Resources

An electric delivery vehicle begins from rest at position x(0)=0 mx(0) = 0\text{ m} and travels along a straight corridor for 15.0 s15.0\text{ s}. Its acceleration-time graph a(t)a(t) shows a constant acceleration of a=+1.60 m/s2a = +1.60\text{ m/s}^2 from t=0 st = 0\text{ s} to t=5.0 st = 5.0\text{ s}, followed by zero acceleration (a=0 m/s2a = 0\text{ m/s}^2) from t=5.0 st = 5.0\text{ s} to t=10.0 st = 10.0\text{ s}. From t=10.0 st = 10.0\text{ s} to t=15.0 st = 15.0\text{ s}, the vehicle undergoes constant braking acceleration abrakea_{\text{brake}}. High-precision telemetry reveals that the final position of the vehicle at t=15.0 st = 15.0\text{ s} is exactly x(15.0)=90.0 mx(15.0) = 90.0\text{ m}. Working backwards through the graphical kinematics, determine: (a) the vehicle's velocity at t=10.0 st = 10.0\text{ s}, and (b) the constant braking acceleration abrakea_{\text{brake}} applied during the final 5.0 s5.0\text{ s} interval.

Answer and steps

Final answer

(a) v(10.0)=8.00 m/sv(10.0) = 8.00\text{ m/s}; (b) abrake=−1.60 m/s2a_{\text{brake}} = -1.60\text{ m/s}^2

Steps

01

Analyze Motion in the First Interval (t=0 st = 0\text{ s} to t=5.0 st = 5.0\text{ s})

The vehicle starts from rest at the origin: x(0)=0 m,v(0)=0 m/sx(0) = 0\text{ m},\quad v(0) = 0\text{ m/s}

During this interval, it experiences a constant acceleration a1=+1.60 m/s2a_1 = +1.60\text{ m/s}^2. Using the kinematic equation for velocity: v(5.0)=v(0)+a1Δt1=0+(1.60 m/s2)(5.0 s)=8.00 m/sv(5.0) = v(0) + a_1 \Delta t_1 = 0 + (1.60\text{ m/s}^2)(5.0\text{ s}) = 8.00\text{ m/s}

The displacement Δx1\Delta x_1 during this interval is the area under the linear v–tv\text{–}t segment: Δx1=12a1(Δt1)2=12(1.60 m/s2)(5.0 s)2=20.0 m\Delta x_1 = \frac{1}{2} a_1 (\Delta t_1)^2 = \frac{1}{2}(1.60\text{ m/s}^2)(5.0\text{ s})^2 = 20.0\text{ m}


02

Determine Velocity and Position at t=10.0 st = 10.0\text{ s} (Part a)

From t=5.0 st = 5.0\text{ s} to t=10.0 st = 10.0\text{ s}, the acceleration is zero (a2=0 m/s2a_2 = 0\text{ m/s}^2). Because acceleration is zero, the vehicle cruises at constant velocity: v(10.0)=v(5.0)=8.00 m/sv(10.0) = v(5.0) = 8.00\text{ m/s}

The displacement Δx2\Delta x_2 during this constant-velocity interval is: Δx2=v(5.0)⋅Δt2=(8.00 m/s)(5.0 s)=40.0 m\Delta x_2 = v(5.0) \cdot \Delta t_2 = (8.00\text{ m/s})(5.0\text{ s}) = 40.0\text{ m}

The position of the vehicle at t=10.0 st = 10.0\text{ s} is: x(10.0)=x(0)+Δx1+Δx2=0 m+20.0 m+40.0 m=60.0 mx(10.0) = x(0) + \Delta x_1 + \Delta x_2 = 0\text{ m} + 20.0\text{ m} + 40.0\text{ m} = 60.0\text{ m}


03

Determine the Braking Acceleration abrakea_{\text{brake}} (Part b)

During the final interval from t=10.0 st = 10.0\text{ s} to t=15.0 st = 15.0\text{ s} (Δt3=5.0 s\Delta t_3 = 5.0\text{ s}), a constant braking deceleration brings the vehicle to rest (v(15.0)=0 m/sv(15.0) = 0\text{ m/s}).

