Resources

A research elevator descends inside a vertical mine shaft along a coordinate axis oriented such that the upward vertical direction is defined as positive (+y+y). The height of the elevator above the shaft floor is given by y(t)=150.0−4.9t2−2.0ty(t) = 150.0 - 4.9t^2 - 2.0t, where yy is in meters (m\text{m}) and tt is in seconds (s\text{s}). (a) Calculate the elevator's instantaneous velocity at t=4.0 st = 4.0\text{ s} obeying the passive vertical coordinate convention. (b) State whether the elevator is speeding up or slowing down at this instant, providing mathematical justification based on the signs of velocity and acceleration.

Answer and steps

Final answer

(a) vy(4.0)=−41.2 m/sv_y(4.0) = -41.2\text{ m/s}; (b) Speeding up, because both instantaneous velocity (vy=−41.2 m/sv_y = -41.2\text{ m/s}) and instantaneous acceleration (ay=−9.8 m/s2a_y = -9.8\text{ m/s}^2) have identical negative signs.

Steps

Part (a): Determine the Instantaneous Velocity

Instantaneous velocity vy(t)v_y(t) is defined as the first time-derivative of the position function y(t)y(t):

vy(t)=dydtv_y(t) = \frac{dy}{dt}

Given the position function: y(t)=150.0−4.9t2−2.0ty(t) = 150.0 - 4.9t^2 - 2.0t

Differentiating term by term with respect to time tt: vy(t)=ddt(150.0)−4.9⋅ddt(t2)−2.0⋅ddt(t)v_y(t) = \frac{d}{dt}(150.0) - 4.9 \cdot \frac{d}{dt}(t^2) - 2.0 \cdot \frac{d}{dt}(t) vy(t)=0−4.9(2t)−2.0(1)=−9.8t−2.0v_y(t) = 0 - 4.9(2t) - 2.0(1) = -9.8t - 2.0

Substitute t=4.0 st = 4.0\text{ s} into the velocity equation: vy(4.0)=−9.8(4.0)−2.0=−39.2−2.0=−41.2 m/sv_y(4.0) = -9.8(4.0) - 2.0 = -39.2 - 2.0 = -41.2\text{ m/s}

The negative sign indicates that at t=4.0 st = 4.0\text{ s}, the elevator is moving downward along the negative vertical axis.


Part (b): Determine Whether the Elevator is Speeding Up or Slowing Down

To determine if an object is speeding up or slowing down, compare the direction (sign) of its instantaneous velocity with that of its instantaneous acceleration.

  1. Find the instantaneous acceleration ay(t)a_y(t): Acceleration is the derivative of velocity with respect to time: ay(t)=dvydt=ddt(−9.8t−2.0)=−9.8 m/s2a_y(t) = \frac{dv_y}{dt} = \frac{d}{dt}(-9.8t - 2.0) = -9.8\text{ m/s}^2

    Since ay(t)a_y(t) is constant, at t=4.0 st = 4.0\text{ s}: ay(4.0)=−9.8 m/s2a_y(4.0) = -9.8\text{ m/s}^2

  2. Analyze the signs:

    • Instantaneous velocity: vy(4.0)=−41.2 m/sv_y(4.0) = -41.2\text{ m/s} (<0< 0, downward)
    • Instantaneous acceleration: ay(4.0)=−9.8 m/s2a_y(4.0) = -9.8\text{ m/s}^2 (<0< 0, downward)

Because both velocity and acceleration share the same negative sign, the acceleration vector points in the same direction as the motion. Consequently, the magnitude of velocity (speed) is increasing, so the elevator is speeding up.

