Resources

An ideal gas in a cylinder fitted with a movable piston absorbs 450 J450\text{ J} of heat from an external thermal reservoir while expanding isobarically at a constant pressure of 1.20×105 Pa1.20 \times 10^5\text{ Pa}. During this expansion, the gas volume increases from V1=2.00×10−3 m3V_1 = 2.00 \times 10^{-3}\text{ m}^3 to V2=3.50×10−3 m3V_2 = 3.50 \times 10^{-3}\text{ m}^3. Using the First Law of Thermodynamics (ΔU=Q−W\Delta U = Q - W, where WW is the work done by the gas), calculate: (a) the work done by the gas WW, and (b) the change in the internal energy of the gas ΔU\Delta U.

Answer and steps

Final answer

(a) W=180 JW = 180\text{ J}; (b) ΔU=270 J\Delta U = 270\text{ J}.

Steps

Part (a): Work Done by the Gas

When a gas expands at constant pressure (an isobaric process), the work WW done by the gas on its surroundings is given by:

W=PΔV=P(V2−V1)W = P \Delta V = P(V_2 - V_1)

  1. Identify the given values:

    • Constant pressure: P=1.20×105 PaP = 1.20 \times 10^5\text{ Pa}
    • Initial volume: V1=2.00×10−3 m3V_1 = 2.00 \times 10^{-3}\text{ m}^3
    • Final volume: V2=3.50×10−3 m3V_2 = 3.50 \times 10^{-3}\text{ m}^3
  2. Calculate the change in volume: ΔV=3.50×10−3 m3−2.00×10−3 m3=1.50×10−3 m3\Delta V = 3.50 \times 10^{-3}\text{ m}^3 - 2.00 \times 10^{-3}\text{ m}^3 = 1.50 \times 10^{-3}\text{ m}^3
  3. Calculate the work: W=(1.20×105 Pa)⋅(1.50×10−3 m3)=180 JW = (1.20 \times 10^5\text{ Pa}) \cdot (1.50 \times 10^{-3}\text{ m}^3) = 180\text{ J}

(Common Pitfall: When the gas expands, ΔV>0\Delta V > 0, so the work done by the gas is positive. If work were defined as done on the gas, it would carry a negative sign.)


Part (b): Change in Internal Energy

The First Law of Thermodynamics relates the change in internal energy ΔU\Delta U to heat added to the system QQ and work done by the system WW:

ΔU=Q−W\Delta U = Q - W

  1. Identify the heat transferred:

    • Since the gas absorbs heat from the reservoir, Q=+450 JQ = +450\text{ J}.
  2. Substitute QQ and WW into the First Law: ΔU=450 J−180 J=270 J\Delta U = 450\text{ J} - 180\text{ J} = 270\text{ J}

The internal energy of the gas increases by 270 J270\text{ J}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misapplies the sign convention of the First Law of Thermodynamics by adding work instead of subtracting work done by the gas, resulting in ΔU = 630 J.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    W=P(V2−V1)  ⟹  W=1.20×105×(3.50×10−3−2.00×10−3)  ⟹  W=1.20×105×1.50×10−3  ⟹  W=180 JW = P(V_2 - V_1) \implies W = 1.20 \times 10^5 \times (3.50 \times 10^{-3} - 2.00 \times 10^{-3}) \implies W = 1.20 \times 10^5 \times 1.50 \times 10^{-3} \implies W = 180\text{ J}

  2. Step 2

    ΔU=Q+W  ⟹  ΔU=450+180  ⟹  ΔU=630 J\Delta U = Q + W \implies \Delta U = 450 + 180 \implies \Delta U = 630\text{ J}

    Correct

    ΔU=Q−W  ⟹  ΔU=450 J−180 J=270 J\Delta U = Q - W \implies \Delta U = 450\text{ J} - 180\text{ J} = 270\text{ J}

    You used ΔU=Q+W\Delta U = Q + W instead of ΔU=Q−W\Delta U = Q - W. When WW represents work done by the gas, expanding against external pressure expends internal energy, so work must be subtracted from the heat absorbed.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the isobaric work formula W=PΔVW = P\Delta V with the given values.