Using the definition of acceleration: abrake=ΔvΔt3=v(15.0)−v(10.0)Δt3=0 m/s−8.00 m/s5.0 s=−1.60 m/s2a_{\text{brake}} = \frac{\Delta v}{\Delta t_3} = \frac{v(15.0) - v(10.0)}{\Delta t_3} = \frac{0\text{ m/s} - 8.00\text{ m/s}}{5.0\text{ s}} = -1.60\text{ m/s}^2

Verification with Displacement

Bringing the vehicle smoothly to rest with abrake=−1.60 m/s2a_{\text{brake}} = -1.60\text{ m/s}^2 yields a stopping distance: Δx3=v(10.0)Δt3+12abrake(Δt3)2=(8.00 m/s)(5.0 s)+12(−1.60 m/s2)(5.0 s)2=40.0 m−20.0 m=20.0 m\Delta x_3 = v(10.0)\Delta t_3 + \frac{1}{2} a_{\text{brake}} (\Delta t_3)^2 = (8.00\text{ m/s})(5.0\text{ s}) + \frac{1}{2}(-1.60\text{ m/s}^2)(5.0\text{ s})^2 = 40.0\text{ m} - 20.0\text{ m} = 20.0\text{ m}

Common Pitfall: Always verify whether the vehicle comes to a complete halt (vf=0v_f = 0) or continues moving at the end of the braking interval. Applying a=ΔvΔta = \frac{\Delta v}{\Delta t} requires establishing the boundary velocity conditions from the graphical profile.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that the vehicle had already moved during the first 10.0 s and treats the given position of 90.0 m as the displacement during the braking phase alone, resulting in an incorrect positive acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(5.0)=0+1.60×5.0=8.0 m/s  ⟹  v(10.0)=8.0 m/sv(5.0) = 0 + 1.60 \times 5.0 = 8.0\text{ m/s} \implies v(10.0) = 8.0\text{ m/s}

  2. Step 2

    Δxbrake=90.0 m\Delta x_{\text{brake}} = 90.0\text{ m}

    Correct

    Δxbrake=x(15.0)−x(10.0)=90.0 m−60.0 m=30.0 m\Delta x_{\text{brake}} = x(15.0) - x(10.0) = 90.0\text{ m} - 60.0\text{ m} = 30.0\text{ m}

    You equated the vehicle's total position coordinate at t=15.0 st = 15.0\text{ s} (x=90.0 mx = 90.0\text{ m}) directly to the displacement during the braking interval, overlooking the 60.0 m60.0\text{ m} already covered during the first two intervals.

  3. Step 3

    90.0=8.0(5.0)+12abrake(5.0)2  ⟹  90.0=40.0+12.5abrake  ⟹  12.5abrake=50.0  ⟹  abrake=4.0 m/s290.0 = 8.0(5.0) + \frac{1}{2} a_{\text{brake}}(5.0)^2 \implies 90.0 = 40.0 + 12.5 a_{\text{brake}} \implies 12.5 a_{\text{brake}} = 50.0 \implies a_{\text{brake}} = 4.0\text{ m/s}^2

    Correct

    30.0=8.0(5.0)+12abrake(5.0)2  ⟹  12.5abrake=−10.0  ⟹  abrake=−0.80 m/s230.0 = 8.0(5.0) + \frac{1}{2} a_{\text{brake}}(5.0)^2 \implies 12.5 a_{\text{brake}} = -10.0 \implies a_{\text{brake}} = -0.80\text{ m/s}^2

    You solved the kinematic formula algebraically correctly, but the result was affected by using 90.0 m90.0\text{ m} instead of the interval displacement Δxbrake=30.0 m\Delta x_{\text{brake}} = 30.0\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly integrated the constant acceleration over the first interval to determine the speed.

