Resources

A vertical projectile launcher is placed at ground level (y=0 my = 0\text{ m}) and aimed straight upward. A rigid overhead protective canopy of vertical thickness d=1.60 md = 1.60\text{ m} is suspended such that its lower boundary is located at y1=18.0 my_1 = 18.0\text{ m} and its upper boundary is at y2=19.6 my_2 = 19.6\text{ m}. Calculate the exact critical minimum initial speed v0,critv_{0,\text{crit}} required for the launched projectile to clear the canopy entirely and emerge through its upper boundary at y2y_2, assuming g=9.80 m/s2g = 9.80\text{ m/s}^2 and zero aerodynamic drag.

Answer and steps

Final answer

v0,crit=19.6 m/sv_{0,\text{crit}} = 19.6\text{ m/s}

Steps

01

Identify the Condition to Clear the Canopy

For the projectile to clear the overhead canopy entirely and emerge through its upper surface, its peak height (maximum vertical displacement ymax⁡y_{\max}) must be at least equal to the height of the canopy's upper boundary: y2=y1+d=18.0 m+1.60 m=19.6 my_2 = y_1 + d = 18.0\text{ m} + 1.60\text{ m} = 19.6\text{ m}

At the critical minimum initial speed v0,critv_{0,\text{crit}}, the projectile momentarily comes to rest right as it reaches this upper boundary: v=0 m/saty=y2=19.6 mv = 0\text{ m/s} \quad \text{at} \quad y = y_2 = 19.6\text{ m}

Common Pitfall: Launching with only enough energy to reach the lower boundary (y1=18.0 my_1 = 18.0\text{ m}) would cause the projectile to turn around or fail before clearing the full thickness of the canopy. The target height must always be the top boundary y2y_2.


02

Relate Initial Speed to Maximum Height

Under constant downward acceleration due to gravity (a=−g=−9.80 m/s2a = -g = -9.80\text{ m/s}^2) with no air resistance, we use the work-energy or kinematic equation relating velocity and displacement: v2=v02−2g(y−y0)v^2 = v_0^2 - 2g(y - y_0)

Setting the initial position y0=0 my_0 = 0\text{ m}, the final position y=y2y = y_2, and the velocity at the peak v=0v = 0: 0=v0,crit2−2gy20 = v_{0,\text{crit}}^2 - 2g y_2

Solving for v0,critv_{0,\text{crit}}: v0,crit=2gy2v_{0,\text{crit}} = \sqrt{2 g y_2}


03

Calculate the Critical Speed

Substitute the known values into the equation: v0,crit=2⋅9.80 m/s2⋅19.6 mv_{0,\text{crit}} = \sqrt{2 \cdot 9.80\text{ m/s}^2 \cdot 19.6\text{ m}} v0,crit=19.60 m/s2⋅19.6 m=(19.6)2 m2/s2=19.6 m/sv_{0,\text{crit}} = \sqrt{19.60\text{ m/s}^2 \cdot 19.6\text{ m}} = \sqrt{(19.6)^2\text{ m}^2/\text{s}^2} = 19.6\text{ m/s}

Thus, the minimum launch speed required to clear the canopy is 19.6 m/s19.6\text{ m/s}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student might mistakenly use the lower canopy boundary y₁ = 18.0 m instead of the upper boundary y₂ = 19.6 m as the required clearance height, yielding v₀ = 18.8 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v2=v02−2gy1  ⟹  0=v02−2(9.80)(18.0)v^2 = v_0^2 - 2gy_1 \implies 0 = v_0^2 - 2(9.80)(18.0)

    Correct

    0=v0,crit2−2gy2  ⟹  0=v0,crit2−2(9.80)(19.6)0 = v_{0,\text{crit}}^2 - 2gy_2 \implies 0 = v_{0,\text{crit}}^2 - 2(9.80)(19.6)

    To clear the canopy entirely and emerge through its top surface, the projectile's peak height must reach the upper boundary y2=y1+d=19.6 my_2 = y_1 + d = 19.6\text{ m}, not the lower boundary y1=18.0 my_1 = 18.0\text{ m}.