Common Pitfall: A negative acceleration does not automatically mean an object is slowing down. "Slowing down" occurs only when velocity and acceleration have opposite signs. When both are negative, the object is accelerating in the negative direction, causing its speed to increase.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses negative acceleration with slowing down, ignoring that velocity is also negative.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(t)=dydt=−9.8t−2.0  ⟹  v(4.0)=−9.8(4.0)−2.0=−41.2 m/sv(t) = \frac{dy}{dt} = -9.8t - 2.0 \implies v(4.0) = -9.8(4.0) - 2.0 = -41.2\text{ m/s}

  2. Step 2

    a(t)=dvdt=−9.8 m/s2  ⟹  v(4.0)=−41.2 m/s and a(4.0)=−9.8 m/s2a(t) = \frac{dv}{dt} = -9.8\text{ m/s}^2 \implies v(4.0) = -41.2\text{ m/s}\text{ and } a(4.0) = -9.8\text{ m/s}^2

  3. Step 3

    Because acceleration is negative, the elevator is slowing down.

    Correct

    Because both vy(4.0)=−41.2 m/sv_y(4.0) = -41.2\text{ m/s} and ay(4.0)=−9.8 m/s2a_y(4.0) = -9.8\text{ m/s}^2 have the same negative sign, the elevator is speeding up.

    Negative acceleration does not necessarily mean slowing down. An object speeds up whenever its velocity and acceleration point in the same direction (share the same algebraic sign).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly differentiated the position function y(t)y(t) to find the instantaneous velocity v(t)v(t).

You evaluated v(4.0)v(4.0) accurately with the correct negative sign and units.

You successfully determined the acceleration function by differentiating velocity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign of acceleration misinterpreted as deceleration

No, this is a conceptual misconception regarding the definition of speeding up versus negative acceleration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated a negative sign in acceleration as synonymous with 'deceleration' or slowing down, without comparing its sign to the sign of velocity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Condition for Speeding Up vs. Slowing Down
  • An object speeds up when vv and aa have the same sign (v⋅a>0v \cdot a > 0). An object slows down when vv and aa have opposite signs (v⋅a<0v \cdot a < 0).

  • Always compare the sign of v(t)v(t) and a(t)a(t) together rather than inspecting a(t)a(t) in isolation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the signs of both kinematic quantities: vy(4.0)=−41.2 m/s<0v_y(4.0) = -41.2\text{ m/s} < 0 and ay(4.0)=−9.8 m/s2<0a_y(4.0) = -9.8\text{ m/s}^2 < 0.

  2. Determine the relative alignment: because both signs are negative, the acceleration vector points in the same direction as the velocity vector.

  3. Conclude that the magnitude of velocity (speed) is increasing.

Final answer

The elevator is speeding up.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between speed ∣v∣|v| and directional velocity vv.

  • Practice checking the product v(t)⋅a(t)v(t) \cdot a(t) whenever asked if an object is speeding up or slowing down.

OverviewACEpath Teacher's Diagnosis

02 The student calculates average velocity over [0, 4.0] s instead of taking the derivative for instantaneous velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    y(0)=150.0 m  ⟹  y(4.0)=150.0−4.9(4.0)2−2.0(4.0)=63.6 m  ⟹  v=y(4.0)−y(0)4.0−0=63.6−150.04.0=−21.6 m/sy(0) = 150.0\text{ m} \implies y(4.0) = 150.0 - 4.9(4.0)^2 - 2.0(4.0) = 63.6\text{ m} \implies v = \frac{y(4.0) - y(0)}{4.0 - 0} = \frac{63.6 - 150.0}{4.0} = -21.6\text{ m/s}

    Correct

    vy(t)=dydt=−9.8t−2.0  ⟹  vy(4.0)=−9.8(4.0)−2.0=−41.2 m/sv_y(t) = \frac{dy}{dt} = -9.8t - 2.0 \implies v_y(4.0) = -9.8(4.0) - 2.0 = -41.2\text{ m/s}

    You calculated the average velocity vˉ=ΔyΔt\bar{v} = \frac{\Delta y}{\Delta t} over the interval [0,4.0] s[0, 4.0]\text{ s}. Instantaneous velocity at a single moment tt requires taking the derivative of position with respect to time, vy(t)=dydtv_y(t) = \frac{dy}{dt}.

