Resources

A standing wave is established on a string of length L=1.80 mL = 1.80\text{ m} fixed at both ends, which is under a tension of T=72.0 NT = 72.0\text{ N}. A composite spatial waveform graph reveals three identical antinodal loops spanning the length between x=0x = 0 and x=1.80 mx = 1.80\text{ m}, with nodes located at x=0 mx = 0\text{ m}, 0.600 m0.600\text{ m}, 1.20 m1.20\text{ m}, and 1.80 m1.80\text{ m}, and maximum antinodal displacement Amax=0.0500 mA_{\text{max}} = 0.0500\text{ m}. A high-speed strobe timer measures the time interval for a particle at an antinode to travel from its maximum positive displacement +Amax+A_{\text{max}} to its maximum negative displacement −Amax-A_{\text{max}} as Δt=1.25×10−2 s\Delta t = 1.25 \times 10^{-2}\text{ s}. Calculate: (a) the wavelength λ\lambda of the interfering traveling waves, (b) the wave speed vv, and (c) the linear mass density μ\mu of the string.

Answer and steps

Final answer

(a) λ=1.20 m\lambda = 1.20\text{ m}, (b) v=48.0 m/sv = 48.0\text{ m/s}, (c) μ=0.0313 kg/m\mu = 0.0313\text{ kg/m}

Steps

Part (a): Determine the Wavelength λ\lambda

A standing wave on a string fixed at both ends consists of alternating nodes (points of zero displacement) and antinodes (points of maximum displacement).

The distance between any two adjacent nodes represents half of a full wavelength: λ2=xi+1−xi\frac{\lambda}{2} = x_{i+1} - x_i

From the given node positions, the distance between adjacent nodes is: λ2=0.600 m−0 m=0.600 m\frac{\lambda}{2} = 0.600\text{ m} - 0\text{ m} = 0.600\text{ m}

Solving for the wavelength λ\lambda: λ=2⋅0.600 m=1.20 m\lambda = 2 \cdot 0.600\text{ m} = 1.20\text{ m}

(Alternative check): With n=3n = 3 antinodal loops spanning a length L=1.80 mL = 1.80\text{ m}: L=nλ2  ⟹  1.80 m=3(λ2)  ⟹  λ=2⋅1.80 m3=1.20 mL = n\frac{\lambda}{2} \implies 1.80\text{ m} = 3\left(\frac{\lambda}{2}\right) \implies \lambda = \frac{2 \cdot 1.80\text{ m}}{3} = 1.20\text{ m}


Part (b): Determine the Wave Speed vv

A particle at an antinode executes simple harmonic motion between +Amax+A_{\text{max}} and −Amax-A_{\text{max}}. Moving from extreme positive displacement to extreme negative displacement constitutes half of a full oscillation cycle: Δt=Tperiod2\Delta t = \frac{T_{\text{period}}}{2}

Therefore, the period of oscillation TperiodT_{\text{period}} is: Tperiod=2Δt=2(1.25×10−2 s)=2.50×10−2 sT_{\text{period}} = 2 \Delta t = 2(1.25 \times 10^{-2}\text{ s}) = 2.50 \times 10^{-2}\text{ s}

The frequency ff of the wave is the reciprocal of the period: f=1Tperiod=12.50×10−2 s=40.0 Hzf = \frac{1}{T_{\text{period}}} = \frac{1}{2.50 \times 10^{-2}\text{ s}} = 40.0\text{ Hz}

Now, compute the wave speed vv using the wave speed equation: v=fλ=(40.0 Hz)(1.20 m)=48.0 m/sv = f \lambda = (40.0\text{ Hz})(1.20\text{ m}) = 48.0\text{ m/s}

Common Pitfall: Do not confuse the time interval Δt\Delta t between opposite displacement peaks with the full wave period TperiodT_{\text{period}}. It takes a full cycle to return to the original position moving in the original direction, so Tperiod=2ΔtT_{\text{period}} = 2\Delta t.


