Resources

A small crate of mass m=12.0 kgm = 12.0\text{ kg} is projected up a ramp inclined at an angle of θ=30.0∘\theta = 30.0^\circ above the horizontal with an initial speed of v0=8.50 m/sv_0 = 8.50\text{ m/s}. The crate slides along the ramp while subject to kinetic friction with a coefficient of μk=0.220\mu_k = 0.220. Taking the base of the incline as y=0 my = 0\text{ m}, calculate: (a) the initial kinetic energy K0K_0 of the crate, (b) the maximum vertical height hmaxh_{\text{max}} above the base reached by the crate before instantaneously coming to rest, and (c) the gravitational potential energy UgU_g of the crate at this highest point. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

(a) K0=434 JK_0 = 434\text{ J}; (b) hmax=2.65 mh_{\text{max}} = 2.65\text{ m}; (c) Ug=312 JU_g = 312\text{ J}.

Steps

Part (a): Calculate the Initial Kinetic Energy

The initial kinetic energy K0K_0 of the crate depends only on its mass mm and initial speed v0v_0:

K0=12mv02K_0 = \frac{1}{2}m v_0^2

Substitute the given values (m=12.0 kgm = 12.0\text{ kg} and v0=8.50 m/sv_0 = 8.50\text{ m/s}):

K0=12(12.0 kg)(8.50 m/s)2=6.00⋅72.25 J=433.5 J≈434 JK_0 = \frac{1}{2}(12.0\text{ kg})(8.50\text{ m/s})^2 = 6.00 \cdot 72.25\text{ J} = 433.5\text{ J} \approx 434\text{ J}


Part (b): Calculate the Maximum Height Reached

As the crate moves up the ramp, it decelerates due to two forces directed down the incline: the parallel component of gravity and the kinetic friction force.

  1. Identify the forces perpendicular and parallel to the incline:

    • Perpendicular to the ramp: N=mgcos⁡θN = mg\cos\theta
    • Kinetic friction opposing the upward motion: fk=μkN=μkmgcos⁡θf_k = \mu_k N = \mu_k mg\cos\theta
    • Parallel component of gravity directed down the ramp: Fg,∥=mgsin⁡θF_{g,\parallel} = mg\sin\theta
  2. Determine the acceleration aa down the incline: Applying Newton's second law along the ramp: ΣF=mgsin⁡θ+μkmgcos⁡θ=ma\Sigma F = mg\sin\theta + \mu_k mg\cos\theta = ma a=g(sin⁡θ+μkcos⁡θ)a = g(\sin\theta + \mu_k\cos\theta)

    Substituting g=9.80 m/s2g = 9.80\text{ m/s}^2, θ=30.0∘\theta = 30.0^\circ, and μk=0.220\mu_k = 0.220: a=9.80(sin⁡30.0∘+0.220cos⁡30.0∘)a = 9.80\left(\sin 30.0^\circ + 0.220\cos 30.0^\circ\right) a=9.80(0.500+0.220⋅0.8660)=9.80(0.500+0.1905)≈6.77 m/s2a = 9.80\left(0.500 + 0.220 \cdot 0.8660\right) = 9.80(0.500 + 0.1905) \approx 6.77\text{ m/s}^2

  3. Calculate the sliding distance dd along the ramp: Using the kinematic equation v2=v02−2adv^2 = v_0^2 - 2ad with final speed v=0v = 0: d=v022a=(8.50 m/s)22(6.77 m/s2)=72.2513.54≈5.30 md = \frac{v_0^2}{2a} = \frac{(8.50\text{ m/s})^2}{2(6.77\text{ m/s}^2)} = \frac{72.25}{13.54} \approx 5.30\text{ m}
  4. Find the vertical height hmaxh_{\text{max}}: Using the geometry of the inclined plane: hmax=dsin⁡θ=5.30 m⋅sin⁡30.0∘=5.30 m⋅0.500=2.65 mh_{\text{max}} = d\sin\theta = 5.30\text{ m} \cdot \sin 30.0^\circ = 5.30\text{ m} \cdot 0.500 = 2.65\text{ m}

(Pitfall to avoid: Do not apply simple conservation of mechanical energy K0=mghK_0 = mgh, because non-conservative work done by friction dissipates a portion of the mechanical energy into thermal energy.)


