Resources
An irregularly shaped geological sample is suspended from a light thread attached to a spring scale. In air, the scale reads a weight of . When the sample is completely immersed in an unknown fluid, the scale reading drops to an apparent weight of . An independent pycnometer test establishes that the volume of the sample is . Taking , use Archimedes' principle to solve backwards for the mass density of the unknown fluid .
Answer and steps
Final answer
Steps
Relate apparent weight to the buoyant force
When the geological sample is weighed in air, the spring scale measures its actual gravitational weight (neglecting the minuscule buoyant force of air):
When completely submerged in the fluid, the fluid exerts an upward buoyant force on the sample. The scale reading, known as the apparent weight , represents the upward tension force required to keep the submerged object in equilibrium:
Rearranging this gives the magnitude of the buoyant force:
Apply Archimedes' principle
According to Archimedes' principle, the buoyant force equals the weight of the fluid displaced by the object:
where:
- is the mass density of the unknown fluid,
- is the volume of fluid displaced,
- is the acceleration due to gravity.
Since the sample is completely submerged, the volume of displaced fluid is identical to the total volume of the sample:
Thus:
Solve for the fluid density
Rearranging the expression to isolate :
Substitute the known values into the equation:
Calculate the denominator:
Now compute :
Rounding to three significant figures gives:
(A common pitfall is using the sample's density instead of the fluid's density in Archimedes' formula, or forgetting that the buoyant force corresponds directly to the difference between the scale readings: .)
Typical errors
01 The student confuses the buoyant force with the apparent weight measured while submerged rather than the difference between the weight in air and the apparent weight, resulting in an inflated fluid density.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The apparent weight is the tension measured by the spring scale while submerged, not the upward buoyant force itself. In static equilibrium, , so the buoyant force equals the scale reading decrease: .
- Step 2
- Step 3Correct
Your algebraic manipulation and arithmetic were executed properly, but the numerical answer is inflated due to using from Step 1 instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified and applied Archimedes' principle formula .
You rearranged the formula and evaluated the arithmetic accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the apparent weight measured on the spring scale as the buoyant force itself, overlooking that the scale reading represents the remaining downward tension force after buoyancy provides partial support.
REASONING PATH
Your ACEpath teacher’s suggested approach- Equilibrium of a Submerged Object
For a submerged object hanging from a scale, , so the scale reading (tension) is .
Always find buoyant force from a scale reading by taking the difference between the weight in air and the submerged weight: .
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the buoyant force from the change in scale reading: .
Substitute into Archimedes' principle: .
Evaluate the quotient: .
02 The student calculates the buoyant force correctly but forgets to divide by the gravitational acceleration g when applying Archimedes' principle, confusing weight with mass and yielding a density off by a factor of g.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Archimedes' principle states that buoyant force equals the weight of the displaced fluid (), not merely the displaced mass (). You need to include the acceleration due to gravity .
- Step 3Correct
Because was missing from your formula in the previous step, your numerical evaluation yielded a density that is approximately times too large.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the buoyant force as the difference between the weight in air and the apparent weight in the fluid.
You correctly recognized that the volume of the displaced fluid equals the sample's total volume.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou omitted the gravitational acceleration when expressing buoyant force in terms of fluid density and volume.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou equated buoyant force (a force measured in newtons) to the displaced mass (measured in kilograms) rather than the displaced fluid's weight . A quick dimensional check () helps prevent dropping .
REASONING PATH
Your ACEpath teacher’s suggested approach- Force vs. Mass Distinction
Buoyant force is a force (), so it equals displaced mass multiplied by : .
Always verify units: check whether the left-hand side is a force () or a mass () before setting up the equation.
CORRECTED PATH
ACEpath Teacher's DemonstrationState the full Archimedes' principle relation for weight of displaced fluid: .
Rearrange for the fluid density: .
Substitute the known values: .
Round to three significant figures: (or ).
03 The student adds the apparent weight to the weight in air instead of subtracting it to find the buoyant force, resulting in an overestimate of the buoyant force and fluid density.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The buoyant force acts upward to lighten the sample, so the scale reading decreases by the magnitude of the buoyant force: . Rearranging gives , not their sum.
- Step 2
- Step 3Correct
Your algebraic rearrangement and arithmetic execution were carried out properly, but substituting the incorrect buoyant force from Step 1 led to an overestimate of the fluid density.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled Archimedes' principle relating buoyant force to displaced fluid density, volume, and gravity.
You correctly rearranged the formula to isolate the fluid density .
You carried out the numerical calculation accurately using your value for .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of subtracting the immersed scale reading from the weight in air.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating apparent weight with an additive component of the force balance rather than recognizing that upward buoyancy directly offsets downward gravity to reduce the required upward spring tension.
REASONING PATH
Your ACEpath teacher’s suggested approach- Submerged Free-Body Diagram
In static equilibrium for a suspended submerged object, the upward forces (spring tension and buoyant force ) balance the downward gravitational weight (): .
Always sketch the vertical forces acting on the submerged mass before setting up the equation: .
CORRECTED PATH
ACEpath Teacher's DemonstrationLock it in
What does a spring scale measure when an object is suspended and submerged in a fluid?
It measures the apparent weight (tension ), which equals , not the buoyant force.
Similar question
A solid metal cylinder weighs in air and when completely submerged in an unknown oil. If the volume of the cylinder is and , find the density of the oil.
Answer
. Steps: 1) . 2) .
An aluminum block (density ) has a volume of . It is suspended from a scale and completely submerged in water (density ). Taking , determine the reading on the spring scale while submerged.
Answer
. Steps: 1) . 2) . 3) .
A crown of mass is suspended from a scale. In air, the scale reads . When immersed in pure water (, ), the scale reads . Is the crown made of pure gold (density )?
Answer
No. Steps: 1) . 2) Displaced volume . 3) Crown density , which is significantly less than pure gold ().