Resources
A parallel-plate capacitor is constructed using two square conductive plates of side length separated by a vacuum gap of distance . A potential difference of is applied across the plates by a DC power supply. Assuming fringe effects are negligible and taking the permittivity of free space as , calculate: (a) the capacitance of the capacitor in picofarads (), (b) the magnitude of the charge stored on either plate in nanocoulombs (), and (c) the total electrostatic potential energy stored in the electric field between the plates in microjoules ().
Answer and steps
Final answer
(a) ; (b) ; (c)
Steps
Step 1: Convert units to standard SI values and determine plate area
To apply electrostatic equations correctly, all geometric quantities must be expressed in meters ():
- Plate side length:
- Plate separation:
The surface area of one square plate is:
Step 2: Calculate the capacitance (Part a)
The capacitance of an ideal parallel-plate capacitor with a vacuum dielectric is defined by the geometry of the plates and the permittivity of free space:
Substitute the given values:
Convert farads to picofarads ():
Common Pitfall: Forgetting to square the side length to find area , or incorrectly converting centimeters directly as millimeters, leads to errors of several orders of magnitude. Always convert lengths to meters before finding the area.
Step 3: Calculate the magnitude of the charge (Part b)
The relationship between the capacitance, the potential difference across the plates, and the magnitude of charge stored on either plate is:
Using the unrounded value of capacitance :
Convert coulombs to nanocoulombs ():
Step 4: Calculate the stored electrostatic energy (Part c)
The total electrostatic potential energy stored in the electric field between the plates is given by:
Using :
Convert joules to microjoules ():
Typical errors
01 The student forgets to square the side length to find the plate area, using the side length directly as area and underestimating capacitance, charge, and energy.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You converted the plate separation and side length to meters correctly, but you set the area equal to the side length instead of squaring it ().
- Step 2Correct
Your formula and prefix conversion to nanocoulombs were entirely correct, but the result inherited the incorrect capacitance value from Step 1.
- Step 3Correct
Your formula and conversion to microjoules were executed properly, but the numerical answer was affected by the initial capacitance error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled and applied the capacitance formula .
You correctly applied the charge equation .
You correctly applied the electrostatic energy formula .
You converted standard SI units to picofarads, nanocoulombs, and microjoules with accurate powers of ten.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo, this was not a minor arithmetic typo; you treated a linear side length as a two-dimensional area without applying .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked the geometric relationship between the side length of a square plate and its surface area, equating directly with after converting centimeters to meters.
REASONING PATH
Your ACEpath teacher’s suggested approach- Square Plate Area
For a square plate of side length , the surface area is , not .
Always write out the geometric area formula explicitly ( or ) before substituting numbers into .
- Dimensional Check
A side length in meters () cannot be directly written as square meters () without squaring the numerical value.
Check your units: if , then .
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the square plate area: .
Substitute into .
Calculate charge: .
Calculate energy: .
(a) ; (b) ; (c)
02 The student forgets the factor of 1/2 in the electrostatic potential energy formula, computing U = C(ΔV)² and doubling the stored energy.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You omitted the factor of in the electrostatic potential energy formula. Because the voltage across the capacitor rises linearly from to as charge accumulates, the average potential difference during charging is , leading to .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted all geometric dimensions to standard SI units before calculating the area.
You correctly applied and converted farads to picofarads.
You applied the relationship accurately to find the stored charge.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of , which yielded twice the actual stored electrostatic energy.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the total work supplied by a battery () with the potential energy stored in the capacitor's electric field (). Half of the energy supplied by the source is dissipated as heat or radiation during charging.
REASONING PATH
Your ACEpath teacher’s suggested approach- Capacitor Energy vs. Battery Work
Always verify that your capacitor energy formula contains the prefactor, analogous to kinetic energy or spring potential energy .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the complete formula for electrostatic energy: .
Substitute the values: .
Calculate the value in joules: .
Convert to microjoules (): .
(a) ; (b) ; (c)
03 The student forgets to square the potential difference in the energy formula, computing U = (1/2) C ΔV instead of (1/2) C (ΔV)².
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You wrote , which equals rather than energy. The correct formula requires squaring the voltage: .
WHAT YOU DID WELL
Compliments from Your TeacherYou converted centimeters and millimeters into meters before calculating the area and capacitance.
You correctly calculated the plate area and applied the parallel-plate capacitance formula .
You used the fundamental relation accurately to find the charge.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally omitted the square on , writing instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the dimensions of the equivalent energy expressions: . Substituting into yields a squared voltage factor, not a linear one.
REASONING PATH
Your ACEpath teacher’s suggested approach- Dimensional and Formula Check for Stored Energy
Capacitor potential energy is .
Always verify that your formula contains two first-power electrical quantities multiplied together (like and ) or one quantity squared divided/multiplied by .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the correct energy formula in terms of and : .
Substitute the values: .
Calculate: .
Convert to microjoules (): .
Lock it in
How do you find the plate area for a parallel-plate capacitor with square plates of side length ?
. Always convert to meters first, then square both the number and the unit to obtain .
Similar question
A parallel-plate capacitor has two square plates of side length separated by an air gap of . Calculate its capacitance in picofarads (). Take .
Answer
. Key steps: ; ; .
A parallel-plate capacitor uses circular plates of radius separated by a vacuum distance of . If a potential difference of is applied, find the charge stored on either plate in nanocoulombs ().
Answer
. Key steps: ; ; .
Two square conductive plates of side length are separated by a vacuum gap and charged to . If the plates are disconnected from the power supply and their separation is doubled to while maintaining charge conservation, calculate the change in stored electrostatic potential energy in microjoules ().
Answer
. Key steps: ; initial capacitance ; initial energy . Since is constant and separation doubles, and . Thus .