Resources

An optical research apparatus uses a transmission diffraction grating to analyze light from a gas discharge tube. When illuminated normally with yellow light of wavelength λ=589 nm\lambda = 589\text{ nm}, the second-order principal maximum (m=2m = 2) is observed at a diffraction angle of θ=44.5∘\theta = 44.5^\circ. Working backwards from these spectral measurements, determine the line density of the grating, expressed as the number of lines per millimeter (NN).

Answer and steps

Final answer

5.95×102 lines/mm5.95\times 10^{2}\text{ lines/mm}

Steps

1. Identify the Governing Principle

When monochromatic light strikes a diffraction grating at normal incidence, constructive interference between light rays emerging from adjacent slits produces principal maxima according to the grating equation:

dsin⁡θ=mλd \sin\theta = m\lambda

where:

  • dd is the grating spacing (distance between adjacent slit centers),
  • θ\theta is the angle of diffraction relative to the normal,
  • mm is the spectral order of the maximum (m=0,1,2,…m = 0, 1, 2, \dots),
  • λ\lambda is the wavelength of the light.

2. Given Values and Unit Conversions

  • Wavelength: λ=589 nm=589×10−6 mm\lambda = 589\text{ nm} = 589 \times 10^{-6}\text{ mm}
  • Diffraction order: m=2m = 2
  • Diffraction angle: θ=44.5∘\theta = 44.5^\circ

3. Calculate the Grating Spacing (dd)

Rearrange the grating equation to solve for the slit spacing dd:

d=mλsin⁡θd = \frac{m\lambda}{\sin\theta}

Evaluate sin⁡(44.5∘)\sin(44.5^\circ):

sin⁡(44.5∘)≈0.7009\sin(44.5^\circ) \approx 0.7009

Substitute the values directly using millimeters to find dd in millimeters:

d=2⋅(589×10−6 mm)0.7009≈1.178×10−3 mm0.7009≈1.681×10−3 mmd = \frac{2 \cdot (589 \times 10^{-6}\text{ mm})}{0.7009} \approx \frac{1.178 \times 10^{-3}\text{ mm}}{0.7009} \approx 1.681 \times 10^{-3}\text{ mm}


4. Calculate the Line Density (NN)

The line density NN (the number of lines or rulings per unit length) is the reciprocal of the slit spacing dd:

N=1dN = \frac{1}{d}

N=11.681×10−3 mm≈595 lines/mmN = \frac{1}{1.681 \times 10^{-3}\text{ mm}} \approx 595\text{ lines/mm}

Expressed in scientific notation to three significant figures:

N=5.95×102 lines/mmN = 5.95 \times 10^{2}\text{ lines/mm}

Common Pitfall: Ensure the angle θ\theta is calculated in degrees, not radians, on your calculator. Additionally, converting λ\lambda to millimeters at the start avoids mistakes when calculating NN in lines/mm\text{lines/mm}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to account for the diffraction order (m = 2) and uses m = 1 in the grating equation, resulting in half the actual line density.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    dsin⁡θ=λ  ⟹  d=(589×10−6 mm)/sin⁡(44.5∘)≈8.403×10−4 mmd \sin\theta = \lambda \implies d = (589 \times 10^{-6}\text{ mm}) / \sin(44.5^\circ) \approx 8.403 \times 10^{-4}\text{ mm}

    Correct

    dsin⁡θ=mλ  ⟹  d=2×(589×10−6 mm)sin⁡(44.5∘)≈1.681×10−3 mmd \sin\theta = m\lambda \implies d = \frac{2 \times (589 \times 10^{-6}\text{ mm})}{\sin(44.5^\circ)} \approx 1.681 \times 10^{-3}\text{ mm}

    You used dsin⁡θ=λd \sin\theta = \lambda, which applies only to the first-order maximum (m=1m = 1). Because the problem specifies the second-order principal maximum, you need m=2m = 2 in the grating equation dsin⁡θ=mλd \sin\theta = m\lambda.

  2. Step 2

    N=1d=18.403×10−4 mm≈1190 lines/mmN = \frac{1}{d} = \frac{1}{8.403 \times 10^{-4}\text{ mm}} \approx 1190\text{ lines/mm}

    Correct

    N=1d=11.681×10−3 mm≈595 lines/mm=5.95×102 lines/mmN = \frac{1}{d} = \frac{1}{1.681 \times 10^{-3}\text{ mm}} \approx 595\text{ lines/mm} = 5.95 \times 10^2\text{ lines/mm}

    You correctly applied the reciprocal relationship N=1dN = \frac{1}{d}, but the value is twice the true line density because of the omitted order factor m=2m = 2 in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the wavelength from nanometers to millimeters.

You evaluated sin⁡(44.5∘)≈0.7009\sin(44.5^\circ) \approx 0.7009 accurately.

