Resources
A cylindrical glass tube of length is open at both ends. An ultrasonic speaker drives air inside the tube at a room temperature of (). At each open end, the acoustic pressure node extends slightly past the boundary by an end correction , where is the internal radius of the pipe. If the effective acoustic length creates a third harmonic () at an exact threshold frequency of , determine the internal diameter of the glass tube in centimeters.
Answer and steps
Final answer
Steps
Effective Acoustic Length of the Pipe
To find the internal diameter of the cylindrical tube, we analyze the standing wave condition for a pipe open at both ends, taking into account the end corrections.
For a pipe of physical length open at both ends, the acoustic pressure nodes (displacement antinodes) occur slightly outside the physical boundaries. Each open end contributes an end correction of:
where is the internal radius of the pipe. Since the tube is open at both ends, the correction applies at both terminations, giving an effective acoustic length of:
In terms of the internal diameter , this can be written as:
Resonance Condition for the Third Harmonic
For a tube open at both ends, the resonant frequencies are given by:
where:
- is the harmonic number,
- is the speed of sound in air at ,
- is the frequency of the third harmonic ().
Rearranging for the effective acoustic length :
Substitute the given values into this expression:
Calculating the Internal Diameter
Equating the two expressions for the effective length:
The total end correction is:
Accounting for the boundary conditions of the acoustic standing wave system with end correction parameter:
Solving for the internal diameter :
Typical errors
01 The student includes an end correction for only one open end instead of both ends of the tube.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the tube is open at both ends, an acoustic pressure node extends past the boundary at each end. You must add two end corrections () rather than just one.
- Step 3Correct
Your algebra and unit conversions were carried out accurately, but the resulting diameter is off by a factor of 2 due to omitting the second end correction in Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the third-harmonic frequency formula for an open-open cylindrical tube.
You accurately calculated the numerical effective acoustic length .
You properly recognized the relation between diameter and radius () and handled unit conversions between meters and centimeters cleanly.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accounted for the acoustic end correction at only one open end of the tube instead of both ends.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the boundary condition of a pipe open at both ends with that of a pipe closed at one end, forgetting that every open termination independently creates a displacement antinode extending past the physical rim.
REASONING PATH
Your ACEpath teacher’s suggested approach- Count the Open Boundaries
Every open end of an acoustic tube extends by . An open-open tube has two open ends, so .
Before writing , explicitly check how many ends are open and multiply by that count.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the full effective length equation for an open-open pipe: .
Substitute and : .
Solve for the total end correction: .
Calculate the diameter: .
02 The student misidentifies the internal radius as the final diameter, failing to multiply the radius by 2.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You equated the diameter directly to the radius . The diameter of a cylindrical tube is twice its radius ().
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified and applied the third-harmonic standing wave equation for an open-ended tube.
You correctly included the end correction at both open ends of the tube.
You accurately solved the linear equation for the internal radius in meters and converted it to centimeters.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou reported the internal radius as the final diameter , omitting the factor of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisThe formula for end correction is parameterized by radius (), whereas the prompt requested diameter (). After completing the algebraic solve for , you overlooked re-reading the prompt's target variable.
REASONING PATH
Your ACEpath teacher’s suggested approach- Target Variable Check
For circular and cylindrical geometries, always distinguish radius from diameter .
Before boxing your final numerical answer, verify whether the prompt asked for radius or diameter.
- End Correction in Terms of Diameter
Total end correction for a pipe open at both ends can be expressed directly as .
Substitute early if the problem asks directly for diameter to avoid forgetting the final multiplication.
CORRECTED PATH
ACEpath Teacher's DemonstrationTake the computed internal radius: .
Multiply by to calculate the internal diameter: .
03 The student treats the pipe as closed at one end, using the quarter-wavelength condition f_3 = 3 * v / (4 * L_eff).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the glass tube is open at both ends, displacement antinodes (pressure nodes) form at both boundaries, which means an integer number of half-wavelengths must fit inside the effective tube length: . Using a factor of in the denominator applies only to a tube closed at one end.
- Step 2Correct
You set up the double end correction correctly. However, substituting the underestimated caused the effective length to be shorter than the physical tube length (), which led to an unphysical negative radius.
- Step 3Correct
or directly
You calculated , but because of the initial resonance formula error, your final diameter is incorrect.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that a tube open at both ends requires an end correction at each termination, giving .
You correctly related the radius to diameter via and converted units into centimeters.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou selected the resonance condition for a tube closed at one end () instead of a tube open at both ends (). A reliable sanity check is that end corrections must make the effective acoustic length larger than the physical tube length (); obtaining or a negative radius signals an incorrect boundary condition.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Pipe Boundary Conditions
Open at both ends: antinode at both ends . Closed at one end: node at one end, antinode at the other (odd only).
Always highlight whether each pipe boundary is open or closed before writing down the resonance formula.
- Physical Reality Check for End Corrections
Acoustic pressure nodes extend slightly past an open opening, so .
If your calculated is less than the physical length , stop and check the harmonic denominator ( vs. ).
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the open-open pipe frequency equation: .
Solve for : .
Relate effective length to the physical length and diameter: .
Substitute the lengths: .
Solve for the diameter: (or if using the workbook convention ).
Lock it in
How many end corrections must be added to the physical length of a tube open at both ends to find its effective acoustic length ?
Two end corrections (). Each open boundary forms an antinode that extends outside the tube.
Similar question
An organ pipe of physical length is open at both ends and has an internal radius of . Taking the end correction at each open end to be , calculate the effective acoustic length of the pipe in meters.
Answer
. Key steps: Each open end adds . Since both ends are open, .
A pipe of physical length is closed at one end and open at the other. It resonates in its fundamental mode () at in air where . Using , determine the internal radius of the pipe in centimeters.
Answer
. Key steps: For a closed-open pipe, , so . Only the single open end has an end correction, so . Thus, , giving .
Two identical cylindrical tubes of length and internal diameter are driven at sound speed . Tube A is open at both ends, while Tube B is open at one end and closed at the other. Taking at each open end, find the difference between the fundamental frequency of Tube A () and twice the fundamental frequency of Tube B ().
Answer
(or a magnitude difference of ). Key steps: Radius , so . For Tube A (open-open): , so . For Tube B (closed-open): , so , giving . The difference is .