Resources

A simple pendulum has a natural small-angle period of T0=2.00 sT_0 = 2.00\text{ s}. When released from a finite initial angular amplitude θ0\theta_0, the exact period of a simple pendulum is given by the first-order Taylor expansion correction T≈T0(1+116θ02)T \approx T_0 \left(1 + \frac{1}{16}\theta_0^2\right), where θ0\theta_0 is measured in radians. Determine the threshold angle θ0\theta_0 (in both radians and degrees) at which the relative difference T−T0T0\frac{T - T_0}{T_0} reaches exactly 1.50%1.50\%, and calculate the corresponding actual period TT at this critical boundary.

Answer and steps

Final answer

θ0=0.490 rad=28.1∘\theta_0 = 0.490\text{ rad} = 28.1^\circ; T=2.03 sT = 2.03\text{ s}

Steps

Step 1: Relate the relative period increase to the amplitude angle

The small-angle approximation assumes sin⁡θ≈θ\sin\theta \approx \theta, leading to the natural period T0T_0. For larger initial amplitudes θ0\theta_0, the period increases according to the given approximation:

T≈T0(1+116θ02)T \approx T_0 \left(1 + \frac{1}{16}\theta_0^2\right)

Subtracting T0T_0 and dividing by T0T_0 yields the fractional (or relative) difference:

T−T0T0=116θ02\frac{T - T_0}{T_0} = \frac{1}{16}\theta_0^2

The target relative difference is 1.50%1.50\%, which in decimal form is:

T−T0T0=0.0150\frac{T - T_0}{T_0} = 0.0150


Step 2: Solve for the threshold angle θ0\theta_0

Equating the two expressions:

116θ02=0.0150\frac{1}{16}\theta_0^2 = 0.0150

Multiply both sides by 1616:

θ02=16⋅0.0150=0.240\theta_0^2 = 16 \cdot 0.0150 = 0.240

Take the positive square root to find θ0\theta_0 in radians:

θ0=0.240≈0.4899 rad≈0.490 rad\theta_0 = \sqrt{0.240} \approx 0.4899\text{ rad} \approx 0.490\text{ rad}

Now convert θ0\theta_0 into degrees:

θ0=0.4899 rad⋅(180∘π rad)≈28.07∘≈28.1∘\theta_0 = 0.4899\text{ rad} \cdot \left(\frac{180^\circ}{\pi\text{ rad}}\right) \approx 28.07^\circ \approx 28.1^\circ

Common Pitfall: The series expansion T≈T0(1+116θ02)T \approx T_0 \left(1 + \frac{1}{16}\theta_0^2\right) is derived using radian measure. Inputting degrees directly into the formula will result in an incorrect period.


Step 3: Calculate the actual period TT at this angle

Using the definition of the relative difference with T0=2.00 sT_0 = 2.00\text{ s}:

T=T0(1+0.0150)=2.00 s⋅1.0150=2.03 sT = T_0 \left(1 + 0.0150\right) = 2.00\text{ s} \cdot 1.0150 = 2.03\text{ s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to take the square root of θ₀² after solving for it, mistaking θ₀² for θ₀.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T−T0T0=116θ02=0.0150\frac{T - T_0}{T_0} = \frac{1}{16}\theta_0^2 = 0.0150

  2. Step 2

    θ0=16×0.0150=0.240 rad\theta_0 = 16 \times 0.0150 = 0.240\text{ rad}

    Correct

    θ02=16×0.0150=0.240  ⟹  θ0=0.240≈0.490 rad\theta_0^2 = 16 \times 0.0150 = 0.240 \implies \theta_0 = \sqrt{0.240} \approx 0.490\text{ rad}

    When multiplying both sides by 1616, the left-hand side is θ02\theta_0^2, not θ0\theta_0. You need to take the square root of 0.2400.240 to find θ0\theta_0.

  3. Step 3

    θ0=0.240×180π=13.8∘\theta_0 = 0.240 \times \frac{180}{\pi} = 13.8^\circ

    Correct

    θ0=0.490 rad×180∘π rad≈28.1∘\theta_0 = 0.490\text{ rad} \times \frac{180^\circ}{\pi\text{ rad}} \approx 28.1^\circ

    Your conversion factor 180∘π\frac{180^\circ}{\pi} is correct, but your result is affected by the missing square root from the previous step.