Part (c): Determine the Linear Mass Density μ\mu

The speed of a transverse wave on a stretched string under tension TT is governed by: v=Tμv = \sqrt{\frac{T}{\mu}}

Squaring both sides and solving for the linear mass density μ\mu: μ=Tv2\mu = \frac{T}{v^2}

Substitute the given tension T=72.0 NT = 72.0\text{ N} and the calculated speed v=48.0 m/sv = 48.0\text{ m/s}: μ=72.0 N(48.0 m/s)2=72.02304 kg/m=0.03125 kg/m≈0.0313 kg/m\mu = \frac{72.0\text{ N}}{(48.0\text{ m/s})^2} = \frac{72.0}{2304}\text{ kg/m} = 0.03125\text{ kg/m} \approx 0.0313\text{ kg/m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student mistakes the given time interval from positive to negative amplitude as a full period instead of half a period, halving the calculated frequency and wave speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    L=3(λ2)  ⟹  λ=2(1.80)3=1.20 mL = 3\left(\frac{\lambda}{2}\right) \implies \lambda = \frac{2(1.80)}{3} = 1.20\text{ m}

  2. Step 2

    Tperiod=Δt=1.25×10−2 s  ⟹  f=1Tperiod=80.0 Hz  ⟹  v=λf=(1.20)(80.0)=96.0 m/sT_{\text{period}} = \Delta t = 1.25 \times 10^{-2}\text{ s} \implies f = \frac{1}{T_{\text{period}}} = 80.0\text{ Hz} \implies v = \lambda f = (1.20)(80.0) = 96.0\text{ m/s}

    Correct

    Tperiod=2Δt=2(1.25×10−2 s)=2.50×10−2 s  ⟹  f=40.0 Hz  ⟹  v=λf=(1.20 m)(40.0 Hz)=48.0 m/sT_{\text{period}} = 2\Delta t = 2(1.25 \times 10^{-2}\text{ s}) = 2.50 \times 10^{-2}\text{ s} \implies f = 40.0\text{ Hz} \implies v = \lambda f = (1.20\text{ m})(40.0\text{ Hz}) = 48.0\text{ m/s}

    A particle traveling from maximum positive displacement +Amax+A_{\text{max}} to maximum negative displacement −Amax-A_{\text{max}} completes only half an oscillation cycle. The full period is T=2Δt=2.50×10−2 sT = 2\Delta t = 2.50 \times 10^{-2}\text{ s}, which yields f=40.0 Hzf = 40.0\text{ Hz} and v=48.0 m/sv = 48.0\text{ m/s}.

  3. Step 3

    v=Tμ  ⟹  μ=Tv2=72.0(96.0)2=7.81×10−3 kg/mv = \sqrt{\frac{T}{\mu}} \implies \mu = \frac{T}{v^2} = \frac{72.0}{(96.0)^2} = 7.81 \times 10^{-3}\text{ kg/m}

    Correct

    μ=Tv2=72.0 N(48.0 m/s)2=0.0313 kg/m\mu = \frac{T}{v^2} = \frac{72.0\text{ N}}{(48.0\text{ m/s})^2} = 0.0313\text{ kg/m}

    Your algebraic formula for linear mass density is correct, but your numerical answer inherits the doubled wave speed from step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the string length to the number of half-wavelength loops.

You correctly used the transverse wave speed formula μ=Tv2\mu = \frac{T}{v^2} to solve for linear density.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Half-period vs full-period confusion

You equated the time interval between opposite extremes to the full period TperiodT_{\text{period}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the time for half an oscillation cycle (+A+A to −A-A) with a full oscillation cycle (+A+A to −A-A and back to +A+A) doubles the frequency and wave speed.

REASONING PATH
Your ACEpath teacher’s suggested approach
Full Cycle vs Half Cycle
  • One complete period TT requires a particle to return to its initial displacement and velocity direction: t(+A→−A)=T2t(+A \to -A) = \frac{T}{2}.

  • Always multiply the transit time between opposite amplitude extremes by 22 before computing period or frequency.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the full period to twice the transit time between opposite displacement extremes: T=2Δt=2(1.25×10−2 s)=2.50×10−2 sT = 2\Delta t = 2(1.25 \times 10^{-2}\text{ s}) = 2.50 \times 10^{-2}\text{ s}.

  2. Find frequency: f=1T=12.50×10−2 s=40.0 Hzf = \frac{1}{T} = \frac{1}{2.50 \times 10^{-2}\text{ s}} = 40.0\text{ Hz}.

  3. Calculate wave speed: v=λf=(1.20 m)(40.0 Hz)=48.0 m/sv = \lambda f = (1.20\text{ m})(40.0\text{ Hz}) = 48.0\text{ m/s}.

  4. Recalculate linear mass density: μ=Ttensionv2=72.0 N(48.0 m/s)2=0.03125 kg/m≈0.0313 kg/m\mu = \frac{T_{\text{tension}}}{v^2} = \frac{72.0\text{ N}}{(48.0\text{ m/s})^2} = 0.03125\text{ kg/m} \approx 0.0313\text{ kg/m}.