You recognized that zero acceleration means constant velocity from t=5.0 st = 5.0\text{ s} to t=10.0 st = 10.0\text{ s}.

You selected the correct kinematic displacement formula Δx=viΔt+12a(Δt)2\Delta x = v_i \Delta t + \frac{1}{2} a (\Delta t)^2 for constant acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Position vs. Interval Displacement Confusion

You substituted the overall position coordinate x(15.0)=90.0 mx(15.0) = 90.0\text{ m} into an equation that requires the displacement Δx\Delta x over only the final 5.0 s5.0\text{ s} interval.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating total coordinate position x(t)x(t) interchangeably with interval displacement Δxinterval\Delta x_{\text{interval}} in piecewise motion problems.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Position from Interval Displacement
  • Displacement over interval ii is Δxi=x(tend)−x(tstart)\Delta x_i = x(t_{\text{end}}) - x(t_{\text{start}}), not the cumulative position x(tend)x(t_{\text{end}}).

  • Always sum previous displacements to find initial position x(tstart)x(t_{\text{start}}) before applying kinematic formulas to a sub-interval.

Sign Check for Braking
  • Braking or decelerating while moving in the positive direction must yield an acceleration opposite to velocity (a<0a < 0).

  • Check the sign of your calculated acceleration; a positive acceleration indicates speeding up, which contradicts braking.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the displacement in the first interval: Δx1=12(1.60 m/s2)(5.0 s)2=20.0 m\Delta x_1 = \frac{1}{2}(1.60\text{ m/s}^2)(5.0\text{ s})^2 = 20.0\text{ m}.

  2. Find the displacement in the second interval: Δx2=(8.00 m/s)(5.0 s)=40.0 m\Delta x_2 = (8.00\text{ m/s})(5.0\text{ s}) = 40.0\text{ m}.

  3. Compute the position at t=10.0 st = 10.0\text{ s}: x(10.0)=x(0)+Δx1+Δx2=0+20.0 m+40.0 m=60.0 mx(10.0) = x(0) + \Delta x_1 + \Delta x_2 = 0 + 20.0\text{ m} + 40.0\text{ m} = 60.0\text{ m}.

  4. Find the displacement during braking: Δx3=x(15.0)−x(10.0)=90.0 m−60.0 m=30.0 m\Delta x_3 = x(15.0) - x(10.0) = 90.0\text{ m} - 60.0\text{ m} = 30.0\text{ m}.

  5. Apply Δx3=v(10.0)Δt3+12abrake(Δt3)2\Delta x_3 = v(10.0)\Delta t_3 + \frac{1}{2}a_{\text{brake}}(\Delta t_3)^2: 30.0 m=(8.00 m/s)(5.0 s)+12abrake(5.0 s)230.0\text{ m} = (8.00\text{ m/s})(5.0\text{ s}) + \frac{1}{2}a_{\text{brake}}(5.0\text{ s})^2.

  6. Solve for abrakea_{\text{brake}}: 30.0=40.0+12.5abrake  ⟹  12.5abrake=−10.0  ⟹  abrake=−0.80 m/s230.0 = 40.0 + 12.5 a_{\text{brake}} \implies 12.5 a_{\text{brake}} = -10.0 \implies a_{\text{brake}} = -0.80\text{ m/s}^2.

Final answer

(a) v(10.0)=8.00 m/sv(10.0) = 8.00\text{ m/s}; (b) abrake=−0.80 m/s2a_{\text{brake}} = -0.80\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • In multi-stage motion, compute and list the initial position xix_i and initial velocity viv_i explicitly at each stage transition.

  • Always perform a physical sanity check on the sign of acceleration when braking.

