Resources

A centrifuge rotor accelerates from rest such that its angular acceleration increases linearly with time according to α(t)=bt\alpha(t) = bt, where b=1.60 rad/s3b = 1.60\text{ rad/s}^3. Rather than determining the kinematic states at a specified time, find the exact elapsed time t1t_1 required for the rotor to accumulate an angular displacement of Δθ=54.0 rad\Delta\theta = 54.0\text{ rad}.

Answer and steps

Final answer

t1=5.87 st_1 = 5.87\text{ s}

Steps

01

Relate Angular Acceleration to Angular Velocity

To find the elapsed time t1t_1 for a given angular displacement when angular acceleration is time-dependent, integrate the angular kinematic equations with respect to time.

By definition, angular acceleration α(t)\alpha(t) is the time rate of change of angular velocity ω(t)\omega(t): α(t)=dωdt\alpha(t) = \frac{d\omega}{dt}

Substitute α(t)=bt\alpha(t) = bt and integrate from t=0t = 0 (where the rotor is at rest, so ω(0)=0\omega(0) = 0) to an arbitrary time tt: ω(t)−ω(0)=∫0tbt′ dt′\omega(t) - \omega(0) = \int_0^t bt' \, dt'

ω(t)=12bt2\omega(t) = \frac{1}{2}bt^2

02

Relate Angular Velocity to Angular Displacement

Angular velocity is the time derivative of angular position: ω(t)=dθdt\omega(t) = \frac{d\theta}{dt}

Integrate ω(t)\omega(t) over the interval from t=0t = 0 to t1t_1 to determine the accumulated angular displacement Δθ\Delta\theta: Δθ=∫0t1ω(t) dt=∫0t112bt2 dt\Delta\theta = \int_0^{t_1} \omega(t) \, dt = \int_0^{t_1} \frac{1}{2}bt^2 \, dt

Δθ=[16bt3]0t1=16bt13\Delta\theta = \left[ \frac{1}{6}bt^3 \right]_0^{t_1} = \frac{1}{6}bt_1^3

Common Pitfall: The standard rotational kinematic equations, such as Δθ=ω0t+12αt2\Delta\theta = \omega_0 t + \frac{1}{2}\alpha t^2, apply only when angular acceleration is constant. Because α\alpha varies linearly with time here, using constant-acceleration formulas leads to an incorrect factor of 12\frac{1}{2} rather than the correct 16\frac{1}{6}.

03

Solve for Elapsed Time t1t_1

Rearrange the equation to isolate t1t_1: t1=(6Δθb)1/3t_1 = \left( \frac{6\Delta\theta}{b} \right)^{1/3}

Substitute the given numerical values (Δθ=54.0 rad\Delta\theta = 54.0\text{ rad} and b=1.60 rad/s3b = 1.60\text{ rad/s}^3): t1=(6⋅54.01.60)1/3=(202.5)1/3≈5.87 st_1 = \left( \frac{6 \cdot 54.0}{1.60} \right)^{1/3} = (202.5)^{1/3} \approx 5.87\text{ s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misapplies the constant-acceleration kinematic formula Δθ = (1/2)αt² using the time-dependent expression for α, omitting the calculus integrations.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δθ=12αt2  ⟹  Δθ=12(bt)t2=12bt3\Delta\theta = \frac{1}{2}\alpha t^2 \implies \Delta\theta = \frac{1}{2}(bt)t^2 = \frac{1}{2}bt^3

    Correct

    Δθ=∫0t1ω(t) dt=∫0t1(∫0tbt′ dt′)dt=16bt13\Delta\theta = \int_0^{t_1} \omega(t)\,dt = \int_0^{t_1}\left(\int_0^t bt'\,dt'\right)dt = \frac{1}{6}bt_1^3

    The formula Δθ=ω0t+12αt2\Delta\theta = \omega_0 t + \frac{1}{2}\alpha t^2 is derived assuming constant angular acceleration α\alpha. Since α(t)=bt\alpha(t) = bt is time-dependent, substituting α(t)\alpha(t) directly into this formula misses the factor of 13\frac{1}{3} that arises from integrating t2t^2, resulting in a coefficient of 12\frac{1}{2} instead of the correct 16\frac{1}{6}.

  2. Step 2

    54.0=12(1.60)t13  ⟹  t13=54.00.80=67.554.0 = \frac{1}{2}(1.60)t_1^3 \implies t_1^3 = \frac{54.0}{0.80} = 67.5

    Correct

    54.0=16(1.60)t13  ⟹  t13=6⋅54.01.60=202.554.0 = \frac{1}{6}(1.60)t_1^3 \implies t_1^3 = \frac{6 \cdot 54.0}{1.60} = 202.5

    Your algebraic manipulation and arithmetic were executed correctly based on your equation, but the values were affected by the missing integration factor.