Final answer

(a) λ=1.20 m\lambda = 1.20\text{ m}, (b) v=48.0 m/sv = 48.0\text{ m/s}, (c) μ=0.0313 kg/m\mu = 0.0313\text{ kg/m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch one full sinusoidal displacement vs. time cycle to visually trace where +Amax+A_{\text{max}} and −Amax-A_{\text{max}} occur.

  • Practice distinguishing between half-period cues (crest-to-trough, +A+A to −A-A) and full-period cues (crest-to-crest, full cycle).

  • Recalculate downstream quantities whenever an early kinematic value is adjusted.

OverviewACEpath Teacher's Diagnosis

02 The student mistakes each antinodal loop for a full wavelength instead of a half wavelength, resulting in λ = 0.600 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    L=3λ  ⟹  λ=1.803=0.600 mL = 3\lambda \implies \lambda = \frac{1.80}{3} = 0.600\text{ m}

    Correct

    L=3(λ2)  ⟹  λ=2L3=2(1.80 m)3=1.20 mL = 3\left(\frac{\lambda}{2}\right) \implies \lambda = \frac{2L}{3} = \frac{2(1.80\text{ m})}{3} = 1.20\text{ m}

    Each antinodal loop between adjacent nodes corresponds to half a wavelength (λ2\frac{\lambda}{2}), not a full wavelength. For three loops spanning length LL, the relationship is L=3λ2L = \frac{3\lambda}{2}.

  2. Step 2

    Tperiod=2Δt=2(1.25×10−2)=2.50×10−2 s  ⟹  f=12.50×10−2=40.0 HzT_{\text{period}} = 2\Delta t = 2(1.25 \times 10^{-2}) = 2.50 \times 10^{-2}\text{ s} \implies f = \frac{1}{2.50 \times 10^{-2}} = 40.0\text{ Hz}

  3. Step 3

    v=λf=(0.600)(40.0)=24.0 m/sv = \lambda f = (0.600)(40.0) = 24.0\text{ m/s}

    Correct

    v=λf=(1.20 m)(40.0 Hz)=48.0 m/sv = \lambda f = (1.20\text{ m})(40.0\text{ Hz}) = 48.0\text{ m/s}

    Your formula v=λfv = \lambda f and multiplication are correct, but the result is affected by substituting the incorrect wavelength from Step 1.

  4. Step 4

    v=Tμ  ⟹  μ=Tv2=72.0(24.0)2=0.125 kg/mv = \sqrt{\frac{T}{\mu}} \implies \mu = \frac{T}{v^2} = \frac{72.0}{(24.0)^2} = 0.125\text{ kg/m}

    Correct

    μ=Tv2=72.0 N(48.0 m/s)2≈0.0313 kg/m\mu = \frac{T}{v^2} = \frac{72.0\text{ N}}{(48.0\text{ m/s})^2} \approx 0.0313\text{ kg/m}

    Your algebraic rearrangement and substitution are correct, but the numerical answer inherits the incorrect wave speed from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that moving between opposite displacement extremes constitutes half an oscillation period.

You accurately calculated the frequency from the period.

You correctly recalled and manipulated both the wave speed formula v=λfv = \lambda f and the tension-density relation v=T/μv = \sqrt{T/\mu}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Antinodal loop misidentified as full wavelength

You set L=3λL = 3\lambda instead of L=3(λ/2)L = 3(\lambda/2) when counting the standing wave loops.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the spatial length of one antinodal loop (the distance between adjacent nodes) with an entire spatial wavelength. A complete wave cycle contains two loops: one crest and one trough.

REASONING PATH
Your ACEpath teacher’s suggested approach
Loop-to-Wavelength Rule
  • The distance between adjacent nodes (one antinodal loop) equals λ2\frac{\lambda}{2}.

  • Always write L=n(λ2)L = n\left(\frac{\lambda}{2}\right), where nn is the number of antinodes or loops.

Full Cycle Verification
  • One full wavelength λ\lambda contains two consecutive loops (one positive displacement lobe and one negative displacement lobe).

  • Check that the distance between alternate nodes (e.g., from node 1 to node 3) corresponds to λ\lambda.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the string length equal to three half-wavelengths: L=3(λ2)=1.80 mL = 3\left(\frac{\lambda}{2}\right) = 1.80\text{ m}.