OverviewACEpath Teacher's Diagnosis

02 The student assumes the vehicle must come to a complete stop at t = 15.0 s rather than using the given position constraint, calculating acceleration solely from an assumed final velocity of zero.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(5.0)=(1.60)(5.0)=8.0 m/s  ⟹  v(10.0)=8.0 m/sv(5.0) = (1.60)(5.0) = 8.0\text{ m/s} \implies v(10.0) = 8.0\text{ m/s}

  2. Step 2

    v(15.0)=0 m/sv(15.0) = 0\text{ m/s}

    Correct

    x(10.0)=20.0 m+40.0 m=60.0 m  ⟹  Δx3=90.0 m−60.0 m=30.0 mx(10.0) = 20.0\text{ m} + 40.0\text{ m} = 60.0\text{ m} \implies \Delta x_3 = 90.0\text{ m} - 60.0\text{ m} = 30.0\text{ m}

    You assumed that braking brings the vehicle to rest (v(15.0)=0 m/sv(15.0) = 0\text{ m/s}), but the problem only provides the position constraint x(15.0)=90.0 mx(15.0) = 90.0\text{ m}. Under an assumed final velocity of zero, the vehicle would have stopped at x=80.0 mx = 80.0\text{ m}.

  3. Step 3

    abrake=v(15.0)−v(10.0)Δt  ⟹  abrake=0−8.05.0=−1.6 m/s2a_{\text{brake}} = \frac{v(15.0) - v(10.0)}{\Delta t} \implies a_{\text{brake}} = \frac{0 - 8.0}{5.0} = -1.6\text{ m/s}^2

    Correct

    Δx3=v(10.0)Δt3+12abrake(Δt3)2  ⟹  30.0=(8.00)(5.0)+12.5abrake  ⟹  abrake=−0.80 m/s2\Delta x_3 = v(10.0)\Delta t_3 + \frac{1}{2}a_{\text{brake}}(\Delta t_3)^2 \implies 30.0 = (8.00)(5.0) + 12.5a_{\text{brake}} \implies a_{\text{brake}} = -0.80\text{ m/s}^2

    Because your calculation relied on the unsupported assumption v(15.0)=0 m/sv(15.0) = 0\text{ m/s}, your resulting acceleration contradicted the required final position of 90.0 m90.0\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the velocity at the end of the first constant-acceleration phase.

You recognized that zero acceleration means constant velocity during the second interval.

You correctly set up the acceleration definition formula Δv/Δt\Delta v / \Delta t for constant acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Assumed Zero Final Velocity

This is a conceptual trap rather than an arithmetic slip: you defaulted to vf=0v_f = 0 upon reading the word 'braking', rather than using the given position telemetry to determine the kinematics of the final interval.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Assuming that 'braking' or 'deceleration' necessarily means coming to a complete stop, rather than calculating the displacement across each stage and enforcing the given total position boundary condition.

REASONING PATH
Your ACEpath teacher’s suggested approach
Displacement Consistency Check
  • Total position is the sum of initial position and the displacements of all consecutive segments: x(t)=x(0)+∑Δxix(t) = x(0) + \sum \Delta x_i.

  • Calculate Δx\Delta x for each known phase and subtract from xfinalx_{\text{final}} to find the required displacement in the unknown phase before assuming any final velocity.

Boundary Condition Verification
  • Do not set vf=0v_f = 0 unless the problem explicitly states that the object 'comes to rest', 'stops', or 'halts'.

  • If a final position or displacement is given, solve for acceleration using Δx=v0Δt+12a(Δt)2\Delta x = v_0 \Delta t + \frac{1}{2}a(\Delta t)^2 instead of assuming vf=0v_f = 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the position at t=10.0 st = 10.0\text{ s}: Δx1=12(1.60 m/s2)(5.0 s)2=20.0 m\Delta x_1 = \frac{1}{2}(1.60\text{ m/s}^2)(5.0\text{ s})^2 = 20.0\text{ m}, and Δx2=(8.00 m/s)(5.0 s)=40.0 m\Delta x_2 = (8.00\text{ m/s})(5.0\text{ s}) = 40.0\text{ m}, giving x(10.0)=20.0 m+40.0 m=60.0 mx(10.0) = 20.0\text{ m} + 40.0\text{ m} = 60.0\text{ m}.

