Resources
A student performs a resonance air-column experiment using a cylindrical resonance tube partially filled with water. A tuning fork vibrating at is held over the top open end of the tube. The water level is gradually lowered from the top rim. The first resonance is detected when the air column length is , and the second resonance is detected when the air column length is . Using these scale measurements to eliminate the end correction, determine: (a) the experimental speed of sound in , and (b) the acoustic end correction of the tube in millimeters.
Answer and steps
Final answer
(a) ; (b)
Steps
Relate the Resonance Lengths to the Wavelength
Standing Waves in a Tube Closed at One End
In a resonance tube with a water surface at the bottom and an open rim at the top, acoustic resonance occurs when the vibrating air column forms a displacement node at the water surface and a displacement antinode slightly above the open end. Because the air just outside the mouth of the tube also participates in the oscillation, the effective acoustic boundary extends beyond the rim by an end correction .
Let be the wavelength of the sound wave and be the end correction.
- First resonance (fundamental mode, ):
- Second resonance (third harmonic, ):
Determine the Wavelength and Speed of Sound
Subtracting the first resonance equation from the second eliminates the end correction :
Substitute the given lengths and :
Using the wave speed equation with :
Calculate the End Correction
Substitute back into the first resonance equation:
Convert the end correction to millimeters:
(Alternative check: .)
Common Pitfall to Avoid
Assuming the displacement antinode lies exactly at the physical lip of the tube (taking ) gives and , which erroneously ignores the mass of air oscillating just outside the tube rim. Always subtract consecutive resonance lengths to cancel out first.
Typical errors
01 The student forgets that the distance between consecutive resonances in a closed tube is a half-wavelength rather than a quarter-wavelength, calculating λ = L₂ - L₁ and getting half the actual speed of sound.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The distance between two consecutive resonance lengths for a fixed frequency in a closed-pipe system corresponds to the distance between consecutive displacement nodes, which is , not .
- Step 3Correct
Your wave speed formula is correct, but the value is halved because of the incorrect wavelength from Step 2.
- Step 4Correct
Your relationship is correct, but using the halved wavelength produced an unphysical negative end correction.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly subtracted the two resonant tube lengths to eliminate the acoustic end correction.
You correctly identified the wave speed relationship .
You set up the correct fundamental mode equation to solve for the end correction.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed the difference between consecutive resonant positions equals a full wavelength instead of a half-wavelength . In any standing wave, the spatial separation between adjacent nodes (or adjacent antinodes) is always .
REASONING PATH
Your ACEpath teacher’s suggested approach- Distance Between Successive Resonances
For a resonance tube closed at one end, consecutive resonant air-column lengths satisfy .
Always multiply the distance between consecutive resonances by 2 to determine the wavelength: .
CORRECTED PATH
ACEpath Teacher's Demonstration(a) ; (b)
02 The student ignores the end correction entirely when finding the speed of sound, assuming the first resonance corresponds simply to L₁ = λ / 4.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because an acoustic end correction exists beyond the open rim, the boundary condition for the fundamental mode is , not simply . You need to subtract the two consecutive resonance positions, , to find without assuming .
- Step 2Correct
Your calculation correctly multiplied frequency by your calculated wavelength, but the value was carried over from the incorrect wavelength in Step 1.
- Step 3Correct
The problem asks to determine the end correction using both resonance lengths. Once is known, substituting it into gives .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the wave speed relationship .
You converted centimeters to meters accurately when evaluating wave speed.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed the displacement antinode forms precisely at the physical mouth of the tube (), overlooking that acoustic waves extend slightly outside the tube by an end correction , which is eliminated by taking .
REASONING PATH
Your ACEpath teacher’s suggested approach- Eliminate end correction with consecutive resonances
For a tube closed at one end, consecutive resonant lengths differ by half a wavelength: .
Always subtract adjacent resonance lengths to calculate first, rather than multiplying the single length by 4.
- Calculate the end correction explicitly
The acoustic boundary satisfies .
After finding , substitute it back into to find the acoustic end correction.
CORRECTED PATH
ACEpath Teacher's DemonstrationRelate the two resonance lengths to the wavelength: and .
Subtract the two equations to cancel : .
Solve for wavelength: .
Compute the speed of sound: .
Compute the end correction: .
(a) ; (b)
03 The student calculates the end correction correctly in centimeters but converts to millimeters by dividing by 10 instead of multiplying by 10.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
Because , converting from centimeters to millimeters requires multiplying by , not dividing by .
WHAT YOU DID WELL
Compliments from Your TeacherYou eliminated the unknown end correction by taking the difference between consecutive resonance lengths.
You accurately solved for the wavelength and converted it to meters to find the speed of sound.
You used the fundamental resonance condition to find the correct numerical magnitude of the end correction in centimeters.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou divided by instead of multiplying by when converting to millimeters.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the direction of metric prefix scaling: millimeters are smaller than centimeters, so a given length contains more millimeters than centimeters ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Unit Scaling Sanity Check
Converting from a larger unit () to a smaller unit () must yield a larger numerical value.
Always write out the dimensional conversion factor explicitly: .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecall the conversion factor between centimeters and millimeters: .
Multiply the calculated end correction by : .
(a) ; (b)
Lock it in
In a standing wave, what is the spatial distance between two consecutive displacement nodes (or antinodes)?
(half a wavelength). A full wavelength contains two consecutive node-to-node segments.
Similar question
A resonance tube closed at the bottom by water resonates with a tuning fork at lengths and . Calculate the speed of sound and the end correction .
Answer
. . .
In a resonance tube experiment, resonances occur at air-column lengths of , , and . If the acoustic speed is , find the frequency of the source and determine whether the end correction is zero or non-zero.
Answer
The uniform spacing is . . Since , the end correction is (non-zero).
An open-closed organ pipe has an unknown effective length. Resonances are observed at consecutive frequencies of and . If the speed of sound is , determine the fundamental frequency and the physical length of the pipe if its end correction is .
Answer
For a closed tube, consecutive harmonic frequencies differ by : . The fundamental wavelength is . The effective length is . Accounting for end correction: .