Resources

In a low-pressure planetary atmosphere test chamber, sound propagation is investigated as the gas density approaches zero. The mean free path of gas molecules is given by ℓ=kBT2πdm2P\ell = \frac{k_B T}{\sqrt{2} \pi d_m^2 P}, where dm=3.70×10−10 md_m = 3.70\times 10^{-10}\text{ m} is the effective molecular diameter, T=280 KT = 280\text{ K}, and kB=1.38×10−23 J/Kk_B = 1.38\times 10^{-23}\text{ J/K}. Sound transmission breaks down when the acoustic wavelength λ\lambda becomes comparable to the mean free path, defined by the Knudsen threshold Kn=ℓλ≥0.100\text{Kn} = \frac{\ell}{\lambda} \ge 0.100. For an acoustic wave of frequency f=2.00×103 Hzf = 2.00\times 10^3\text{ Hz} propagating at v=310 m/sv = 310\text{ m/s}: (a) Calculate the acoustic wavelength λ\lambda. (b) Determine the critical mean free path ℓcrit\ell_{\text{crit}} corresponding to Kn=0.100\text{Kn} = 0.100. (c) Calculate the threshold chamber pressure PcritP_{\text{crit}} in pascals (Pa\text{Pa}) below which coherent longitudinal wave propagation fails.

Answer and steps

Final answer

(a) λ=0.155 m\lambda = 0.155\text{ m}; (b) ℓcrit=0.0155 m\ell_{\text{crit}} = 0.0155\text{ m}; (c) Pcrit=0.411 PaP_{\text{crit}} = 0.411\text{ Pa}.

Steps

Part (a): Calculating the Acoustic Wavelength

Sound is a mechanical longitudinal wave requiring molecular collisions to transmit localized compressions and rarefactions through a fluid medium. The wavelength λ\lambda of a wave is determined by the relationship between wave speed vv and frequency ff:

λ=vf\lambda = \frac{v}{f}

Substitute the given values: λ=310 m/s2.00×103 Hz=0.155 m\lambda = \frac{310\text{ m/s}}{2.00\times 10^3\text{ Hz}} = 0.155\text{ m}


Part (b): Determining the Critical Mean Free Path

The continuum assumption required for classical acoustic propagation breaks down when the average distance a particle travels between collisions—the mean free path ℓ\ell—becomes a significant fraction of the acoustic wavelength λ\lambda.

Using the Knudsen condition for acoustic breakdown, Kn=ℓλ≥0.100\text{Kn} = \frac{\ell}{\lambda} \ge 0.100, the critical mean free path ℓcrit\ell_{\text{crit}} at the threshold is:

ℓcrit=Kn⋅λ=0.100×0.155 m=0.0155 m\ell_{\text{crit}} = \text{Kn} \cdot \lambda = 0.100 \times 0.155\text{ m} = 0.0155\text{ m}


Part (c): Calculating the Threshold Chamber Pressure

The mean free path of gas molecules from kinetic theory is related to the pressure PP, temperature TT, and molecular diameter dmd_m by:

ℓ=kBT2πdm2P\ell = \frac{k_B T}{\sqrt{2}\pi d_m^2 P}

Rearranging to solve for the pressure PP:

P=kBT2πdm2ℓP = \frac{k_B T}{\sqrt{2}\pi d_m^2 \ell}

At the threshold of acoustic breakdown, ℓ=ℓcrit=0.0155 m\ell = \ell_{\text{crit}} = 0.0155\text{ m}. Substitute the physical constants and gas parameters:

  • kB=1.38×10−23 J/Kk_B = 1.38\times 10^{-23}\text{ J/K}
  • T=280 KT = 280\text{ K}
  • dm=3.70×10−10 md_m = 3.70\times 10^{-10}\text{ m}
  • ℓcrit=0.0155 m\ell_{\text{crit}} = 0.0155\text{ m}

