Resources

A theoretical model for the terminal velocity of a microscopic spherical particulate falling through air combines viscous Stokes drag and inertial quadratic drag into the composite force relation Fnet=mg−6πηrv−12Cdρairπr2v2=0F_{\text{net}} = m g - 6\pi \eta r v - \frac{1}{2} C_d \rho_{\text{air}} \pi r^2 v^2 = 0. (a) Determine the dimensions in fundamental SI base units (kg\text{kg}, m\text{m}, s\text{s}) for dynamic viscosity η\eta. (b) For air with dynamic viscosity η=1.81×10−5 kg/(m⋅s)\eta = 1.81 \times 10^{-5}\text{ kg}/(\text{m}\cdot\text{s}) and density ρair=1.20 kg/m3\rho_{\text{air}} = 1.20\text{ kg}/\text{m}^3, evaluate the critical droplet radius rcritr_{\text{crit}} at which the viscous drag force equals the inertial quadratic drag force when falling at v=0.500 m/sv = 0.500\text{ m}/\text{s} with Cd=0.440C_d = 0.440.

Answer and steps

Final answer

(a) [η]=kg/(m⋅s)[\eta] = \text{kg}/(\text{m}\cdot\text{s}); (b) rcrit=8.23×10−4 m=0.823 mmr_{\text{crit}} = 8.23 \times 10^{-4}\text{ m} = 0.823\text{ mm}.

Steps

Part (a): Determining the SI Base Units of Dynamic Viscosity η\eta

From the given net force equation, the term representing viscous resistance (Stokes' drag) is: Fviscous=6πηrvF_{\text{viscous}} = 6\pi \eta r v

Because 6π6\pi is a dimensionless numerical constant, the dimensional equation relating the physical quantities is: [F]=[η][r][v][F] = [\eta][r][v]

  1. Express each known quantity in fundamental SI base units:

    • Force (F=maF = m a): [F]=kg⋅m/s2[F] = \text{kg}\cdot\text{m}/\text{s}^2
    • Radius (rr): [r]=m[r] = \text{m}
    • Velocity (vv): [v]=m/s[v] = \text{m}/\text{s}
  2. Rearrange for [η][\eta]: [η]=[F][r][v]=kg⋅m/s2m⋅(m/s)=kg⋅m/s2m2/s[\eta] = \frac{[F]}{[r][v]} = \frac{\text{kg}\cdot\text{m}/\text{s}^2}{\text{m} \cdot (\text{m}/\text{s})} = \frac{\text{kg}\cdot\text{m}/\text{s}^2}{\text{m}^2/\text{s}}
  3. Simplify the units: [η]=kgm⋅s(or kg⋅m−1⋅s−1)[\eta] = \frac{\text{kg}}{\text{m}\cdot\text{s}} \quad (\text{or }\text{kg}\cdot\text{m}^{-1}\cdot\text{s}^{-1})

Part (b): Evaluating the Critical Droplet Radius rcritr_{\text{crit}}

The critical radius occurs when the viscous Stokes drag equals the inertial quadratic drag: Fviscous=FinertialF_{\text{viscous}} = F_{\text{inertial}} 6πηrcritv=12Cdρairπrcrit2v26\pi \eta r_{\text{crit}} v = \frac{1}{2} C_d \rho_{\text{air}} \pi r_{\text{crit}}^2 v^2

  1. Isolate rcritr_{\text{crit}} algebraically: Since rcrit>0r_{\text{crit}} > 0 and v>0v > 0, divide both sides by πrcritv\pi r_{\text{crit}} v: 6η=12Cdρairrcritv6 \eta = \frac{1}{2} C_d \rho_{\text{air}} r_{\text{crit}} v

    Multiply by 22 and solve for rcritr_{\text{crit}}: rcrit=12ηCdρairvr_{\text{crit}} = \frac{12\eta}{C_d \rho_{\text{air}} v}