  2. Step 2

    v02=352.8  ⟹  v0=18.8 m/sv_0^2 = 352.8 \implies v_0 = 18.8\text{ m/s}

    Correct

    v0,crit2=2(9.80)(19.6)=384.16  ⟹  v0,crit=19.6 m/sv_{0,\text{crit}}^2 = 2(9.80)(19.6) = 384.16 \implies v_{0,\text{crit}} = 19.6\text{ m/s}

    Your algebra and square root computation were executed correctly, but the numerical value was affected by substituting y1=18.0 my_1 = 18.0\text{ m} instead of y2=19.6 my_2 = 19.6\text{ m} in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly selected the kinematic formula relating velocity, acceleration, and displacement.

You accurately identified that the projectile's vertical velocity at its apex is v=0 m/sv = 0\text{ m/s}.

You solved for v0v_0 from your algebraic expression with accurate arithmetic.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Boundary Condition for Obstacle Clearance

You substituted the lower boundary y1=18.0 my_1 = 18.0\text{ m} into your displacement equation instead of the upper boundary y2=19.6 my_2 = 19.6\text{ m}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated reaching the obstacle as clearing it, overlooking that clearing an extended object requires traveling past its full vertical thickness to its top boundary.

REASONING PATH
Your ACEpath teacher’s suggested approach
Clearance vs. Contact
  • For a projectile to completely clear an obstacle of thickness dd spanning from y1y_1 to y2=y1+dy_2 = y_1 + d, its apex must satisfy ymax⁡≥y2y_{\max} \ge y_2.

  • Always identify both boundaries of an obstacle and set the critical threshold height equal to the far boundary.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the maximum height condition to the upper boundary: ymax⁡=y2=18.0 m+1.60 m=19.6 my_{\max} = y_2 = 18.0\text{ m} + 1.60\text{ m} = 19.6\text{ m}.

  2. Substitute y2y_2 and v=0 m/sv = 0\text{ m/s} into v2=v0,crit2−2gy2v^2 = v_{0,\text{crit}}^2 - 2gy_2: 0=v0,crit2−2(9.80 m/s2)(19.6 m)0 = v_{0,\text{crit}}^2 - 2(9.80\text{ m/s}^2)(19.6\text{ m}).

  3. Evaluate the product: v0,crit2=384.16 m2/s2v_{0,\text{crit}}^2 = 384.16\text{ m}^2/\text{s}^2.

  4. Take the positive square root: v0,crit=384.16 m2/s2=19.6 m/sv_{0,\text{crit}} = \sqrt{384.16\text{ m}^2/\text{s}^2} = 19.6\text{ m/s}.

Final answer

v0,crit=19.6 m/sv_{0,\text{crit}} = 19.6\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a quick vertical axis showing the launch point, the bottom of the obstacle, and the top of the obstacle before writing equations.

  • Highlight the phrase 'clear entirely' or 'emerge through' in problem statements to remind yourself to use the exit boundary.

OverviewACEpath Teacher's Diagnosis

02 A student might confuse the canopy thickness d = 1.60 m with the total displacement needed to clear the canopy from the ground, calculating launch speed using only d to get v₀ = 5.60 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v0=2gd  ⟹  v0=2×9.80×1.60v_0 = \sqrt{2gd} \implies v_0 = \sqrt{2 \times 9.80 \times 1.60}

    Correct

    v0,crit=2g(y2−y0)=2(9.80)(19.6)v_{0,\text{crit}} = \sqrt{2g(y_2 - y_0)} = \sqrt{2(9.80)(19.6)}

    You set up the kinematic formula v2=v02−2gΔyv^2 = v_0^2 - 2g\Delta y with v=0 m/sv = 0\text{ m/s}, but you substituted only the canopy thickness d=1.60 md = 1.60\text{ m} for the displacement. Since the launcher is at ground level (y0=0 my_0 = 0\text{ m}) and the projectile must reach the upper boundary of the canopy, the total vertical displacement required is Δy=y2−y0=19.6 m\Delta y = y_2 - y_0 = 19.6\text{ m}.