  2. Step 2

    a=dvdt=−9.8 m/s2a = \frac{dv}{dt} = -9.8\text{ m/s}^2

  3. Step 3

    v=−21.6 m/s and a=−9.8 m/s2  ⟹  Since velocity and acceleration have the same sign, the elevator is speeding up.v = -21.6\text{ m/s}\text{ and }a = -9.8\text{ m/s}^2 \implies \text{Since velocity and acceleration have the same sign, the elevator is speeding up.}

    Correct

    vy(4.0)=−41.2 m/s<0 and ay(4.0)=−9.8 m/s2<0  ⟹  Because both are negative (same sign), the elevator is speeding up.v_y(4.0) = -41.2\text{ m/s} < 0\text{ and }a_y(4.0) = -9.8\text{ m/s}^2 < 0 \implies \text{Because both are negative (same sign), the elevator is speeding up.}

    Your physical reasoning is completely sound: when velocity and acceleration share the same algebraic sign, the object speeds up. While your conclusion is correct, it relied on the downstream numerical velocity from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You evaluated position values accurately from the quadratic equation.

You identified the correct acceleration magnitude and direction as −9.8 m/s2-9.8\text{ m/s}^2.

You correctly applied the physics principle that matching signs for velocity and acceleration mean the object is speeding up.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Average vs. Instantaneous Velocity Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated average velocity over a time interval ΔyΔt\frac{\Delta y}{\Delta t} with instantaneous velocity at a specific point in time dydt\frac{dy}{dt}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Instantaneous vs. Average Velocity
  • Average velocity over [t1,t2][t_1, t_2] is vˉ=y(t2)−y(t1)t2−t1\bar{v} = \frac{y(t_2) - y(t_1)}{t_2 - t_1}, whereas instantaneous velocity at instant tt is the limit/derivative v(t)=lim⁡Δt→0ΔyΔt=dydtv(t) = \lim_{\Delta t \to 0} \frac{\Delta y}{\Delta t} = \frac{dy}{dt}.

  • Whenever a problem asks for velocity 'at' a specific time t=t0t = t_0, differentiate the position function with respect to tt before substituting the time value.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the first time-derivative of position: vy(t)=ddt(150.0−4.9t2−2.0t)=−9.8t−2.0v_y(t) = \frac{d}{dt}(150.0 - 4.9t^2 - 2.0t) = -9.8t - 2.0.

  2. Substitute t=4.0 st = 4.0\text{ s}: vy(4.0)=−9.8(4.0)−2.0=−39.2−2.0=−41.2 m/sv_y(4.0) = -9.8(4.0) - 2.0 = -39.2 - 2.0 = -41.2\text{ m/s}.

  3. Evaluate acceleration: ay(t)=dvydt=−9.8 m/s2a_y(t) = \frac{dv_y}{dt} = -9.8\text{ m/s}^2.

  4. Compare signs: since both vy(4.0)=−41.2 m/s<0v_y(4.0) = -41.2\text{ m/s} < 0 and ay(4.0)=−9.8 m/s2<0a_y(4.0) = -9.8\text{ m/s}^2 < 0 share the same negative sign, the elevator is speeding up downward.

Final answer

(a) vy(4.0)=−41.2 m/sv_y(4.0) = -41.2\text{ m/s}; (b) Speeding up, because both instantaneous velocity (vy=−41.2 m/sv_y = -41.2\text{ m/s}) and acceleration (ay=−9.8 m/s2a_y = -9.8\text{ m/s}^2) are negative.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review calculus-based kinematic definitions: v(t)=y′(t)v(t) = y'(t) and a(t)=v′(t)=y′′(t)a(t) = v'(t) = y''(t).