  2. Substitute the given numerical values:

    • η=1.81×10−5 kg/(m⋅s)\eta = 1.81 \times 10^{-5}\text{ kg}/(\text{m}\cdot\text{s})
    • ρair=1.20 kg/m3\rho_{\text{air}} = 1.20\text{ kg}/\text{m}^3
    • v=0.500 m/sv = 0.500\text{ m}/\text{s}
    • Cd=0.440C_d = 0.440

    rcrit=12⋅(1.81×10−5 kg/(m⋅s))(0.440)⋅(1.20 kg/m3)⋅(0.500 m/s)r_{\text{crit}} = \frac{12 \cdot (1.81 \times 10^{-5}\text{ kg}/(\text{m}\cdot\text{s}))}{(0.440) \cdot (1.20\text{ kg}/\text{m}^3) \cdot (0.500\text{ m}/\text{s})}

  3. Compute the values:

    • Numerator: 12⋅1.81×10−5=2.172×10−4 kg/(m⋅s)12 \cdot 1.81 \times 10^{-5} = 2.172 \times 10^{-4}\text{ kg}/(\text{m}\cdot\text{s})
    • Denominator: 0.440⋅1.20⋅0.500=0.264 kg/(m2⋅s)0.440 \cdot 1.20 \cdot 0.500 = 0.264\text{ kg}/(\text{m}^2\cdot\text{s})

    rcrit=2.172×10−40.264 m≈8.23×10−4 m=0.823 mmr_{\text{crit}} = \frac{2.172 \times 10^{-4}}{0.264}\text{ m} \approx 8.23 \times 10^{-4}\text{ m} = 0.823\text{ mm}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to divide the inertial drag coefficient by 2, omitting the factor of 1/2 from the quadratic drag formula when isolating r_crit.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    F=6πηrv  ⟹  η=F6πrv  ⟹  [η]=kg⋅m/s2m⋅m/s=kg/(m⋅s)F = 6\pi \eta r v \implies \eta = \frac{F}{6\pi r v} \implies [\eta] = \frac{\text{kg}\cdot\text{m}/\text{s}^2}{\text{m}\cdot\text{m}/\text{s}} = \text{kg}/(\text{m}\cdot\text{s})

  2. Step 2

    6πηrv=Cdρπr2v2  ⟹  6η=Cdρrv  ⟹  r=6ηCdρv6\pi\eta r v = C_d \rho \pi r^2 v^2 \implies 6\eta = C_d \rho r v \implies r = \frac{6\eta}{C_d \rho v}

    Correct

    6πηrcritv=12Cdρairπrcrit2v2  ⟹  6η=12Cdρairrcritv  ⟹  rcrit=12ηCdρairv6\pi\eta r_{\text{crit}} v = \frac{1}{2} C_d \rho_{\text{air}} \pi r_{\text{crit}}^2 v^2 \implies 6\eta = \frac{1}{2} C_d \rho_{\text{air}} r_{\text{crit}} v \implies r_{\text{crit}} = \frac{12\eta}{C_d \rho_{\text{air}} v}

    You omitted the factor of 12\frac{1}{2} from the quadratic drag term Finertial=12Cdρairπr2v2F_{\text{inertial}} = \frac{1}{2} C_d \rho_{\text{air}} \pi r^2 v^2, which resulted in r=6ηCdρvr = \frac{6\eta}{C_d \rho v} instead of rcrit=12ηCdρairvr_{\text{crit}} = \frac{12\eta}{C_d \rho_{\text{air}} v}.

  3. Step 3

    r=6⋅1.81×10−50.440⋅1.20⋅0.500  ⟹  r=4.11×10−4 mr = \frac{6 \cdot 1.81 \times 10^{-5}}{0.440 \cdot 1.20 \cdot 0.500} \implies r = 4.11 \times 10^{-4}\text{ m}

    Correct

    rcrit=12⋅(1.81×10−5 kg/(m⋅s))(0.440)(1.20 kg/m3)(0.500 m/s)≈8.23×10−4 mr_{\text{crit}} = \frac{12 \cdot (1.81 \times 10^{-5}\text{ kg}/(\text{m}\cdot\text{s}))}{(0.440)(1.20\text{ kg}/\text{m}^3)(0.500\text{ m}/\text{s})} \approx 8.23 \times 10^{-4}\text{ m}

    Your arithmetic evaluation followed your formula correctly, but the numerical answer is half the true critical radius due to the missing factor of 22 in the numerator.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately derived the SI base units of dynamic viscosity from Stokes' law.

