Resources

A tiny spherical pollen grain of mass m=1.50×10−8 kgm = 1.50\times 10^{-8}\text{ kg} falls vertically from rest through still air where it experiences a downward gravitational force and an upward viscous drag force modeled by Stokes' law, Fdrag=bvF_{\text{drag}} = b v, where b=4.90×10−7 N⋅s/mb = 4.90\times 10^{-7}\text{ N}\cdot\text{s/m} and g=9.80 m/s2g = 9.80\text{ m/s}^2. Identify the physical law governing the asymptotic steady-state condition as time t→∞t \to \infty, state the dynamic equilibrium criterion where acceleration vanishes, and calculate the terminal velocity vtermv_{\text{term}}.

Answer and steps

Final answer

Newton's First Law of Motion (Dynamic Equilibrium); ΣFy=mg−bvterm=0  ⟹  vterm=mgb\Sigma F_y = mg - b v_{\text{term}} = 0 \implies v_{\text{term}} = \frac{mg}{b}; vterm=0.300 m/sv_{\text{term}} = 0.300\text{ m/s}.

Steps

01

Identify the Governing Physical Law

As the pollen grain falls, its speed increases, causing the resistive drag force Fdrag=bvF_{\text{drag}} = bv to increase. Eventually, the upward drag force grows until it exactly balances the downward gravitational force.

When forces are balanced, the net force becomes zero, and the acceleration ceases (a=0a = 0). According to Newton's First Law of Motion, an object with zero net force acting upon it continues to move at a constant velocity. In this context of constant-velocity motion under balanced forces, the pollen grain is in a state of dynamic equilibrium.


02

Formulate the Dynamic Equilibrium Criterion

Choosing the downward direction as positive, the two vertical forces acting on the grain are:

  • Downward gravity: Fg=mgF_g = mg
  • Upward viscous drag: Fdrag=bvF_{\text{drag}} = bv

Applying Newton's second law along the vertical axis gives: ΣFy=mg−bv=ma\Sigma F_y = mg - bv = ma

In the asymptotic steady state (t→∞t \to \infty), the acceleration vanishes (a=0a = 0), and the speed approaches the constant terminal velocity vtermv_{\text{term}}: ΣFy=mg−bvterm=0\Sigma F_y = mg - bv_{\text{term}} = 0

Solving for vtermv_{\text{term}}: bvterm=mg  ⟹  vterm=mgbbv_{\text{term}} = mg \implies v_{\text{term}} = \frac{mg}{b}

Common Pitfall: Do not confuse static equilibrium (where an object is at rest, v=0v = 0) with dynamic equilibrium (where forces balance, a=0a = 0, but the object moves at a constant non-zero velocity v=vtermv = v_{\text{term}}).


03

Calculate the Terminal Velocity

Substitute the given numerical values into the expression:

  • m=1.50×10−8 kgm = 1.50 \times 10^{-8}\text{ kg}
  • g=9.80 m/s2g = 9.80\text{ m/s}^2
  • b=4.90×10−7 N⋅s/mb = 4.90 \times 10^{-7}\text{ N}\cdot\text{s/m}

vterm=(1.50×10−8 kg)(9.80 m/s2)4.90×10−7 N⋅s/mv_{\text{term}} = \frac{(1.50 \times 10^{-8}\text{ kg})(9.80\text{ m/s}^2)}{4.90 \times 10^{-7}\text{ N}\cdot\text{s/m}}

vterm=1.47×10−7 N4.90×10−7 N⋅s/m=0.300 m/sv_{\text{term}} = \frac{1.47 \times 10^{-7}\text{ N}}{4.90 \times 10^{-7}\text{ N}\cdot\text{s/m}} = 0.300\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the ratio when solving for terminal velocity, dividing the drag coefficient by the weight instead of weight by the drag coefficient.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Newton’s first law of motion\text{Newton's first law of motion}   ⟹  \implies F_{net\text{net}} = m ⋅\cdot g - b ⋅\cdot v = 0   ⟹  \implies b ⋅\cdot v_{term\text{term}} = m ⋅\cdot g

  2. Step 2

    v_{term\text{term}} = bm⋅g\frac{b}{m \cdot g}_

    Correct

    vterm=mgbv_{\text{term}} = \frac{mg}{b}

    To isolate vtermv_{\text{term}} from bvterm=mgb v_{\text{term}} = mg, you need to divide both sides by the coefficient bb, which yields vterm=mgbv_{\text{term}} = \frac{mg}{b} rather than bmg\frac{b}{mg}.

