Resources

A block of mass m=0.400 kgm = 0.400\text{ kg} rests on a frictionless horizontal tabletop and is connected to a horizontal spring of stiffness constant k=160 N/mk = 160\text{ N/m}. At time t=0 st = 0\text{ s}, the block is pulled to an initial displacement of x0=+0.0500 mx_0 = +0.0500\text{ m} and given an initial velocity directed toward equilibrium of v0=−1.20 m/sv_0 = -1.20\text{ m/s}. Coupling mechanical energy conservation with kinematic harmonic motion parameters, determine: (a) the period TT of the resulting oscillation, and (b) the total amplitude AA of the motion.

Answer and steps

Final answer

(a) T=0.314 sT = 0.314\text{ s}; (b) A=0.0781 mA = 0.0781\text{ m} (or 7.81 cm7.81\text{ cm})

Steps

Part (a): Determine the Period TT

A horizontal block-spring system executes simple harmonic motion (SHM). The angular frequency ω\omega depends only on the spring constant kk and the mass mm:

ω=km\omega = \sqrt{\frac{k}{m}}

Substitute the given values m=0.400 kgm = 0.400\text{ kg} and k=160 N/mk = 160\text{ N/m}:

ω=160 N/m0.400 kg=400 s−2=20.0 rad/s\omega = \sqrt{\frac{160\text{ N/m}}{0.400\text{ kg}}} = \sqrt{400\text{ s}^{-2}} = 20.0\text{ rad/s}

The period TT is the time required for one complete cycle:

T=2πω=2π20.0 rad/s=π10 s≈0.314 sT = \frac{2\pi}{\omega} = \frac{2\pi}{20.0\text{ rad/s}} = \frac{\pi}{10}\text{ s} \approx 0.314\text{ s}


Part (b): Determine the Amplitude AA

Because the horizontal surface is frictionless, the total mechanical energy EE of the system is conserved throughout the motion.

The total energy can be expressed at any position as the sum of kinetic energy and elastic potential energy:

E=12mv2+12kx2E = \frac{1}{2}mv^2 + \frac{1}{2}kx^2

At maximum displacement (the amplitude AA), the block momentarily stops (v=0v = 0), so all the energy is stored as elastic potential energy:

E=12kA2E = \frac{1}{2}kA^2

Equating the total energy at t=0 st = 0\text{ s} to the maximum potential energy:

12kA2=12kx02+12mv02\frac{1}{2}kA^2 = \frac{1}{2}kx_0^2 + \frac{1}{2}mv_0^2

Multiply both sides by 2k\frac{2}{k}:

A2=x02+mkv02A^2 = x_0^2 + \frac{m}{k}v_0^2

Using mk=1ω2\frac{m}{k} = \frac{1}{\omega^2}:

A=x02+(v0ω)2A = \sqrt{x_0^2 + \left(\frac{v_0}{\omega}\right)^2}

Substitute the values x0=0.0500 mx_0 = 0.0500\text{ m}, v0=−1.20 m/sv_0 = -1.20\text{ m/s}, and ω=20.0 rad/s\omega = 20.0\text{ rad/s}:

v0ω=−1.20 m/s20.0 rad/s=−0.0600 m\frac{v_0}{\omega} = \frac{-1.20\text{ m/s}}{20.0\text{ rad/s}} = -0.0600\text{ m}

A=(0.0500 m)2+(−0.0600 m)2=0.00250+0.00360 m2=0.00610 m2≈0.0781 mA = \sqrt{(0.0500\text{ m})^2 + (-0.0600\text{ m})^2} = \sqrt{0.00250 + 0.00360\text{ m}^2} = \sqrt{0.00610\text{ m}^2} \approx 0.0781\text{ m}

Expressed in centimeters, A=7.81 cmA = 7.81\text{ cm}.