Part (c): Calculate the Gravitational Potential Energy at the Highest Point

With the reference level y=0 my = 0\text{ m} at the base of the ramp, the gravitational potential energy UgU_g at the maximum height is:

Ug=mghmaxU_g = mgh_{\text{max}}

Substitute m=12.0 kgm = 12.0\text{ kg}, g=9.80 m/s2g = 9.80\text{ m/s}^2, and hmax=2.65 mh_{\text{max}} = 2.65\text{ m}:

Ug=(12.0 kg)(9.80 m/s2)(2.65 m)=311.64 J≈312 JU_g = (12.0\text{ kg})(9.80\text{ m/s}^2)(2.65\text{ m}) = 311.64\text{ J} \approx 312\text{ J}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores friction entirely and assumes mechanical energy is conserved, leading to an overestimated maximum height and potential energy equal to the initial kinetic energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    K0=12mv02  ⟹  K0=12(12.0)(8.50)2=433.5 JK_0 = \frac{1}{2}m v_0^2 \implies K_0 = \frac{1}{2}(12.0)(8.50)^2 = 433.5\text{ J}

  2. Step 2

    K0=Ug  ⟹  mghmax=K0  ⟹  hmax=K0mg=433.512.0×9.80=3.69 mK_0 = U_g \implies m g h_{\text{max}} = K_0 \implies h_{\text{max}} = \frac{K_0}{mg} = \frac{433.5}{12.0 \times 9.80} = 3.69\text{ m}

    Correct

    K0=mghmax+fkd  ⟹  hmax=2.65 mK_0 = m g h_{\text{max}} + f_k d \implies h_{\text{max}} = 2.65\text{ m}

    You set initial kinetic energy equal to final potential energy, but kinetic friction does negative work on the crate as it slides up the ramp. Using the work-energy theorem with friction (Wnc=ΔEmechW_{\text{nc}} = \Delta E_{\text{mech}}) or Newton's second law along the incline gives hmax=2.65 mh_{\text{max}} = 2.65\text{ m}.

  3. Step 3

    Ug=mghmax  ⟹  Ug=(12.0)(9.80)(3.69)=433.5 JU_g = m g h_{\text{max}} \implies U_g = (12.0)(9.80)(3.69) = 433.5\text{ J}

    Correct

    Ug=mghmax=(12.0)(9.80)(2.65)=312 JU_g = m g h_{\text{max}} = (12.0)(9.80)(2.65) = 312\text{ J}

    Your formula for gravitational potential energy is correct, but your numerical answer is affected by the incorrect value of hmaxh_{\text{max}} from step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the initial kinetic energy using K0=12mv02K_0 = \frac{1}{2}m v_0^2.

You correctly related vertical height to gravitational potential energy using Ug=mghU_g = mgh.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ignoring non-conservative work (friction) in energy conservation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed mechanical energy is conserved on a rough surface, overlooking that kinetic friction dissipates mechanical energy into thermal energy (Wf=−fkdW_f = -f_k d).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Non-Conservative Forces
  • When a surface has friction (muk>0\\mu_k > 0), mechanical energy is not conserved: Ei+Wtextnc=EfE_i + W_{\\text{nc}} = E_f.

  • Check whether non-conservative forces act along the path before writing Ki+Ui=Kf+UfK_i + U_i = K_f + U_f.

Express Friction Work in Terms of Height
  • Friction acts along the distance d=frachsinthetad = \\frac{h}{\\sin\\theta}, giving Wf=−(mukmgcostheta)left(frachsinthetaright)=−mukmghcotthetaW_f = -( \\mu_k mg \\cos\\theta ) \\left(\\frac{h}{\\sin\\theta}\\right) = -\\mu_k mg h \\cot\\theta.

  • Substitute d=h/sinthetad = h / \\sin\\theta into the work-energy equation to solve directly for hh.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the work-energy theorem: K0+Wf=UgK_0 + W_f = U_g, where Wf=−fkdW_f = -f_k d.