  3. Step 3

    v_{term\text{term}} = 4.90×10−71.50×10−8×9.80\frac{4.90 \times 10^{-7}}{1.50 \times 10^{-8} \times 9.80} = 4.90×10−71.47×10−7\frac{4.90 \times 10^{-7}}{1.47 \times 10^{-7}} = 3.33 m/s\text{ m/s}_

    Correct

    v_{term\text{term}} = 1.47×10−7 N4.90×10−7 N⋅s/m\frac{1.47 \times 10^{-7}\text{ N}}{4.90 \times 10^{-7}\text{ N}\cdot\text{s/m}} = 0.300 m/s\text{ m/s}_

    Because the formula was inverted in the previous step, substituting the numerical values yielded 3.33 m/s3.33\text{ m/s} instead of the correct reciprocal value 0.300 m/s0.300\text{ m/s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified Newton's first law of motion as the governing law when acceleration vanishes.

You correctly set the net vertical force to zero to represent dynamic equilibrium.

You accurately calculated the gravitational weight mg=1.47×10−7 Nmg = 1.47 \times 10^{-7}\text{ N}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic Inversion Error

You inverted the numerator and denominator when dividing both sides of bvterm=mgb v_{\text{term}} = mg by bb.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A quick algebraic isolation slip occurred where the coefficient multiplying the target variable was placed in the numerator rather than in the denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating Variables in Linear Equations
  • For an equation of the form k⋅x=yk \cdot x = y, dividing both sides by kk gives x=ykx = \frac{y}{k}.

  • Check that the coefficient originally multiplying your unknown ends up in the denominator of the isolated expression.

Dimensional / Unit Consistency Check
  • Terminal velocity must carry units of speed: [v]=m/s[v] = \text{m/s}.

  • Verify that [mg][b]=NN⋅s/m=m/s\frac{[mg]}{[b]} = \frac{\text{N}}{\text{N}\cdot\text{s/m}} = \text{m/s}, whereas bmg\frac{b}{mg} has units of s/m\text{s/m}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide both sides of bvterm=mgb v_{\text{term}} = mg by bb: vterm=mgbv_{\text{term}} = \frac{mg}{b}.

  2. Substitute mg=(1.50×10−8 kg)(9.80 m/s2)=1.47×10−7 Nmg = (1.50 \times 10^{-8}\text{ kg})(9.80\text{ m/s}^2) = 1.47 \times 10^{-7}\text{ N} and b=4.90×10−7 N⋅s/mb = 4.90 \times 10^{-7}\text{ N}\cdot\text{s/m}.

  3. Compute the ratio: vterm=1.47×10−74.90×10−7=0.300 m/sv_{\text{term}} = \frac{1.47 \times 10^{-7}}{4.90 \times 10^{-7}} = 0.300\text{ m/s}.

Final answer

v_{term\text{term}} = 0.300 m/s\text{ m/s}_

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating a variable from a product A⋅B=CA \cdot B = C and always circle the coefficient being divided out.

  • Perform a quick unit check on the isolated algebraic formula before plugging in numbers.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to multiply mass by gravitational acceleration g when balancing forces, setting m = b*v instead of m*g = b*v.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Newton's first law

  2. Step 2

    Equilibrium condition: m−b∗v=0  ⟹  vterm=mbm - b * v = 0 \implies v_{\text{term}} = \frac{m}{b}

    Correct

    ΣFy=mg−bvterm=0  ⟹  vterm=mgb\Sigma F_y = mg - bv_{\text{term}} = 0 \implies v_{\text{term}} = \frac{mg}{b}

    You set mass mm directly against the resistive force bvbv rather than the gravitational force Fg=mgF_g = mg. Because force equals mass times gravitational acceleration, the downward force is mgmg, not mm.

  3. Step 3

    vterm=(1.50×10−8)(4.90×10−7)  ⟹  vterm=0.0306 m/sv_{\text{term}} = \frac{(1.50\times 10^{-8})}{(4.90\times 10^{-7})} \implies v_{\text{term}} = 0.0306\text{ m/s}

    Correct

    vterm=(1.50×10−8 kg)(9.80 m/s2)4.90×10−7 N⋅s/m=0.300 m/sv_{\text{term}} = \frac{(1.50\times 10^{-8}\text{ kg})(9.80\text{ m/s}^2)}{4.90\times 10^{-7}\text{ N}\cdot\text{s/m}} = 0.300\text{ m/s}

    You carried out the arithmetic accurately based on your equation, but the missing factor of g=9.80 m/s2g = 9.80\text{ m/s}^2 led to a value exactly an order of magnitude too small.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that terminal velocity corresponds to dynamic equilibrium under Newton's first law.