You recognized that the critical radius is found by equating the linear viscous drag and quadratic drag terms.

You performed the algebraic cancellation of common factors π\pi, rr, and vv accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Constant Factor in Drag Formula

You accidentally dropped the numerical coefficient 12\frac{1}{2} when transcribing the quadratic drag equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking prefactors like 12\frac{1}{2} when writing down empirical physical equations (analogous to the 12\frac{1}{2} in kinetic energy 12mv2\frac{1}{2}mv^2 or dynamic pressure 12ρv2\frac{1}{2}\rho v^2) propagates a factor-of-two scaling error into isolated variables.

REASONING PATH
Your ACEpath teacher’s suggested approach
Quadratic Drag Definition
  • Quadratic aerodynamic drag is based on dynamic pressure: Fd=12CdρAv2F_d = \frac{1}{2} C_d \rho A v^2.

  • Always write down the full standard formula containing the 12\frac{1}{2} prefactor before equating or isolating terms.

Equation Verification
  • When cross-multiplying or clearing fractions, ensure numeric multipliers multiply across the entire equality.

  • Check that 6=12…6 = \frac{1}{2} \dots becomes 12=…12 = \dots when multiplying both sides by 22.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the equality with the factor of 12\frac{1}{2} intact: 6πηrcritv=12Cdρairπrcrit2v26\pi \eta r_{\text{crit}} v = \frac{1}{2} C_d \rho_{\text{air}} \pi r_{\text{crit}}^2 v^2.

  2. Cancel common terms πrcritv\pi r_{\text{crit}} v on both sides: 6η=12Cdρairrcritv6 \eta = \frac{1}{2} C_d \rho_{\text{air}} r_{\text{crit}} v.

  3. Multiply both sides by 22 to isolate rcritr_{\text{crit}}: rcrit=12ηCdρairvr_{\text{crit}} = \frac{12\eta}{C_d \rho_{\text{air}} v}.

  4. Substitute the given numbers: rcrit=12×(1.81×10−5)0.440×1.20×0.500=2.172×10−40.264≈8.23×10−4 mr_{\text{crit}} = \frac{12 \times (1.81 \times 10^{-5})}{0.440 \times 1.20 \times 0.500} = \frac{2.172 \times 10^{-4}}{0.264} \approx 8.23 \times 10^{-4}\text{ m}.

Final answer

(a) [η]=kg/(m⋅s)[\eta] = \text{kg}/(\text{m}\cdot\text{s}); (b) rcrit=8.23×10−4 m=0.823 mmr_{\text{crit}} = 8.23 \times 10^{-4}\text{ m} = 0.823\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that all standard constants and prefactors (such as 12\frac{1}{2} in dynamic pressure and drag) are written down explicitly before simplifying.

  • Practice cross-multiplying fractional coefficients to avoid missing multiplicative factors of 22.

OverviewACEpath Teacher's Diagnosis

02 The student cancels v incorrectly against v² as if both sides had v², omitting the remaining factor of v in the denominator of r_crit.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    η=F6πrv  ⟹  [η]=Nm⋅m/s=kg⋅m/s2m2/s=kg/(m⋅s)\eta = \frac{F}{6\pi r v} \implies [\eta] = \frac{\text{N}}{\text{m}\cdot\text{m}/\text{s}} = \frac{\text{kg}\cdot\text{m}/\text{s}^2}{\text{m}^2/\text{s}} = \text{kg}/(\text{m}\cdot\text{s})

  2. Step 2

    6πηrv=12Cdρπr2v2  ⟹  6η=12Cdρr6\pi \eta r v = \frac{1}{2} C_d \rho \pi r^2 v^2 \implies 6\eta = \frac{1}{2} C_d \rho r

    Correct

    6πηrv=12Cdρπr2v2  ⟹  6η=12Cdρrv6\pi \eta r v = \frac{1}{2} C_d \rho \pi r^2 v^2 \implies 6\eta = \frac{1}{2} C_d \rho r v

    When dividing both sides by vv, the right-hand term v2v\frac{v^2}{v} simplifies to vv. You cancelled the entire v2v^2 term as if both sides contained v2v^2, leaving no velocity factor on the right.