  • Practice distinguishing prompt keywords: 'average velocity between t1t_1 and t2t_2' uses difference quotients, while 'instantaneous velocity at tt' uses derivatives.

OverviewACEpath Teacher's Diagnosis

03 The student omits the negative sign on the derivative terms and treats downward motion as positive velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(t)=dydt=9.8t+2.0  ⟹  v(4.0)=9.8(4.0)+2.0=41.2 m/sv(t) = \frac{dy}{dt} = 9.8t + 2.0 \implies v(4.0) = 9.8(4.0) + 2.0 = 41.2\text{ m/s}

    Correct

    v(t)=dydt=−9.8t−2.0  ⟹  v(4.0)=−9.8(4.0)−2.0=−41.2 m/sv(t) = \frac{dy}{dt} = -9.8t - 2.0 \implies v(4.0) = -9.8(4.0) - 2.0 = -41.2\text{ m/s}

    When differentiating y(t)=150.0−4.9t2−2.0ty(t) = 150.0 - 4.9t^2 - 2.0t, you must preserve the negative signs in front of the coefficients: ddt(−4.9t2)=−9.8t\frac{d}{dt}(-4.9t^2) = -9.8t and ddt(−2.0t)=−2.0\frac{d}{dt}(-2.0t) = -2.0.

  2. Step 2

    a(t)=dvdt=9.8 m/s2  ⟹  v(4.0)=41.2 m/s and a(4.0)=9.8 m/s2  ⟹  Since both velocity and acceleration are positive, the elevator is speeding up.a(t) = \frac{dv}{dt} = 9.8\text{ m/s}^2 \implies v(4.0) = 41.2\text{ m/s}\text{ and }a(4.0) = 9.8\text{ m/s}^2 \implies \text{Since both velocity and acceleration are positive, the elevator is speeding up.}

    Correct

    a(t)=dvdt=−9.8 m/s2  ⟹  v(4.0)=−41.2 m/s and a(4.0)=−9.8 m/s2  ⟹  Since both are negative, their signs match, so the elevator is speeding up.a(t) = \frac{dv}{dt} = -9.8\text{ m/s}^2 \implies v(4.0) = -41.2\text{ m/s}\text{ and }a(4.0) = -9.8\text{ m/s}^2 \implies \text{Since both are negative, their signs match, so the elevator is speeding up.}

    Your reasoning that matching signs mean speeding up is completely sound. However, because of the sign error in Step 1, your values for both v(4.0)v(4.0) and a(4.0)a(4.0) became +41.2 m/s+41.2\text{ m/s} and +9.8 m/s2+9.8\text{ m/s}^2 instead of −41.2 m/s-41.2\text{ m/s} and −9.8 m/s2-9.8\text{ m/s}^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that instantaneous velocity is the first time derivative of position, v(t)=dydtv(t) = \frac{dy}{dt}.

You correctly identified that acceleration is the derivative of velocity, a(t)=dvdta(t) = \frac{dv}{dt}.

You correctly applied the physical principle that an object speeds up when velocity and acceleration share the same sign.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Differentiation

Dropping the leading negative signs from the quadratic and linear terms during term-by-term differentiation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the terms as positive quantities or overlooked the negative signs attached to the coefficients of the position function y(t)=150.0−4.9t2−2.0ty(t) = 150.0 - 4.9t^2 - 2.0t. In one-dimensional kinematics, signs directly represent physical directions along the defined coordinate axis (here, negative means downward).

REASONING PATH
Your ACEpath teacher’s suggested approach
Preserve Coefficient Signs
  • For any term −ctn-ct^n, the derivative with respect to tt is −c⋅ntn−1-c \cdot n t^{n-1}.

  • Copy each term's operational sign along with its coefficient before executing the power rule.

Physical Reality Check
  • An elevator descending along a +y+y upward coordinate axis must have a negative vertical velocity.