Evaluate the numerator and denominator: kBT=(1.38×10−23 J/K)(280 K)=3.864×10−21 Jk_B T = (1.38\times 10^{-23}\text{ J/K})(280\text{ K}) = 3.864\times 10^{-21}\text{ J}

2πdm2ℓcrit=2π(3.70×10−10 m)2(0.0155 m)≈9.41×10−21 m3\sqrt{2}\pi d_m^2 \ell_{\text{crit}} = \sqrt{2}\pi (3.70\times 10^{-10}\text{ m})^2 (0.0155\text{ m}) \approx 9.41\times 10^{-21}\text{ m}^3

Thus, the critical pressure is: Pcrit=3.864×10−21 J9.41×10−21 m3≈0.411 PaP_{\text{crit}} = \frac{3.864\times 10^{-21}\text{ J}}{9.41\times 10^{-21}\text{ m}^3} \approx 0.411\text{ Pa}

Below this pressure, molecules travel distances comparable to a tenth of the wavelength without colliding, preventing the localized pressure perturbations from sustaining coherent sound waves.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the definition of the Knudsen number as Kn = λ / ℓ, leading to an erroneously large critical mean free path and correspondingly underestimated critical pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ=vf  ⟹  λ=3102.00×103=0.155 m\lambda = \frac{v}{f} \implies \lambda = \frac{310}{2.00 \times 10^3} = 0.155\text{ m}

  2. Step 2

    Kn=λℓcrit=0.100  ⟹  ℓcrit=λ0.100=0.1550.100=1.55 m\text{Kn} = \frac{\lambda}{\ell_{\text{crit}}} = 0.100 \implies \ell_{\text{crit}} = \frac{\lambda}{0.100} = \frac{0.155}{0.100} = 1.55\text{ m}

    Correct

    Kn=ℓcritλ=0.100  ⟹  ℓcrit=0.100×λ=0.0155 m\text{Kn} = \frac{\ell_{\text{crit}}}{\lambda} = 0.100 \implies \ell_{\text{crit}} = 0.100 \times \lambda = 0.0155\text{ m}

    You defined the Knudsen number upside down as Kn=λℓ\text{Kn} = \frac{\lambda}{\ell} instead of Kn=ℓλ\text{Kn} = \frac{\ell}{\lambda}. Because Kn\text{Kn} represents the ratio of the mean free path to the characteristic physical length scale (the acoustic wavelength λ\lambda), the threshold condition gives ℓcrit=Kn⋅λ=0.0155 m\ell_{\text{crit}} = \text{Kn} \cdot \lambda = 0.0155\text{ m}.

  3. Step 3

    Pcrit=kBT2πdm2ℓcrit=1.38×10−23×2802×π×(3.70×10−10)2×1.55=0.00291 PaP_{\text{crit}} = \frac{k_B T}{\sqrt{2}\pi d_m^2 \ell_{\text{crit}}} = \frac{1.38 \times 10^{-23} \times 280}{\sqrt{2} \times \pi \times (3.70 \times 10^{-10})^2 \times 1.55} = 0.00291\text{ Pa}

    Correct

    Pcrit=kBT2πdm2ℓcrit=1.38×10−23×2802π(3.70×10−10)2(0.0155)≈0.411 PaP_{\text{crit}} = \frac{k_B T}{\sqrt{2}\pi d_m^2 \ell_{\text{crit}}} = \frac{1.38 \times 10^{-23} \times 280}{\sqrt{2}\pi (3.70 \times 10^{-10})^2 (0.0155)} \approx 0.411\text{ Pa}

    Your rearranged pressure equation is algebraically correct, but substituting your inflated value of ℓcrit=1.55 m\ell_{\text{crit}} = 1.55\text{ m} rather than 0.0155 m0.0155\text{ m} carried the error into your final pressure.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the relationship λ=vf\lambda = \frac{v}{f} to determine the wavelength of the sound wave.

