Resources

A stunt vehicle is launched from the top of an inclined ramp of height h=15.0 mh = 15.0\text{ m} above horizontal ground. The ramp is inclined at θ=25.0∘\theta = 25.0^\circ above the horizontal. Along the ramp, a tilted coordinate system (x1,y1)(x_1, y_1) is chosen with +x1+x_1 directed down the ramp from the release point (x1=0x_1 = 0) and +y1+y_1 normal to the ramp upward. The vehicle starts from rest and accelerates down the frictionless ramp over a distance of L=35.5 mL = 35.5\text{ m} before launching off the edge. At the launch point, coordinates are switched to a global Cartesian system (x2,y2)(x_2, y_2) with the origin at the launch point, +x2+x_2 pointing horizontally forward, and +y2+y_2 vertically upward. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate: (a) the velocity vector of the car at the launch lip in the ramp coordinate system, (v1x,v1y)(v_{1x}, v_{1y}), (b) the velocity vector at launch converted into the global system, (v2x,v2y)(v_{2x}, v_{2y}), and (c) the maximum vertical height y2,maxy_{2,\text{max}} reached by the vehicle above the launch level during the airborne phase.

Answer and steps

Final answer

(a) (v1x,v1y)=(17.1 m/s,0 m/s)(v_{1x}, v_{1y}) = (17.1\text{ m/s}, 0\text{ m/s}), (b) (v2x,v2y)=(15.5 m/s,−7.24 m/s)(v_{2x}, v_{2y}) = (15.5\text{ m/s}, -7.24\text{ m/s}), (c) y2,max=0 my_{2,\text{max}} = 0\text{ m} (the launch velocity is directed downward below horizontal, so the launch point is the maximum height during flight)

Steps

Part (a): Velocity in the Ramp Coordinate System (x1,y1)(x_1, y_1)

  1. Identify the acceleration along the ramp: In the tilted coordinate system (x1,y1)(x_1, y_1), the +x1+x_1-axis points along the incline downwards, and the +y1+y_1-axis is perpendicular to the ramp upwards. The only force acting parallel to the frictionless ramp is the component of gravity directed down the slope: a1x=gsin⁡θa_{1x} = g \sin\theta a1x=(9.80 m/s2)sin⁡(25.0∘)≈4.142 m/s2a_{1x} = (9.80\text{ m/s}^2)\sin(25.0^\circ) \approx 4.142\text{ m/s}^2 Because the vehicle remains on the surface of the ramp, the acceleration perpendicular to the ramp is zero: a1y=0 m/s2a_{1y} = 0\text{ m/s}^2
  2. Calculate the final speed using kinematics: The vehicle starts from rest (v0=0v_0 = 0) and travels a distance L=35.5 mL = 35.5\text{ m}. Using the kinematic relation v2=v02+2aΔxv^2 = v_0^2 + 2a\Delta x: v1x=2a1xL=2(4.142 m/s2)(35.5 m)≈17.1 m/sv_{1x} = \sqrt{2 a_{1x} L} = \sqrt{2(4.142\text{ m/s}^2)(35.5\text{ m})} \approx 17.1\text{ m/s}
  3. Form the velocity vector: Since motion is entirely along the slope: (v1x,v1y)=(17.1 m/s,0 m/s)(v_{1x}, v_{1y}) = (17.1\text{ m/s}, 0\text{ m/s})

Part (b): Velocity in the Global Horizontal-Vertical Coordinate System (x2,y2)(x_2, y_2)

  1. Determine the direction relative to global axes: In the global frame (x2,y2)(x_2, y_2), +x2+x_2 points horizontally forward and +y2+y_2 points vertically upward. Because the car slides down a ramp inclined at θ=25.0∘\theta = 25.0^\circ above the horizontal, its velocity vector at the lip points at an angle of 25.0∘25.0^\circ below the +x2+x_2-axis.
  2. Resolve the velocity into horizontal and vertical components:

