Resources

A real non-ideal DC power supply has an open-circuit terminal voltage of E=12.0 V\mathcal{E} = 12.0\text{ V} and an internal resistance of r=0.750 Ωr = 0.750\,\Omega. An external variable load resistor RLR_L is connected across the supply terminals. In the asymptotic limit where the load resistance approaches a short circuit (RL→0 ΩR_L \to 0\,\Omega), use Ohm's law to evaluate the theoretical short-circuit current limit IscI_{\text{sc}}, and calculate the terminal voltage VtermV_{\text{term}} of the supply in this extreme boundary condition.

Answer and steps

Final answer

Isc=16.0 AI_{\text{sc}} = 16.0\text{ A}, Vterm=0.00 VV_{\text{term}} = 0.00\text{ V}

Steps

01

Model the Real Power Supply

A real (non-ideal) DC power source is modeled as an ideal electromotive force (EMF) E\mathcal{E} in series with an internal resistance rr. When an external load resistor RLR_L is connected across its terminals, the total equivalent resistance of the single-loop circuit is:

Rtotal=r+RLR_{\text{total}} = r + R_L


02

Apply Ohm's Law to Find the Short-Circuit Current (IscI_{\text{sc}})

By Ohm's law, the current flowing through the circuit for any load resistance RLR_L is:

I=ERtotal=Er+RLI = \frac{\mathcal{E}}{R_{\text{total}}} = \frac{\mathcal{E}}{r + R_L}

In the asymptotic limit where the terminals are short-circuited (RL→0 ΩR_L \to 0\ \Omega), the total resistance reduces entirely to the internal resistance rr:

Isc=lim⁡RL→0Er+RL=ErI_{\text{sc}} = \lim_{R_L \to 0} \frac{\mathcal{E}}{r + R_L} = \frac{\mathcal{E}}{r}

Substitute the given numerical values:

Isc=12.0 V0.750 Ω=16.0 AI_{\text{sc}} = \frac{12.0\text{ V}}{0.750\ \Omega} = 16.0\text{ A}


03

Calculate the Terminal Voltage (VtermV_{\text{term}})

The terminal voltage VtermV_{\text{term}} is the potential difference between the external output terminals. It can be verified using either of two equivalent methods:

  • From the load's perspective: Vterm=Isc⋅RL=16.0 A⋅0 Ω=0.00 VV_{\text{term}} = I_{\text{sc}} \cdot R_L = 16.0\text{ A} \cdot 0\ \Omega = 0.00\text{ V}
  • From the internal source's perspective: The terminal voltage equals the EMF minus the internal voltage drop across rr: Vterm=E−Isc⋅r=12.0 V−(16.0 A⋅0.750 Ω)=12.0 V−12.0 V=0.00 VV_{\text{term}} = \mathcal{E} - I_{\text{sc}} \cdot r = 12.0\text{ V} - (16.0\text{ A} \cdot 0.750\ \Omega) = 12.0\text{ V} - 12.0\text{ V} = 0.00\text{ V}

04

Summary and Pitfall to Avoid

  • Short-circuit current: Isc=16.0 AI_{\text{sc}} = 16.0\text{ A}
  • Terminal voltage: Vterm=0.00 VV_{\text{term}} = 0.00\text{ V}

Common Pitfall: Do not confuse the open-circuit EMF (E=12.0 V\mathcal{E} = 12.0\text{ V}) with the terminal voltage under load. In a complete short circuit, all of the source's electromotive force is dropped entirely across its own internal resistance, reducing the accessible terminal voltage to exactly zero.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the terminal voltage of the power supply under a short circuit with its open-circuit electromotive force, incorrectly concluding that the terminal voltage remains 12.0 V.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Isc=Er  ⟹  Isc=12.00.750=16.0 AI_{\text{sc}} = \frac{\mathcal{E}}{r} \implies I_{\text{sc}} = \frac{12.0}{0.750} = 16.0\text{ A}

  2. Step 2

    The power supply provides \text{The power supply provides } 12.0 V\text{ V}   ⟹  \implies V_{term\text{term}} = E\mathcal{E} = 12.0 V\text{ V}_

    Correct

    Vterm=E−Iscr=12.0 V−(16.0 A)(0.750 \Omega)=0.00 VV_{\text{term}} = \mathcal{E} - I_{\text{sc}} r = 12.0\text{ V} - (16.0\text{ A})(0.750\text{ \Omega}) = 0.00\text{ V}

    You set the terminal voltage equal to the open-circuit EMF E\mathcal{E}. When current flows, the internal resistance causes an internal potential drop IrI r, and under a complete short circuit (RL=0 \OmegaR_L = 0\text{ \Omega}), the entire voltage is dropped across rr, leaving Vterm=0.00 VV_{\text{term}} = 0.00\text{ V}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that a short circuit eliminates external resistance and sets Rtotal=rR_{\text{total}} = r.

