Resources

In a hydraulic car lift at a service station, an incompressible hydraulic oil transmits pressure between two vertical cylindrical pistons whose tops are at the same vertical height. The input piston has a radius of r1=3.50 cmr_1 = 3.50\text{ cm}, while the output load piston has a radius of r2=21.0 cmr_2 = 21.0\text{ cm}. A technician needs to support a sedan of mass M=1850 kgM = 1850\text{ kg} resting on the output piston platform. Taking the acceleration due to gravity to be g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the downward force F1F_1 that must be applied to the input piston to keep the car held in static equilibrium.

Answer and steps

Final answer

F1=504 NF_1 = 504\text{ N}

Steps

01

Determine the force exerted on the output piston

The load piston supports the weight of the sedan. In static equilibrium, the upward force F2F_2 provided by the hydraulic fluid must balance the downward gravitational force of the car:

F2=MgF_2 = M g

Substitute the given mass and gravitational acceleration:

F2=(1850 kg)(9.80 m/s2)=18 130 NF_2 = (1850\text{ kg})(9.80\text{ m/s}^2) = 18\,130\text{ N}


02

Apply Pascal's principle

According to Pascal's principle, an external pressure applied to an enclosed, incompressible fluid is transmitted undiminished to every portion of the fluid and to the walls of its container.

Since the pistons are at the same vertical height, the hydrostatic pressure difference due to depth is zero, so the pressures at both pistons are equal:

P1=P2P_1 = P_2

F1A1=F2A2\frac{F_1}{A_1} = \frac{F_2}{A_2}

where:

  • F1F_1 is the input force applied over cross-sectional area A1A_1.
  • F2F_2 is the output force exerted over cross-sectional area A2A_2.

Rearranging to solve for the input force F1F_1:

F1=F2(A1A2)F_1 = F_2 \left(\frac{A_1}{A_2}\right)


03

Relate cross-sectional areas to the piston radii

Both pistons are cylindrical with circular cross-sections, so A=πr2A = \pi r^2:

A1A2=πr12πr22=(r1r2)2\frac{A_1}{A_2} = \frac{\pi r_1^2}{\pi r_2^2} = \left(\frac{r_1}{r_2}\right)^2

Compute the radius ratio:

r1r2=3.50 cm21.0 cm=16\frac{r_1}{r_2} = \frac{3.50\text{ cm}}{21.0\text{ cm}} = \frac{1}{6}

Therefore, the ratio of the cross-sectional areas is:

(r1r2)2=(16)2=136\left(\frac{r_1}{r_2}\right)^2 = \left(\frac{1}{6}\right)^2 = \frac{1}{36}

Common Pitfall: A frequent mistake is using the ratio of radii r1r2\frac{r_1}{r_2} directly rather than squaring it. The hydraulic mechanical advantage depends on the surface areas of the pistons, which scale with the square of their radii.


04

Calculate the required input force F1F_1

Substitute F2F_2 and the area ratio into the formula:

F1=18 130 N×136≈503.61 NF_1 = 18\,130\text{ N} \times \frac{1}{36} \approx 503.61\text{ N}

Rounding to three significant figures, consistent with the given data:

F1=504 NF_1 = 504\text{ N}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student scales force directly with the linear radius ratio instead of squaring the radii to account for circular piston area.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F2=M⋅g=1850⋅9.80=18130 NF_2 = M \cdot g = 1850 \cdot 9.80 = 18130\text{ N}

  2. Step 2

    F1r1=F2r2\frac{F_1}{r_1} = \frac{F_2}{r_2}

    Correct

    F1A1=F2A2  ⟹  F1πr12=F2πr22  ⟹  F1r12=F2r22\frac{F_1}{A_1} = \frac{F_2}{A_2} \implies \frac{F_1}{\pi r_1^2} = \frac{F_2}{\pi r_2^2} \implies \frac{F_1}{r_1^2} = \frac{F_2}{r_2^2}

    Pascal's principle states that pressure is transmitted equally throughout an enclosed fluid (P1=P2P_1 = P_2). Since pressure is force per unit area (P=FAP = \frac{F}{A}), the ratio involves cross-sectional areas (A=πr2A = \pi r^2), which scales with the square of the radii, not linearly with the radii.