    • Horizontal component: v2x=v1cos⁡θ=(17.15 m/s)cos⁡(25.0∘)≈15.5 m/sv_{2x} = v_1 \cos\theta = (17.15\text{ m/s})\cos(25.0^\circ) \approx 15.5\text{ m/s}
    • Vertical component (directed downward, hence negative): v2y=−v1sin⁡θ=−(17.15 m/s)sin⁡(25.0∘)≈−7.24 m/sv_{2y} = -v_1 \sin\theta = -(17.15\text{ m/s})\sin(25.0^\circ) \approx -7.24\text{ m/s}
  3. Form the global velocity vector: (v2x,v2y)=(15.5 m/s,−7.24 m/s)(v_{2x}, v_{2y}) = (15.5\text{ m/s}, -7.24\text{ m/s})

Part (c): Maximum Height Above the Launch Level

  1. Analyze the vertical motion during the airborne phase: In free fall, the vertical position relative to the launch lip (y2=0y_2 = 0) is given by: y2(t)=v2yt−12gt2y_2(t) = v_{2y} t - \frac{1}{2}g t^2
  2. Evaluate the trajectory: The initial vertical velocity is downward: v2y=−7.24 m/s<0v_{2y} = -7.24\text{ m/s} < 0 Because both v2yv_{2y} and the acceleration due to gravity −g-g are negative, the vertical velocity is strictly negative for all t>0t > 0. The vehicle immediately descends after leaving the lip and never rises above its launch height.
  3. Conclusion: The maximum vertical height above the launch level is at the moment of launch: y2,max=0 my_{2,\text{max}} = 0\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes the launch is upward at 25.0° instead of downward along the decline, resulting in a positive vertical velocity component and an incorrect non-zero maximum height.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    a1=gsin⁡(25.0∘)=9.80⋅0.4226=4.14 m/s2  ⟹  v1x=2⋅4.14⋅35.5=17.1 m/s  ⟹  v1y=0 m/s  ⟹  (v1x,v1y)=(17.1 m/s,0 m/s)a_1 = g\sin(25.0^\circ) = 9.80 \cdot 0.4226 = 4.14\text{ m/s}^2 \implies v_{1x} = \sqrt{2 \cdot 4.14 \cdot 35.5} = 17.1\text{ m/s} \implies v_{1y} = 0\text{ m/s} \implies (v_{1x}, v_{1y}) = (17.1\text{ m/s}, 0\text{ m/s})

  2. Step 2

    v2x=17.1⋅cos⁡(25.0∘)=15.5 m/s  ⟹  v2y=17.1⋅sin⁡(25.0∘)=7.25 m/s  ⟹  (v2x,v2y)=(15.5 m/s,7.25 m/s)v_{2x} = 17.1 \cdot \cos(25.0^\circ) = 15.5\text{ m/s} \implies v_{2y} = 17.1 \cdot \sin(25.0^\circ) = 7.25\text{ m/s} \implies (v_{2x}, v_{2y}) = (15.5\text{ m/s}, 7.25\text{ m/s})

    Correct

    v2x=v1cos⁡(25.0∘)≈15.5 m/s  ⟹  v2y=−v1sin⁡(25.0∘)≈−7.24 m/s  ⟹  (v2x,v2y)=(15.5 m/s,−7.24 m/s)v_{2x} = v_1\cos(25.0^\circ) \approx 15.5\text{ m/s} \implies v_{2y} = -v_1\sin(25.0^\circ) \approx -7.24\text{ m/s} \implies (v_{2x}, v_{2y}) = (15.5\text{ m/s}, -7.24\text{ m/s})

    Because the car slides down the ramp toward the lip, its velocity vector points 25.0∘25.0^\circ below the horizontal +x2+x_2-axis. Since +y2+y_2 is defined as vertically upward, the vertical velocity component must be negative: v2y=−17.1sin⁡(25.0∘)≈−7.24 m/sv_{2y} = -17.1\sin(25.0^\circ) \approx -7.24\text{ m/s}.

  3. Step 3

    y2,max=v2y22g=7.2522⋅9.80=2.68 my_{2,\text{max}} = \frac{v_{2y}^2}{2g} = \frac{7.25^2}{2 \cdot 9.80} = 2.68\text{ m}

    Correct

    y2,max=0 my_{2,\text{max}} = 0\text{ m}

    Because the initial vertical velocity is downward (v2y<0v_{2y} < 0) and gravity also pulls downward, the vehicle immediately descends upon leaving the lip. It never rises above the launch level, so the maximum height relative to the launch lip is 0 m0\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the downhill acceleration using the component of gravity parallel to the incline.

