Resources
A circular saw blade with an outer radius of () is rated for a maximum safe rim linear speed of before carbide tooth detachment occurs. The saw motor accelerates the blade to an operating angular speed of . (a) Calculate the actual linear speed of the blade's outer cutting teeth at this operating speed. (b) Determine the critical maximum angular speed in at which the blade reaches its structural safety threshold , and state whether the operating speed exceeds this safety limit.
Answer and steps
Final answer
(a) ; (b) (The operating speed exceeds the safe threshold).
Steps
Relationship Between Linear Speed and Angular Speed
For a point rotating at a distance from the central axis of rotation with an angular speed (in radians per second), the tangential linear speed is given by:
Part (a): Calculate the Actual Linear Speed of the Outer Teeth
-
Identify the given values in standard SI units:
- Radius of the rim:
- Operating angular speed:
- Substitute into the formula:
- Round to three significant figures:
Part (b): Determine the Critical Angular Speed and Evaluate Safety
- Rearrange the linear-to-angular speed relation for :
-
Substitute the rated maximum safe linear speed:
- Round to three significant figures:
-
Compare operating values to safety thresholds:
- Operating angular speed:
- Actual linear speed:
Since both the actual angular speed and the outer edge linear speed exceed their respective critical limits, the operating speed exceeds this safety limit.
Common Pitfall: Always ensure the radius is converted to meters () and angular velocity is in radians per second () before multiplying or dividing; using centimeters directly will yield a linear speed off by a factor of .
Typical errors
01 The student fails to convert the radius from centimeters to meters, resulting in a linear speed that is off by a factor of 100.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You used the correct rotational relation , but you substituted without converting to meters. To obtain linear velocity in , the radius must be in meters ().
- Step 2
- Step 3
, so the operating speed exceeds the limit.
WHAT YOU DID WELL
Compliments from Your TeacherYou selected the correct relationship between linear speed and angular speed, .
You correctly converted the radius to meters in part (b) and computed .
You correctly concluded that the operating speed exceeds the manufacturer's safety limit.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou forgot to convert the radius from centimeters to meters in part (a), even though you correctly converted it to in part (b).
WHY IT HAPPENED
ACEpath Teacher's DiagnosisInconsistency in unit checking before numerical substitution: values given in non-SI units (such as ) must always be converted to base SI units (meters) to yield standard velocity units ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Base SI Units
In , if is in and is in , must be in meters ().
Write down given quantities with explicit units and convert centimeters to meters () before calculating.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute and into .
.
Round to three significant figures to obtain .
(a) ; (b) (The operating speed exceeds the safe threshold).
02 The student inverts the relationship between linear speed and angular speed by using ω = v * r instead of v / r, leading to an incorrect critical angular speed and conclusion.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
To solve for , you need to divide both sides by , giving . Multiplying by gives units of rather than and led to an incorrect critical value.
- Step 3Correct
Your qualitative conclusion is correct, but your comparison relied on the incorrect critical angular speed from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou converted and used the radius in standard SI units ().
You correctly used to find the actual tangential speed in Part (a).
You correctly set up an inequality between operating angular speed and critical angular speed to evaluate safety.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou multiplied linear speed by radius () instead of dividing by radius () when isolating angular velocity.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisInverting the algebraic operation when isolating in . A quick unit check () catches this rearrangement mistake immediately.
REASONING PATH
Your ACEpath teacher’s suggested approach- Isolate the Unknown Variable
If , then dividing both sides by gives .
Divide by when solving for so that .
- Perform a Dimensional Sanity Check
Linear speed has units of , and radius has units of . Therefore, .
Verify that multiplying yields , which flags an incorrect formula before calculating.
CORRECTED PATH
ACEpath Teacher's DemonstrationRearrange by dividing both sides by : .
Substitute the given values: .
Compare with operating speed: , confirming that the blade exceeds the safe limit.
(a) ; (b) (The operating speed exceeds the safe threshold).
03 The student confuses radius with diameter and halves the given radius to 0.075 m, which doubles the calculated critical angular speed and leads to the wrong safety conclusion.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You divided the given radius by . The problem already specifies the outer radius as , not a diameter, so no division by is needed.
- Step 3Correct
You rearranged the formula correctly, but substituting the halved radius caused your calculated critical angular speed to be doubled.
- Step 4
, so the operating speed does not exceed the limit.
Correct, so the operating speed exceeds the safe threshold.
Because your critical threshold was artificially inflated, your comparison led to the opposite safety conclusion. Comparing the actual speed to the true limit shows (or ), meaning the blade exceeds the safe limit.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the tangential velocity formula in part (a).
You converted centimeters to meters accurately.
You correctly rearranged for critical angular speed.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeDividing the given radius by before computing .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the given radius as if it were a diameter, likely out of habit from problems that provide diameter and require halving. This halved radius doubled and inverted your safety judgment.
REASONING PATH
Your ACEpath teacher’s suggested approach- Verify Dimension Labels
In rotational problems, represents the distance from the rotation axis to the point of interest (the radius).
Check whether the problem statement says 'radius' or 'diameter'. Only divide by when a diameter is explicitly provided.
- Direct Tangential Speed Comparison
Safety limits can be checked in either angular or linear units: .
Cross-check your conclusion by directly comparing with to immediately catch calculation slips.
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the given outer radius without halving.
Compute .
Compare operating speed to the critical threshold: since , the blade operates beyond its safe threshold.
(a) ; (b) (The operating speed exceeds the safe threshold).
Lock it in
What units must be used for and in the formula to obtain linear speed in ?
must be in meters () and must be in radians per second ().
Similar question
A grinding wheel has an outer diameter of and rotates at an angular speed of . Calculate the tangential speed at its outer edge in .
Answer
First find the radius: . Then use .
A laboratory centrifuge has an arm length of . The test tubes must not exceed a linear speed of . Determine the maximum allowable angular speed in and convert this value to revolutions per minute ().
Answer
Convert radius: . Calculate . Convert to : ().
Two pulleys are connected by a non-slipping belt. Pulley A has a radius of and rotates at . Pulley B has a radius of . (a) Find the belt linear speed in . (b) Find the angular speed of Pulley B.
Answer
(a) Convert . Belt speed . (b) Since the belt does not slip, . With , .