Resources
In a physics lab experiment, a student measures the coefficient of kinetic friction between an aluminum cart of mass and a horizontal track. The cart is attached via an inextensible cord passing over a low-friction smart pulley to a hanging mass hanger of mass . A photogate timing system records that the cart starts from rest and traverses a photogate separation distance in an elapsed time . Assuming the track is level and taking : (a) calculate the experimental acceleration of the cart, and (b) determine the calculated value of the coefficient of kinetic friction .
Answer and steps
Final answer
(a) ; (b)
Steps
Part (a): Determine the Experimental Acceleration
Since the cart starts from rest with constant acceleration, its initial velocity is . We use the kinematic equation relating displacement, time, and acceleration:
Rearranging for the acceleration :
Substitute the given values:
Part (b): Determine the Coefficient of Kinetic Friction
To find , analyze the forces acting on the two masses using Newton's second law:
-
For the cart of mass on the horizontal track:
- In the vertical direction, the normal force balances gravity:
- The kinetic friction opposing the motion is:
- In the horizontal direction, tension accelerates the cart to the right against friction:
-
For the hanging mass :
- Gravity pulls downward and the tension acts upward:
-
Combining the two equations (or analyzing the system as a whole): Add the two equations together so that the internal tension cancels:
-
Solving for :
Pitfall: Avoid rounding intermediate values prematurely. Using the unrounded acceleration preserves precision.
Substitute the known values:
Typical errors
01 The student forgets the total mass of the system and accelerates only the cart mass m₁ by the net external force when solving Newton's second law.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
When the string pulls the cart, both masses accelerate together at the same rate. Therefore, the net external force accelerates the combined system mass , not just .
- Step 3Correct
Your algebraic rearrangement was executed correctly based on your equation from Step 2, but it inherited the missing term.
- Step 4Correct
Your numerical substitution and arithmetic were accurate, but the resulting value reflects the earlier system mass omission.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly selected and rearranged the kinematic formula to calculate the acceleration from displacement and time.
You correctly expressed the gravitational driving force and the kinetic friction force .
You performed accurate algebraic solving and arithmetic throughout your work.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated the net external force on the two-body system to rather than .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisTreating only the horizontal cart as accelerating when applying the net external force, forgetting that the hanging mass also accelerates with the same magnitude .
REASONING PATH
Your ACEpath teacher’s suggested approach- Define the Whole System
For connected objects tied together by an inextensible cord, all connected parts share the same magnitude of acceleration .
Always write when analyzing the system as a whole.
- Alternative Verification via Separate Free-Body Diagrams
Cart: ; Hanging mass: .
Add the two individual equations together to eliminate the internal cord tension and confirm that appears on the right-hand side.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the system equation with the combined mass: .
Isolate the friction term: .
Solve for the friction coefficient: .
Substitute the given values: .
(a) ; (b)
02 The student omits the factor of 1/2 in the kinematic formula for displacement from rest, setting Δx = a(Δt)² and doubling the calculated acceleration.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You omitted the factor of from the constant-acceleration kinematic equation . Because the cart starts from rest (), the formula requires in the numerator, yielding exactly double your calculated value.
- Step 2
- Step 3Correct
Your arithmetic is consistent with your earlier value of , but the result is inaccurate because of the inherited acceleration error from Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied Newton's second law to relate the driving gravitational force, kinetic friction, and total system mass.
You performed accurate algebraic rearrangement to isolate the coefficient of kinetic friction .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the displacement equation for constant acceleration from rest with an expression that lacks the averaging factor of , effectively treating average velocity as equal to final velocity rather than half of it.
REASONING PATH
Your ACEpath teacher’s suggested approach- Constant Acceleration Displacement
For motion starting from rest (), displacement is the area of a triangle on a graph: .
Always write down the full kinematic equation before rearranging for acceleration.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate acceleration using .
Substitute this value into your correct formula: .
Compute .
(a) ; (b)
03 The student assumes the tension in the cord equals the static weight of the hanging mass m₂g, neglecting the downward acceleration of the hanging mass.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the hanging mass is accelerating downward, the net vertical force is downward (). The cord tension must be strictly less than the static weight .
- Step 3Correct
Your algebraic setup for the cart's horizontal motion is correct, but substituting the incorrect value of tension ( instead of ) propagated to an inaccurate final value for .
WHAT YOU DID WELL
Compliments from Your TeacherYou used the correct kinematic relation for an object accelerating from rest to find the acceleration.
You correctly formulated Newton's second law for the horizontal cart: .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the hanging mass as being in static equilibrium () rather than in dynamic downward acceleration (), forgetting that a net downward force is required to accelerate mass .
REASONING PATH
Your ACEpath teacher’s suggested approach- Connected Accelerating Bodies
For a hanging mass accelerating downward, , which means .
Always draw a separate free-body diagram for each accelerating body and write along the direction of motion before solving for tension.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply Newton's second law to the hanging mass : .
Solve for the tension in the cord: .
Substitute this tension into your horizontal equation for : .
(a) ; (b)
Lock it in
When two masses and are connected by a taut string over a light pulley, what mass must you use on the right side of ?
Use the total mass of the accelerating system: .
Similar question
A cart of mass sits on a frictionless horizontal table and is attached by a light string over a frictionless pulley to a hanging mass . Taking , find the acceleration of the system.
Answer
. Setup: .
A block of mass rests on a rough horizontal surface with coefficient of kinetic friction . It is connected via a light cord over a pulley to a hanging mass . Taking , find the acceleration of the blocks once released.
Answer
. Setup: .
In a lab setup, a cart of mass is on a rough horizontal track connected to a hanging mass . The measured acceleration of the system is . Using , calculate the coefficient of kinetic friction between the cart and the track.
Answer
. Setup: .