  2. Express the normal force on the incline: N=mgcos⁡θN = mg\cos\theta, so fk=μkmgcos⁡θf_k = \mu_k mg\cos\theta.

  3. Relate the distance along the ramp dd to vertical height: d=hmaxsin⁡θd = \frac{h_{\text{max}}}{\sin\theta}.

  4. Substitute into the energy equation: K0−(μkmgcos⁡θ)(hmaxsin⁡θ)=mghmaxK_0 - (\mu_k mg\cos\theta)\left(\frac{h_{\text{max}}}{\sin\theta}\right) = mgh_{\text{max}}.

  5. Factor out hmaxh_{\text{max}}: K0=mghmax(1+μkcot⁡θ)K_0 = mgh_{\text{max}}(1 + \mu_k\cot\theta).

  6. Solve for height: hmax=433.5 J(12.0 kg)(9.80 m/s2)(1+0.220cot⁡30.0∘)=433.5117.6(1+0.381)≈2.65 mh_{\text{max}} = \frac{433.5\text{ J}}{(12.0\text{ kg})(9.80\text{ m/s}^2)(1 + 0.220\cot 30.0^\circ)} = \frac{433.5}{117.6(1 + 0.381)} \approx 2.65\text{ m}.

  7. Calculate UgU_g: Ug=mghmax=(12.0)(9.80)(2.65)≈312 JU_g = mgh_{\text{max}} = (12.0)(9.80)(2.65) \approx 312\text{ J}.

Final answer

(a) K0=434 JK_0 = 434\text{ J}; (b) hmax=2.65 mh_{\text{max}} = 2.65\text{ m}; (c) Ug=312 JU_g = 312\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out a free-body diagram to verify whether any non-conservative forces like friction or drag are doing work.

  • When friction is present on an incline of angle θ\theta, remember that d=h/sin⁡θd = h / \sin\theta and the energy balance is K0=mgh+fkdK_0 = mgh + f_k d.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the distance d slid along the incline with the vertical height h_max, incorrectly using normal force N = mg and equating friction work directly to μ_k m g h.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    K0=12mv02  ⟹  K0=12(12.0)(8.50)2=433.5 JK_0 = \frac{1}{2}m v_0^2 \implies K_0 = \frac{1}{2}(12.0)(8.50)^2 = 433.5\text{ J}

  2. Step 2

    N=mg  ⟹  fk=μkmgN = mg \implies f_k = \mu_k mg

    Correct

    N=mgcos⁡θ  ⟹  fk=μkmgcos⁡θN = mg\cos\theta \implies f_k = \mu_k mg\cos\theta

    On an incline of angle θ\theta, the normal force balances the perpendicular component of gravity, which gives N=mgcos⁡θN = mg\cos\theta rather than mgmg.

  3. Step 3

    K0=mghmax+fkhmax=mghmax(1+μk)  ⟹  hmax=433.5(12.0)(9.80)(1+0.220)=3.02 mK_0 = mgh_{\text{max}} + f_k h_{\text{max}} = mgh_{\text{max}}(1 + \mu_k) \implies h_{\text{max}} = \frac{433.5}{(12.0)(9.80)(1 + 0.220)} = 3.02\text{ m}

    Correct

    K0=mghmax+fkd=mghmax+μkmgcos⁡θ(hmaxsin⁡θ)  ⟹  hmax≈2.65 mK_0 = mgh_{\text{max}} + f_k d = mgh_{\text{max}} + \mu_k mg\cos\theta\left(\frac{h_{\text{max}}}{\sin\theta}\right) \implies h_{\text{max}} \approx 2.65\text{ m}

    Friction acts along the surface over the ramp distance d=hmaxsin⁡θd = \frac{h_{\text{max}}}{\sin\theta}, not over the vertical rise hmaxh_{\text{max}}. Equating initial kinetic energy to gravitational potential energy plus friction work along the ramp gives K0=mghmax(1+μkcot⁡θ)K_0 = mgh_{\text{max}}(1 + \mu_k\cot\theta).