You recognized that line density NN is the reciprocal of slit spacing dd.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted spectral order $m$

You wrote dsin⁡θ=λd \sin\theta = \lambda as the base equation instead of dsin⁡θ=mλd \sin\theta = m\lambda with m=2m = 2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the diffraction grating formula as a fixed single-wavelength relation (dsin⁡θ=λd \sin\theta = \lambda) rather than accounting for the spectral order mm specified in multi-order interference problems.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check diffraction order
  • For a diffraction grating, the condition for constructive interference is dsin⁡θ=mλd \sin\theta = m\lambda, where m=0,±1,±2,…m = 0, \pm 1, \pm 2, \dots.

  • Always identify the integer order mm stated in the prompt before rearranging the grating equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute m=2m = 2, λ=589×10−6 mm\lambda = 589 \times 10^{-6}\text{ mm}, and θ=44.5∘\theta = 44.5^\circ into d=mλsin⁡θd = \frac{m\lambda}{\sin\theta}.

  2. Calculate the correct slit spacing: d=2×589×10−6 mmsin⁡(44.5∘)≈1.681×10−3 mmd = \frac{2 \times 589 \times 10^{-6}\text{ mm}}{\sin(44.5^\circ)} \approx 1.681 \times 10^{-3}\text{ mm}.

  3. Compute the line density using the reciprocal: N=1d=11.681×10−3 mm≈595 lines/mmN = \frac{1}{d} = \frac{1}{1.681 \times 10^{-3}\text{ mm}} \approx 595\text{ lines/mm}.

Final answer

5.95×102 lines/mm5.95 \times 10^{2}\text{ lines/mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the grating equation dsin⁡θ=mλd \sin\theta = m\lambda and highlight the order number mm whenever you read a diffraction grating problem.

  • Practice solving for line density when given higher orders (m=2,3m = 2, 3).

  • Complete the targeted flashcards and practice questions below to reinforce this habit.

OverviewACEpath Teacher's Diagnosis

02 The student confuses grating spacing d with line density N, reporting d in millimeters rather than taking the reciprocal.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    dsin⁡θ=mλ  ⟹  d=2×589×10−9 msin⁡(44.5∘)  ⟹  d=1.178×10−6 m0.7009≈1.68×10−6 md \sin\theta = m\lambda \implies d = \frac{2 \times 589 \times 10^{-9}\text{ m}}{\sin(44.5^\circ)} \implies d = \frac{1.178 \times 10^{-6}\text{ m}}{0.7009} \approx 1.68 \times 10^{-6}\text{ m}

  2. Step 2

    N=1.68×10−3 lines/mmN = 1.68 \times 10^{-3}\text{ lines/mm}

    Correct

    N=1d=11.681×10−3 mm≈5.95×102 lines/mmN = \frac{1}{d} = \frac{1}{1.681 \times 10^{-3}\text{ mm}} \approx 5.95 \times 10^{2}\text{ lines/mm}

    You converted dd from meters to millimeters (1.68×10−3 mm1.68 \times 10^{-3}\text{ mm}), but set NN equal to dd instead of taking the reciprocal N=1dN = \frac{1}{d}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and rearranged the grating equation dsin⁡θ=mλd \sin\theta = m\lambda.

You accurately evaluated sin⁡(44.5∘)\sin(44.5^\circ) and solved for the slit spacing dd in meters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
reciprocal_definition_omission

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused slit spacing dd (distance per line, with units of length) with line density NN (number of lines per unit length, with units of length−1\text{length}^{-1}), assigning the numerical value of dd in millimeters directly to NN.

REASONING PATH
Your ACEpath teacher’s suggested approach
Relationship between $d$ and $N$
  • N=1dN = \frac{1}{d} and d=1Nd = \frac{1}{N}

  • Check that your line density has units of lines/length\text{lines/length} by inverting the spacing between adjacent rulings.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the reciprocal relationship: N=1dN = \frac{1}{d}

  2. Calculate N=11.681×10−3 mm≈595 lines/mmN = \frac{1}{1.681 \times 10^{-3}\text{ mm}} \approx 595\text{ lines/mm}

Final answer

5.95×102 lines/mm5.95 \times 10^{2}\text{ lines/mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the formula N=1dN = \frac{1}{d} explicitly before converting units.

  • Check dimensional consistency: dd is a length (e.g., mm/line\text{mm/line}), while NN is a count per length (e.g., lines/mm\text{lines/mm}).

OverviewACEpath Teacher's Diagnosis

03 The student miscalculates the reciprocal by an incorrect unit conversion factor between meters and millimeters, giving 5.95 × 10⁵ lines/mm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    d=2×589×10−9 msin⁡(44.5∘)  ⟹  d=1.178×10−6 m0.7009≈1.681×10−6 md = \frac{2 \times 589 \times 10^{-9}\text{ m}}{\sin(44.5^\circ)} \implies d = \frac{1.178 \times 10^{-6}\text{ m}}{0.7009} \approx 1.681 \times 10^{-6}\text{ m}

  2. Step 2

    N=11.681×10−6=5.95×105 lines/mmN = \frac{1}{1.681 \times 10^{-6}} = 5.95 \times 10^5\text{ lines/mm}

    Correct

    N=1d=11.681×10−6 m≈5.95×105 lines/m=5.95×102 lines/mmN = \frac{1}{d} = \frac{1}{1.681 \times 10^{-6}\text{ m}} \approx 5.95 \times 10^5\text{ lines/m} = 5.95 \times 10^2\text{ lines/mm}

    Because your slit spacing dd was measured in meters, the reciprocal 1d\frac{1}{d} gives lines per meter, not lines per millimeter. Since 1 m=1000 mm1\text{ m} = 1000\text{ mm}, you need to divide by 10310^3 to express the density in lines/mm\text{lines/mm}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and rearranged the diffraction grating equation dsin⁡θ=mλd\sin\theta = m\lambda.