You accurately computed the short-circuit current as 16.0 A16.0\text{ A} using Ohm's law.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating terminal voltage with electromotive force under load

No, this represents a conceptual confusion between open-circuit EMF and terminal voltage under load rather than an arithmetic slip.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the terminal voltage remains constant at the nominal open-circuit EMF (12.0 V12.0\text{ V}) regardless of current draw. For a non-ideal source, Vterm=E−Ir=IRLV_{\text{term}} = \mathcal{E} - Ir = IR_L. In a short circuit, RL=0 \OmegaR_L = 0\text{ \Omega} means the potential difference across the external terminals must collapse to 0 V0\text{ V}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Terminal Voltage Formula
  • Vterm=E−IrV_{\text{term}} = \mathcal{E} - Ir or Vterm=IRLV_{\text{term}} = IR_L

  • Always evaluate terminal voltage by subtracting the internal drop IrIr from E\mathcal{E}, or by multiplying current by the external load resistance RLR_L.

Short-Circuit Boundary Condition
  • Across an ideal short circuit (RL=0 \OmegaR_L = 0\text{ \Omega}), electric potential difference is identically zero.

  • Check whether your terminal voltage satisfies Vterm=I⋅(0 \Omega)=0 VV_{\text{term}} = I \cdot (0\text{ \Omega}) = 0\text{ V}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the terminal voltage equation for a real power supply: Vterm=E−IscrV_{\text{term}} = \mathcal{E} - I_{\text{sc}} r.

  2. Substitute the known values: Vterm=12.0 V−(16.0 A)(0.750 \Omega)=12.0 V−12.0 V=0.00 VV_{\text{term}} = 12.0\text{ V} - (16.0\text{ A})(0.750\text{ \Omega}) = 12.0\text{ V} - 12.0\text{ V} = 0.00\text{ V}.

  3. Alternatively, consider the load: Vterm=IscRL=(16.0 A)(0 \Omega)=0.00 VV_{\text{term}} = I_{\text{sc}} R_L = (16.0\text{ A})(0\text{ \Omega}) = 0.00\text{ V}.

Final answer

Isc=16.0 AI_{\text{sc}} = 16.0\text{ A}, Vterm=0.00 VV_{\text{term}} = 0.00\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice expressing terminal voltage as a function of current: Vterm(I)=E−IrV_{\text{term}}(I) = \mathcal{E} - Ir.

  • Verify boundary states: open circuit (I=0 A  ⟹  Vterm=EI = 0\text{ A} \implies V_{\text{term}} = \mathcal{E}) versus short circuit (RL=0 \Omega  ⟹  Vterm=0 VR_L = 0\text{ \Omega} \implies V_{\text{term}} = 0\text{ V}).

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets a short circuit as having infinite resistance rather than zero resistance, leading to a calculated current of zero and an unaffected terminal voltage.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Short circuit means no current passes through  ⟹  Isc=0 A\text{Short circuit means no current passes through} \implies I_{\text{sc}} = 0\text{ A}

    Correct

    Isc=Er=12.0 V0.750 Ω=16.0 AI_{\text{sc}} = \frac{\mathcal{E}}{r} = \frac{12.0\text{ V}}{0.750\ \Omega} = 16.0\text{ A}

    You treated a short circuit as having no current. In reality, a short circuit offers a path of zero external resistance (RL→0 ΩR_L \to 0\ \Omega), which allows the maximum possible current to flow through the internal resistance: Isc=ErI_{\text{sc}} = \frac{\mathcal{E}}{r}.

  2. Step 2

    Vterm=E−I∗r=12.0−0=12.0 VV_{\text{term}} = \mathcal{E} - I * r = 12.0 - 0 = 12.0\text{ V}

    Correct

    Vterm=E−Iscr=12.0 V−(16.0 A)(0.750 Ω)=0.00 VV_{\text{term}} = \mathcal{E} - I_{\text{sc}}r = 12.0\text{ V} - (16.0\text{ A})(0.750\ \Omega) = 0.00\text{ V}

    You used the correct equation for the terminal voltage of a real source, but your result was affected by substituting I=0 AI = 0\text{ A} instead of the correct short-circuit current of 16.0 A16.0\text{ A}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the terminal voltage formula relating source EMF, internal resistance, and loop current: Vterm=E−IrV_{\text{term}} = \mathcal{E} - Ir.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Short circuit vs. open circuit confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the definitions of a short circuit and an open circuit. An open circuit has infinite resistance (RL→∞R_L \to \infty), resulting in zero current (I=0 AI = 0\text{ A}) and full terminal voltage (Vterm=EV_{\text{term}} = \mathcal{E}). In contrast, a short circuit has zero resistance (RL→0 ΩR_L \to 0\ \Omega), resulting in maximum current (Isc=ErI_{\text{sc}} = \frac{\mathcal{E}}{r}) and zero terminal voltage (Vterm=0 VV_{\text{term}} = 0\text{ V}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Short Circuit vs. Open Circuit
  • An open circuit has R=∞R = \infty and I=0I = 0; a short circuit has R=0R = 0 and maximum current.