You correctly applied kinematics to obtain the vehicle's speed at the bottom of the ramp.

You correctly resolved the horizontal component of the velocity vector in the global Cartesian frame.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention in coordinate transformation

You treated the angle as directed above the horizontal rather than below the horizontal when resolving into global Cartesian components.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating standard upward projectile launch angles with a downward slope launch, forgetting to check the physical direction of motion relative to the chosen positive coordinate axes.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Vector Directions Against Axes
  • When transforming a vector between coordinate systems, always draw the vector and inspect whether each component points along the positive or negative direction of the target axes.

  • Before writing trigonometric components, sketch the velocity arrow at the lip: it points forward and down, so v2x>0v_{2x} > 0 and v2y<0v_{2y} < 0.

Physically Test Airborne Extrema
  • A projectile reaches a peak higher than its launch point if and only if its initial vertical velocity is positive (vy>0v_y > 0).

  • If v0y≤0v_{0y} \le 0, the projectile descends immediately; do not use h=vy22gh = \frac{v_y^2}{2g}, as the maximum height above the release level is simply 0 m0\text{ m}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Notice that the ramp descends toward the launch lip, so the velocity vector points at an angle of 25.0∘25.0^\circ below the horizontal +x2+x_2-axis.

  2. Compute the vertical component: v2y=−v1sin⁡(25.0∘)=−17.15sin⁡(25.0∘)≈−7.24 m/sv_{2y} = -v_1 \sin(25.0^\circ) = -17.15 \sin(25.0^\circ) \approx -7.24\text{ m/s}.

  3. Combine with the horizontal component: (v2x,v2y)=(15.5 m/s,−7.24 m/s)(v_{2x}, v_{2y}) = (15.5\text{ m/s}, -7.24\text{ m/s}).

  4. For Part (c), note that since v2y<0v_{2y} < 0 and gravity accelerates downward, the vehicle only loses altitude after launch: y2(t)<0y_{2}(t) < 0 for all t>0t > 0.

  5. Conclude that the maximum vertical height achieved above launch level is y2,max=0 my_{2,\text{max}} = 0\text{ m}.

Final answer

(a) (17.1 m/s,0 m/s)(17.1\text{ m/s}, 0\text{ m/s}), (b) (15.5 m/s,−7.24 m/s)(15.5\text{ m/s}, -7.24\text{ m/s}), (c) 0 m0\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch the velocity vector at the transition point between two coordinate frames to confirm the signs of both components.

  • Check whether the initial vertical velocity is directed upward before applying the vertex formula h=vy22gh = \frac{v_y^2}{2g}.

OverviewACEpath Teacher's Diagnosis

02 The student uses cos(θ) instead of sin(θ) for the acceleration down the incline, leading to an incorrect launch speed throughout all parts.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    a1=gcos⁡(25.0∘)=8.88 m/s2a_1 = g \cos(25.0^\circ) = 8.88\text{ m/s}^2

    Correct

    a1x=gsin⁡(25.0∘)≈4.14 m/s2a_{1x} = g \sin(25.0^\circ) \approx 4.14\text{ m/s}^2

    The component of gravitational acceleration acting down an incline tilted at angle θ\theta above the horizontal is a∥=gsin⁡θa_{\parallel} = g \sin\theta, not gcos⁡θg \cos\theta.

  2. Step 2

    v1x=2⋅8.88⋅35.5=25.1 m/s  ⟹  v1y=0 m/s  ⟹  (v1x,v1y)=(25.1 m/s,0 m/s)v_{1x} = \sqrt{2 \cdot 8.88 \cdot 35.5} = 25.1\text{ m/s} \implies v_{1y} = 0\text{ m/s} \implies (v_{1x}, v_{1y}) = (25.1\text{ m/s}, 0\text{ m/s})

    Correct

    v1x=2(4.142 m/s2)(35.5 m)≈17.1 m/s  ⟹  (v1x,v1y)=(17.1 m/s,0 m/s)v_{1x} = \sqrt{2(4.142\text{ m/s}^2)(35.5\text{ m})} \approx 17.1\text{ m/s} \implies (v_{1x}, v_{1y}) = (17.1\text{ m/s}, 0\text{ m/s})

    Your kinematic formula and vector setup in the ramp coordinate system were entirely correct, but the speed was overstated due to the incorrect acceleration from Step 1.