  4. Step 4

    T=2.00×(1+0.0150)=2.03 sT = 2.00 \times (1 + 0.0150) = 2.03\text{ s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly expressed the 1.50%1.50\% relative period difference as the decimal 0.01500.0150.

You set up the Taylor series correction term 116θ02\frac{1}{16}\theta_0^2 accurately.

You applied the correct conversion factor between radians and degrees.

You computed the actual period TT accurately from the fractional increase.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Square Root

You dropped the square exponent on θ02\theta_0^2, equating θ0\theta_0 directly to 0.2400.240 instead of evaluating 0.240\sqrt{0.240}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Losing track of variable powers during algebraic isolation: when clearing a denominator next to a squared variable, treating the isolated product as the base variable rather than its square.

REASONING PATH
Your ACEpath teacher’s suggested approach
Track Variable Powers
  • When isolating x2x^2 in an equation cx2=kc x^2 = k, write x2=kcx^2 = \frac{k}{c} explicitly before solving for xx.

  • Always write the exponent explicitly on the isolated side before taking the root: θ02=0.240  ⟹  θ0=0.240\theta_0^2 = 0.240 \implies \theta_0 = \sqrt{0.240}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. θ02=16×0.0150=0.240\theta_0^2 = 16 \times 0.0150 = 0.240

  2. θ0=0.240≈0.490 rad\theta_0 = \sqrt{0.240} \approx 0.490\text{ rad}

  3. θ0=0.4899 rad×180∘π rad≈28.1∘\theta_0 = 0.4899\text{ rad} \times \frac{180^\circ}{\pi\text{ rad}} \approx 28.1^\circ

Final answer

θ0=0.490 rad=28.1∘\theta_0 = 0.490\text{ rad} = 28.1^\circ; T=2.03 sT = 2.03\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • When solving formulas containing squared terms like θ02\theta_0^2, circle or highlight the exponent to ensure you execute the final square root operation.

  • Perform a sanity check on unit dimensions: an angular displacement squared has units of rad2\text{rad}^2, so taking the square root is necessary to recover rad\text{rad}.

OverviewACEpath Teacher's Diagnosis

02 The student treats the percentage 1.50% as 0.150 instead of 0.0150, resulting in an overestimated angle.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T−T0T0=116θ02=0.150\frac{T - T_0}{T_0} = \frac{1}{16}\theta_0^2 = 0.150

    Correct

    T−T0T0=116θ02=0.0150\frac{T - T_0}{T_0} = \frac{1}{16}\theta_0^2 = 0.0150

    To convert a percentage to a decimal, divide by 100100. Thus, 1.50%=1.50100=0.01501.50\% = \frac{1.50}{100} = 0.0150, not 0.1500.150 (which corresponds to 15.0%15.0\%).

  2. Step 2

    θ02=16×0.150=2.40  ⟹  θ0=2.40=1.55 rad\theta_0^2 = 16 \times 0.150 = 2.40 \implies \theta_0 = \sqrt{2.40} = 1.55\text{ rad}

    Correct

    θ02=16×0.0150=0.240  ⟹  θ0=0.240≈0.490 rad\theta_0^2 = 16 \times 0.0150 = 0.240 \implies \theta_0 = \sqrt{0.240} \approx 0.490\text{ rad}

    Your algebraic isolation and square-root evaluation were performed correctly on your value, but the result is affected by the decimal error in Step 1.

  3. Step 3

    θ0=1.55×180∘π=88.8∘\theta_0 = 1.55 \times \frac{180^\circ}{\pi} = 88.8^\circ

    Correct

    θ0=0.4899×180∘π≈28.1∘\theta_0 = 0.4899 \times \frac{180^\circ}{\pi} \approx 28.1^\circ

    You used the correct radian-to-degree conversion factor, but substituting the incorrect value of θ0\theta_0 led to 88.8∘88.8^\circ instead of 28.1∘28.1^\circ.

  4. Step 4

    T=2.00×(1+0.150)=2.30 sT = 2.00 \times (1 + 0.150) = 2.30\text{ s}

    Correct

    T=2.00×(1+0.0150)=2.03 sT = 2.00 \times (1 + 0.0150) = 2.03\text{ s}

    Your period substitution and arithmetic were consistent with your chosen decimal, but evaluating with the correct decimal gives 2.03 s2.03\text{ s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly isolated the fractional difference term T−T0T0=116θ02\frac{T - T_0}{T_0} = \frac{1}{16}\theta_0^2 from the given period approximation.