  4. Step 4

    Ug=mghmax  ⟹  Ug=(12.0)(9.80)(3.02)=355 JU_g = mgh_{\text{max}} \implies U_g = (12.0)(9.80)(3.02) = 355\text{ J}

    Correct

    Ug=mghmax=(12.0 kg)(9.80 m/s2)(2.65 m)≈312 JU_g = mgh_{\text{max}} = (12.0\text{ kg})(9.80\text{ m/s}^2)(2.65\text{ m}) \approx 312\text{ J}

    You correctly identified the gravitational potential energy formula Ug=mghmaxU_g = mgh_{\text{max}}, but the numerical result is affected by the incorrect height found in part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the initial kinetic energy from mass and initial speed.

You correctly identified that initial kinetic energy transforms into gravitational potential energy and thermal energy dissipated by friction.

You correctly applied the gravitational potential energy formula Ug=mghU_g = mgh.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inclined Plane Friction & Geometry Confusion

No, this is a conceptual misunderstanding involving inclined plane normal force and distinguishing along-ramp distance from vertical height.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed the normal force on an incline is N=mgN = mg and substituted the vertical height hmaxh_{\text{max}} into the friction work formula Wf=fkdW_f = f_k d instead of the actual distance along the incline d=hmaxsin⁡θd = \frac{h_{\text{max}}}{\sin\theta}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Normal Force on an Incline
  • When a surface is tilted at angle θ\theta to the horizontal, the normal force is N=mgcos⁡θN = mg\cos\theta.

  • Always resolve gravity into parallel (mgsin⁡θmg\sin\theta) and perpendicular (mgcos⁡θmg\cos\theta) components before finding friction.

Friction Acts Along the Path
  • Friction work depends on the sliding distance along the surface: Wf=fkdW_f = f_k d, where d=hsin⁡θd = \frac{h}{\sin\theta}.

  • Do not multiply friction force by vertical height; use the ramp distance dd.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the normal force along the perpendicular axis: N=mgcos⁡θN = mg\cos\theta.

  2. Express the friction force opposing motion: fk=μkN=μkmgcos⁡θf_k = \mu_k N = \mu_k mg\cos\theta.

  3. Relate the distance dd along the ramp to vertical height: d=hmaxsin⁡θd = \frac{h_{\text{max}}}{\sin\theta}.

  4. Apply the work-energy theorem: K0=mghmax+fkd=mghmax+(μkmgcos⁡θ)(hmaxsin⁡θ)=mghmax(1+μkcot⁡θ)K_0 = mgh_{\text{max}} + f_k d = mgh_{\text{max}} + (\mu_k mg\cos\theta)\left(\frac{h_{\text{max}}}{\sin\theta}\right) = mgh_{\text{max}}(1 + \mu_k\cot\theta).

  5. Solve for hmaxh_{\text{max}}: hmax=K0mg(1+μkcot⁡θ)=433.5(12.0)(9.80)(1+0.220cot⁡30.0∘)=433.5117.6(1+0.381)≈2.65 mh_{\text{max}} = \frac{K_0}{mg(1 + \mu_k\cot\theta)} = \frac{433.5}{(12.0)(9.80)(1 + 0.220\cot 30.0^\circ)} = \frac{433.5}{117.6(1 + 0.381)} \approx 2.65\text{ m}.

  6. Calculate UgU_g: Ug=mghmax=(12.0)(9.80)(2.65)≈312 JU_g = mgh_{\text{max}} = (12.0)(9.80)(2.65) \approx 312\text{ J}.

Final answer

(a) K0=434 JK_0 = 434\text{ J}; (b) hmax=2.65 mh_{\text{max}} = 2.65\text{ m}; (c) Ug=312 JU_g = 312\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing free-body diagrams on inclined planes to routinely identify N=mgcos⁡θN = mg\cos\theta.

  • Review the difference between along-path displacement dd and vertical displacement h=dsin⁡θh = d\sin\theta in work-energy problems.