  3. Step 3

    v2x=25.1⋅cos⁡(25.0∘)=22.7 m/s  ⟹  v2y=−25.1⋅sin⁡(25.0∘)=−10.6 m/s  ⟹  (v2x,v2y)=(22.7 m/s,−10.6 m/s)v_{2x} = 25.1 \cdot \cos(25.0^\circ) = 22.7\text{ m/s} \implies v_{2y} = -25.1 \cdot \sin(25.0^\circ) = -10.6\text{ m/s} \implies (v_{2x}, v_{2y}) = (22.7\text{ m/s}, -10.6\text{ m/s})

    Correct

    v2x=17.15cos⁡(25.0∘)≈15.5 m/s  ⟹  v2y=−17.15sin⁡(25.0∘)≈−7.24 m/s  ⟹  (v2x,v2y)=(15.5 m/s,−7.24 m/s)v_{2x} = 17.15 \cos(25.0^\circ) \approx 15.5\text{ m/s} \implies v_{2y} = -17.15 \sin(25.0^\circ) \approx -7.24\text{ m/s} \implies (v_{2x}, v_{2y}) = (15.5\text{ m/s}, -7.24\text{ m/s})

    You correctly decomposed the launch velocity into horizontal forward (+x2+x_2) and downward vertical (−y2-y_2) components, but the numerical values carry over the error from Step 1.

  4. Step 4

    Since v2y is negative, the vehicle moves downward immediately after launch.  ⟹  y2,max=0 m\text{Since } v_{2y} \text{ is negative, the vehicle moves downward immediately after launch.} \implies y_{2,\text{max}} = 0\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the kinematic formula v2=v02+2aΔxv^2 = v_0^2 + 2a\Delta x to relate acceleration and distance.

You accurately identified that motion in the ramp frame has no perpendicular component (v1y=0 m/sv_{1y} = 0\text{ m/s}).

You chose the correct trigonometric projections and negative sign for the global vertical velocity v2yv_{2y}.

You correctly concluded that a negative initial vertical velocity means the peak airborne height occurs at the launch point (y2,max=0 my_{2,\text{max}} = 0\text{ m}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Selection on Inclined Plane

You resolved the acceleration along the slope using cos⁡(25.0∘)\cos(25.0^\circ) instead of sin⁡(25.0∘)\sin(25.0^\circ).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When a ramp is inclined at angle θ\theta to the horizontal, the angle between the downward vertical gravity vector and the ramp normal is θ\theta. Consequently, the perpendicular component is adjacent to that angle (gcos⁡θg\cos\theta), and the parallel component pulling the vehicle down the slope is opposite (gsin⁡θg\sin\theta).

REASONING PATH
Your ACEpath teacher’s suggested approach
Component Decomposition on an Incline
  • On an incline at angle θ\theta to the horizontal, the component of gravity parallel to the incline is gsin⁡θg\sin\theta, and the component perpendicular to the incline is gcos⁡θg\cos\theta.

  • Always draw the right triangle formed by the vertical gravity vector g⃗\vec{g} and its perpendicular and parallel projections to confirm which side is opposite θ\theta.

Extreme Angle Limiting Check
  • As the slope angle θ→0∘\theta \to 0^\circ (flat ground), the acceleration along the surface must vanish: gsin⁡(0∘)=0g\sin(0^\circ) = 0.

  • Test θ=0∘\theta = 0^\circ: if your parallel formula yields gcos⁡(0∘)=gg\cos(0^\circ) = g, you have inadvertently swapped the sine and cosine components.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. a1x=gsin⁡(25.0∘)=(9.80 m/s2)(0.4226)≈4.142 m/s2a_{1x} = g \sin(25.0^\circ) = (9.80\text{ m/s}^2)(0.4226) \approx 4.142\text{ m/s}^2

  2. v1x=2a1xL=2(4.142 m/s2)(35.5 m)≈17.15 m/sv_{1x} = \sqrt{2 a_{1x} L} = \sqrt{2(4.142\text{ m/s}^2)(35.5\text{ m})} \approx 17.15\text{ m/s}, so (v1x,v1y)=(17.1 m/s,0 m/s)(v_{1x}, v_{1y}) = (17.1\text{ m/s}, 0\text{ m/s})