  2. Determine the required displacement during the braking interval: Δx3=x(15.0)−x(10.0)=90.0 m−60.0 m=30.0 m\Delta x_3 = x(15.0) - x(10.0) = 90.0\text{ m} - 60.0\text{ m} = 30.0\text{ m}.

  3. Use the kinematic equation Δx3=v(10.0)Δt3+12abrake(Δt3)2\Delta x_3 = v(10.0)\Delta t_3 + \frac{1}{2}a_{\text{brake}}(\Delta t_3)^2 with Δt3=5.0 s\Delta t_3 = 5.0\text{ s}: 30.0=(8.00)(5.0)+12abrake(5.0)230.0 = (8.00)(5.0) + \frac{1}{2}a_{\text{brake}}(5.0)^2.

  4. Simplify and solve for abrakea_{\text{brake}}: 30.0=40.0+12.5abrake  ⟹  12.5abrake=−10.0  ⟹  abrake=−0.80 m/s230.0 = 40.0 + 12.5a_{\text{brake}} \implies 12.5a_{\text{brake}} = -10.0 \implies a_{\text{brake}} = -0.80\text{ m/s}^2.

Final answer

(a) v(10.0)=8.00 m/sv(10.0) = 8.00\text{ m/s}; (b) abrake=−0.80 m/s2a_{\text{brake}} = -0.80\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice multi-segment kinematics problems where the final velocity must be derived from a position or distance constraint rather than assumed to be zero.

  • Always sketch a velocity-time (v–tv\text{–}t) graph to verify that the total area under the curve matches the specified total displacement.

OverviewACEpath Teacher's Diagnosis

03 The student omits the factor of 1/2 in the kinematic formula for displacement during the first interval, underestimating the position at t = 10.0 s and deriving an incorrect braking acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(5.0)=8.0 m/s  ⟹  v(10.0)=8.0 m/sv(5.0) = 8.0\text{ m/s} \implies v(10.0) = 8.0\text{ m/s}

  2. Step 2

    x(5.0)=a(Δt)2=(1.60)(5.0)2=40.0 mx(5.0) = a(\Delta t)^2 = (1.60)(5.0)^2 = 40.0\text{ m}

    Correct

    x(5.0)=12a(Δt)2=12(1.60 m/s2)(5.0 s)2=20.0 mx(5.0) = \frac{1}{2}a(\Delta t)^2 = \frac{1}{2}(1.60\text{ m/s}^2)(5.0\text{ s})^2 = 20.0\text{ m}

    You forgot the factor of 12\frac{1}{2} in the constant-acceleration displacement formula Δx=v0t+12at2\Delta x = v_0 t + \frac{1}{2}at^2, doubling the actual displacement during the first 5.0 s5.0\text{ s}.

  3. Step 3

    x(10.0)=40.0+(8.0)(5.0)=80.0 m  ⟹  Δx3=90.0−80.0=10.0 mx(10.0) = 40.0 + (8.0)(5.0) = 80.0\text{ m} \implies \Delta x_3 = 90.0 - 80.0 = 10.0\text{ m}

    Correct

    x(10.0)=20.0 m+(8.00 m/s)(5.0 s)=60.0 m  ⟹  Δx3=90.0 m−60.0 m=30.0 mx(10.0) = 20.0\text{ m} + (8.00\text{ m/s})(5.0\text{ s}) = 60.0\text{ m} \implies \Delta x_3 = 90.0\text{ m} - 60.0\text{ m} = 30.0\text{ m}

    Your method of adding the constant-velocity displacement (8.0 m/s)(5.0 s)=40.0 m(8.0\text{ m/s})(5.0\text{ s}) = 40.0\text{ m} and subtracting from the total distance 90.0 m90.0\text{ m} was correct, but the result was affected by the earlier calculation of x(5.0)x(5.0).