  3. Step 3

    r=12ηCdρ=12⋅1.81×10−50.440⋅1.20  ⟹  r=4.11×10−4 mr = \frac{12\eta}{C_d \rho} = \frac{12 \cdot 1.81 \times 10^{-5}}{0.440 \cdot 1.20} \implies r = 4.11 \times 10^{-4}\text{ m}

    Correct

    rcrit=12ηCdρairv=12⋅(1.81×10−5)0.440⋅1.20⋅0.500≈8.23×10−4 mr_{\text{crit}} = \frac{12\eta}{C_d \rho_{\text{air}} v} = \frac{12 \cdot (1.81 \times 10^{-5})}{0.440 \cdot 1.20 \cdot 0.500} \approx 8.23 \times 10^{-4}\text{ m}

    Your numerical arithmetic correctly followed your algebraic expression, but because the factor of v=0.500 m/sv = 0.500\text{ m}/\text{s} was missing from the denominator, the final value was off by a factor of 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly isolated dynamic viscosity from Stokes' drag law and determined its SI base units.

You correctly identified the force equilibrium condition where viscous drag equals inertial drag.

You correctly handled the numerical substitution and arithmetic for the formula you wrote down.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Variable cancellation error across differing powers

You cancelled vv against v2v^2 and eliminated velocity completely instead of keeping a single power of vv.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating unequal exponents as identical during algebraic cross-cancellation, likely conflating dividing by a variable with striking it out on both sides.

REASONING PATH
Your ACEpath teacher’s suggested approach
Exponent Reduction Rule
  • When dividing xnx^n by xmx^m, the remaining power is xn−mx^{n-m}.

  • Write out v2v=v2−1=v\frac{v^2}{v} = v^{2-1} = v explicitly rather than crossing out variables without tracking remaining powers.

Dimensional Consistency Check
  • Both sides of an algebraic solution must have the same physical dimensions.

  • Verify that [ηρ]=m2/s\left[\frac{\eta}{\rho}\right] = \text{m}^2/\text{s}, which requires dividing by velocity [v]=m/s[v] = \text{m}/\text{s} to yield radius [r]=m[r] = \text{m}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide both sides of 6πηrv=12Cdρairπr2v26\pi \eta r v = \frac{1}{2} C_d \rho_{\text{air}} \pi r^2 v^2 by πrv\pi r v to get 6η=12Cdρairrv6\eta = \frac{1}{2} C_d \rho_{\text{air}} r v.

  2. Multiply both sides by 2 and divide by CdρairvC_d \rho_{\text{air}} v to isolate rcrit=12ηCdρairvr_{\text{crit}} = \frac{12\eta}{C_d \rho_{\text{air}} v}.

  3. Substitute the given values: rcrit=12⋅(1.81×10−5 kg/(m⋅s))0.440⋅(1.20 kg/m3)⋅(0.500 m/s)r_{\text{crit}} = \frac{12 \cdot (1.81 \times 10^{-5}\text{ kg}/(\text{m}\cdot\text{s}))}{0.440 \cdot (1.20\text{ kg}/\text{m}^3) \cdot (0.500\text{ m}/\text{s})}.

  4. Compute the result: rcrit=2.172×10−40.264≈8.23×10−4 m=0.823 mmr_{\text{crit}} = \frac{2.172 \times 10^{-4}}{0.264} \approx 8.23 \times 10^{-4}\text{ m} = 0.823\text{ mm}.

Final answer

rcrit=8.23×10−4 m=0.823 mmr_{\text{crit}} = 8.23 \times 10^{-4}\text{ m} = 0.823\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice reducing equations with linear versus quadratic terms by writing fractional division explicitly.