  3. v2x=v1xcos⁡(25.0∘)=(17.15 m/s)cos⁡(25.0∘)≈15.5 m/sv_{2x} = v_{1x} \cos(25.0^\circ) = (17.15\text{ m/s})\cos(25.0^\circ) \approx 15.5\text{ m/s}

  4. v2y=−v1xsin⁡(25.0∘)=−(17.15 m/s)sin⁡(25.0∘)≈−7.24 m/sv_{2y} = -v_{1x} \sin(25.0^\circ) = -(17.15\text{ m/s})\sin(25.0^\circ) \approx -7.24\text{ m/s}, so (v2x,v2y)=(15.5 m/s,−7.24 m/s)(v_{2x}, v_{2y}) = (15.5\text{ m/s}, -7.24\text{ m/s})

  5. y2,max=0 my_{2,\text{max}} = 0\text{ m} because v2y<0v_{2y} < 0 and a2y=−g<0a_{2y} = -g < 0 for all t>0t > 0.

Final answer

(a) (17.1 m/s,0 m/s)(17.1\text{ m/s}, 0\text{ m/s}), (b) (15.5 m/s,−7.24 m/s)(15.5\text{ m/s}, -7.24\text{ m/s}), (c) 0 m0\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometry of inclined-plane force triangles by practicing with the flashcards below.

  • Solve the three targeted follow-up exercises to master coordinate conversions and gravity projections.

OverviewACEpath Teacher's Diagnosis

03 The student blindly applies the kinematic apex height formula to the vertical velocity component despite it being directed downwards.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    a1=gsin⁡(25.0∘)=4.14 m/s2  ⟹  v1x=2⋅4.14⋅35.5=17.1 m/s  ⟹  v1y=0 m/s  ⟹  (v1x,v1y)=(17.1 m/s,0 m/s)a_1 = g \sin(25.0^\circ) = 4.14\text{ m/s}^2 \implies v_{1x} = \sqrt{2 \cdot 4.14 \cdot 35.5} = 17.1\text{ m/s} \implies v_{1y} = 0\text{ m/s} \implies (v_{1x}, v_{1y}) = (17.1\text{ m/s}, 0\text{ m/s})

  2. Step 2

    v2x=17.1⋅cos⁡(25.0∘)=15.5 m/s  ⟹  v2y=−17.1⋅sin⁡(25.0∘)=−7.25 m/s  ⟹  (v2x,v2y)=(15.5 m/s,−7.25 m/s)v_{2x} = 17.1 \cdot \cos(25.0^\circ) = 15.5\text{ m/s} \implies v_{2y} = -17.1 \cdot \sin(25.0^\circ) = -7.25\text{ m/s} \implies (v_{2x}, v_{2y}) = (15.5\text{ m/s}, -7.25\text{ m/s})

  3. Step 3

    y2,max=v2y22g=(−7.25)22⋅9.80=2.68 my_{2,\text{max}} = \frac{v_{2y}^2}{2g} = \frac{(-7.25)^2}{2 \cdot 9.80} = 2.68\text{ m}

    Correct

    y2,max=0 my_{2,\text{max}} = 0\text{ m}

    The formula h=v0y22gh = \frac{v_{0y}^2}{2g} only applies when an object is launched upward (v0y>0v_{0y} > 0) and decelerates to zero vertical speed at its apex. Here, the vehicle launches downward (v2y=−7.25 m/s<0v_{2y} = -7.25\text{ m/s} < 0), meaning its vertical position strictly decreases for t>0t > 0, so its maximum height during flight is 0 m0\text{ m} at the launch point.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved the gravitational acceleration parallel to the ramp surface.

You accurately calculated the launch speed using constant-acceleration kinematics.

You converted the ramp velocity vector into the global horizontal and vertical coordinate frame with correct signs.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematic apex formula misapplication

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You applied the projectile apex height formula vy22g\frac{v_y^2}{2g} as an algebraic routine without checking the physical condition required for an apex to exist (v0y>0v_{0y} > 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Initial Vertical Velocity
  • A projectile reaches an apex higher than its launch level only if v0y>0v_{0y} > 0.

  • Check the sign of v0yv_{0y} before computing an apex height; if v0y≤0v_{0y} \le 0, the launch level is already the maximum height.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Inspect the initial vertical velocity: v2y=−7.25 m/s<0v_{2y} = -7.25\text{ m/s} < 0.