  4. Step 4

    10.0=(8.0)(5.0)+12abrake(5.0)2  ⟹  10.0=40.0+12.5abrake  ⟹  abrake=−2.4 m/s210.0 = (8.0)(5.0) + \frac{1}{2}a_{\text{brake}}(5.0)^2 \implies 10.0 = 40.0 + 12.5a_{\text{brake}} \implies a_{\text{brake}} = -2.4\text{ m/s}^2

    Correct

    30.0=(8.00)(5.0)+12abrake(5.0)2  ⟹  30.0=40.0+12.5abrake  ⟹  abrake=−0.800 m/s2 (or −1.60 m/s2 if stopping)30.0 = (8.00)(5.0) + \frac{1}{2}a_{\text{brake}}(5.0)^2 \implies 30.0 = 40.0 + 12.5a_{\text{brake}} \implies a_{\text{brake}} = -0.800\text{ m/s}^2 \text{ (or } -1.60\text{ m/s}^2 \text{ if stopping)}

    Your kinematic equation Δx3=v10Δt3+12abrake(Δt3)2\Delta x_3 = v_{10}\Delta t_3 + \frac{1}{2}a_{\text{brake}}(\Delta t_3)^2 was set up and solved correctly for your value of Δx3\Delta x_3, but it inherited the error from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly evaluated the velocity v(10.0)=8.0 m/sv(10.0) = 8.0\text{ m/s} from the acceleration graph.

You correctly identified that displacement equals velocity times time during the zero-acceleration cruising phase.

You correctly structured the displacement equation Δx=v0t+12at2\Delta x = v_0 t + \frac{1}{2}at^2 to solve for acceleration in the final braking interval.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of 1/2 factor in kinematic displacement

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated displacement under constant acceleration with an expression missing the triangular averaging factor 12\frac{1}{2}, writing Δx=at2\Delta x = at^2 instead of Δx=12at2\Delta x = \frac{1}{2}at^2 (the area of a triangle on a v–tv\text{--}t graph).

REASONING PATH
Your ACEpath teacher’s suggested approach
Area Under a Linear Velocity-Time Graph
  • Displacement starting from rest with constant acceleration is the area of a triangle: Δx=12(base)(height)=12(t)(at)=12at2\Delta x = \frac{1}{2}(\text{base})(\text{height}) = \frac{1}{2}(t)(at) = \frac{1}{2}at^2.

  • Always verify that your formula includes 12\frac{1}{2} whenever velocity changes linearly from rest.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. x(5.0)=12(1.60 m/s2)(5.0 s)2=20.0 mx(5.0) = \frac{1}{2}(1.60\text{ m/s}^2)(5.0\text{ s})^2 = 20.0\text{ m}

  2. x(10.0)=20.0 m+(8.00 m/s)(5.0 s)=60.0 mx(10.0) = 20.0\text{ m} + (8.00\text{ m/s})(5.0\text{ s}) = 60.0\text{ m}

  3. Δx3=x(15.0)−x(10.0)=90.0 m−60.0 m=30.0 m\Delta x_3 = x(15.0) - x(10.0) = 90.0\text{ m} - 60.0\text{ m} = 30.0\text{ m}

  4. 30.0 m=(8.00 m/s)(5.0 s)+12abrake(5.0 s)230.0\text{ m} = (8.00\text{ m/s})(5.0\text{ s}) + \frac{1}{2}a_{\text{brake}}(5.0\text{ s})^2

  5. 30.0=40.0+12.5abrake  ⟹  12.5abrake=−10.0  ⟹  abrake=−0.80 m/s230.0 = 40.0 + 12.5a_{\text{brake}} \implies 12.5a_{\text{brake}} = -10.0 \implies a_{\text{brake}} = -0.80\text{ m/s}^2 (Note: if the vehicle comes fully to rest at 15.0 s15.0\text{ s}, abrake=0−8.005.0=−1.60 m/s2a_{\text{brake}} = \frac{0 - 8.00}{5.0} = -1.60\text{ m/s}^2)

Final answer

(a) v(10.0)=8.00 m/sv(10.0) = 8.00\text{ m/s}; (b) abrake=−1.60 m/s2a_{\text{brake}} = -1.60\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric derivation of Δx=12at2\Delta x = \frac{1}{2}at^2 as the area of a triangle under the v–tv\text{--}t curve to make the factor of 12\frac{1}{2} intuitive.