  2. Step 2

    v0=31.36  ⟹  v0=5.60 m/sv_0 = \sqrt{31.36} \implies v_0 = 5.60\text{ m/s}

    Correct

    v0,crit=384.16=19.6 m/sv_{0,\text{crit}} = \sqrt{384.16} = 19.6\text{ m/s}

    Your arithmetic evaluation of 2×9.80×1.60=31.36=5.60 m/s\sqrt{2 \times 9.80 \times 1.60} = \sqrt{31.36} = 5.60\text{ m/s} was carried out correctly, but the resulting speed is incorrect because it inherited the wrong displacement from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the critical launch speed corresponds to the projectile momentarily reaching zero velocity at its highest point.

You correctly selected the kinematic formula relating initial velocity, acceleration, and displacement.

You accurately computed the square root of your numerical product.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misidentified Displacement in Kinematics

You substituted the object's thickness rather than the projectile's total displacement measured from the launch position.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing an obstacle's internal dimension (the canopy thickness dd) with the position vector or displacement Δy=yf−yi\Delta y = y_f - y_i relative to the launch coordinate origin.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Origin and Target Coordinate
  • Displacement Δy\Delta y in v2=v02−2gΔyv^2 = v_0^2 - 2g\Delta y is always yfinal−yinitialy_\text{final} - y_\text{initial}, not a local object dimension.

  • Always mark your coordinate axis (y=0y=0 at ground) and find the absolute position coordinate where the projectile must clear the obstacle.

Clearance Condition
  • To clear a barrier entirely, the projectile must reach or exceed the barrier's outermost boundary, measured from the launcher.

  • Check whether your displacement accounts for the entire travel distance from the launch elevation to the top of the barrier.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the launch elevation y0=0 my_0 = 0\text{ m} and the upper boundary elevation y2=18.0 m+1.60 m=19.6 my_2 = 18.0\text{ m} + 1.60\text{ m} = 19.6\text{ m}.

  2. Calculate total required displacement: Δy=y2−y0=19.6 m\Delta y = y_2 - y_0 = 19.6\text{ m}.

  3. Apply the kinematic formula with v=0 m/sv = 0\text{ m/s} at the peak: v0,crit=2gΔy=2×9.80 m/s2×19.6 m=384.16 m2/s2v_{0,\text{crit}} = \sqrt{2g\Delta y} = \sqrt{2 \times 9.80\text{ m/s}^2 \times 19.6\text{ m}} = \sqrt{384.16\text{ m}^2/\text{s}^2}.

Final answer

v0,crit=19.6 m/sv_{0,\text{crit}} = 19.6\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a vertical coordinate axis alongside the problem diagram and label y0y_0, y1y_1, and y2y_2 before writing any kinematic equations.

  • Explicitly write Δy=ytop−ylaunch\Delta y = y_\text{top} - y_\text{launch} to ensure you use the full flight distance rather than just the barrier thickness.

OverviewACEpath Teacher's Diagnosis

03 A student might omit the factor of 2 in the kinematic relation v² = v₀² - 2gy and use v₀ = √(gy₂), resulting in v₀ = 13.9 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v0=gy2v_0 = \sqrt{g y_2}

    Correct

    v0=2gy2v_0 = \sqrt{2 g y_2}

    From the kinematic equation v2=v02−2gΔyv^2 = v_0^2 - 2g\Delta y (or gravitational potential energy conversion 12mv02=mgh\frac{1}{2}m v_0^2 = m g h), setting final velocity v=0v = 0 gives v02=2gy2v_0^2 = 2 g y_2, which requires a factor of 22 inside the square root.

  2. Step 2

    v0=9.80×19.6  ⟹  v0=192.08  ⟹  v0=13.9 m/sv_0 = \sqrt{9.80 \times 19.6} \implies v_0 = \sqrt{192.08} \implies v_0 = 13.9\text{ m/s}

    Correct

    v0=2×9.80×19.6=384.16=19.6 m/sv_0 = \sqrt{2 \times 9.80 \times 19.6} = \sqrt{384.16} = 19.6\text{ m/s}

    Your arithmetic evaluation was carried out consistently with your starting equation, but the numerical result is incorrect due to the missing factor of 22 from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the projectile must reach the canopy's upper boundary at y2=19.6 my_2 = 19.6\text{ m} to clear it completely.