  3. Step 3

    t1=(67.5)1/3≈4.07 st_1 = (67.5)^{1/3} \approx 4.07\text{ s}

    Correct

    t1=(202.5)1/3≈5.87 st_1 = (202.5)^{1/3} \approx 5.87\text{ s}

    Your cube root calculation follows correctly from your previous line, but it produces an incorrect final elapsed time due to the earlier formula error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the initial angular velocity was zero.

You successfully performed the algebraic simplification and took the cube root to solve for time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misapplying constant-acceleration formula to variable acceleration

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the kinematic equation Δθ=12αt2\Delta\theta = \frac{1}{2}\alpha t^2 as universally valid and substituted a time-dependent α(t)\alpha(t) into it, rather than integrating α(t)\alpha(t) twice with respect to time from fundamental calculus definitions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Acceleration Constancy
  • Standard kinematic formulas like Δθ=ω0t+12αt2\Delta\theta = \omega_0 t + \frac{1}{2}\alpha t^2 and ω=ω0+αt\omega = \omega_0 + \alpha t apply ONLY when α\alpha is constant.

  • Before choosing a kinematic equation, verify whether α\alpha depends on time. If α=α(t)\alpha = \alpha(t), use calculus.

Integrate Sequentially
  • ω(t)=ω0+∫0tα(t′) dt′\omega(t) = \omega_0 + \int_0^t \alpha(t')\,dt' and Δθ=∫0tω(t′) dt′\Delta\theta = \int_0^t \omega(t')\,dt'.

  • Integrate α(t)=bt\alpha(t) = bt once to get ω(t)=12bt2\omega(t) = \frac{1}{2}bt^2, then integrate again to get Δθ(t)=16bt3\Delta\theta(t) = \frac{1}{6}bt^3.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ω(t)=∫0tbt′ dt′=12bt2\omega(t) = \int_0^t bt'\,dt' = \frac{1}{2}bt^2

  2. Δθ=∫0t112bt2 dt=[16bt3]0t1=16bt13\Delta\theta = \int_0^{t_1} \frac{1}{2}bt^2\,dt = \left[\frac{1}{6}bt^3\right]_0^{t_1} = \frac{1}{6}bt_1^3

  3. 54.0=16(1.60)t13  ⟹  t13=202.554.0 = \frac{1}{6}(1.60)t_1^3 \implies t_1^3 = 202.5

  4. t1=(202.5)1/3≈5.87 st_1 = (202.5)^{1/3} \approx 5.87\text{ s}

Final answer

t1≈5.87 st_1 \approx 5.87\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always verify whether acceleration is constant before picking kinematic formulas.

  • Practice setting up double integrals for kinematics whenever acceleration is given as a function of time.

OverviewACEpath Teacher's Diagnosis

02 The student integrates once to obtain displacement directly from angular acceleration instead of integrating twice, confusing angular acceleration with angular velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δθ=∫α dt=∫bt dt  ⟹  Δθ=12bt2\Delta\theta = \int \alpha\,dt = \int bt\,dt \implies \Delta\theta = \frac{1}{2}bt^2

    Correct

    ω(t)=∫α(t) dt=12bt2  ⟹  Δθ=∫0t1ω(t) dt=16bt13\omega(t) = \int \alpha(t)\,dt = \frac{1}{2}bt^2 \implies \Delta\theta = \int_0^{t_1} \omega(t)\,dt = \frac{1}{6}bt_1^3

    Integrating angular acceleration α(t)\alpha(t) with respect to time yields the angular velocity ω(t)\omega(t), not the angular displacement Δθ\Delta\theta. To obtain Δθ\Delta\theta, you must integrate a second time with respect to time.

  2. Step 2

    54.0=(12)(1.60)t12  ⟹  t12=54.00.80=67.554.0 = \left(\frac{1}{2}\right)(1.60)t_1^2 \implies t_1^2 = \frac{54.0}{0.80} = 67.5

    Correct

    54.0=16(1.60)t13  ⟹  t13=6⋅54.01.60=202.554.0 = \frac{1}{6}(1.60)t_1^3 \implies t_1^3 = \frac{6 \cdot 54.0}{1.60} = 202.5

    This step followed your first-step formula algebraically, but it used the incorrect relationship t12t_1^2 and coefficient 12\frac{1}{2} instead of t13t_1^3 and 16\frac{1}{6}.