Common Pitfall: A frequent mistake is assuming the initial displacement x0=0.0500 mx_0 = 0.0500\text{ m} is the amplitude AA. The initial position only equals the amplitude if the block is released from rest (v0=0v_0 = 0). Because the block has an initial velocity directed toward equilibrium, it possesses kinetic energy that increases the total mechanical energy, resulting in A>x0A > x_0.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the period formula by inverting the ratio inside the square root as T = 2π√(k/m), leading to an incorrect period.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T=2πkm  ⟹  T=2π1600.400  ⟹  T=2π400=40π≈125.7 sT = 2\pi \sqrt{\frac{k}{m}} \implies T = 2\pi \sqrt{\frac{160}{0.400}} \implies T = 2\pi \sqrt{400} = 40\pi \approx 125.7\text{ s}

    Correct

    T=2πmk=2π0.400 kg160 N/m=2π20.0 rad/s≈0.314 sT = 2\pi \sqrt{\frac{m}{k}} = 2\pi \sqrt{\frac{0.400\text{ kg}}{160\text{ N/m}}} = \frac{2\pi}{20.0\text{ rad/s}} \approx 0.314\text{ s}

    You used k/m\sqrt{k/m} instead of m/k\sqrt{m/k}. The angular frequency is ω=k/m\omega = \sqrt{k/m}, so the period T=2πωT = \frac{2\pi}{\omega} must equal 2πmk2\pi \sqrt{\frac{m}{k}}.

  2. Step 2

    12kA2=12kx02+12mv02  ⟹  A2=x02+mkv02\frac{1}{2} k A^2 = \frac{1}{2} k x_0^2 + \frac{1}{2} m v_0^2 \implies A^2 = x_0^2 + \frac{m}{k} v_0^2

  3. Step 3

    A2=(0.0500)2+0.400160(−1.20)2  ⟹  A2=0.00250+0.00360=0.00610  ⟹  A=0.00610≈0.0781 mA^2 = (0.0500)^2 + \frac{0.400}{160} (-1.20)^2 \implies A^2 = 0.00250 + 0.00360 = 0.00610 \implies A = \sqrt{0.00610} \approx 0.0781\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that total mechanical energy is conserved and equates to the maximum elastic potential energy 12kA2\frac{1}{2}kA^2.

You carried through the algebraic rearrangement and numerical substitution for the amplitude with exact precision.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Formula Ratio

You inverted the mass and spring constant in the period formula, writing k/m\sqrt{k/m} instead of m/k\sqrt{m/k}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely confused the formula for period T=2π/ω=2πm/kT = 2\pi/\omega = 2\pi\sqrt{m/k} with angular frequency ω=k/m\omega = \sqrt{k/m}, forgetting that period is inversely proportional to ω\omega.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional & Physical Sanity Check
  • A stiffer spring (kk) speeds up the motion, making period TT shorter, while a heavier mass (mm) increases inertia, making period TT longer.

  • Always check that mm is in the numerator and kk is in the denominator for TT: T=2πmkT = 2\pi \sqrt{\frac{m}{k}}.

Derivation from Angular Frequency
  • Period and angular frequency are related by T=2πωT = \frac{2\pi}{\omega}.

  • When in doubt, write down ω=km\omega = \sqrt{\frac{k}{m}} first, then invert it to find T=2πω=2πmkT = \frac{2\pi}{\omega} = 2\pi\sqrt{\frac{m}{k}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the definition of angular frequency: ω=km=160 N/m0.400 kg=20.0 rad/s\omega = \sqrt{\frac{k}{m}} = \sqrt{\frac{160\text{ N/m}}{0.400\text{ kg}}} = 20.0\text{ rad/s}.

  2. Calculate period as the inverse relationship: T=2πω=2πmk=2π20.0 rad/s≈0.314 sT = \frac{2\pi}{\omega} = 2\pi \sqrt{\frac{m}{k}} = \frac{2\pi}{20.0\text{ rad/s}} \approx 0.314\text{ s}.

Final answer

(a) T≈0.314 sT \approx 0.314\text{ s}; (b) A≈0.0781 mA \approx 0.0781\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between angular frequency ω=k/m\omega = \sqrt{k/m} and period T=2πm/kT = 2\pi\sqrt{m/k}.

  • Practice using units or physical intuition (larger mass   ⟹  \implies longer period) to verify formula fractions before plugging in numbers.