  • Check whether the sign of your resulting velocity matches the physical description in the problem statement.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate y(t)=150.0−4.9t2−2.0ty(t) = 150.0 - 4.9t^2 - 2.0t preserving signs: vy(t)=ddt(150.0)−4.9(2t)−2.0(1)=−9.8t−2.0v_y(t) = \frac{d}{dt}(150.0) - 4.9(2t) - 2.0(1) = -9.8t - 2.0.

  2. Substitute t=4.0 st = 4.0\text{ s}: vy(4.0)=−9.8(4.0)−2.0=−41.2 m/sv_y(4.0) = -9.8(4.0) - 2.0 = -41.2\text{ m/s}.

  3. Differentiate velocity to find acceleration: ay(t)=ddt(−9.8t−2.0)=−9.8 m/s2a_y(t) = \frac{d}{dt}(-9.8t - 2.0) = -9.8\text{ m/s}^2.

  4. Compare signs: since both vy(4.0)<0v_y(4.0) < 0 and ay(4.0)<0a_y(4.0) < 0, their signs are identical, confirming the elevator is speeding up.

Final answer

(a) vy(4.0)=−41.2 m/sv_y(4.0) = -41.2\text{ m/s}; (b) Speeding up, because velocity and acceleration both point downward (both are negative).

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice tracking negative signs carefully when taking algebraic derivatives of polynomials with mixed signs.

  • Always perform a physical sanity check: if an object moves in the negative coordinate direction, its velocity component must be negative.

Lock it in

Similar question

01

A particle moves along the xx-axis with position x(t)=20−3t2x(t) = 20 - 3t^2. Determine whether the particle is speeding up or slowing down at t=2 st = 2\text{ s}, justifying your answer using velocity and acceleration.

Answer

Speeding up. First, v(t)=dxdt=−6tv(t) = \frac{dx}{dt} = -6t, so v(2)=−12 m/sv(2) = -12\text{ m/s}. Next, a(t)=dvdt=−6 m/s2a(t) = \frac{dv}{dt} = -6\text{ m/s}^2. Because both v(2)v(2) and a(2)a(2) are negative, they point in the same direction, so the particle is speeding up.

02

A drone's vertical height is given by y(t)=4t3−18t2+24ty(t) = 4t^3 - 18t^2 + 24t. At t=2.5 st = 2.5\text{ s}, calculate its instantaneous velocity and acceleration, and state whether its speed is increasing or decreasing.

Answer

Speed is increasing. Velocity is v(t)=12t2−36t+24v(t) = 12t^2 - 36t + 24, giving v(2.5)=12(6.25)−36(2.5)+24=75−90+24=+9 m/sv(2.5) = 12(6.25) - 36(2.5) + 24 = 75 - 90 + 24 = +9\text{ m/s}. Acceleration is a(t)=24t−36a(t) = 24t - 36, giving a(2.5)=24(2.5)−36=60−36=+24 m/s2a(2.5) = 24(2.5) - 36 = 60 - 36 = +24\text{ m/s}^2. Since both v(2.5)>0v(2.5) > 0 and a(2.5)>0a(2.5) > 0, the drone's speed is increasing.

03

A toy car travels along a line with velocity v(t)=t2−8t+7 m/sv(t) = t^2 - 8t + 7\text{ m/s}. For what time interval during 0≤t≤60 \le t \le 6 is the car moving in the positive direction but slowing down?

Answer

0≤t<1 s0 \le t < 1\text{ s}. The car moves in the positive direction when v(t)>0v(t) > 0, which factors as (t−1)(t−7)>0(t - 1)(t - 7) > 0, giving 0≤t<10 \le t < 1. Acceleration is a(t)=2t−8=2(t−4)a(t) = 2t - 8 = 2(t - 4), which is negative for t<4t < 4. In the interval 0≤t<10 \le t < 1, v(t)>0v(t) > 0 and a(t)<0a(t) < 0, so the car has positive velocity but is slowing down.

Loading workspace…