You accurately computed the change in volume and final work done as 180 J180\text{ J}.

You correctly substituted the given heat transfer Q=450 JQ = 450\text{ J} into an energy conservation equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention confusion in the First Law of Thermodynamics

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the physics convention of the First Law (ΔU=Q−W\Delta U = Q - W, where WW is work done by the system) with the chemistry convention (ΔU=Q+W\Delta U = Q + W, where WW is work done on the system).

REASONING PATH
Your ACEpath teacher’s suggested approach
Work Convention Check
  • If WW is defined as work done BY the gas, expansion means energy leaves the gas, giving ΔU=Q−W\Delta U = Q - W.

  • Always verify whether WW refers to work done by the system or work done on the system before writing the First Law.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the First Law for work done by the gas: ΔU=Q−W\Delta U = Q - W.

  2. Substitute Q=450 JQ = 450\text{ J} and W=180 JW = 180\text{ J}: ΔU=450 J−180 J\Delta U = 450\text{ J} - 180\text{ J}.

  3. Compute the final difference: ΔU=270 J\Delta U = 270\text{ J}.

Final answer

(a) W=180 JW = 180\text{ J}; (b) ΔU=270 J\Delta U = 270\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the two common conventions for the First Law of Thermodynamics: ΔU=Q−Wby\Delta U = Q - W_{\text{by}} vs. ΔU=Q+Won\Delta U = Q + W_{\text{on}}.

  • Practice distinguishing physical situations where expansion lowers internal energy when no heat is added.

OverviewACEpath Teacher's Diagnosis

02 The student reverses the volume difference as V₁ - V₂ when calculating work during expansion, obtaining negative work of -180 J and a downstream ΔU of 630 J.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    W=P(V1−V2)  ⟹  W=1.20×105×(2.00×10−3−3.50×10−3)  ⟹  W=−180 JW = P(V_1 - V_2) \implies W = 1.20 \times 10^5 \times (2.00 \times 10^{-3} - 3.50 \times 10^{-3}) \implies W = -180\text{ J}

    Correct

    W=PΔV=P(V2−V1)=(1.20×105 Pa)(3.50×10−3 m3−2.00×10−3 m3)=180 JW = P\Delta V = P(V_2 - V_1) = (1.20 \times 10^5\text{ Pa})(3.50 \times 10^{-3}\text{ m}^3 - 2.00 \times 10^{-3}\text{ m}^3) = 180\text{ J}

    A change in any quantity is defined as final minus initial: ΔV=V2−V1\Delta V = V_2 - V_1. Because the gas expands, ΔV>0\Delta V > 0 and the work done by the gas must be positive (+180 J+180\text{ J}).

  2. Step 2

    ΔU=Q−W  ⟹  ΔU=450−(−180)  ⟹  ΔU=630 J\Delta U = Q - W \implies \Delta U = 450 - (-180) \implies \Delta U = 630\text{ J}

    Correct

    ΔU=Q−W=450 J−180 J=270 J\Delta U = Q - W = 450\text{ J} - 180\text{ J} = 270\text{ J}

    You substituted your values into the First Law correctly, but your result was distorted by the incorrect sign from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct isobaric work formula W=PΔVW = P\Delta V.

You stated the correct form of the First Law of Thermodynamics, ΔU=Q−W\Delta U = Q - W.

You handled the arithmetic operations and unit conversions accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed $\Delta V$ subtraction order

You set ΔV=V1−V2\Delta V = V_1 - V_2 instead of V2−V1V_2 - V_1.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the sign convention for thermodynamic work by calculating initial volume minus final volume instead of final minus initial, forgetting that expansion always does positive work on the surroundings.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define $\Delta$ as Final Minus Initial
  • In physics, any change ΔX\Delta X is always Xfinal−XinitialX_{\text{final}} - X_{\text{initial}}.

