBsin⁡(90∘)=(1.5)(0.20)(0.40)(1)=0.12 NF_B = I L B \sin(90^\circ) = (1.5)(0.20)(0.40)(1) = 0.12\text{ N}. Using the right-hand rule: i^×j^=k^\hat{i} \times \hat{j} = \hat{k}.

02

A straight conductor of length 0.80 m0.80\text{ m} carries a current of 4.0 A4.0\text{ A} directed along the +x+x-axis in a magnetic field B⃗\vec{B} of magnitude 0.50 T0.50\text{ T}. If the magnetic field lies in the xyxy-plane at an angle of 150∘150^\circ measured counterclockwise from the +x+x-axis, determine the magnitude of the magnetic force exerted on the conductor.

Answer

0.80 N0.80\text{ N}. Key steps: The angle between L⃗\vec{L} (+x+x-axis) and B⃗\vec{B} is θ=150∘\theta = 150^\circ. Apply FB=ILBsin⁡θ=(4.0)(0.80)(0.50)sin⁡(150∘)=1.60×0.50=0.80 NF_B = I L B \sin\theta = (4.0)(0.80)(0.50)\sin(150^\circ) = 1.60 \times 0.50 = 0.80\text{ N}.

03

A rigid wire carries a current I=2.5 AI = 2.5\text{ A} along the length vector L⃗=(0.30 i^+0.40 j^) m\vec{L} = (0.30\,\hat{i} + 0.40\,\hat{j})\text{ m} in a uniform magnetic field B⃗=0.60 i^ T\vec{B} = 0.60\,\hat{i}\text{ T}. Calculate the magnetic force vector F⃗B\vec{F}_B and verify its magnitude using FB=ILBsin⁡θF_B = I L B \sin\theta.

Answer

F⃗B=−0.60 k^ N\vec{F}_B = -0.60\,\hat{k}\text{ N}; magnitude is 0.60 N0.60\text{ N}. Key steps:

  1. F⃗B=I(L⃗×B⃗)=2.5[(0.30i^+0.40j^)×0.60i^]=2.5(−0.24k^)=−0.60 k^ N\vec{F}_B = I(\vec{L} \times \vec{B}) = 2.5 [(0.30\hat{i} + 0.40\hat{j}) \times 0.60\hat{i}] = 2.5(-0.24\hat{k}) = -0.60\,\hat{k}\text{ N}.
  2. Magnitude check: L=0.302+0.402=0.50 mL = \sqrt{0.30^2 + 0.40^2} = 0.50\text{ m}. Angle θ\theta satisfies sin⁡θ=0.400.50=0.80\sin\theta = \frac{0.40}{0.50} = 0.80. FB=(2.5)(0.50)(0.60)(0.80)=0.60 NF_B = (2.5)(0.50)(0.60)(0.80) = 0.60\text{ N}.
Loading workspace…