  • Perform a quick unit check on isolated variables before substituting numbers.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies force as kg·m/s instead of kg·m/s² by confusing momentum with force during dimensional analysis.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    η=F6πrv\eta = \frac{F}{6\pi r v}

  2. Step 2

    [F]=kg⋅m/s  ⟹  [η]=(kg⋅m/s)(m⋅m/s)=kg/m[F] = \text{kg}\cdot\text{m}/\text{s} \implies [\eta] = \frac{(\text{kg}\cdot\text{m}/\text{s})}{(\text{m}\cdot\text{m}/\text{s})} = \text{kg}/\text{m}

    Correct

    [F]=kg⋅m/s2  ⟹  [η]=kg⋅m/s2m⋅(m/s)=kg/(m⋅s)[F] = \text{kg}\cdot\text{m}/\text{s}^2 \implies [\eta] = \frac{\text{kg}\cdot\text{m}/\text{s}^2}{\text{m}\cdot(\text{m}/\text{s})} = \text{kg}/(\text{m}\cdot\text{s})

    From Newton's second law (F=maF = ma), force has base units of kg⋅m/s2\text{kg}\cdot\text{m}/\text{s}^2. Writing kg⋅m/s\text{kg}\cdot\text{m}/\text{s} represents momentum or impulse, which omits a factor of s−1\text{s}^{-1} from the denominator of η\eta.

  3. Step 3

    6πηrv=(12)Cdρπr2v2  ⟹  6η=(12)Cdρrv  ⟹  r=12ηCdρv6\pi \eta r v = \left(\frac{1}{2}\right) C_d \rho \pi r^2 v^2 \implies 6\eta = \left(\frac{1}{2}\right) C_d \rho r v \implies r = \frac{12\eta}{C_d \rho v}

  4. Step 4

    r=12⋅1.81×10−50.440⋅1.20⋅0.500  ⟹  r=8.23×10−4 mr = \frac{12 \cdot 1.81 \times 10^{-5}}{0.440 \cdot 1.20 \cdot 0.500} \implies r = 8.23 \times 10^{-4}\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the dimensional relationship for dynamic viscosity using Stokes' drag.

You successfully equated the viscous and inertial quadratic drag expressions to isolate rcritr_{\text{crit}}.

You accurately substituted all physical parameters and evaluated the correct numerical value for the critical radius.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional Analysis Unit Error

You wrote [F]=kg⋅m/s[F] = \text{kg}\cdot\text{m}/\text{s} instead of kg⋅m/s2\text{kg}\cdot\text{m}/\text{s}^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the base SI units of force with those of linear momentum or impulse, forgetting that acceleration contributes an extra factor of inverse seconds (exts−2 ext{s}^{-2}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall Newton's Second Law for Force Units
  • F=ma  ⟹  [F]=[m][a]=kg⋅(m/s2)=kg⋅m/s2F = ma \implies [F] = [m][a] = \text{kg}\cdot(\text{m}/\text{s}^2) = \text{kg}\cdot\text{m}/\text{s}^2.

  • Whenever decomposing a newton (N\text{N}) into base units, always write m⋅am \cdot a as kg⋅m/s2\text{kg} \cdot \text{m}/\text{s}^2 rather than m⋅vm \cdot v.

Cross-Check Given Quantities
  • The problem states η=1.81×10−5 kg/(m⋅s)\eta = 1.81 \times 10^{-5}\text{ kg}/(\text{m}\cdot\text{s}).

  • Compare your derived units with values supplied later in the same problem to catch missing powers of base units.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use [F]=[m][a]=kg⋅m/s2[F] = [m][a] = \text{kg}\cdot\text{m}/\text{s}^2.

  2. Substitute into [η]=[F][r][v]=kg⋅m/s2m⋅(m/s)[\eta] = \frac{[F]}{[r][v]} = \frac{\text{kg}\cdot\text{m}/\text{s}^2}{\text{m} \cdot (\text{m}/\text{s})}.