  2. Solve for the wavelength: λ=2(1.80 m)3=1.20 m\lambda = \frac{2(1.80\text{ m})}{3} = 1.20\text{ m}.

  3. Recalculate wave speed using the correct wavelength: v=λf=(1.20 m)(40.0 Hz)=48.0 m/sv = \lambda f = (1.20\text{ m})(40.0\text{ Hz}) = 48.0\text{ m/s}.

  4. Recalculate linear mass density: μ=Tv2=72.0 N(48.0 m/s)2=0.03125 kg/m≈0.0313 kg/m\mu = \frac{T}{v^2} = \frac{72.0\text{ N}}{(48.0\text{ m/s})^2} = 0.03125\text{ kg/m} \approx 0.0313\text{ kg/m}.

Final answer

(a) λ=1.20 m\lambda = 1.20\text{ m}, (b) v=48.0 m/sv = 48.0\text{ m/s}, (c) μ=0.0313 kg/m\mu = 0.0313\text{ kg/m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the spatial geometry of a standing wave by sketching two adjacent loops and marking λ\lambda.

  • Practice setting up L=n(λ/2)L = n(\lambda/2) whenever a string is fixed at both ends.

  • Solve the targeted practice problems below to master standing wave relationships.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to square the wave speed when rearranging the formula v = √(T/μ), computing μ = T/v instead of μ = T/v².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    L=3(λ2)  ⟹  λ=2(1.80)3=1.20 mL = 3\left(\frac{\lambda}{2}\right) \implies \lambda = \frac{2(1.80)}{3} = 1.20\text{ m}

  2. Step 2

    Tperiod=2Δt=2.50×10−2 s  ⟹  f=1Tperiod=40.0 Hz  ⟹  v=λf=(1.20)(40.0)=48.0 m/sT_{\text{period}} = 2\Delta t = 2.50 \times 10^{-2}\text{ s} \implies f = \frac{1}{T_{\text{period}}} = 40.0\text{ Hz} \implies v = \lambda f = (1.20)(40.0) = 48.0\text{ m/s}

  3. Step 3

    v=Tμ  ⟹  μ=Tv=72.048.0=1.50 kg/mv = \sqrt{\frac{T}{\mu}} \implies \mu = \frac{T}{v} = \frac{72.0}{48.0} = 1.50\text{ kg/m}

    Correct

    v=Tμ  ⟹  v2=Tμ  ⟹  μ=Tv2=72.0 N(48.0 m/s)2=0.0313 kg/mv = \sqrt{\frac{T}{\mu}} \implies v^2 = \frac{T}{\mu} \implies \mu = \frac{T}{v^2} = \frac{72.0\text{ N}}{(48.0\text{ m/s})^2} = 0.0313\text{ kg/m}

    When isolating μ\mu from v=Tμv = \sqrt{\frac{T}{\mu}}, you must square both sides first to clear the radical, which yields v2=Tμv^2 = \frac{T}{\mu} and μ=Tv2\mu = \frac{T}{v^2}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the string length to the number of half-wavelength loops to find λ=1.20 m\lambda = 1.20\text{ m}.

You recognized that the peak-to-peak transit time corresponds to half an oscillation period (Tperiod=2ΔtT_{\text{period}} = 2\Delta t).

You correctly computed the wave frequency and wave speed using v=fλv = f\lambda.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic inversion error with radical equations

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You removed the square root from the right-hand side of v=Tμv = \sqrt{\frac{T}{\mu}} without squaring the left-hand side, leading to μ=Tv\mu = \frac{T}{v} rather than μ=Tv2\mu = \frac{T}{v^2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Clearing radicals in physical formulas
  • To isolate a variable inside a square root such as y=Axy = \sqrt{\frac{A}{x}}, square both sides completely: y2=Ax  ⟹  x=Ay2y^2 = \frac{A}{x} \implies x = \frac{A}{y^2}.

  • Always write out the intermediate squared line v2=Tμv^2 = \frac{T}{\mu} before rearranging for μ\mu.

Dimensional analysis sanity check
  • Check the units of your rearranged formula: [T/v]=Nm/s=kg⋅m/s2m/s=kg/s[T/v] = \frac{\text{N}}{\text{m/s}} = \frac{\text{kg}\cdot\text{m/s}^2}{\text{m/s}} = \text{kg/s}, whereas [T/v2]=Nm2/s2=kg/m[T/v^2] = \frac{\text{N}}{\text{m}^2/\text{s}^2} = \text{kg/m}.