  • Whenever you see 'short circuit', immediately set the external resistance RL=0 ΩR_L = 0\ \Omega and calculate current using the remaining internal resistances in the loop.

Terminal Voltage of a Real Supply
  • Vterm=E−Ir=IRLV_{\text{term}} = \mathcal{E} - Ir = I R_L.

  • Check terminal voltage from both the source side (E−Ir\mathcal{E} - Ir) and the load side (IRLI R_L). For a short circuit, IRL=I(0)=0 VI R_L = I(0) = 0\text{ V}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the load resistance to zero for a short circuit: RL=0 ΩR_L = 0\ \Omega.

  2. Apply Ohm's law to the total loop: Isc=Er+RL=12.0 V0.750 Ω+0 Ω=16.0 AI_{\text{sc}} = \frac{\mathcal{E}}{r + R_L} = \frac{12.0\text{ V}}{0.750\ \Omega + 0\ \Omega} = 16.0\text{ A}.

  3. Determine the terminal voltage across the shorted output: Vterm=E−Iscr=12.0 V−(16.0 A)(0.750 Ω)=0.00 VV_{\text{term}} = \mathcal{E} - I_{\text{sc}}r = 12.0\text{ V} - (16.0\text{ A})(0.750\ \Omega) = 0.00\text{ V} (or equivalently, Vterm=IscRL=16.0 A×0 Ω=0.00 VV_{\text{term}} = I_{\text{sc}} R_L = 16.0\text{ A} \times 0\ \Omega = 0.00\text{ V}).

Final answer

Isc=16.0 AI_{\text{sc}} = 16.0\text{ A}, Vterm=0.00 VV_{\text{term}} = 0.00\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical contrast between an open-circuit boundary condition (R→∞R \to \infty, I=0I = 0) and a short-circuit boundary condition (R→0R \to 0, V=0V = 0).

  • Practice calculating circuit currents when a branch is shorted by replacing that branch with an ideal wire of zero resistance.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to subtract the internal resistance voltage drop from the EMF and instead adds it, yielding a terminal voltage greater than the EMF.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Isc=12.0/0.750=16.0 AI_{\text{sc}} = 12.0 / 0.750 = 16.0\text{ A}

  2. Step 2

    Vterm=E+Isc∗r  ⟹  Vterm=12.0+(16.0)(0.750)  ⟹  Vterm=12.0+12.0=24.0 VV_{\text{term}} = \mathcal{E} + I_{\text{sc}} * r \implies V_{\text{term}} = 12.0 + (16.0)(0.750) \implies V_{\text{term}} = 12.0 + 12.0 = 24.0\text{ V}

    Correct

    Vterm=E−Isc⋅r=12.0 V−(16.0 A)(0.750 Ω)=0.00 VV_{\text{term}} = \mathcal{E} - I_{\text{sc}} \cdot r = 12.0\text{ V} - (16.0\text{ A})(0.750\text{ }\Omega) = 0.00\text{ V}

    When a real battery discharges through a load, the current flows in the direction of the EMF, causing an internal potential drop across rr. Therefore, the terminal voltage is Vterm=E−IrV_{\text{term}} = \mathcal{E} - Ir, not E+Ir\mathcal{E} + Ir.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly modeled the short circuit by recognizing that the only resistance limiting the current is the internal resistance rr.

You accurately calculated the short-circuit current as 16.0 A16.0\text{ A}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in terminal voltage relation

You used a plus sign instead of a minus sign in the terminal voltage formula Vterm=E−IrV_{\text{term}} = \mathcal{E} - Ir.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the internal resistance as adding potential rather than subtracting it. When a power supply delivers current to an external circuit, current passes through the internal resistance in the direction of potential drop, reducing the available terminal voltage below the open-circuit EMF.

REASONING PATH
Your ACEpath teacher’s suggested approach
Terminal Voltage Formula for Discharging Source
  • Vterm=E−IrV_{\text{term}} = \mathcal{E} - I r when the source supplies current to an external circuit.

  • Always verify that the terminal voltage of a delivering source is less than or equal to its open-circuit EMF E\mathcal{E}.