You correctly rearranged the kinetic-theory mean free path formula to solve for pressure PP.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Knudsen Number Ratio

You set Kn=λℓ\text{Kn} = \frac{\lambda}{\ell} instead of Kn=ℓλ\text{Kn} = \frac{\ell}{\lambda} when setting up the continuum breakdown threshold.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing which scale belongs in the numerator of dimensionless transport numbers. The Knudsen number Kn=ℓL\text{Kn} = \frac{\ell}{L} always places the microscopic mean free path ℓ\ell in the numerator and the macroscopic macroscopic/wave scale L=λL = \lambda in the denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensionless Ratio Check
  • The Knudsen number Kn\text{Kn} compares microscopic particle travel distance to macroscopic system scale: Kn=microscopicmacroscopic=ℓL\text{Kn} = \frac{\text{microscopic}}{\text{macroscopic}} = \frac{\ell}{L}.

  • Always check whether small Kn\text{Kn} means continuum (dense gas, tiny mean free path ℓ≪L\ell \ll L). If ℓ\ell were in the denominator, dense gas would produce a huge number instead of near zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the given definition Kn=ℓλ=0.100\text{Kn} = \frac{\ell}{\lambda} = 0.100.

  2. Solve for the critical mean free path: ℓcrit=0.100×0.155 m=0.0155 m\ell_{\text{crit}} = 0.100 \times 0.155\text{ m} = 0.0155\text{ m}.

  3. Substitute ℓcrit=0.0155 m\ell_{\text{crit}} = 0.0155\text{ m} into Pcrit=kBT2πdm2ℓcritP_{\text{crit}} = \frac{k_B T}{\sqrt{2}\pi d_m^2 \ell_{\text{crit}}}.

  4. Calculate: Pcrit=(1.38×10−23 J/K)(280 K)2π(3.70×10−10 m)2(0.0155 m)=3.864×10−219.414×10−21≈0.411 PaP_{\text{crit}} = \frac{(1.38 \times 10^{-23}\text{ J/K})(280\text{ K})}{\sqrt{2}\pi (3.70 \times 10^{-10}\text{ m})^2 (0.0155\text{ m})} = \frac{3.864 \times 10^{-21}}{9.414 \times 10^{-21}} \approx 0.411\text{ Pa}.

Final answer

(a) λ=0.155 m\lambda = 0.155\text{ m}; (b) ℓcrit=0.0155 m\ell_{\text{crit}} = 0.0155\text{ m}; (c) Pcrit=0.411 PaP_{\text{crit}} = 0.411\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the structural definition of the Knudsen number as Kn=ℓL\text{Kn} = \frac{\ell}{L} (microscopic over macroscopic).

  • Verify limiting behaviors: continuum regime requires ℓ≪L\ell \ll L, so Kn→0\text{Kn} \to 0 in dense media.

  • Rework Part (c) using the corrected ℓcrit\ell_{\text{crit}} to verify how an inverse relationship scales the pressure.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the molecular diameter d_m when calculating the collision cross section, leading to an incorrect critical pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ=vf=3102.00×103=0.155 m\lambda = \frac{v}{f} = \frac{310}{2.00 \times 10^3} = 0.155\text{ m}

  2. Step 2

    ℓcrit=Kn×λ=0.100×0.155=0.0155 m\ell_{\text{crit}} = \text{Kn} \times \lambda = 0.100 \times 0.155 = 0.0155\text{ m}

  3. Step 3

    Pcrit=kBT2πdmℓcritP_{\text{crit}} = \frac{k_B T}{\sqrt{2}\pi d_m \ell_{\text{crit}}}

    Correct

    Pcrit=kBT2πdm2ℓcritP_{\text{crit}} = \frac{k_B T}{\sqrt{2}\pi d_m^2 \ell_{\text{crit}}}

    You omitted the square on the molecular diameter dmd_m. The collision cross section is proportional to the area πdm2\pi d_m^2, not the diameter dmd_m.

