Resources
An automated sensor mounted at ground level records a vertically launched atmospheric test canister descending in free fall with an instantaneous downward speed of at an elevation of above the release platform (). Assuming the canister was launched vertically upward from ground level at time with zero initial elevation and experienced only uniform downward gravitational acceleration , reverse-engineer: (a) the initial vertical launch velocity , and (b) the maximum altitude attained above the launch platform.
Answer and steps
Final answer
(a) ; (b)
Steps
Part (a): Determine the Initial Launch Velocity
-
Establish the Coordinate System and Governing Equations
Define the vertically upward direction as positive (), with the release platform at ground level () and launch time . Under uniform gravity, the acceleration is constant:The motion is governed by standard one-dimensional kinematic equations:
-
Analyze the Trajectory Parameters
In integer-second intervals under :- An object falling from rest reaches a speed of after , covering a distance of from the peak.
- For a full trajectory with integer-second symmetry, the canister reaches the elevation on its descent at , and continues descending to reach a speed of at ( prior to landing).
-
Calculate the Initial Velocity
Using the descent velocity condition :Verification at :
Substituting and into the position equation: This confirms that the trajectory consistently satisfies the launch conditions, giving:
Part (b): Determine the Maximum Altitude
- Condition at Maximum Altitude
At the highest point of vertical flight (the apex), the vertical velocity momentarily drops to zero: - Calculate Using Kinematics
Applying the velocity-displacement relation between the launch point (, ) and the apex (, ): -
Substitute the Numerical Values
Rounding to three significant figures:
Typical errors
01 The student forgets that the canister started at ground level and misinterprets the 78.4 m observation height as the additional height gained from launch rather than adding displacement to ground level, effectively taking y₁ as the launch point.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
When isolating from , you subtracted instead of adding it to both sides.
- Step 3Correct
Because of the rearranged sign error, the two identical terms cancelled out to give an initial velocity of .
- Step 4Correct
Substituting carried the error through, giving an apex altitude of .
WHAT YOU DID WELL
Compliments from Your TeacherYou selected the correct kinematic equation relating velocity, vertical displacement, and gravitational acceleration.
You correctly substituted the numerical parameters into your algebraic expression.
You properly set the apex velocity to zero when establishing the equation for maximum altitude.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou changed the sign incorrectly when moving across the equals sign, writing instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisRushing through linear algebraic rearrangement without performing the explicit inverse operation on both sides of the equality.
REASONING PATH
Your ACEpath teacher’s suggested approach- Inverse Operation Check
To cancel a negative term on one side of an equation, add to both sides.
From , add to both sides to obtain .
- Physical Reasonableness Check
A projectile launched upward must have a strictly positive launch speed () to reach an elevation of .
Always pause when a calculation yields for an object launched upward from ground level.
CORRECTED PATH
ACEpath Teacher's DemonstrationAdd to both sides of : .
Substitute the given values: .
Solve for the launch velocity: .
Apply the apex condition at maximum altitude: .
(a) ; (b)
02 The student treats the maximum altitude as being measured relative to the observation height y₁ = 78.4 m and forgets to add y₁ to find the total altitude above the launch platform.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You set the maximum altitude equal to , but represents only the vertical displacement above the sensor at . To find the maximum altitude above the launch platform at ground level (), you must add to .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly related the instantaneous velocity and launch velocity using constant-acceleration kinematics.
You recognized that vertical velocity is zero at the trajectory apex.
You accurately solved for the displacement between the sensor height and the apex.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeWHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated displacement relative to an elevated observation point () with absolute position relative to the ground coordinate origin ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Reference Level Verification
Absolute position and relative displacement are related by .
Whenever you compute displacement starting from an intermediate altitude , explicitly label the variable as before solving for .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that the sensor elevation is above the ground platform.
Add the upward displacement from the sensor to the apex: .
(or )
03 The student omits the factor of 2 in the kinematic equation v² = v₀² - 2gΔy, writing v² = v₀² - gΔy.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You set up the relation between velocity and displacement, but the kinematic formula is . Missing the factor of halved the gravitational term from to .
- Step 2Correct
You correctly set the apex velocity to zero, but you repeated the missing factor of in and carried over the incorrect from part (a), doubling the true maximum height.
WHAT YOU DID WELL
Compliments from Your TeacherYou chose the ideal kinematic formula relating velocity and displacement to avoid solving for elapsed time.
You correctly identified the boundary conditions at launch, with , and at maximum altitude.
You performed all arithmetic and algebraic rearrangements accurately according to your written equations.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the work-energy derived kinematic equation (where the coefficient originates from integrating acceleration with respect to displacement, or ) with a linear relation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Work-Energy Memory Check
Whenever you relate velocity squared to displacement, confirm that the acceleration term has a factor of .
- Apex Height Formula
At the peak of vertical flight (), , not .
Check that the denominator is rather than just .
CORRECTED PATH
ACEpath Teacher's DemonstrationUse to solve for : .
Compute , giving .
Apply at the apex to find .
(a) ; (b)
Lock it in
When isolating from the equation , what is the correct algebraic expression?
. You add to both sides to eliminate the subtracted term.
Similar question
A ball is launched vertically upward from ground level. At a height of , its upward speed is measured to be . Taking , calculate its initial launch speed .
Answer
. Using .
A stone is thrown vertically upward from ground level. On its way down, it passes an observation window at height with a downward speed of . Using , find: (a) the launch speed , and (b) the maximum altitude above the ground.
Answer
(a) ; (b) . Key steps: , so . Then .
A sounding rocket ascends vertically from the ground and enters unpowered free fall. A sensor detects it falling downward at at an elevation of . Assuming free fall throughout under , determine: (a) the equivalent initial vertical velocity at ground level, and (b) the total time elapsed from launch until it reaches the sensor.
Answer
(a) ; (b) . Key steps: (a) . (b) Using velocity with upward positive: .