You correctly isolated the velocity variable and accurately computed the division with scientific notation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating mass to force instead of weight ($mg$)

You treated mass mm as a downward force instead of multiplying by gg to find weight Fg=mgF_g = mg.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing mass (mm, in kilograms) with force/weight (Fg=mgF_g = mg, in newtons) in dynamic force balance equations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Homogeneity Check
  • Every term in a force balance equation must have dimensions of force (N=kg⋅m/s2\text{N} = \text{kg}\cdot\text{m/s}^2).

  • Check your units: mass mm has units of kg\text{kg}, whereas drag force bvbv has units of N\text{N}. Multiply mm by gg to obtain newtons before setting up ΣF=0\Sigma F = 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the net vertical force equation in dynamic equilibrium: ΣFy=Fg−Fdrag=0\Sigma F_y = F_g - F_{\text{drag}} = 0.

  2. Substitute the formulas for weight and viscous drag: mg−bvterm=0mg - bv_{\text{term}} = 0.

  3. Solve for terminal velocity symbolically: vterm=mgbv_{\text{term}} = \frac{mg}{b}.

  4. Substitute the given numerical values: vterm=(1.50×10−8 kg)(9.80 m/s2)4.90×10−7 N⋅s/m=1.47×10−7 N4.90×10−7 N⋅s/mv_{\text{term}} = \frac{(1.50\times 10^{-8}\text{ kg})(9.80\text{ m/s}^2)}{4.90\times 10^{-7}\text{ N}\cdot\text{s/m}} = \frac{1.47\times 10^{-7}\text{ N}}{4.90\times 10^{-7}\text{ N}\cdot\text{s/m}}.

  5. Compute the final velocity: vterm=0.300 m/sv_{\text{term}} = 0.300\text{ m/s}.

Final answer

vterm=0.300 m/sv_{\text{term}} = 0.300\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform a quick unit check on each term before solving an equilibrium equation to ensure all terms represent forces.

  • Practice drawing a simple free-body diagram labeling downward force as W=mgW = mg and upward force as Fdrag=bvF_{\text{drag}} = bv.

OverviewACEpath Teacher's Diagnosis

03 The student misremembers Stokes' drag force as depending quadratically on velocity (b*v²), leading to taking an extraneous square root.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Newton’s first law\text{Newton's first law}

  2. Step 2

    Fnet=m⋅g−b⋅v2=0F_{\text{net}} = m \cdot g - b \cdot v^2 = 0

    Correct

    ΣFy=mg−bv=0\Sigma F_y = m g - b v = 0

    You wrote the drag force as proportional to v2v^2, but the problem specifies Stokes' law with a linear velocity dependence: Fdrag=bvF_{\text{drag}} = b v.

  3. Step 3

    vterm2=m⋅gb  ⟹  vterm2=0.300  ⟹  vterm=0.300=0.548 m/sv_{\text{term}}^2 = \frac{m \cdot g}{b} \implies v_{\text{term}}^2 = 0.300 \implies v_{\text{term}} = \sqrt{0.300} = 0.548\text{ m/s}

    Correct

    vterm=mgb=0.300 m/sv_{\text{term}} = \frac{m g}{b} = 0.300\text{ m/s}

    Your algebraic rearrangement and calculation followed correctly from your quadratic equation, but because the drag is linear, no square root is needed.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified Newton's first law as the physical law governing the terminal velocity condition.

You set the net force to zero to represent dynamic equilibrium.

You performed the numerical arithmetic accurately based on your written equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear vs. Quadratic Drag Model Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted a quadratic aerodynamic drag model (F∝v2F \propto v^2) rather than following the given linear Stokes' drag law (Fdrag=bvF_{\text{drag}} = b v), leading to an extraneous square-root step.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify the Force Law Given in the Prompt
  • Stokes' viscous drag on small, slow-moving particles is linear in velocity (Fdrag=bvF_{\text{drag}} = b v), unlike high-speed aerodynamic drag which is quadratic (Fdrag=12ρCDAv2F_{\text{drag}} = \frac{1}{2}\rho C_D A v^2).