  3. Step 3

    F1=18130⋅(3.5021.0)  ⟹  F1=18130⋅(16)≈3021.67 NF_1 = 18130 \cdot \left(\frac{3.50}{21.0}\right) \implies F_1 = 18130 \cdot \left(\frac{1}{6}\right) \approx 3021.67\text{ N}

    Correct

    F1=18130⋅(3.5021.0)2=18130⋅(16)2=18130⋅136≈504 NF_1 = 18130 \cdot \left(\frac{3.50}{21.0}\right)^2 = 18130 \cdot \left(\frac{1}{6}\right)^2 = 18130 \cdot \frac{1}{36} \approx 504\text{ N}

    Your arithmetic evaluation was carried out correctly based on your equation, but the numerical answer is incorrect due to the missing squared exponent on the radius ratio.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the equilibrium condition and calculated the total weight of the car as the output force.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear radius scaling instead of area scaling in Pascal's principle

You set the forces proportional to the radii rather than the cross-sectional areas of the pistons.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Pressure is force per unit area (P=F/AP = F/A), not force per unit length. Because the pistons are circular, the area scales with the square of the radius (A=πr2A = \pi r^2). Consequently, mechanical advantage scales as (r1/r2)2(r_1/r_2)^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall the definition of fluid pressure
  • P=FAP = \frac{F}{A}, where AA is cross-sectional surface area.

  • Always write out Pascal's principle in terms of areas first: F1A1=F2A2\frac{F_1}{A_1} = \frac{F_2}{A_2}.

Convert circular geometry to area
  • For a circular piston of radius rr, A=πr2A = \pi r^2, giving area ratio A1A2=(r1r2)2\frac{A_1}{A_2} = \left(\frac{r_1}{r_2}\right)^2.

  • Square the radius ratio (or diameter ratio) before multiplying by the force.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Equate the fluid pressures at the same depth: F1A1=F2A2\frac{F_1}{A_1} = \frac{F_2}{A_2}

  2. Substitute circular areas: A1=πr12A_1 = \pi r_1^2 and A2=πr22A_2 = \pi r_2^2, giving F1=F2(r1r2)2F_1 = F_2 \left(\frac{r_1}{r_2}\right)^2

  3. Substitute the numerical values: F1=18130 N×(3.50 cm21.0 cm)2=18130 N×(16)2=1813036 N≈503.61 NF_1 = 18130\text{ N} \times \left(\frac{3.50\text{ cm}}{21.0\text{ cm}}\right)^2 = 18130\text{ N} \times \left(\frac{1}{6}\right)^2 = \frac{18130}{36}\text{ N} \approx 503.61\text{ N}

Final answer

F1=504 NF_1 = 504\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that any formula involving fluid pressure divides force by area, not radius or diameter.

  • Practice identifying whether a given geometric measurement is a radius, diameter, or surface area before substituting it into hydraulic equilibrium equations.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the ratio of radii or areas, multiplying the output force by the area ratio instead of dividing, which erroneously yields a larger input force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F2=1850⋅9.80=18130 NF_2 = 1850 \cdot 9.80 = 18130\text{ N}

  2. Step 2

    A1=π⋅(3.50)2=38.48 cm2  ⟹  A2=π⋅(21.0)2=1385.44 cm2A_1 = \pi \cdot (3.50)^2 = 38.48\text{ cm}^2 \implies A_2 = \pi \cdot (21.0)^2 = 1385.44\text{ cm}^2

  3. Step 3

    F1=F2⋅A2A1F_1 = F_2 \cdot \frac{A_2}{A_1}

    Correct

    F1=F2⋅A1A2F_1 = F_2 \cdot \frac{A_1}{A_2}

    From Pascal's principle, pressure is equal throughout the fluid: F1A1=F2A2\frac{F_1}{A_1} = \frac{F_2}{A_2}. Multiplying both sides by A1A_1 gives F1=F2(A1A2)F_1 = F_2 \left(\frac{A_1}{A_2}\right), not F2(A2A1)F_2 \left(\frac{A_2}{A_1}\right).

  4. Step 4

    F1=18130⋅(21.03.50)2=18130⋅36=652680 NF_1 = 18130 \cdot \left(\frac{21.0}{3.50}\right)^2 = 18130 \cdot 36 = 652680\text{ N}

    Correct

    F1=18 130⋅(3.5021.0)2=18 13036≈504 NF_1 = 18\,130 \cdot \left(\frac{3.50}{21.0}\right)^2 = \frac{18\,130}{36} \approx 504\text{ N}

    Your arithmetic was carried out correctly according to your formula, but the result is 36 times too large because of the inverted ratio in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the output load force by multiplying the car's mass by gravitational acceleration.