Terminal Voltage from Load Perspective
  • Vterm=I⋅RLV_{\text{term}} = I \cdot R_L by Ohm's law across the external terminals.

  • When RL=0 ΩR_L = 0\text{ }\Omega (short circuit), check that Vterm=I⋅0=0 VV_{\text{term}} = I \cdot 0 = 0\text{ V} immediately.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the correct terminal voltage equation for a supplying power source: Vterm=E−IscrV_{\text{term}} = \mathcal{E} - I_{\text{sc}} r.

  2. Substitute the known values: Vterm=12.0 V−(16.0 A)(0.750 Ω)=12.0 V−12.0 V=0.00 VV_{\text{term}} = 12.0\text{ V} - (16.0\text{ A})(0.750\text{ }\Omega) = 12.0\text{ V} - 12.0\text{ V} = 0.00\text{ V}.

  3. Alternatively, evaluate across the external short circuit: Vterm=IscRL=(16.0 A)(0 Ω)=0.00 VV_{\text{term}} = I_{\text{sc}} R_L = (16.0\text{ A})(0\text{ }\Omega) = 0.00\text{ V}.

Final answer

Isc=16.0 AI_{\text{sc}} = 16.0\text{ A}, Vterm=0.00 VV_{\text{term}} = 0.00\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that a battery discharging current always has Vterm≤EV_{\text{term}} \le \mathcal{E}; a terminal voltage greater than E\mathcal{E} only occurs when the battery is being recharged by an external source.

  • Use the external load perspective Vterm=IRLV_{\text{term}} = I R_L as a fast sanity check for short-circuit and open-circuit conditions.

Lock it in

Similar question

01

A battery has an open-circuit EMF of E=6.0 V\mathcal{E} = 6.0\text{ V} and an internal resistance of r=0.50 \Omegar = 0.50\text{ \Omega}. A load resistor of RL=2.5 \OmegaR_L = 2.5\text{ \Omega} is connected across its terminals. Calculate the circuit current II and the resulting terminal voltage VtermV_{\text{term}}.

Answer

I=Er+RL=6.0 V0.50 \Omega+2.5 \Omega=2.0 AI = \frac{\mathcal{E}}{r + R_L} = \frac{6.0\text{ V}}{0.50\text{ \Omega} + 2.5\text{ \Omega}} = 2.0\text{ A}. Then Vterm=E−Ir=6.0 V−(2.0 A)(0.50 \Omega)=5.0 VV_{\text{term}} = \mathcal{E} - Ir = 6.0\text{ V} - (2.0\text{ A})(0.50\text{ \Omega}) = 5.0\text{ V} (or Vterm=IRL=2.0 A×2.5 \Omega=5.0 VV_{\text{term}} = I R_L = 2.0\text{ A} \times 2.5\text{ \Omega} = 5.0\text{ V}).

02

A DC generator with internal resistance r=0.20 \Omegar = 0.20\text{ \Omega} delivers a current of 25 A25\text{ A} to an external circuit, producing a terminal voltage of 115 V115\text{ V}. What is the internal electromotive force E\mathcal{E} of the generator?

Answer

Using Vterm=E−IrV_{\text{term}} = \mathcal{E} - Ir, solve for E\mathcal{E}: E=Vterm+Ir=115 V+(25 A)(0.20 \Omega)=115 V+5.0 V=120 V\mathcal{E} = V_{\text{term}} + Ir = 115\text{ V} + (25\text{ A})(0.20\text{ \Omega}) = 115\text{ V} + 5.0\text{ V} = 120\text{ V}.

03

A real battery has an EMF of E=10.0 V\mathcal{E} = 10.0\text{ V} and internal resistance r=1.0 \Omegar = 1.0\text{ \Omega}. (a) Determine the load resistance RLR_L for which the terminal voltage drops to exactly half of its open-circuit value (Vterm=5.0 VV_{\text{term}} = 5.0\text{ V}). (b) Find the power dissipated inside the battery under this condition.

Answer

(a) Vterm=ERLr+RL=E2  ⟹  RL=r=1.0 \OmegaV_{\text{term}} = \mathcal{E} \frac{R_L}{r + R_L} = \frac{\mathcal{E}}{2} \implies R_L = r = 1.0\text{ \Omega}. (b) Circuit current I=10.0 V1.0 \Omega+1.0 \Omega=5.0 AI = \frac{10.0\text{ V}}{1.0\text{ \Omega} + 1.0\text{ \Omega}} = 5.0\text{ A}. Internal power dissipation Pint=I2r=(5.0 A)2(1.0 \Omega)=25 WP_{\text{int}} = I^2 r = (5.0\text{ A})^2(1.0\text{ \Omega}) = 25\text{ W}.

Loading workspace…