OverviewACEpath Teacher's Diagnosis

02 The student assumes the initial position represents the maximum displacement and equates amplitude directly to x₀, ignoring the initial kinetic energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω=km=1600.400=20.0 rad/s  ⟹  T=2πω=2π20.0≈0.314 s\omega = \sqrt{\frac{k}{m}} = \sqrt{\frac{160}{0.400}} = 20.0\text{ rad/s} \implies T = \frac{2\pi}{\omega} = \frac{2\pi}{20.0} \approx 0.314\text{ s}

  2. Step 2

    A=x0  ⟹  A=0.0500 mA = x_0 \implies A = 0.0500\text{ m}

    Correct

    A=x02+(v0ω)2=(0.0500 m)2+(−1.20 m/s20.0 rad/s)2≈0.0781 mA = \sqrt{x_0^2 + \left(\frac{v_0}{\omega}\right)^2} = \sqrt{(0.0500\text{ m})^2 + \left(\frac{-1.20\text{ m/s}}{20.0\text{ rad/s}}\right)^2} \approx 0.0781\text{ m}

    You assumed that the initial position equals the maximum displacement. Because the block is already moving with v0=−1.20 m/sv_0 = -1.20\text{ m/s} at t=0 st = 0\text{ s}, the total mechanical energy includes initial kinetic energy, which makes the amplitude larger than x0x_0.

WHAT YOU DID WELL
Compliments from Your Teacher

You used the correct formula ω=k/m\omega = \sqrt{k/m} to find the angular frequency.

You related angular frequency to period with T=2π/ωT = 2\pi / \omega and computed the correct value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating amplitude to initial displacement when initial velocity is non-zero

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the initial release point as the turning point where velocity is zero, forgetting that a non-zero initial velocity adds initial kinetic energy to the system.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check for initial velocity
  • An initial position equals the amplitude (A=∣x0∣A = |x_0|) only when the object is released from rest (v0=0v_0 = 0).

  • Always check whether v0=0v_0 = 0 before equating displacement to amplitude; if v0≠0v_0 \neq 0, use energy conservation.

Apply energy conservation
  • Total mechanical energy in simple harmonic motion is conserved: 12kA2=12kx02+12mv02\frac{1}{2}kA^2 = \frac{1}{2}kx_0^2 + \frac{1}{2}mv_0^2.

  • Solve for amplitude using A=x02+mkv02=x02+(v0ω)2A = \sqrt{x_0^2 + \frac{m}{k}v_0^2} = \sqrt{x_0^2 + \left(\frac{v_0}{\omega}\right)^2}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the total mechanical energy conservation equation: 12kA2=12kx02+12mv02\frac{1}{2}kA^2 = \frac{1}{2}kx_0^2 + \frac{1}{2}mv_0^2.

  2. Divide by 12k\frac{1}{2}k: A2=x02+mkv02=x02+(v0ω)2A^2 = x_0^2 + \frac{m}{k}v_0^2 = x_0^2 + \left(\frac{v_0}{\omega}\right)^2.

  3. Substitute x0=0.0500 mx_0 = 0.0500\text{ m}, v0=−1.20 m/sv_0 = -1.20\text{ m/s}, and ω=20.0 rad/s\omega = 20.0\text{ rad/s}: A=(0.0500)2+(−0.0600)2=0.00250+0.00360=0.00610 mA = \sqrt{(0.0500)^2 + (-0.0600)^2} = \sqrt{0.00250 + 0.00360} = \sqrt{0.00610}\text{ m}.

  4. Evaluate the numerical square root: A≈0.0781 m=7.81 cmA \approx 0.0781\text{ m} = 7.81\text{ cm}.

Final answer

(a) T≈0.314 sT \approx 0.314\text{ s}; (b) A≈0.0781 mA \approx 0.0781\text{ m} (or 7.81 cm7.81\text{ cm})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how initial kinetic energy shifts the turning points (amplitude) further from the equilibrium position.