  3. Simplify the fraction: [η]=kg⋅m/s2m2/s=kgm⋅s[\eta] = \frac{\text{kg}\cdot\text{m}/\text{s}^2}{\text{m}^2/\text{s}} = \frac{\text{kg}}{\text{m}\cdot\text{s}}.

Final answer

(a) [η]=kg/(m⋅s)[\eta] = \text{kg}/(\text{m}\cdot\text{s}); (b) rcrit=8.23×10−4 m=0.823 mmr_{\text{crit}} = 8.23 \times 10^{-4}\text{ m} = 0.823\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental base-unit definitions of common derived quantities (Force, Momentum, Energy, Power).

  • Practice matching derived units against dimensional equations before carrying out algebraic reductions.

Lock it in

Similar question

01

A spherical particle moving at v=2.0 m/sv = 2.0\text{ m}/\text{s} through a fluid with ρ=1.0 kg/m3\rho = 1.0\text{ kg}/\text{m}^3 and η=2.0×10−4 kg/(m⋅s)\eta = 2.0 \times 10^{-4}\text{ kg}/(\text{m}\cdot\text{s}) experiences equal viscous drag (6πηrv6\pi\eta r v) and inertial quadratic drag (12Cdρπr2v2\frac{1}{2}C_d\rho \pi r^2 v^2). If Cd=0.50C_d = 0.50, find the critical radius rr.

Answer

r=2.4×10−3 mr = 2.4 \times 10^{-3}\text{ m} (or 2.4 mm2.4\text{ mm}). Setting 6πηrv=12Cdρπr2v26\pi \eta r v = \frac{1}{2} C_d \rho \pi r^2 v^2 yields r=12ηCdρv=12(2.0×10−4)(0.50)(1.0)(2.0)=2.4×10−3 mr = \frac{12\eta}{C_d \rho v} = \frac{12(2.0 \times 10^{-4})}{(0.50)(1.0)(2.0)} = 2.4 \times 10^{-3}\text{ m}.

02

A spherical water droplet falls through air (ρair=1.25 kg/m3\rho_{\text{air}} = 1.25\text{ kg}/\text{m}^3, η=1.80×10−5 Pa⋅s\eta = 1.80 \times 10^{-5}\text{ Pa}\cdot\text{s}, Cd=0.45C_d = 0.45). At what speed vv will a droplet of radius r=0.60 mmr = 0.60\text{ mm} have equal viscous and inertial drag forces?

Answer

v=0.64 m/sv = 0.64\text{ m}/\text{s}. From rcrit=12ηCdρairvr_{\text{crit}} = \frac{12\eta}{C_d \rho_{\text{air}} v}, isolate vv: v=12ηCdρairr=12(1.80×10−5)(0.45)(1.25)(6.0×10−4)=0.64 m/sv = \frac{12\eta}{C_d \rho_{\text{air}} r} = \frac{12(1.80 \times 10^{-5})}{(0.45)(1.25)(6.0 \times 10^{-4})} = 0.64\text{ m}/\text{s}.

03

Consider a modified drag regime where linear drag is F1=b1vF_1 = b_1 v and quadratic drag is F2=b2v2F_2 = b_2 v^2. For a sphere of radius rr, b1=6πηrb_1 = 6\pi \eta r and b2=12Cdρπr2b_2 = \frac{1}{2} C_d \rho \pi r^2. Determine how the transition speed vtransv_{\text{trans}} (where F1=F2F_1 = F_2) scales with radius rr, and compute the ratio vtrans(2r)/vtrans(r)v_{\text{trans}}(2r) / v_{\text{trans}}(r).

Answer

Ratio is 12\frac{1}{2}. Equating forces gives 6πηrvtrans=12Cdρπr2vtrans2  ⟹  vtrans=12ηCdρr∝r−16\pi \eta r v_{\text{trans}} = \frac{1}{2} C_d \rho \pi r^2 v_{\text{trans}}^2 \implies v_{\text{trans}} = \frac{12\eta}{C_d \rho r} \propto r^{-1}. Doubling the radius cuts the transition speed in half.

Loading workspace…