  • Always write out ΔV=V2−V1\Delta V = V_2 - V_1 before substituting numbers.

Physical Sign Check for Work
  • When a gas expands (V2>V1V_2 > V_1), it pushes outward against the surroundings, so Wby>0W_{\text{by}} > 0. When compressed, Wby<0W_{\text{by}} < 0.

  • Check the sign of WW against the physical process: expansion must yield a positive value for work done by the gas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the volume change: ΔV=V2−V1=3.50×10−3 m3−2.00×10−3 m3=+1.50×10−3 m3\Delta V = V_2 - V_1 = 3.50 \times 10^{-3}\text{ m}^3 - 2.00 \times 10^{-3}\text{ m}^3 = +1.50 \times 10^{-3}\text{ m}^3.

  2. Calculate the work done by the gas: W=PΔV=(1.20×105 Pa)(1.50×10−3 m3)=180 JW = P\Delta V = (1.20 \times 10^5\text{ Pa})(1.50 \times 10^{-3}\text{ m}^3) = 180\text{ J}.

  3. Apply the First Law: ΔU=Q−W=450 J−180 J=270 J\Delta U = Q - W = 450\text{ J} - 180\text{ J} = 270\text{ J}.

Final answer

(a) W=180 JW = 180\text{ J}; (b) ΔU=270 J\Delta U = 270\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the sign conventions for QQ and WW in the First Law ΔU=Q−W\Delta U = Q - W.

  • Practice identifying whether work is done 'by' or 'on' the gas from the change in volume.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies pressure by the final volume V₂ rather than the change in volume ΔV, giving W = 420 J and ΔU = 30 J.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    W=P×V2  ⟹  W=1.20×105×3.50×10−3  ⟹  W=420 JW = P \times V_2 \implies W = 1.20 \times 10^5 \times 3.50 \times 10^{-3} \implies W = 420\text{ J}

    Correct

    W=PΔV=P(V2−V1)=(1.20×105 Pa)(3.50×10−3 m3−2.00×10−3 m3)=180 JW = P\Delta V = P(V_2 - V_1) = (1.20 \times 10^5\text{ Pa})(3.50 \times 10^{-3}\text{ m}^3 - 2.00 \times 10^{-3}\text{ m}^3) = 180\text{ J}

    Work in an isobaric expansion is defined by the volume displaced, W=PΔV=P(V2−V1)W = P\Delta V = P(V_2 - V_1), rather than the total final volume PV2P V_2.

  2. Step 2

    ΔU=Q−W  ⟹  ΔU=450−420  ⟹  ΔU=30 J\Delta U = Q - W \implies \Delta U = 450 - 420 \implies \Delta U = 30\text{ J}

    Correct

    ΔU=Q−W=450 J−180 J=270 J\Delta U = Q - W = 450\text{ J} - 180\text{ J} = 270\text{ J}

    Your First Law equation and arithmetic were correct, but the result was affected by the incorrect value of WW from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the First Law formula ΔU=Q−W\Delta U = Q - W.

You correctly identified the heat absorbed as Q=+450 JQ = +450\text{ J}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Volume vs. Change in Volume Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the final volume V2V_2 as the displacement volume, forgetting that work depends on how much the boundary moved (the change in volume ΔV=V2−V1\Delta V = V_2 - V_1), not the absolute volume.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isobaric Work Definition
  • W=PΔV=P(Vf−Vi)W = P\Delta V = P(V_f - V_i)

  • Always find the difference ΔV=V2−V1\Delta V = V_2 - V_1 before multiplying by constant pressure PP.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the change in volume: ΔV=3.50×10−3 m3−2.00×10−3 m3=1.50×10−3 m3\Delta V = 3.50 \times 10^{-3}\text{ m}^3 - 2.00 \times 10^{-3}\text{ m}^3 = 1.50 \times 10^{-3}\text{ m}^3.