OverviewACEpath Teacher's Diagnosis

03 The student solves for the stopping distance d along the incline correctly but forgets to multiply by sin 30.0° to convert it to the vertical height h_max.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    K0=12mv02  ⟹  K0=12(12.0)(8.50)2=433.5 JK_0 = \frac{1}{2} m v_0^2 \implies K_0 = \frac{1}{2}(12.0)(8.50)^2 = 433.5\text{ J}

  2. Step 2

    fk=μkmgcos⁡θ  ⟹  K0=mgdsin⁡θ+fkd=mgd(sin⁡θ+μkcos⁡θ)  ⟹  d=433.5[117.6(0.500+0.1905)]=5.34 mf_k = \mu_k mg\cos\theta \implies K_0 = mgd\sin\theta + f_k d = mgd(\sin\theta + \mu_k\cos\theta) \implies d = \frac{433.5}{[117.6(0.500 + 0.1905)]} = 5.34\text{ m}

  3. Step 3

    hmax=5.34 mh_{\text{max}} = 5.34\text{ m}

    Correct

    hmax=dsin⁡θ=(5.34 m)sin⁡30.0∘≈2.65 mh_{\text{max}} = d\sin\theta = (5.34\text{ m})\sin 30.0^\circ \approx 2.65\text{ m}

    The distance dd is measured along the slanted ramp surface, whereas vertical height hh is the opposite side of the right triangle: hmax=dsin⁡θh_{\text{max}} = d\sin\theta.

  4. Step 4

    Ug=mghmax  ⟹  Ug=(12.0)(9.80)(5.34)=628 JU_g = mg h_{\text{max}} \implies U_g = (12.0)(9.80)(5.34) = 628\text{ J}

    Correct

    Ug=mghmax=(12.0)(9.80)(2.65)≈312 JU_g = mg h_{\text{max}} = (12.0)(9.80)(2.65) \approx 312\text{ J}

    You used the correct potential energy formula, but your result was inflated because it inherited the incorrect value of hmaxh_{\text{max}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the initial kinetic energy using K0=12mv02K_0 = \frac{1}{2}mv_0^2.

You correctly formulated the work-energy relation by including the work done against friction along the incline.

You correctly solved for the distance dd traveled along the ramp.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Distance vs. Height Confusion on Incline

You equated the vertical height hmaxh_{\text{max}} directly to the sliding distance dd along the ramp.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the hypotenuse of an inclined plane (distance traveled along the ramp, dd) with the vertical leg (height above the ground, h=dsin⁡θh = d\sin\theta). Notice that with your calculated height, Ug=628 JU_g = 628\text{ J} would exceed the initial total energy K0=434 JK_0 = 434\text{ J}, which is a helpful signal that a geometric conversion was missed.

REASONING PATH
Your ACEpath teacher’s suggested approach
Incline Geometry Check
  • h=dsin⁡θh = d\sin\theta

  • Always draw a right triangle for the incline and label the hypotenuse as distance dd and the vertical side as height hh before calculating potential energy.

Energy Sanity Check
  • Ug,top≤K0U_{g,\text{top}} \le K_0 when friction is present

  • Verify that the final potential energy does not exceed the initial kinetic energy when friction removes mechanical energy from the system.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the trigonometric relationship for the vertical leg of the incline: hmax=dsin⁡θh_{\text{max}} = d\sin\theta.

  2. Substitute d=5.30 md = 5.30\text{ m} (or 5.34 m5.34\text{ m}) and θ=30.0∘\theta = 30.0^\circ: hmax=5.30sin⁡30.0∘=2.65 mh_{\text{max}} = 5.30\sin 30.0^\circ = 2.65\text{ m}.

  3. Recalculate gravitational potential energy at this height: Ug=mghmax=(12.0 kg)(9.80 m/s2)(2.65 m)=312 JU_g = mgh_{\text{max}} = (12.0\text{ kg})(9.80\text{ m/s}^2)(2.65\text{ m}) = 312\text{ J}.

Final answer

(a) K0=434 JK_0 = 434\text{ J}; (b) hmax=2.65 mh_{\text{max}} = 2.65\text{ m}; (c) Ug=312 JU_g = 312\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the trigonometric definitions on an incline: identify whether a quantity represents a vertical displacement (hh) or displacement along the surface (dd).