  • Practice using the relation A=x02+(v0/ω)2A = \sqrt{x_0^2 + (v_0/\omega)^2} for harmonic motion with general initial conditions.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to square the velocity term when applying kinetic energy in conservation of energy, resulting in an incorrect amplitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω=km=1600.400=20.0 rad/s  ⟹  T=2πω=2π20.0≈0.314 s\omega = \sqrt{\frac{k}{m}} = \sqrt{\frac{160}{0.400}} = 20.0\text{ rad/s} \implies T = \frac{2\pi}{\omega} = \frac{2\pi}{20.0} \approx 0.314\text{ s}

  2. Step 2

    (12)kA2=(12)kx02+(12)mv0  ⟹  A2=x02+mk∣v0∣(\frac{1}{2})kA^2 = (\frac{1}{2})kx_0^2 + (\frac{1}{2})mv_0 \implies A^2 = x_0^2 + \frac{m}{k}|v_0|

    Correct

    12kA2=12kx02+12mv02  ⟹  A2=x02+mkv02\frac{1}{2}kA^2 = \frac{1}{2}kx_0^2 + \frac{1}{2}mv_0^2 \implies A^2 = x_0^2 + \frac{m}{k}v_0^2

    You omitted the exponent in the kinetic energy formula, writing 12mv0\frac{1}{2}mv_0 instead of 12mv02\frac{1}{2}mv_0^2.

  3. Step 3

    A2=(0.0500)2+0.400160(1.20)=0.00250+0.00300=0.00550  ⟹  A=0.00550≈0.0742 mA^2 = (0.0500)^2 + \frac{0.400}{160}(1.20) = 0.00250 + 0.00300 = 0.00550 \implies A = \sqrt{0.00550} \approx 0.0742\text{ m}

    Correct

    A=(0.0500 m)2+0.400 kg160 N/m(−1.20 m/s)2=0.00610 m2≈0.0781 mA = \sqrt{(0.0500\text{ m})^2 + \frac{0.400\text{ kg}}{160\text{ N/m}}(-1.20\text{ m/s})^2} = \sqrt{0.00610\text{ m}^2} \approx 0.0781\text{ m}

    Your arithmetic was carried out accurately based on your equation, but the result is affected by the missing square on v0v_0.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related angular frequency ω\omega to spring stiffness kk and mass mm.

You correctly applied the relationship T=2πωT = \frac{2\pi}{\omega} to find the period.

You recognized that total mechanical energy is conserved and that total energy equals 12kA2\frac{1}{2}kA^2 at maximum displacement.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted exponent in kinetic energy formula

You wrote the kinetic energy term as 12mv0\frac{1}{2}mv_0 rather than 12mv02\frac{1}{2}mv_0^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You temporarily dropped the square exponent on velocity when setting up the kinetic energy component of the conservation of mechanical energy equation, violating dimensional consistency ([J]≠[kg⋅m/s][\text{J}] \neq [\text{kg}\cdot\text{m/s}]).

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Energy Formula
  • Translational kinetic energy is defined as K=12mv2K = \frac{1}{2}mv^2, which depends on the square of speed.

  • Check that any energy term involving mass and velocity contains v2v^2 before isolating variables.

Dimensional Consistency Check
  • Each term in A2=x02+…A^2 = x_0^2 + \dots must have units of length squared (m2\text{m}^2).

  • Notice that mkv=kgN/m⋅ms=s2⋅ms=m⋅s\frac{m}{k}v = \frac{\text{kg}}{\text{N/m}}\cdot\frac{\text{m}}{\text{s}} = \text{s}^2 \cdot \frac{\text{m}}{\text{s}} = \text{m}\cdot\text{s}, which is not m2\text{m}^2. Including v2v^2 yields s2⋅m2s2=m2\text{s}^2 \cdot \frac{\text{m}^2}{\text{s}^2} = \text{m}^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the total mechanical energy equation: 12kA2=12kx02+12mv02\frac{1}{2}kA^2 = \frac{1}{2}kx_0^2 + \frac{1}{2}mv_0^2