  2. Calculate the isobaric work: W=PΔV=(1.20×105 Pa)(1.50×10−3 m3)=180 JW = P\Delta V = (1.20 \times 10^5\text{ Pa})(1.50 \times 10^{-3}\text{ m}^3) = 180\text{ J}.

  3. Apply the First Law of Thermodynamics: ΔU=Q−W=450 J−180 J=270 J\Delta U = Q - W = 450\text{ J} - 180\text{ J} = 270\text{ J}.

Final answer

(a) W=180 JW = 180\text{ J}; (b) ΔU=270 J\Delta U = 270\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric meaning of work on a P-VP\text{-}V diagram: work represents the area under the curve between V1V_1 and V2V_2, which has a width of ΔV\Delta V, not V2V_2.

  • Practice identifying whether thermodynamic formulas require state values (such as absolute temperature TT) or process intervals (such as ΔV\Delta V or ΔT\Delta T).

Lock it in

Similar question

01

An ideal gas releases 220 J220\text{ J} of heat to the surroundings while being compressed isobarically at 1.50×105 Pa1.50 \times 10^5\text{ Pa} from 3.00×10−3 m33.00 \times 10^{-3}\text{ m}^3 to 1.80×10−3 m31.80 \times 10^{-3}\text{ m}^3. Find (a) the work WW done by the gas and (b) the change in internal energy ΔU\Delta U.

Answer

(a) W=P(V2−V1)=(1.50×105)(−1.20×10−3)=−180 JW = P(V_2 - V_1) = (1.50 \times 10^5)(-1.20 \times 10^{-3}) = -180\text{ J}. (b) With heat released, Q=−220 JQ = -220\text{ J}. Then ΔU=Q−W=−220 J−(−180 J)=−40 J\Delta U = Q - W = -220\text{ J} - (-180\text{ J}) = -40\text{ J}.

02

During an isobaric expansion at a pressure of 2.00×105 Pa2.00 \times 10^5\text{ Pa}, the internal energy of an ideal gas increases by 500 J500\text{ J} while the gas absorbs 900 J900\text{ J} of heat. Determine (a) the work WW done by the gas and (b) the increase in volume ΔV\Delta V.

Answer

(a) From ΔU=Q−W\Delta U = Q - W, W=Q−ΔU=900 J−500 J=400 JW = Q - \Delta U = 900\text{ J} - 500\text{ J} = 400\text{ J}. (b) Since W=PΔVW = P\Delta V, ΔV=WP=400 J2.00×105 Pa=2.00×10−3 m3\Delta V = \frac{W}{P} = \frac{400\text{ J}}{2.00 \times 10^5\text{ Pa}} = 2.00 \times 10^{-3}\text{ m}^3.

03

One mole of a monatomic ideal gas expands isobarically at 1.00×105 Pa1.00 \times 10^5\text{ Pa} such that its temperature rises from 300 K300\text{ K} to 400 K400\text{ K}. Given CV=32RC_V = \frac{3}{2}R and R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}, calculate: (a) the work done by the gas WW, (b) the change in internal energy ΔU\Delta U, and (c) the heat absorbed QQ.

Answer

(a) W=nRΔT=(1)(8.314)(100)≈831.4 JW = nR\Delta T = (1)(8.314)(100) \approx 831.4\text{ J}. (b) ΔU=nCVΔT=(1)(32×8.314)(100)≈1247.1 J\Delta U = n C_V \Delta T = (1)(\frac{3}{2} \times 8.314)(100) \approx 1247.1\text{ J}. (c) Q=ΔU+W=1247.1 J+831.4 J≈2078.5 JQ = \Delta U + W = 1247.1\text{ J} + 831.4\text{ J} \approx 2078.5\text{ J} (or Q=nCPΔT=52nRΔTQ = n C_P \Delta T = \frac{5}{2}nR\Delta T).

Loading workspace…