  3. Step 3

    t1=67.5≈8.22 st_1 = \sqrt{67.5} \approx 8.22\text{ s}

    Correct

    t1=(202.5)1/3≈5.87 st_1 = (202.5)^{1/3} \approx 5.87\text{ s}

    Evaluating the square root instead of the cube root stems directly from the single integration in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that a time-dependent acceleration requires integration rather than constant-acceleration formulas.

You performed the power rule of integration correctly on the linear term btbt.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematic hierarchy confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated angular acceleration as the direct derivative of angular displacement ( α=dθ/dt \,\alpha = d\theta/dt\,), omitting the intermediate state of angular velocity (ω=dθ/dt\omega = d\theta/dt and α=dω/dt\alpha = d\omega/dt).

REASONING PATH
Your ACEpath teacher’s suggested approach
Rotational Kinematics Chain
  • α(t)=dωdt\alpha(t) = \frac{d\omega}{dt} and ω(t)=dθdt\omega(t) = \frac{d\theta}{dt}, so finding Δθ\Delta\theta from α(t)\alpha(t) requires two successive time integrations.

  • Always integrate α(t)\alpha(t) first to get ω(t)\omega(t), then integrate ω(t)\omega(t) to obtain Δθ(t)\Delta\theta(t).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Δθ=∫0t1ω(t) dt=∫0t112bt2 dt=16bt13\Delta\theta = \int_0^{t_1} \omega(t)\,dt = \int_0^{t_1} \frac{1}{2}bt^2\,dt = \frac{1}{6}bt_1^3

  2. t13=6⋅Δθb=6⋅54.01.60=202.5t_1^3 = \frac{6 \cdot \Delta\theta}{b} = \frac{6 \cdot 54.0}{1.60} = 202.5

  3. t1=(202.5)1/3≈5.87 st_1 = (202.5)^{1/3} \approx 5.87\text{ s}

Final answer

t1=5.87 st_1 = 5.87\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the two-step integration chain explicitly whenever given non-constant acceleration: acceleration →\to velocity →\to position.

  • Check units at each step: ∫α dt\int \alpha\,dt yields rad/s\text{rad/s}, which has units of velocity, not displacement.

OverviewACEpath Teacher's Diagnosis

03 The student integrates twice but forgets the factor of 1/2 from the first integration when integrating the second time, yielding Δθ = (1/3)bt³ instead of (1/6)bt³.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ω(t)=(12)bt2\omega(t) = \left(\frac{1}{2}\right)bt^2

  2. Step 2

    Δθ=∫bt2 dt=(13)bt3\Delta\theta = \int bt^2\,dt = \left(\frac{1}{3}\right)bt^3

    Correct

    Δθ=∫0t112bt2 dt=16bt13\Delta\theta = \int_0^{t_1} \frac{1}{2}bt^2\,dt = \frac{1}{6}bt_1^3

    You dropped the constant factor of 12\frac{1}{2} from your expression for ω(t)\omega(t) when setting up the integral for Δθ\Delta\theta, integrating bt2bt^2 instead of 12bt2\frac{1}{2}bt^2.

  3. Step 3

    54.0=(13)(1.60)t13  ⟹  t13=3⋅54.01.60=101.25  ⟹  t1=(101.25)1/3≈4.66 s54.0 = \left(\frac{1}{3}\right)(1.60)t_1^3 \implies t_1^3 = \frac{3 \cdot 54.0}{1.60} = 101.25 \implies t_1 = (101.25)^{1/3} \approx 4.66\text{ s}

    Correct

    54.0=16(1.60)t13  ⟹  t1=(6⋅54.01.60)1/3≈5.87 s54.0 = \frac{1}{6}(1.60)t_1^3 \implies t_1 = \left(\frac{6 \cdot 54.0}{1.60}\right)^{1/3} \approx 5.87\text{ s}

    You carried out the algebraic manipulation and cube root correctly based on your equation, but the result is inaccurate due to the missing factor in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that finding angular velocity from time-dependent acceleration requires integration.

You performed the algebraic rearrangement and cube root computation accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted constant coefficient during successive integration

You accidentally dropped the factor of 12\frac{1}{2} when substituting ω(t)\omega(t) into the integral for Δθ\Delta\theta.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Failing to substitute the full algebraic expression from the previous step into the second integral, leading to an overlooked constant multiplier during iterated integration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Carry full expressions into successive integrals
  • When integrating repeatedly, substitute the entire preceding function, including all scalar coefficients: Δθ=∫ω(t) dt=∫[k⋅f(t)] dt=k∫f(t) dt\Delta\theta = \int \omega(t)\,dt = \int [k \cdot f(t)]\,dt = k \int f(t)\,dt.

