Resources
An optical inspection microscope uses an objective lens calibrated with an optical power of (). A miniature microchip component with a width of is placed along the principal axis at an object distance of from the optical center of the lens. Convert all optical quantities to standard SI units (meters) and calculate: (a) the focal length of the lens in centimeters, (b) the image distance in centimeters, and (c) the physical width of the projected image in millimeters.
Answer and steps
Final answer
(a) ; (b) ; (c) (inverted).
Steps
Part (a): Focal Length of the Lens
The relationship between the optical power of a lens and its focal length in meters is given by:
Substitute the given value :
Converting meters to centimeters ():
Part (b): Image Distance
First, express the object distance in centimeters:
Using the thin lens equation:
Rearrange the equation to solve for the image distance :
Substitute and :
Taking the reciprocal:
The positive sign indicates that a real image is formed on the opposite side of the lens from the object.
Part (c): Physical Width of the Projected Image
The linear lateral magnification produced by a thin lens is given by:
Substitute and :
The negative sign signifies that the image is inverted. The absolute magnitude of the magnification is:
Given the object width , the width of the projected image is:
(Note: Always ensure all distances are converted into a consistent set of units before applying the thin lens equation to avoid unit mismatch errors.)
Typical errors
01 The student misremembers the thin lens equation by adding the reciprocal terms instead of subtracting to isolate 1/d_i, resulting in an incorrect image distance of 4.44 cm and image width of 0.2 mm.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The thin lens equation is . Rearranging to solve for the image term requires subtracting from , giving rather than adding them.
- Step 3Correct
Your magnification formula and unit conversions for object width were mathematically sound, but your numerical result was affected by the incorrect value of from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the definition of optical power to calculate the lens focal length.
You accurately converted all given dimensions into compatible units.
You correctly applied the definition of lateral magnification to compute the image width.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally added the reciprocal terms instead of subtracting when isolating .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisMisidentifying the subject of the thin lens equation: starting from the standard form , isolating an unknown term on the right requires subtracting the other term from the focal reciprocal.
REASONING PATH
Your ACEpath teacher’s suggested approach- Thin Lens Equation Isolation
Always write down the fundamental equation first, then isolate the target term algebraically before plugging in numbers.
- Sanity Check for Real Images
When an object is placed beyond the focal point () of a converging lens, the image is real, inverted, and located at .
Check whether your calculated image distance exceeds the focal length; since , must be greater than .
CORRECTED PATH
ACEpath Teacher's DemonstrationRewrite the thin lens equation correctly: .
Substitute the known values: .
Take the reciprocal to find .
Compute lateral magnification: .
Multiply magnification by object width: .
(a) ; (b) ; (c)
02 The student uses the focal length formula f = 1/P but forgets that diopters are in inverse meters, directly treating 1/12.5 as centimeters to obtain f = 0.08 cm.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Optical power in diopters is defined in inverse meters (). Taking the reciprocal gives the focal length in meters (), which equals , not .
- Step 2
- Step 3Correct
Your algebraic rearrangement and substitution into the thin lens equation were mathematically sound, but the result is affected by using the incorrect focal length .
- Step 4Correct
You correctly converted the microchip width to millimeters and applied , but the computed magnification was distorted by the incorrect image distance.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled and rearranged the thin lens equation .
You correctly used the lateral magnification definition to find the projected image width.
You correctly converted to and to .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou evaluated as and attached the unit centimeters directly without first writing it in SI meters.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the base SI unit of lens power (diopter, where ) with an arbitrary length unit such as centimeters. Whenever you use , the resulting focal length is strictly in meters.
REASONING PATH
Your ACEpath teacher’s suggested approach- Optical Power Definition
, so .
Always write the unit meters explicitly after dividing , then multiply by to convert to centimeters.
- Consistent Units in Lens Equation
Every term in must share the same linear dimension unit.
Standardize , , and to either all meters or all centimeters before performing reciprocals.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate in meters: .
Convert to centimeters: .
Substitute into the thin lens formula: .
Invert to find : .
Determine magnification: .
Compute projected width: .
(a) ; (b) ; (c)
03 The student inverts the magnification formula as |m| = d_o / d_i instead of d_i / d_o, arriving at a fractional image width of 0.1125 mm.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You inverted the lateral magnification ratio. Lateral magnification is defined as the ratio of image distance to object distance, , not .
- Step 4Correct
Your conversion of to millimeters was correct, but this final width was affected by the inverted magnification factor calculated in the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the focal length from optical power using .
You converted all given lengths into consistent units before applying the thin lens equation.
You correctly solved the thin lens equation to find the image distance .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally placed the object distance in the numerator and the image distance in the denominator when calculating magnification.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the direction of the ratio in the lateral magnification formula . A helpful visual reminder is similar triangles formed by the chief ray: , so 'image' always stays on top.
REASONING PATH
Your ACEpath teacher’s suggested approach- Magnification Ratio Definition
Always put the image term ( or ) in the numerator and the object term ( or ) in the denominator.
- Physical Reasonableness Check
When , the image is further away from the lens than the object, so it must be magnified ().
Check whether the image is farther or closer than the object: since , the image must be larger than the object.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the standard lateral magnification definition: .
Multiply the magnification by the object width: .
(a) ; (b) ; (c)
Lock it in
What is the correct rearrangement of the thin lens equation to solve for ?
. Subtract the object reciprocal from the focal reciprocal.
Similar question
A converging lens has a focal length of . An illuminated object is placed at from the lens. Calculate the image distance in centimeters.
Answer
. Key steps: .
An optical sensor lens has an optical power of . An LED of height is placed from the lens. Find the image distance and the projected image height .
Answer
, . Key steps: . Thin lens formula: . Magnification: . Image height: .
A projector lens with projects a slide onto a screen located at . Determine the required slide distance and state whether the image is enlarged or reduced.
Answer
; enlarged (). Key steps: . Magnification , so the image is enlarged.