You used the correct conversion factor 180∘π\frac{180^\circ}{\pi} to convert radians to degrees.

You carried out all subsequent algebraic operations and square roots accurately based on your initial setup.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Percentage-to-decimal conversion slip

You transcribed 1.50%1.50\% as 0.1500.150 rather than shifting the decimal point two places to the left to get 0.01500.0150.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a single decimal shift (15%=0.1515\% = 0.15) with a two-place shift when the percentage already contains a decimal point (1.50%=0.01501.50\% = 0.0150).

REASONING PATH
Your ACEpath teacher’s suggested approach
Converting Percentages with Decimals
  • x%=x100=x×10−2x\% = \frac{x}{100} = x \times 10^{-2}

  • Always shift the decimal point two places to the left: 1.50%→0.01501.50\% \to 0.0150, adding a leading zero after the decimal point as a placeholder.

Physical Reality Check for Taylor Expansions
  • Taylor series expansions like T≈T0(1+116θ02)T \approx T_0\left(1 + \frac{1}{16}\theta_0^2\right) are valid only for small angles where θ02≪1\theta_0^2 \ll 1.

  • Notice that an angle of 88.8∘≈1.55 rad88.8^\circ \approx 1.55\text{ rad} is nearly horizontal, where the simple small-angle correction breaks down entirely, signaling an arithmetic error.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the percentage change correctly: 1.50%=1.50100=0.01501.50\% = \frac{1.50}{100} = 0.0150.

  2. Set up the equation: 116θ02=0.0150\frac{1}{16}\theta_0^2 = 0.0150.

  3. Solve for θ0\theta_0 in radians: θ02=16×0.0150=0.240  ⟹  θ0=0.240≈0.490 rad\theta_0^2 = 16 \times 0.0150 = 0.240 \implies \theta_0 = \sqrt{0.240} \approx 0.490\text{ rad}.

  4. Convert to degrees: θ0=0.4899×180∘π≈28.1∘\theta_0 = 0.4899 \times \frac{180^\circ}{\pi} \approx 28.1^\circ.

  5. Compute the corrected period: T=2.00 s×(1+0.0150)=2.03 sT = 2.00\text{ s} \times (1 + 0.0150) = 2.03\text{ s}.

Final answer

θ0=0.490 rad=28.1∘\theta_0 = 0.490\text{ rad} = 28.1^\circ; T=2.03 sT = 2.03\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check percentage conversions whenever the percentage value is between 1%1\% and 9%9\%, ensuring there is always a zero in the tenths place (0.0x0.0x).

  • Perform a sanity check on the calculated amplitude: if a perturbation or small-angle approximation yields an angle near 90∘90^\circ, verify the input values.

OverviewACEpath Teacher's Diagnosis

03 The student converts the angle to degrees by multiplying by π/180 instead of 180/π, confusing the radian-degree conversion factor.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (1/16)θ02=0.0150  ⟹  θ02=0.240  ⟹  θ0=0.240=0.490 rad(1/16)\theta_0^2 = 0.0150 \implies \theta_0^2 = 0.240 \implies \theta_0 = \sqrt{0.240} = 0.490\text{ rad}

  2. Step 2

    θ0=0.490×π180=0.00855∘\theta_0 = 0.490 \times \frac{\pi}{180} = 0.00855^\circ

    Correct

    θ0=0.490 rad×180∘π rad≈28.1∘\theta_0 = 0.490\text{ rad} \times \frac{180^\circ}{\pi\text{ rad}} \approx 28.1^\circ

    To convert from radians to degrees, you must multiply by 180∘π\frac{180^\circ}{\pi} because π rad=180∘\pi\text{ rad} = 180^\circ. Multiplying by π180\frac{\pi}{180} converts degrees to radians.

  3. Step 3

    T=2.00×(1+0.0150)=2.03 sT = 2.00 \times (1 + 0.0150) = 2.03\text{ s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the relative period change T−T0T0\frac{T - T_0}{T_0} to 116θ02\frac{1}{16}\theta_0^2.

You accurately computed the threshold amplitude in radians as θ0=0.490 rad\theta_0 = 0.490\text{ rad}.

You calculated the correct modified period T=2.03 sT = 2.03\text{ s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted radian-to-degree conversion factor

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the conversion factor for radians-to-degrees with degrees-to-radians, multiplying by π180\frac{\pi}{180} instead of 180∘π\frac{180^\circ}{\pi}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Cancellation Check
  • Set up unit fractions so that the unwanted unit cancels out: rad×180∘π rad=degrees\text{rad} \times \frac{180^\circ}{\pi\text{ rad}} = \text{degrees}.