  • Verify that the units of your final expression match the expected units of linear mass density (kg/m\text{kg/m}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Square both sides of the wave speed formula: v=Tμ  ⟹  v2=Tμv = \sqrt{\frac{T}{\mu}} \implies v^2 = \frac{T}{\mu}.

  2. Isolate linear mass density: μ=Tv2\mu = \frac{T}{v^2}.

  3. Substitute T=72.0 NT = 72.0\text{ N} and v=48.0 m/sv = 48.0\text{ m/s}: μ=72.0(48.0)2=72.02304=0.03125 kg/m\mu = \frac{72.0}{(48.0)^2} = \frac{72.0}{2304} = 0.03125\text{ kg/m}.

Final answer

(a) λ=1.20 m\lambda = 1.20\text{ m}, (b) v=48.0 m/sv = 48.0\text{ m/s}, (c) μ=0.0313 kg/m\mu = 0.0313\text{ kg/m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice explicitly writing the squared step v2=Tμv^2 = \frac{T}{\mu} whenever rearranging wave speed or period equations containing radicals.

  • Use dimensional checks on isolated expressions to catch missing exponents before calculating numerical values.

Lock it in

Similar question

01

A transverse wave on a string has a wavelength of λ=0.80 m\lambda = 0.80\text{ m}. A point on the string takes 0.020 s0.020\text{ s} to travel from its highest point to its lowest point. Calculate the wave speed vv.

Answer

v=20 m/sv = 20\text{ m/s}. The full period is T=2(0.020 s)=0.040 sT = 2(0.020\text{ s}) = 0.040\text{ s}, giving frequency f=25 Hzf = 25\text{ Hz}. Then v=fλ=(25 Hz)(0.80 m)=20 m/sv = f\lambda = (25\text{ Hz})(0.80\text{ m}) = 20\text{ m/s}.

02

A standing wave on a 2.40 m2.40\text{ m} string fixed at both ends oscillates in its 4th harmonic. The time for an antinode to move from +Amax+A_{\text{max}} to 00 (equilibrium) is 5.0×10−3 s5.0 \times 10^{-3}\text{ s}. Determine the wavelength λ\lambda and the wave speed vv.

Answer

λ=1.20 m\lambda = 1.20\text{ m}, v=60.0 m/sv = 60.0\text{ m/s}. For n=4n = 4, λ=2L4=1.20 m\lambda = \frac{2L}{4} = 1.20\text{ m}. Moving from +Amax+A_{\text{max}} to 00 takes T4=5.0×10−3 s\frac{T}{4} = 5.0 \times 10^{-3}\text{ s}, so T=2.0×10−2 sT = 2.0 \times 10^{-2}\text{ s} and f=50.0 Hzf = 50.0\text{ Hz}. Thus v=λf=(1.20 m)(50.0 Hz)=60.0 m/sv = \lambda f = (1.20\text{ m})(50.0\text{ Hz}) = 60.0\text{ m/s}.

03

A string of length L=1.50 mL = 1.50\text{ m} under tension Ttension=45.0 NT_{\text{tension}} = 45.0\text{ N} has a fundamental standing wave. A strobe camera measures 0.0150 s0.0150\text{ s} for an antinode to travel between +Amax+A_{\text{max}} and −Amax-A_{\text{max}}. Determine the total mass mm of the string.

Answer

m=0.0675 kg=67.5 gm = 0.0675\text{ kg} = 67.5\text{ g}. Fundamental mode has λ=2L=3.00 m\lambda = 2L = 3.00\text{ m}. Period T=2(0.0150 s)=0.0300 sT = 2(0.0150\text{ s}) = 0.0300\text{ s}, giving f=33.33 Hzf = 33.33\text{ Hz} and wave speed v=λf=100 m/sv = \lambda f = 100\text{ m/s}. Linear density μ=Ttensionv2=45.010000=4.50×10−3 kg/m\mu = \frac{T_{\text{tension}}}{v^2} = \frac{45.0}{10000} = 4.50 \times 10^{-3}\text{ kg/m}. Total mass m=μL=(4.50×10−3 kg/m)(1.50 m)=6.75×10−2 kgm = \mu L = (4.50 \times 10^{-3}\text{ kg/m})(1.50\text{ m}) = 6.75 \times 10^{-2}\text{ kg}.

Loading workspace…