  • Always check the exact mathematical dependence defined in the problem statement before writing your net force equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ΣFy=mg−bvterm=0\Sigma F_y = m g - b v_{\text{term}} = 0

  2. bvterm=mg  ⟹  vterm=mgbb v_{\text{term}} = m g \implies v_{\text{term}} = \frac{m g}{b}

  3. vterm=(1.50×10−8 kg)(9.80 m/s2)4.90×10−7 N⋅s/m=0.300 m/sv_{\text{term}} = \frac{(1.50 \times 10^{-8}\text{ kg})(9.80\text{ m/s}^2)}{4.90 \times 10^{-7}\text{ N}\cdot\text{s/m}} = 0.300\text{ m/s}

Final answer

vterm=0.300 m/sv_{\text{term}} = 0.300\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical conditions that distinguish linear viscous drag (low Reynolds number, laminar flow) from quadratic drag (turbulent flow).

  • Read force formulas directly from the problem statement instead of relying on memory of generic drag equations.

Lock it in

Similar question

01

A small water droplet of mass m=2.0×10−6 kgm = 2.0 \times 10^{-6}\text{ kg} falls through air under a linear drag force Fd=bvF_d = b v with b=4.0×10−5 N⋅s/mb = 4.0 \times 10^{-5}\text{ N}\cdot\text{s/m}. Taking g=9.8 m/s2g = 9.8\text{ m/s}^2, find its terminal velocity vtermv_{\text{term}}.

Answer

At dynamic equilibrium, mg−bvterm=0  ⟹  vterm=mgbmg - bv_{\text{term}} = 0 \implies v_{\text{term}} = \frac{mg}{b}. Substituting values: vterm=(2.0×10−6 kg)(9.8 m/s2)4.0×10−5 N⋅s/m=1.96×10−54.0×10−5=0.49 m/sv_{\text{term}} = \frac{(2.0 \times 10^{-6}\text{ kg})(9.8\text{ m/s}^2)}{4.0 \times 10^{-5}\text{ N}\cdot\text{s/m}} = \frac{1.96 \times 10^{-5}}{4.0 \times 10^{-5}} = 0.49\text{ m/s}.

02

A micro-bead of mass m=3.0×10−5 kgm = 3.0 \times 10^{-5}\text{ kg} falls through a viscous liquid. In addition to gravity (g=9.8 m/s2g = 9.8\text{ m/s}^2) and Stokes' drag (b=1.2×10−3 N⋅s/mb = 1.2 \times 10^{-3}\text{ N}\cdot\text{s/m}), it experiences a constant upward buoyant force Fb=1.5×10−4 NF_b = 1.5 \times 10^{-4}\text{ N}. Determine its terminal velocity vtermv_{\text{term}}.

Answer

At dynamic equilibrium: ΣFy=mg−Fb−bvterm=0  ⟹  vterm=mg−Fbb\Sigma F_y = mg - F_b - b v_{\text{term}} = 0 \implies v_{\text{term}} = \frac{mg - F_b}{b}. With mg=2.94×10−4 Nmg = 2.94 \times 10^{-4}\text{ N}, net downward driving force is 2.94×10−4−1.50×10−4=1.44×10−4 N2.94 \times 10^{-4} - 1.50 \times 10^{-4} = 1.44 \times 10^{-4}\text{ N}. Thus vterm=1.44×10−4 N1.2×10−3 N⋅s/m=0.12 m/sv_{\text{term}} = \frac{1.44 \times 10^{-4}\text{ N}}{1.2 \times 10^{-3}\text{ N}\cdot\text{s/m}} = 0.12\text{ m/s}.

03

A particle of mass mm falls through a fluid where the resistive drag force is quadratic in speed: Fdrag=cv2F_{\text{drag}} = c v^2. Derive an algebraic expression for the terminal velocity vtermv_{\text{term}} in terms of mm, gg, and cc, and verify its dimensions.

Answer

At terminal velocity, acceleration is zero: mg−cvterm2=0  ⟹  cvterm2=mg  ⟹  vterm=mgcmg - c v_{\text{term}}^2 = 0 \implies c v_{\text{term}}^2 = mg \implies v_{\text{term}} = \sqrt{\frac{mg}{c}}. Dimensionally, [c]=N/(m/s)2=kg/m[c] = \text{N}/(\text{m/s})^2 = \text{kg/m}, so [mg/c]=(kg⋅m/s2)/(kg/m)=m2/s2[mg/c] = (\text{kg}\cdot\text{m/s}^2)/(\text{kg/m}) = \text{m}^2/\text{s}^2, and taking the square root gives m/s\text{m/s}.

Loading workspace…