  4. Step 4

    Pcrit=1.38×10−23×2802×π×3.70×10−10×0.0155⟹Pcrit=3.864×10−212.548×10−10=1.52×10−11 PaP_{\text{crit}} = \frac{1.38 \times 10^{-23} \times 280}{\sqrt{2} \times \pi \times 3.70 \times 10^{-10} \times 0.0155} ⟹ P_{\text{crit}} = \frac{3.864 \times 10^{-21}}{2.548 \times 10^{-10}} = 1.52 \times 10^{-11}\text{ Pa}

    Correct

    Pcrit=(1.38×10−23 J/K)(280 K)2π(3.70×10−10 m)2(0.0155 m)≈0.411 PaP_{\text{crit}} = \frac{(1.38 \times 10^{-23}\text{ J/K})(280\text{ K})}{\sqrt{2}\pi (3.70 \times 10^{-10}\text{ m})^2 (0.0155\text{ m})} \approx 0.411\text{ Pa}

    Your arithmetic correctly followed the formula you wrote, but because dmd_m was not squared, the resulting pressure differs from the true critical pressure by a factor of dmd_m.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the wave speed equation to compute the wavelength.

You properly applied the Knudsen threshold definition to identify the critical mean free path.

You accurately substituted values and evaluated the arithmetic corresponding to your written algebraic expression.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted exponent in formula

You dropped the exponent 22 on dmd_m, writing 2πdmℓ\sqrt{2}\pi d_m \ell instead of 2πdm2ℓ\sqrt{2}\pi d_m^2 \ell.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You lost track of the collision cross-section area term πdm2\pi d_m^2 when rearranging the kinetic theory expression for mean free path, mistaking the linear diameter for an area term.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Dimensional Consistency
  • Every term representing a collision cross section must have dimensions of area (m2\text{m}^2).

  • Verify units before computing: dm2ℓd_m^2 \ell produces m3\text{m}^3, which balances with J/m3=Pa\text{J}/\text{m}^3 = \text{Pa}.

Kinetic Theory Collision Cross Section
  • The mean free path formula is ℓ=kBT2πdm2P\ell = \frac{k_B T}{\sqrt{2}\pi d_m^2 P}.

  • Always double-check that the molecular diameter is squared whenever calculating mean free path or pressure.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the rearranged expression with the squared diameter: Pcrit=kBT2πdm2ℓcritP_{\text{crit}} = \frac{k_B T}{\sqrt{2}\pi d_m^2 \ell_{\text{crit}}}.

  2. Substitute dm=3.70×10−10 md_m = 3.70 \times 10^{-10}\text{ m} and square it: (3.70×10−10 m)2=1.369×10−19 m2(3.70 \times 10^{-10}\text{ m})^2 = 1.369 \times 10^{-19}\text{ m}^2.

  3. Evaluate the denominator: 2π(1.369×10−19 m2)(0.0155 m)≈9.414×10−21 m3\sqrt{2}\pi (1.369 \times 10^{-19}\text{ m}^2)(0.0155\text{ m}) \approx 9.414 \times 10^{-21}\text{ m}^3.

  4. Divide the numerator 3.864×10−21 J3.864 \times 10^{-21}\text{ J} by the denominator 9.414×10−21 m39.414 \times 10^{-21}\text{ m}^3.

Final answer

Pcrit≈0.411 PaP_{\text{crit}} \approx 0.411\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice checking the units of your rearranged formulas to catch missing powers before numerical substitution.

  • Review kinetic theory formulas to reinforce why molecular collision frequency depends on cross-sectional area σ=πdm2\sigma = \pi d_m^2.