  2. Divide across by 12k\frac{1}{2}k: A2=x02+mkv02=x02+(v0ω)2A^2 = x_0^2 + \frac{m}{k}v_0^2 = x_0^2 + \left(\frac{v_0}{\omega}\right)^2

  3. Substitute x0=0.0500 mx_0 = 0.0500\text{ m}, v0=−1.20 m/sv_0 = -1.20\text{ m/s}, and ω=20.0 rad/s\omega = 20.0\text{ rad/s}: A2=(0.0500)2+(−0.0600)2=0.00250+0.00360=0.00610 m2A^2 = (0.0500)^2 + (-0.0600)^2 = 0.00250 + 0.00360 = 0.00610\text{ m}^2

  4. Take the square root: A=0.00610 m2≈0.0781 mA = \sqrt{0.00610\text{ m}^2} \approx 0.0781\text{ m}

Final answer

(a) T=0.314 sT = 0.314\text{ s}; (b) A=0.0781 mA = 0.0781\text{ m} (or 7.81 cm7.81\text{ cm})

NEXT STEPS
Final Takeaways from Your Teacher
  • Always double-check that the velocity is squared whenever computing kinetic energy: K=12mv2K = \frac{1}{2}mv^2.

  • Perform a quick unit check on derived formulas to ensure every additive term shares the same physical dimensions.

Lock it in

Similar question

01

A 0.250 kg0.250\text{ kg} glider oscillates on a horizontal air track connected to a spring with k=225 N/mk = 225\text{ N/m}. Calculate: (a) the angular frequency ω\omega, and (b) the period TT.

Answer

(a) ω=km=2250.250=30.0 rad/s\omega = \sqrt{\frac{k}{m}} = \sqrt{\frac{225}{0.250}} = 30.0\text{ rad/s}. (b) T=2πω=2π30.0≈0.209 sT = \frac{2\pi}{\omega} = \frac{2\pi}{30.0} \approx 0.209\text{ s}.

02

An object of mass m=0.500 kgm = 0.500\text{ kg} oscillates with period T=0.500 sT = 0.500\text{ s} on a horizontal spring. (a) Determine the spring stiffness constant kk. (b) If the amplitude is 0.0800 m0.0800\text{ m}, what is the maximum speed vmax⁡v_{\max}?

Answer

(a) Since T=2πm/kT = 2\pi\sqrt{m/k}, k=4π2mT2=4π2(0.500)(0.500)2=8π2≈79.0 N/mk = \frac{4\pi^2 m}{T^2} = \frac{4\pi^2(0.500)}{(0.500)^2} = 8\pi^2 \approx 79.0\text{ N/m}. (b) ω=2πT=4π rad/s\omega = \frac{2\pi}{T} = 4\pi\text{ rad/s}; vmax⁡=ωA=(4π)(0.0800)≈1.01 m/sv_{\max} = \omega A = (4\pi)(0.0800) \approx 1.01\text{ m/s}.

03

A 0.150 kg0.150\text{ kg} block on a frictionless surface is attached to a horizontal spring (k=60.0 N/mk = 60.0\text{ N/m}). At t=0t = 0, it is located at x0=−0.0400 mx_0 = -0.0400\text{ m} with velocity v0=+0.800 m/sv_0 = +0.800\text{ m/s}. Find: (a) the period TT, and (b) the amplitude AA.

Answer

(a) ω=60.00.150=20.0 rad/s\omega = \sqrt{\frac{60.0}{0.150}} = 20.0\text{ rad/s}, so T=2π20.0=π10≈0.314 sT = \frac{2\pi}{20.0} = \frac{\pi}{10} \approx 0.314\text{ s}. (b) By energy conservation, A=x02+(v0/ω)2=(−0.0400)2+(0.800/20.0)2=0.00160+0.00160=0.00320≈0.0566 mA = \sqrt{x_0^2 + (v_0/\omega)^2} = \sqrt{(-0.0400)^2 + (0.800/20.0)^2} = \sqrt{0.00160 + 0.00160} = \sqrt{0.00320} \approx 0.0566\text{ m} (or 5.66 cm5.66\text{ cm}).

Loading workspace…