Resources
In an engineering physics laboratory experiment, students calibrate a compound differential pulley hoist (chain hoist) designed to lift heavy loads. An aluminum test block of mass is suspended from the traveling block. A digital force sensor attached to the continuous pull chain records a steady tension force of while the effort chain is pulled through a measured distance of . A laser displacement sensor simultaneously measures the vertical rise of the aluminum block as . Using , compute: (a) the work output delivered to the load, (b) the work input supplied to the pull chain, and (c) the measured mechanical efficiency of the chain hoist to four significant figures.
Answer and steps
Final answer
(a) ; (b) ; (c)
Steps
Calculate the work output ()
The work output of the machine is the useful gravitational potential energy gained by the load as it is lifted through height .
The weight of the aluminum load is:
Substitute the given values:
The work output delivered to lift the load vertically by is:
Rounding to four significant figures gives:
Calculate the work input ()
The work input is the total energy supplied by the operator via the effort force exerted over the distance through which the chain is pulled:
Substitute the given values:
Rounding to four significant figures gives:
Compute the mechanical efficiency ()
The mechanical efficiency of a machine is the ratio of useful work output to total work input, expressed as a percentage:
Substitute the unrounded calculated values to avoid intermediate rounding error:
(Common pitfall: Do not calculate efficiency by simply comparing forces ; the distances over which the forces act are different. Always evaluate efficiency via the ratio of work or energy.)
Typical errors
01 The student forgets to multiply the mass by gravitational acceleration g when calculating the work output, treating the numerical mass directly as the load force and resulting in W_out = 182.4 J and η = 7.624%.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Work is defined as force multiplied by displacement (). The force required to lift the mass at constant speed is its weight , not simply its mass . Multiplying does not yield joules .
- Step 2
- Step 3Correct
Your efficiency formula and calculation follow correctly from your values, but your result is incorrect because it propagates the erroneous from Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the work input using .
You used the correct definition of mechanical efficiency as the ratio of work output to work input.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of , forgetting to convert mass into gravitational force.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing mass (, in kilograms) with force or weight (, in newtons). Because work requires a force acting through a distance, lifting a mass vertically against gravity requires overcoming its weight.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check physical dimensions of Work
Always check your units before multiplying: mass (kg) times height (m) gives , which is not energy. Multiply by to obtain newtons before multiplying by distance.
- Reasonableness of Mechanical Efficiency
Well-designed heavy-lifting hoists typically operate with efficiencies between and .
An efficiency of is an immediate red flag that the work output was underestimated by approximately a factor of (close to the numerical value of ).
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the load weight: .
Calculate the true work output: .
Compute efficiency using the unrounded values: .
(a) ; (b) ; (c)
02 The student inverts the definition of mechanical efficiency as work input divided by work output, calculating η = W_in / W_out = 133.8%.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You inverted the efficiency formula as . Mechanical efficiency is the ratio of useful work output to total work input, , which cannot exceed for a passive machine.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly computed the gravitational load force using .
You calculated the work output delivered to the load accurately.
You calculated the work input supplied by the effort force accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou swapped the numerator and denominator in the efficiency formula, setting input work over output work. By the conservation of energy, a simple machine cannot output more energy than was put in, so efficiency must be .
REASONING PATH
Your ACEpath teacher’s suggested approach- Efficiency Definition
Efficiency represents the fraction of supplied energy that performs useful work: .
Always place what you get (useful output) on top and what you pay (total input) on the bottom.
- Reality Check
For any passive mechanical system, real friction ensures , meaning .
If your calculated efficiency exceeds , immediately check whether you inverted the ratio.
CORRECTED PATH
ACEpath Teacher's DemonstrationState the definition of efficiency: .
Substitute the unrounded calculated values: .
Evaluate and round to four significant figures: .
(a) ; (b) ; (c)
03 The student swaps the effort distance and load displacement when calculating work, pairing the effort force with the load rise and load weight with the effort distance.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You multiplied the load force by the effort pull distance () instead of the vertical displacement of the load ().
- Step 3Correct
You multiplied the effort force by the load height () instead of the chain pull distance ().
- Step 4Correct
You stated the correct definition for mechanical efficiency, but substituting the swapped work values produced an erroneous result.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly computed the weight of the load using .
You correctly identified the mechanical efficiency formula .
You carried through the arithmetic evaluations accurately according to your chosen pairings.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou misassociated the two displacements, pairing the applied effort force with the load's vertical rise and the load's weight with the chain's pulled length. For any machine, work input must be calculated entirely from effort quantities () and work output entirely from load quantities ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Match forces with their own displacements
and
Always pair the effort force strictly with the distance the operator moves the input mechanism, and pair the load force strictly with the distance the load actually travels.
- Sanity-check efficiency for passive machines
Real mechanical systems always experience friction, so (and ideally ).
If your calculated efficiency exceeds , immediately pause to check whether work input and work output were inverted or their distance variables were swapped.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the work output using the load height: .
Calculate the work input using the effort pull distance: .
Compute the mechanical efficiency: .
(a) ; (b) ; (c) $\eta = 74.72%
Lock it in
What is the formula for the work required to lift an object of mass vertically at constant speed through a height near Earth's surface?
. Work is force times distance, and the lifting force equals the object's weight , not just its mass .
Similar question
A motorized winch lifts an engine block to a vertical height of . During the lift, the electric motor consumes of electrical energy. Taking , find (a) the work output delivered to the engine and (b) the overall efficiency of the winch.
Answer
(a) . (b) .
A worker uses an inclined ramp of length to slide a crate of mass up onto a loading dock of height . The worker applies a constant pushing force of parallel to the incline. Using , calculate (a) (useful gravitational work), (b) (work done by the worker), and (c) the efficiency of the inclined plane.
Answer
(a) . (b) . (c) .
A hydraulic lift has a mechanical efficiency of . It is used to elevate a vehicle of mass by a vertical distance of at constant speed. Using , determine (a) the useful work output , (b) the required work input , and (c) the energy dissipated as thermal energy due to friction and fluid resistance.
Answer
(a) . (b) . (c) .