  • Always write the units explicitly in the conversion fraction and cancel rad\text{rad}.

Order of Magnitude Sanity Check
  • Since 1 rad≈57.3∘1\text{ rad} \approx 57.3^\circ, an angle of roughly 0.5 rad0.5\text{ rad} must be around 28∘28^\circ to 29∘29^\circ, never a tiny fraction of a degree.

  • Before writing your final answer, verify that the numerical value in degrees is roughly 5757 times larger than the value in radians.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. θ0=0.4899 rad×180∘π rad\theta_0 = 0.4899\text{ rad} \times \frac{180^\circ}{\pi\text{ rad}}

  2. θ0≈28.07∘≈28.1∘\theta_0 \approx 28.07^\circ \approx 28.1^\circ

Final answer

θ0=0.490 rad=28.1∘\theta_0 = 0.490\text{ rad} = 28.1^\circ; T=2.03 sT = 2.03\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review unit cancellation using dimensional analysis so conversion factors are placed right-side up.

  • Perform a quick order-of-magnitude check using 1 rad≈57.3∘1\text{ rad} \approx 57.3^\circ to ensure the degree measure increases relative to radians.

Lock it in

Similar question

01

A simple pendulum with small-angle period T0=1.00 sT_0 = 1.00\text{ s} has a period increase of 1.00%1.00\%, so that T−T0T0=0.0100\frac{T - T_0}{T_0} = 0.0100. Using T≈T0(1+116θ02)T \approx T_0\left(1 + \frac{1}{16}\theta_0^2\right), find the amplitude θ0\theta_0 in radians and the new period TT.

Answer

θ0=0.400 rad\theta_0 = 0.400\text{ rad}, T=1.01 sT = 1.01\text{ s}. Key steps: 116θ02=0.0100  ⟹  θ02=0.160  ⟹  θ0=0.160=0.400 rad\frac{1}{16}\theta_0^2 = 0.0100 \implies \theta_0^2 = 0.160 \implies \theta_0 = \sqrt{0.160} = 0.400\text{ rad}; T=1.00 s×1.0100=1.01 sT = 1.00\text{ s} \times 1.0100 = 1.01\text{ s}.

02

At what initial release angle θ0\theta_0 (in degrees) does a simple pendulum experience a 4.00%4.00\% increase in its period compared to its small-angle approximation?

Answer

θ0≈45.8∘\theta_0 \approx 45.8^\circ. Key steps: 116θ02=0.0400  ⟹  θ02=0.640  ⟹  θ0=0.640≈0.800 rad\frac{1}{16}\theta_0^2 = 0.0400 \implies \theta_0^2 = 0.640 \implies \theta_0 = \sqrt{0.640} \approx 0.800\text{ rad}. Converting to degrees: 0.800×180∘π≈45.84∘≈45.8∘0.800 \times \frac{180^\circ}{\pi} \approx 45.84^\circ \approx 45.8^\circ.

03

A grandfather clock is calibrated using the small-angle approximation T0=2.000 sT_0 = 2.000\text{ s}. If the pendulum swings with an amplitude of θ0=30.0∘\theta_0 = 30.0^\circ, calculate its fractional period error T−T0T0\frac{T - T_0}{T_0} using the first-order correction, and determine how many seconds it loses per hour.

Answer

Fractional error ≈1.71%\approx 1.71\%; loses ≈61.6 s\approx 61.6\text{ s} per hour. Key steps: Convert angle to radians: θ0=30∘×π180∘=π6≈0.5236 rad\theta_0 = 30^\circ \times \frac{\pi}{180^\circ} = \frac{\pi}{6} \approx 0.5236\text{ rad}. Fractional increase: ΔTT0=116θ02=116(π6)2=π2576≈0.01712\frac{\Delta T}{T_0} = \frac{1}{16}\theta_0^2 = \frac{1}{16}\left(\frac{\pi}{6}\right)^2 = \frac{\pi^2}{576} \approx 0.01712 (1.712%1.712\%). Time lost per hour: 3600 s×ΔTT≈3600 s×0.01712≈61.6 s3600\text{ s} \times \frac{\Delta T}{T} \approx 3600\text{ s} \times 0.01712 \approx 61.6\text{ s}.

Loading workspace…