You correctly recognized that the hydraulic advantage scales with the square of the piston radii rather than just the linear radii.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted algebraic ratio

You inverted the area fraction when isolating F1F_1 from F1A1=F2A2\frac{F_1}{A_1} = \frac{F_2}{A_2}, multiplying by A2A1\frac{A_2}{A_1} instead of A1A2\frac{A_1}{A_2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You solved for the input force without verifying whether the hydraulic machine should provide a mechanical advantage. A hydraulic lift is designed so that a smaller input area requires a much smaller input force (F1<F2F_1 < F_2). Obtaining an input force greater than the car's weight indicates an inverted ratio.

REASONING PATH
Your ACEpath teacher’s suggested approach
Equating Hydrostatic Pressures
  • By Pascal's principle, equal fluid heights mean equal pressures: P1=P2  ⟹  F1A1=F2A2P_1 = P_2 \implies \frac{F_1}{A_1} = \frac{F_2}{A_2}.

  • Isolate the unknown force by cross-multiplying: F1=F2(A1A2)=F2(r1r2)2F_1 = F_2 \left(\frac{A_1}{A_2}\right) = F_2 \left(\frac{r_1}{r_2}\right)^2.

Sanity Check Mechanical Advantage
  • Force is directly proportional to area when pressure is constant: F∝AF \propto A.

  • Check your final number: since the input piston is smaller (A1<A2A_1 < A_2), the input force must be smaller than the load (F1<F2F_1 < F_2).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the transmitted pressures equal: F1A1=F2A2\frac{F_1}{A_1} = \frac{F_2}{A_2}.

  2. Multiply both sides by A1A_1: F1=F2(A1A2)=F2(r1r2)2F_1 = F_2 \left(\frac{A_1}{A_2}\right) = F_2 \left(\frac{r_1}{r_2}\right)^2.

  3. Substitute the known values: F1=18 130 N×(3.50 cm21.0 cm)2=18 130 N×(16)2=18 13036 N≈503.61 NF_1 = 18\,130\text{ N} \times \left(\frac{3.50\text{ cm}}{21.0\text{ cm}}\right)^2 = 18\,130\text{ N} \times \left(\frac{1}{6}\right)^2 = \frac{18\,130}{36}\text{ N} \approx 503.61\text{ N}.

Final answer

F1=504 NF_1 = 504\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the algebraic isolation step when dealing with proportional relationships (P1=P2P_1 = P_2).

  • Always perform a physical sanity check on hydraulic systems: verify that the smaller piston receives the smaller force.

OverviewACEpath Teacher's Diagnosis

03 The student uses the car's mass directly as the load force on the output piston, omitting the acceleration due to gravity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F2=1850 NF_2 = 1850\text{ N}

    Correct

    F2=Mg=(1850 kg)(9.80 m/s2)=18 130 NF_2 = Mg = (1850\text{ kg})(9.80\text{ m/s}^2) = 18\,130\text{ N}

    You set the downward load force equal to the car's mass in kilograms rather than calculating its weight in newtons using W=MgW = Mg.

  2. Step 2

    F1=F2⋅(r1r2)2⟹F1=1850⋅(3.5021.0)2F_1 = F_2 \cdot \left(\frac{r_1}{r_2}\right)^2 \Longrightarrow F_1 = 1850 \cdot \left(\frac{3.50}{21.0}\right)^2

    Correct

    F1=F2⋅(r1r2)2=18 130⋅(3.5021.0)2F_1 = F_2 \cdot \left(\frac{r_1}{r_2}\right)^2 = 18\,130 \cdot \left(\frac{3.50}{21.0}\right)^2

    Your application of Pascal's principle and the squared radius ratio (r1r2)2=136\left(\frac{r_1}{r_2}\right)^2 = \frac{1}{36} is conceptually sound, but it carries forward the incorrect value of F2F_2.

  3. Step 3

    F1=1850⋅(136)≈51.39 NF_1 = 1850 \cdot \left(\frac{1}{36}\right) \approx 51.39\text{ N}

    Correct

    F1=18 130⋅(136)≈504 NF_1 = 18\,130 \cdot \left(\frac{1}{36}\right) \approx 504\text{ N}

    You evaluated the arithmetic accurately based on your substituted value, but the final force is off by a factor of gg due to the earlier error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied Pascal's principle relating input and output forces to their respective cross-sectional areas.