You accurately substituted the wavelength in meters and computed the slit spacing d=1.681×10−6 md = 1.681 \times 10^{-6}\text{ m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omission in reciprocal quantity

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the reciprocal of a length in meters as directly yielding lines per millimeter without accounting for the metric prefix in the denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reciprocal Unit Tracking
  • When a quantity is inverted, its units invert: 1m=m−1\frac{1}{\text{m}} = \text{m}^{-1}.

  • Always carry units through the reciprocal: 1d (m)=N (lines/m)\frac{1}{d\text{ (m)}} = N\text{ (lines/m)}, then multiply by 1 m1000 mm\frac{1\text{ m}}{1000\text{ mm}} to obtain lines/mm\text{lines/mm}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate NN in SI base units: N=11.681×10−6 m≈5.949×105 lines/mN = \frac{1}{1.681 \times 10^{-6}\text{ m}} \approx 5.949 \times 10^5\text{ lines/m}.

  2. Convert meters to millimeters: 5.949×105 lines/m×1 m103 mm≈5.95×102 lines/mm5.949 \times 10^5\text{ lines/m} \times \frac{1\text{ m}}{10^3\text{ mm}} \approx 5.95 \times 10^2\text{ lines/mm}.

Final answer

5.95×102 lines/mm5.95 \times 10^2\text{ lines/mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Track explicit units during reciprocal steps rather than attaching target units to the final numerical result.

  • Alternatively, convert dd or λ\lambda directly into millimeters before inverting to naturally arrive at lines/mm\text{lines/mm}.

Lock it in

Similar question

01

Light of wavelength λ=500 nm\lambda = 500\text{ nm} is incident normally on a diffraction grating. The third-order maximum (m=3m = 3) appears at an angle of θ=30.0∘\theta = 30.0^\circ. What is the line density of the grating in lines/mm\text{lines/mm}?

Answer

3.33×102 lines/mm3.33 \times 10^{2}\text{ lines/mm}. Key steps: d=mλsin⁡θ=3×(500×10−6 mm)sin⁡(30.0∘)=1.50×10−3 mm0.500=3.00×10−3 mmd = \frac{m\lambda}{\sin\theta} = \frac{3 \times (500 \times 10^{-6}\text{ mm})}{\sin(30.0^\circ)} = \frac{1.50 \times 10^{-3}\text{ mm}}{0.500} = 3.00 \times 10^{-3}\text{ mm}; then N=1d=13.00×10−3 mm≈333 lines/mmN = \frac{1}{d} = \frac{1}{3.00 \times 10^{-3}\text{ mm}} \approx 333\text{ lines/mm}.

02

A diffraction grating has a line density of N=400 lines/mmN = 400\text{ lines/mm}. When illuminated normally with monochromatic light, the second-order maximum (m=2m = 2) is observed at θ=28.5∘\theta = 28.5^\circ. Determine the wavelength λ\lambda of the light in nanometers.

Answer

596 nm596\text{ nm}. Key steps: Grating spacing d=1N=1400 mm−1=2.50×10−3 mm=2500 nmd = \frac{1}{N} = \frac{1}{400\text{ mm}^{-1}} = 2.50 \times 10^{-3}\text{ mm} = 2500\text{ nm}. Using dsin⁡θ=mλd \sin\theta = m\lambda, λ=dsin⁡θm=2500 nm×sin⁡(28.5∘)2≈2500×0.47722≈596 nm\lambda = \frac{d \sin\theta}{m} = \frac{2500\text{ nm} \times \sin(28.5^\circ)}{2} \approx \frac{2500 \times 0.4772}{2} \approx 596\text{ nm}.

03

A diffraction grating is ruled with 600 lines/mm600\text{ lines/mm}. A laser beam with wavelength λ=633 nm\lambda = 633\text{ nm} strikes the grating at normal incidence. Determine the highest spectral order mm that can theoretically be observed on a distant screen.

Answer

m=2m = 2. Key steps: Grating spacing d=1600 mm−1=10−3 m600≈1.667×10−6 m=1667 nmd = \frac{1}{600\text{ mm}^{-1}} = \frac{10^{-3}\text{ m}}{600} \approx 1.667 \times 10^{-6}\text{ m} = 1667\text{ nm}. The maximum diffraction angle is θ<90∘\theta < 90^\circ, so sin⁡θ≤1\sin\theta \le 1. Thus m≤dλ=1667 nm633 nm≈2.63m \le \frac{d}{\lambda} = \frac{1667\text{ nm}}{633\text{ nm}} \approx 2.63. Since mm must be an integer, the highest observable order is m=2m = 2.

Loading workspace…