  • Perform a quick sanity check at the end of energy problems: make sure non-conservative forces like friction cause total mechanical energy to decrease rather than increase.

Lock it in

Similar question

01

A 4.0 kg4.0\text{ kg} block is launched horizontally across a rough floor with an initial speed of 6.0 m/s6.0\text{ m/s}. The coefficient of kinetic friction is μk=0.30\mu_k = 0.30. Using work and energy, calculate the distance dd the block slides before stopping. Take g=9.8 m/s2g = 9.8\text{ m/s}^2.

Answer

d=6.1 md = 6.1\text{ m}. Key steps: Initial kinetic energy is K0=12mv02=72 JK_0 = \frac{1}{2}m v_0^2 = 72\text{ J}. Friction force is fk=μkmg=(0.30)(4.0)(9.8)=11.76 Nf_k = \mu_k mg = (0.30)(4.0)(9.8) = 11.76\text{ N}. Set K0=fkd  ⟹  d=7211.76≈6.12 mK_0 = f_k d \implies d = \frac{72}{11.76} \approx 6.12\text{ m}.

02

A 5.0 kg5.0\text{ kg} cart is projected up a θ=45∘\theta = 45^\circ incline with an initial speed of 10.0 m/s10.0\text{ m/s}. If friction dissipates 80 J80\text{ J} of mechanical energy as the cart travels up to its stopping point, find: (a) the initial kinetic energy K0K_0, and (b) the maximum vertical height hmaxh_{\text{max}} reached. Take g=9.8 m/s2g = 9.8\text{ m/s}^2.

Answer

(a) K0=250 JK_0 = 250\text{ J}; (b) hmax=3.47 mh_{\text{max}} = 3.47\text{ m}. Key steps: K0=12(5.0)(10.0)2=250 JK_0 = \frac{1}{2}(5.0)(10.0)^2 = 250\text{ J}. From energy conservation with thermal loss: K0−Eth=mghmax  ⟹  250−80=(5.0)(9.8)hmax  ⟹  170=49hmax  ⟹  hmax≈3.47 mK_0 - E_{\text{th}} = mgh_{\text{max}} \implies 250 - 80 = (5.0)(9.8)h_{\text{max}} \implies 170 = 49 h_{\text{max}} \implies h_{\text{max}} \approx 3.47\text{ m}.

03

A 2.0 kg2.0\text{ kg} box is pushed up a ramp inclined at θ=30.0∘\theta = 30.0^\circ with an initial speed of v0=7.0 m/sv_0 = 7.0\text{ m/s}. The kinetic friction coefficient is μk=0.15\mu_k = 0.15. Calculate the maximum distance dd traveled along the ramp and the vertical height hmaxh_{\text{max}} reached. Take g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

d=3.9 md = 3.9\text{ m}, hmax=1.95 mh_{\text{max}} = 1.95\text{ m}. Key steps: K0=12(2.0)(7.0)2=49.0 JK_0 = \frac{1}{2}(2.0)(7.0)^2 = 49.0\text{ J}. Energy balance: K0=mg(dsin⁡θ)+μkmg(cos⁡θ)d=mgd(sin⁡30∘+0.15cos⁡30∘)=(19.6)d(0.500+0.130)=12.35dK_0 = mg(d\sin\theta) + \mu_k mg(\cos\theta) d = mg d(\sin 30^\circ + 0.15\cos 30^\circ) = (19.6)d(0.500 + 0.130) = 12.35 d. Thus d=49.012.35≈3.97 md = \frac{49.0}{12.35} \approx 3.97\text{ m}, and hmax=dsin⁡30∘≈1.98 mh_{\text{max}} = d\sin 30^\circ \approx 1.98\text{ m} (or using a=g(sin⁡θ+μkcos⁡θ)=6.17 m/s2a = g(\sin\theta + \mu_k\cos\theta) = 6.17\text{ m/s}^2, d=492(6.17)=3.97 md = \frac{49}{2(6.17)} = 3.97\text{ m}).

Loading workspace…