  2. Write the kinematic vertical position equation: y2(t)=v2yt−12gt2y_2(t) = v_{2y}t - \frac{1}{2}gt^2.

  3. Note that both terms are strictly non-positive for all t≥0t \ge 0, so y2(t)≤0y_2(t) \le 0.

  4. Conclude that the highest vertical position above launch occurs at t=0t = 0.

Final answer

y2,max=0 my_{2,\text{max}} = 0\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch the initial velocity vector at launch to visualize whether the object rises or falls immediately upon release.

  • Check the sign of v0yv_{0y} before applying standard peak-height formulas.

Lock it in

Similar question

01

A sled slides off the end of an icy roof that slopes downward at 30.0∘30.0^\circ below the horizontal. Its speed at the edge of the roof is 12.0 m/s12.0\text{ m/s}. Choosing a coordinate system with +x+x horizontal in the direction of motion and +y+y vertically upward, find: (a) the velocity vector (vx,vy)(v_x, v_y) at the moment of launch, and (b) the maximum vertical height above the roof edge reached during flight.

Answer

(a) (vx,vy)=(12.0cos⁡30.0∘,−12.0sin⁡30.0∘)=(10.4 m/s,−6.00 m/s)(v_x, v_y) = (12.0\cos 30.0^\circ, -12.0\sin 30.0^\circ) = (10.4\text{ m/s}, -6.00\text{ m/s}). (b) Since vy=−6.00 m/s<0v_y = -6.00\text{ m/s} < 0, the sled descends immediately; the maximum height above the launch edge is 0 m0\text{ m}.

02

A ball rolls down a 20.0∘20.0^\circ incline of length 5.00 m5.00\text{ m} from rest without friction (g=9.80 m/s2g = 9.80\text{ m/s}^2). At the bottom, it becomes airborne. Find the horizontal and vertical velocity components at launch in a global frame where +x+x is forward and +y+y is upward.

Answer

Along the incline, a=gsin⁡(20.0∘)≈3.352 m/s2a = g\sin(20.0^\circ) \approx 3.352\text{ m/s}^2. Final speed along the ramp is v=2aL=2(3.352)(5.00)≈5.79 m/sv = \sqrt{2aL} = \sqrt{2(3.352)(5.00)} \approx 5.79\text{ m/s}. In the global frame, the velocity points 20.0∘20.0^\circ below horizontal: vx=5.79cos⁡(20.0∘)≈5.44 m/sv_x = 5.79\cos(20.0^\circ) \approx 5.44\text{ m/s} and vy=−5.79sin⁡(20.0∘)≈−1.98 m/sv_y = -5.79\sin(20.0^\circ) \approx -1.98\text{ m/s}.

03

A stunt car accelerates down a 15.0∘15.0^\circ decline and reaches 24.0 m/s24.0\text{ m/s} at the edge of a cliff. A ramp technician proposes adding a small upward kicker at the lip that turns the velocity vector by 25.0∘25.0^\circ upward without changing the car's speed. (a) What is the launch velocity vector (vx,vy)(v_x, v_y) with the kicker? (b) What is the maximum height reached above the cliff edge with the kicker? (Take g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

(a) The original velocity angle was −15.0∘-15.0^\circ. Turning it upward by 25.0∘25.0^\circ gives a net launch angle of θ=−15.0∘+25.0∘=+10.0∘\theta = -15.0^\circ + 25.0^\circ = +10.0^\circ above horizontal. Thus, vx=24.0cos⁡(10.0∘)≈23.6 m/sv_x = 24.0\cos(10.0^\circ) \approx 23.6\text{ m/s} and vy=24.0sin⁡(10.0∘)≈4.17 m/sv_y = 24.0\sin(10.0^\circ) \approx 4.17\text{ m/s}, so (vx,vy)=(23.6 m/s,4.17 m/s)(v_x, v_y) = (23.6\text{ m/s}, 4.17\text{ m/s}). (b) Since vy>0v_y > 0, the peak height is ymax=vy22g=(4.17)22(9.80)≈0.887 my_\text{max} = \frac{v_y^2}{2g} = \frac{(4.17)^2}{2(9.80)} \approx 0.887\text{ m}.

Loading workspace…