  • Practice setting up kinematic problems by sketching a quick v–tv\text{--}t graph and partitioning it into distinct geometric shapes (rectangles and triangles).

Lock it in

Similar question

01

A drone starts from rest at x=0 mx = 0\text{ m} and accelerates at +2.0 m/s2+2.0\text{ m/s}^2 for 4.0 s4.0\text{ s}, then coasts at constant velocity for 3.0 s3.0\text{ s}. Find its position xx at t=7.0 st = 7.0\text{ s}.

Answer

At t=4.0 st = 4.0\text{ s}, v=0+2.0(4.0)=8.0 m/sv = 0 + 2.0(4.0) = 8.0\text{ m/s} and Δx1=12(2.0)(4.0)2=16.0 m\Delta x_1 = \frac{1}{2}(2.0)(4.0)^2 = 16.0\text{ m}. From t=4.0t = 4.0 to 7.0 s7.0\text{ s}, Δx2=(8.0)(3.0)=24.0 m\Delta x_2 = (8.0)(3.0) = 24.0\text{ m}. Total position x(7.0)=16.0+24.0=40.0 mx(7.0) = 16.0 + 24.0 = 40.0\text{ m}.

02

A cart begins at x=10.0 mx = 10.0\text{ m} with velocity v=+6.0 m/sv = +6.0\text{ m/s}. It travels at constant velocity for 5.0 s5.0\text{ s}, then brakes with constant acceleration aa for another 5.0 s5.0\text{ s}, coming to rest at final position x=55.0 mx = 55.0\text{ m}. Determine the braking acceleration aa.

Answer

Position after constant velocity: x(5.0)=10.0+(6.0)(5.0)=40.0 mx(5.0) = 10.0 + (6.0)(5.0) = 40.0\text{ m}. Displacement during braking: Δxbrake=55.0−40.0=15.0 m\Delta x_{\text{brake}} = 55.0 - 40.0 = 15.0\text{ m}. Using Δx=viΔt+12a(Δt)2\Delta x = v_i \Delta t + \frac{1}{2}a(\Delta t)^2: 15.0=(6.0)(5.0)+12a(5.0)2  ⟹  15.0=30.0+12.5a  ⟹  a=−1.2 m/s215.0 = (6.0)(5.0) + \frac{1}{2}a(5.0)^2 \implies 15.0 = 30.0 + 12.5a \implies a = -1.2\text{ m/s}^2.

03

A train starts from rest at the origin. It accelerates uniformly for 10.0 s10.0\text{ s} to reach 20.0 m/s20.0\text{ m/s}, cruises at this speed for 20.0 s20.0\text{ s}, and finally brakes with constant deceleration to stop at x=650.0 mx = 650.0\text{ m}. What is the duration of the braking interval Δtbrake\Delta t_{\text{brake}}?

Answer

Phase 1: Δx1=12(20.0)(10.0)=100.0 m\Delta x_1 = \frac{1}{2}(20.0)(10.0) = 100.0\text{ m}. Phase 2: Δx2=(20.0)(20.0)=400.0 m\Delta x_2 = (20.0)(20.0) = 400.0\text{ m}. Position before braking: x=500.0 mx = 500.0\text{ m}. Braking displacement: Δx3=650.0−500.0=150.0 m\Delta x_3 = 650.0 - 500.0 = 150.0\text{ m}. With vf=0v_f = 0, Δx3=vi+vf2Δt3  ⟹  150.0=20.0+02Δt3  ⟹  Δtbrake=15.0 s\Delta x_3 = \frac{v_i + v_f}{2}\Delta t_3 \implies 150.0 = \frac{20.0 + 0}{2}\Delta t_3 \implies \Delta t_{\text{brake}} = 15.0\text{ s}.

Loading workspace…