Resources
A rigid horizontal beam of length and negligible mass is pinned at its left end () and supported by a vertical spring of force constant attached at its right end (). A point mass is placed on the beam at an arbitrary position , where . As the load approaches the hinge boundary (), determine the vertical deflection of the spring at the right end and the reaction force at the hinge in terms of , , , and , and evaluate both quantities in the asymptotic limit .
Answer and steps
Final answer
, with ; , with
Steps
Identify the Forces and Equilibrium Conditions
Consider the rigid beam of length lying along the -axis from to :
- At the hinge (): A vertical support reaction force acts upward. (Any horizontal force is zero because there are no external horizontal loads.)
- At the load location (): The point mass exerts a downward gravitational force of magnitude .
- At the right end (): The spring exerts an upward restoring force , where is the vertical displacement (compression or downward deflection at ) and is the spring constant.
For the beam to remain in static equilibrium, two conditions must be satisfied:
- Rotational equilibrium: The net torque about any pivot point is zero ().
- Translational equilibrium: The net vertical force is zero ().
Determine the Spring Deflection via Rotational Equilibrium
Taking the hinge at as the reference pivot eliminates the reaction force from the torque equation:
Choosing counterclockwise torques as positive:
Dividing both sides by the beam length :
Using Hooke's law, :
Determine the Hinge Reaction Force via Translational Equilibrium
Applying the vertical force balance:
Substitute :
Evaluate the Asymptotic Limit as
As the load approaches the hinge boundary ():
- Spring deflection:
- Hinge reaction force:
Physical Interpretation & Common Pitfall: A common mistake is assuming the spring always carries half the weight of the load. Because the torque exerted by the load is proportional to its lever arm , moving the load toward the pivot () reduces its torque to zero. In this limit, the entire weight of the mass is supported directly by the hinge, and the spring experiences zero load and zero deflection.
Typical errors
01 The student misidentifies the lever arm of the mass from the hinge as (1 - α)L instead of αL, inverting the dependence on α.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You chose the hinge at as your pivot, but you used as the lever arm for the weight. The position of the mass is , so its perpendicular distance from the hinge is . The quantity is the distance from the right end to the mass.
- Step 2Correct
You correctly applied Hooke's law and evaluated the limit as , but the result was affected by the inverted expression for from Step 1.
- Step 3Correct
You correctly stated the translational equilibrium condition and solved for , but substituting the incorrect caused to vanish as instead of carrying the full load.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that taking torques about the hinge eliminates the hinge reaction force .
You applied Hooke's law correctly to relate spring force and deflection.
You used vertical translational equilibrium correctly to relate , , and the load .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used the distance to the other end of the beam, , instead of the distance to the chosen pivot at , which is .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the coordinate of a point with its distance from the opposite boundary when computing torque lever arms.
REASONING PATH
Your ACEpath teacher’s suggested approach- Verify Lever Arm from Pivot
The lever arm for torque is the direct distance from the chosen pivot point to the line of action of the force.
Always explicitly write before writing the torque equation.
- Sanity-Check Asymptotic Limits
When a load sits directly on a support (here , right on the hinge), that support must carry of the load, leaving zero force on remote supports.
Check whether your limit matches physical intuition: as , the mass is on the hinge, so and .
CORRECTED PATH
ACEpath Teacher's Demonstrationwith ; with
02 The student assumes the beam acts symmetrically like a simply supported beam with equal load sharing of half the weight to each support.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You assumed equal 50/50 load sharing between the supports. Because the load is positioned at , its lever arm about the hinge is , so the rotational equilibrium condition determines .
- Step 2Correct
Because your expression for omitted the parameter , your evaluation of the asymptotic limit did not reflect that the spring deflection approaches zero as the load reaches the hinge.
- Step 3Correct
Vertical force equilibrium requires . Since , the hinge reaction must be , which depends on the position .
- Step 4Correct
As , the load sits directly over the hinge, so the hinge must support the entire weight .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly related the vertical deflection of the spring to its restoring force using Hooke's law, .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the beam as symmetrically loaded with each support carrying instead of writing a torque balance equation involving the position parameter .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOvergeneralizing the special case of a centrally placed load () to an arbitrary load position, overlooking that the fraction of weight borne by each support is determined by rotational equilibrium.
REASONING PATH
Your ACEpath teacher’s suggested approach- Pivot Selection and Torque Balance
For a rigid body in static equilibrium, about any pivot point.
Place the pivot at the hinge () to eliminate and solve directly for the spring force: .
- Asymptotic Consistency Check
When a point mass moves directly onto a rigid support, that support carries 100% of the load.
Check the physical limits: when , the mass sits on the hinge, so and the spring force must drop to .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite rotational equilibrium about the hinge at : .
Solve for the spring force: .
Apply Hooke's law to find the deflection: .
Apply vertical translational equilibrium: .
Take the limit as : and .
Lock it in
When taking torque about a pivot at position , how do you determine the lever arm for a vertical force acting at ?
The lever arm is the distance from the pivot: . Never use the distance to the opposite end of the beam.
Similar question
A light horizontal beam of length is hinged at its left end () and held horizontal by a vertical cable at its right end (). A mass of is placed at . Taking , find the tension in the cable and the vertical reaction force at the hinge.
Answer
Torque about hinge: . Vertical force balance: .
A uniform horizontal plank of length and weight is supported by two vertical scales at its ends and . A person of weight stands at position (where ). Find the reading on the right scale as a function of .
Answer
Take torques about : .
A horizontal massless beam of length is pinned at and supported by two identical springs of constant , one at and one at . A downward force is applied at . Assuming small deflections so the beam rotates rigidly by angle about the hinge, find the downward displacement of the beam's right tip in terms of , , and .
Answer
For small rotation , spring deflections are and , with upward forces and . Torque about hinge: . Thus , and the tip deflection is .