  • Always write out ∫[… ] dt\int [\dots]\,dt by copying the exact expression found in the previous step before applying the power rule.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the full expression ω(t)=12bt2\omega(t) = \frac{1}{2}bt^2 into Δθ=∫0t1ω(t) dt\Delta\theta = \int_0^{t_1} \omega(t)\,dt.

  2. Factor out the constant: Δθ=12b∫0t1t2 dt=12b[t33]0t1=16bt13\Delta\theta = \frac{1}{2}b \int_0^{t_1} t^2\,dt = \frac{1}{2}b \left[\frac{t^3}{3}\right]_0^{t_1} = \frac{1}{6}bt_1^3.

  3. Substitute Δθ=54.0 rad\Delta\theta = 54.0\text{ rad} and b=1.60 rad/s3b = 1.60\text{ rad/s}^3: 54.0=16(1.60)t1354.0 = \frac{1}{6}(1.60)t_1^3.

  4. Solve for t1t_1: t13=6×54.01.60=202.5  ⟹  t1=(202.5)1/3≈5.87 st_1^3 = \frac{6 \times 54.0}{1.60} = 202.5 \implies t_1 = (202.5)^{1/3} \approx 5.87\text{ s}.

Final answer

t1≈5.87 st_1 \approx 5.87\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice double-integration problems by writing each integration step as an explicit substitution with brackets.

  • Perform a quick dimensional or fractional check on consecutive powers: integrating tnt^n twice yields tn+2(n+1)(n+2)\frac{t^{n+2}}{(n+1)(n+2)}.

Lock it in

Similar question

01

A disk starts from rest at t=0t = 0 with angular acceleration α(t)=ct2\alpha(t) = ct^2, where c=3.0 rad/s4c = 3.0\text{ rad/s}^4. Find the expression for its angular displacement Δθ(t)\Delta\theta(t) as a function of time.

Answer

Δθ(t)=112ct4=0.25t4 rad\Delta\theta(t) = \frac{1}{12}ct^4 = 0.25 t^4\text{ rad}.

Key steps:

  1. Integrate α(t)\alpha(t): ω(t)=∫0tct′2 dt′=13ct3\omega(t) = \int_0^t ct'^2\,dt' = \frac{1}{3}ct^3.
  2. Integrate ω(t)\omega(t): Δθ(t)=∫0t13ct′3 dt′=112ct4\Delta\theta(t) = \int_0^t \frac{1}{3}ct'^3\,dt' = \frac{1}{12}ct^4.
02

A motor starts from rest and accelerates with α(t)=2.4t rad/s2\alpha(t) = 2.4t\text{ rad/s}^2. How long does it take to rotate through 10.0 revolutions10.0\text{ revolutions}?

Answer

t≈5.40 st \approx 5.40\text{ s}.

Key steps:

  1. Convert displacement: Δθ=10.0×2π=20π rad≈62.83 rad\Delta\theta = 10.0 \times 2\pi = 20\pi\text{ rad} \approx 62.83\text{ rad}.
  2. Double integration gives Δθ=16(2.4)t3=0.4t3\Delta\theta = \frac{1}{6}(2.4)t^3 = 0.4t^3.
  3. Solve: t=(20π0.4)1/3=(50π)1/3≈5.40 st = \left(\frac{20\pi}{0.4}\right)^{1/3} = (50\pi)^{1/3} \approx 5.40\text{ s}.
03

A rotating platform has an initial angular velocity ω0=4.0 rad/s\omega_0 = 4.0\text{ rad/s} and an angular deceleration given by α(t)=−kt\alpha(t) = -kt, where k=0.50 rad/s3k = 0.50\text{ rad/s}^3. Find the total angular displacement until the platform momentarily comes to rest.

Answer

Δθ≈10.7 rad\Delta\theta \approx 10.7\text{ rad}.

Key steps:

  1. Find stopping time: ω(t)=ω0−12kt2=0  ⟹  tstop=2ω0k=8.00.50=4.0 s\omega(t) = \omega_0 - \frac{1}{2}kt^2 = 0 \implies t_{\text{stop}} = \sqrt{\frac{2\omega_0}{k}} = \sqrt{\frac{8.0}{0.50}} = 4.0\text{ s}.
  2. Integrate for displacement: Δθ=∫04(4.0−0.25t2) dt=[4.0t−0.253t3]04=16.0−5.33=10.67 rad\Delta\theta = \int_0^4 (4.0 - 0.25t^2)\,dt = [4.0t - \frac{0.25}{3}t^3]_0^4 = 16.0 - 5.33 = 10.67\text{ rad}.
Loading workspace…