OverviewACEpath Teacher's Diagnosis

03 The student omits the factor of √2 in the denominator of the mean free path formula, overestimating the critical pressure by a factor of √2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ=vf=310(2.00×103)=0.155 m\lambda = \frac{v}{f} = \frac{310}{(2.00\times 10^3)} = 0.155\text{ m}

  2. Step 2

    ℓcrit=Kn×λ=0.100×0.155=0.0155 m\ell_{\text{crit}} = \text{Kn} \times \lambda = 0.100 \times 0.155 = 0.0155\text{ m}

  3. Step 3

    Pcrit=kBTπdm2ℓcrit  ⟹  Pcrit=(1.38×10−23×280)π×(3.70×10−10)2×0.0155P_{\text{crit}} = \frac{k_B T}{\pi d_m^2 \ell_{\text{crit}}} \implies P_{\text{crit}} = \frac{(1.38\times 10^{-23}\times 280)}{\pi \times (3.70\times 10^{-10})^2 \times 0.0155}

    Correct

    Pcrit=kBT2πdm2ℓcrit=1.38×10−23×2802π(3.70×10−10)2(0.0155)P_{\text{crit}} = \frac{k_B T}{\sqrt{2}\pi d_m^2 \ell_{\text{crit}}} = \frac{1.38\times 10^{-23}\times 280}{\sqrt{2}\pi (3.70\times 10^{-10})^2 (0.0155)}

    You omitted the factor of 2\sqrt{2} in the denominator of the kinetic theory expression for mean free path.

  4. Step 4

    Pcrit=(3.864×10−21)9.397×10−21=0.411 PaP_{\text{crit}} = \frac{(3.864\times 10^{-21})}{9.397\times 10^{-21}} = 0.411\text{ Pa}

    Correct

    Pcrit=3.864×10−21 J9.41×10−21 m3≈0.411 PaP_{\text{crit}} = \frac{3.864\times 10^{-21}\text{ J}}{9.41\times 10^{-21}\text{ m}^3} \approx 0.411\text{ Pa}

    Your numerical value of 0.411 Pa0.411\text{ Pa} is correct, but your written denominator 9.397×10−219.397\times 10^{-21} does not match the expression written directly above it because it implicitly re-inserts the missing 2\sqrt{2} factor.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the wave speed relation λ=v/f\lambda = v / f to calculate the wavelength in part (a).

You accurately converted the Knudsen breakdown condition Kn=ℓ/λ\text{Kn} = \ell / \lambda into the critical mean free path in part (b).

You correctly identified all relevant physical constants and temperature values for kinetic gas theory.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing relative velocity factor in kinetic mean free path

You dropped the factor of 2\sqrt{2} in the denominator when rearranging the formula ℓ=kBT2πdm2P\ell = \frac{k_B T}{\sqrt{2}\pi d_m^2 P} for pressure.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In kinetic theory, the factor of 2\sqrt{2} accounts for the relative motion of colliding particles rather than stationary collision targets; omitting it changes the effective cross-sectional collision frequency by roughly 41%41\%.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Mean Free Path Formula
  • The standard mean free path for an ideal gas with identical moving molecules is ℓ=kBT2πdm2P\ell = \frac{k_B T}{\sqrt{2}\pi d_m^2 P}.

  • Verify that 2\sqrt{2} is present in the denominator of both your algebraic rearrangement and your numerical substitution.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the rearranged expression with the correct geometric factor: Pcrit=kBT2πdm2ℓcritP_{\text{crit}} = \frac{k_B T}{\sqrt{2}\pi d_m^2 \ell_{\text{crit}}}.

  2. Substitute the parameters explicitly: Pcrit=(1.38×10−23 J/K)(280 K)2π(3.70×10−10 m)2(0.0155 m)P_{\text{crit}} = \frac{(1.38\times 10^{-23}\text{ J/K})(280\text{ K})}{\sqrt{2}\pi (3.70\times 10^{-10}\text{ m})^2 (0.0155\text{ m})}.

  3. Compute the numerator and denominator: 3.864×10−21 J9.41×10−21 m3≈0.411 Pa\frac{3.864\times 10^{-21}\text{ J}}{9.41\times 10^{-21}\text{ m}^3} \approx 0.411\text{ Pa}.

Final answer

Pcrit=0.411 PaP_{\text{crit}} = 0.411\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check algebraic rearrangements of kinetic theory expressions before substituting values.