You correctly recognized that the area ratio scales with the square of the radii, (r1r2)2\left(\frac{r_1}{r_2}\right)^2.

You executed the algebraic simplification and fraction reduction accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Mass with Weight

You assigned the numerical mass value 1850 kg1850\text{ kg} directly as a force of 1850 N1850\text{ N} on the output piston.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating mass (an intrinsic scalar property measured in kilograms) with weight or gravitational force (W=MgW = Mg, measured in newtons) when determining load forces in static equilibrium.

REASONING PATH
Your ACEpath teacher’s suggested approach
Convert Mass to Force
  • The downward load force exerted by a resting mass MM under gravity is its weight: F=MgF = Mg.

  • Always verify whether a given quantity is a mass in kg\text{kg} or a force in N\text{N} before substituting into Pascal's principle.

Area vs. Radius Scaling
  • For circular pistons, cross-sectional area is A=πr2A = \pi r^2, meaning A1A2=(r1r2)2\frac{A_1}{A_2} = \left(\frac{r_1}{r_2}\right)^2.

  • Keep squaring the radius ratio as you did here, rather than taking the linear ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the correct output load force: F2=Mg=(1850 kg)(9.80 m/s2)=18 130 NF_2 = Mg = (1850\text{ kg})(9.80\text{ m/s}^2) = 18\,130\text{ N}.

  2. Apply Pascal's principle: F1=F2(r1r2)2=18 130 N×(3.50 cm21.0 cm)2=18 130 N×136F_1 = F_2 \left(\frac{r_1}{r_2}\right)^2 = 18\,130\text{ N} \times \left(\frac{3.50\text{ cm}}{21.0\text{ cm}}\right)^2 = 18\,130\text{ N} \times \frac{1}{36}.

  3. Compute the required input force: F1≈503.61 NF_1 \approx 503.61\text{ N}.

Final answer

F1=504 NF_1 = 504\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • When a problem gives a mass supported by a piston, write Fload=MgF_{\text{load}} = Mg as your explicit first step.

  • Check units at each substitution: kilograms cannot substitute for newtons without multiplying by an acceleration.

Lock it in

Similar question

01

A hydraulic press has an input piston with a radius of 2.0 cm2.0\text{ cm} and an output piston with a radius of 10.0 cm10.0\text{ cm}. What downward force must be applied to the input piston to balance a load of 4500 N4500\text{ N} on the output piston?

Answer

F1=180 NF_1 = 180\text{ N}. Using Pascal's principle, F1=F2(r1r2)2=4500 N×(2.010.0)2=4500×125=180 NF_1 = F_2 \left(\frac{r_1}{r_2}\right)^2 = 4500\text{ N} \times \left(\frac{2.0}{10.0}\right)^2 = 4500 \times \frac{1}{25} = 180\text{ N}.

02

In a hydraulic braking system, the master cylinder piston has a diameter of 1.50 cm1.50\text{ cm}, and the slave cylinder piston at a wheel brake has a diameter of 4.50 cm4.50\text{ cm}. If the driver's foot produces a force of 120 N120\text{ N} on the master cylinder piston, calculate the force exerted by the slave cylinder on the brake pad.

Answer

F2=1080 NF_2 = 1080\text{ N}. The area ratio is (d2d1)2=(4.501.50)2=32=9\left(\frac{d_2}{d_1}\right)^2 = \left(\frac{4.50}{1.50}\right)^2 = 3^2 = 9. Thus, F2=F1×9=120 N×9=1080 NF_2 = F_1 \times 9 = 120\text{ N} \times 9 = 1080\text{ N}.

03

A technician wants a hydraulic lift to produce an output force of 24 000 N24\,000\text{ N} while applying no more than 150 N150\text{ N} of input force. If the input piston has a radius of 2.50 cm2.50\text{ cm}, find the minimum radius required for the output piston.

Answer

r2=31.6 cmr_2 = 31.6\text{ cm}. The required area ratio is A2A1=F2F1=24000150=160\frac{A_2}{A_1} = \frac{F_2}{F_1} = \frac{24000}{150} = 160. Since A2A1=(r2r1)2\frac{A_2}{A_1} = \left(\frac{r_2}{r_1}\right)^2, the radius ratio is r2r1=160≈12.65\frac{r_2}{r_1} = \sqrt{160} \approx 12.65. Therefore, r2=2.50 cm×12.65≈31.6 cmr_2 = 2.50\text{ cm} \times 12.65 \approx 31.6\text{ cm}.

Loading workspace…