  • Ensure written steps and calculator entries match so intermediate denominators remain clear and consistent.

Lock it in

Similar question

01

An ultrasound transducer emits sound waves with wavelength λ=1.20 mm\lambda = 1.20\text{ mm} in a rarefied gas chamber. If continuum wave mechanics breaks down at Kn=0.150\text{Kn} = 0.150, find the critical mean free path ℓcrit\ell_{\text{crit}}.

Answer

ℓcrit=Kn⋅λ=0.150×1.20 mm=0.180 mm=1.80×10−4 m\ell_{\text{crit}} = \text{Kn} \cdot \lambda = 0.150 \times 1.20\text{ mm} = 0.180\text{ mm} = 1.80 \times 10^{-4}\text{ m}.

02

A sound wave of frequency f=1.00 kHzf = 1.00\text{ kHz} travels at v=340 m/sv = 340\text{ m/s} in nitrogen gas (dm=3.64×10−10 md_m = 3.64 \times 10^{-10}\text{ m}) at T=300 KT = 300\text{ K}. Sound propagation fails when Kn=ℓλ≥0.100\text{Kn} = \frac{\ell}{\lambda} \ge 0.100. Calculate the threshold pressure PcritP_{\text{crit}} below which sound fails. Use kB=1.38×10−23 J/Kk_B = 1.38 \times 10^{-23}\text{ J/K}.

Answer
  1. Wavelength: λ=vf=3401000=0.340 m\lambda = \frac{v}{f} = \frac{340}{1000} = 0.340\text{ m}.
  2. Critical mean free path: ℓcrit=0.100×0.340 m=0.0340 m\ell_{\text{crit}} = 0.100 \times 0.340\text{ m} = 0.0340\text{ m}.
  3. Threshold pressure: Pcrit=kBT2πdm2ℓcrit=(1.38×10−23)(300)2π(3.64×10−10)2(0.0340)≈0.208 PaP_{\text{crit}} = \frac{k_B T}{\sqrt{2}\pi d_m^2 \ell_{\text{crit}}} = \frac{(1.38 \times 10^{-23})(300)}{\sqrt{2}\pi (3.64 \times 10^{-10})^2 (0.0340)} \approx 0.208\text{ Pa}.
03

In a planetary atmosphere, the temperature is T=150 KT = 150\text{ K} and the molecular diameter is dm=4.00×10−10 md_m = 4.00 \times 10^{-10}\text{ m}. At pressure P=1.00 PaP = 1.00\text{ Pa}, determine the maximum sound frequency fmaxf_{\text{max}} that can propagate before reaching the breakdown threshold Kn=ℓλ=0.100\text{Kn} = \frac{\ell}{\lambda} = 0.100, assuming a constant sound speed v=240 m/sv = 240\text{ m/s}.

Answer
  1. Mean free path: ℓ=kBT2πdm2P=(1.38×10−23)(150)2π(4.00×10−10)2(1.00)≈2.915×10−3 m\ell = \frac{k_B T}{\sqrt{2}\pi d_m^2 P} = \frac{(1.38 \times 10^{-23})(150)}{\sqrt{2}\pi (4.00 \times 10^{-10})^2 (1.00)} \approx 2.915 \times 10^{-3}\text{ m}.
  2. At breakdown, λmin=ℓKn=2.915×10−30.100=0.02915 m\lambda_{\text{min}} = \frac{\ell}{\text{Kn}} = \frac{2.915 \times 10^{-3}}{0.100} = 0.02915\text{ m}.
  3. Maximum frequency: fmax=vλmin=240 m/s0.02915 m≈8.23×103 Hz=8.23 kHzf_{\text{max}} = \frac{v}{\lambda_{\text{min}}} = \frac{240\text{ m/s}}{0.02915\text{ m}} \approx 8.23 \times 10^3\text{ Hz} = 8.23\text{ kHz}.
Loading workspace…