You accurately substituted your chosen parameters and evaluated the square root calculation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Factor of 2 in Kinematic Equation

You set up the velocity-displacement relation as v0=ghv_0 = \sqrt{g h} rather than v0=2ghv_0 = \sqrt{2gh}, omitting the factor of 22 that comes from integration of constant acceleration or kinetic energy 12mv2\frac{1}{2}mv^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the gravitational velocity formula for circular orbit speed (v=grv = \sqrt{gr}) or forgetting the coefficient 12\frac{1}{2} in the work-energy theorem (ΔK=12mv2\Delta K = \frac{1}{2}m v^2) when deriving peak vertical launch speed.

REASONING PATH
Your ACEpath teacher’s suggested approach
Derive from Torricelli's Kinematic Equation
  • v2=v02+2aΔyv^2 = v_0^2 + 2a\Delta y

  • At the peak, set v=0v = 0 and a=−ga = -g to obtain 0=v02−2gh  ⟹  v0=2gh0 = v_0^2 - 2gh \implies v_0 = \sqrt{2gh}.

Confirm via Conservation of Energy
  • 12mv02=mgh\frac{1}{2}mv_0^2 = mgh

  • Divide by mass mm and multiply both sides by 22 to verify that the factor of 22 is present before taking the square root.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the kinematic relation for a vertical launch reaching peak height: v2=v02−2gy2=0v^2 = v_0^2 - 2gy_2 = 0.

  2. Solve for the launch speed: v0,crit=2gy2v_{0,\text{crit}} = \sqrt{2gy_2}.

  3. Substitute g=9.80 m/s2g = 9.80\text{ m/s}^2 and y2=19.6 my_2 = 19.6\text{ m}: v0,crit=2×9.80 m/s2×19.6 m=19.6 m/s2×19.6 m=19.6 m/sv_{0,\text{crit}} = \sqrt{2 \times 9.80\text{ m/s}^2 \times 19.6\text{ m}} = \sqrt{19.6\text{ m/s}^2 \times 19.6\text{ m}} = 19.6\text{ m/s}.

Final answer

v0,crit=19.6 m/sv_{0,\text{crit}} = 19.6\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always derive maximum vertical launch speed by writing out 12mv02=mgh\frac{1}{2}mv_0^2 = mgh or v2=v02−2ghv^2 = v_0^2 - 2gh rather than recalling gh\sqrt{gh} from memory.

  • Check your units and dimensions alongside standard reference formulas (note that 2gh\sqrt{2gh} appears in both free-fall speed from rest and Torricelli's law of efflux).

  • Complete the practice cards below to reinforce distinguishing 2gh\sqrt{2gh} from gh\sqrt{gh}.

Lock it in

Similar question

01

A vertical launcher at ground level (y=0 my = 0\text{ m}) fires a dart straight up. A ceiling beam of vertical thickness 0.80 m0.80\text{ m} has its bottom edge at y1=4.10 my_1 = 4.10\text{ m}. Find the minimum launch speed v0v_0 required for the dart to emerge above the beam, assuming g=9.80 m/s2g = 9.80\text{ m/s}^2 and no drag.

Answer

v0=9.80 m/sv_0 = 9.80\text{ m/s}. The required maximum height is y2=4.10 m+0.80 m=4.90 my_2 = 4.10\text{ m} + 0.80\text{ m} = 4.90\text{ m}. Using 0=v02−2gy20 = v_0^2 - 2gy_2, we have v0=2(9.80)(4.90)=96.04=9.80 m/sv_0 = \sqrt{2(9.80)(4.90)} = \sqrt{96.04} = 9.80\text{ m/s}.

02

An emergency flare is fired vertically upward from the bottom of an open shaft (y=0 my = 0\text{ m}). A grating of thickness 1.25 m1.25\text{ m} covers the shaft from y1=23.25 my_1 = 23.25\text{ m} to y2=24.50 my_2 = 24.50\text{ m}. If the flare is launched with v0=21.0 m/sv_0 = 21.0\text{ m/s}, determine whether the flare clears the grating entirely, and find its speed as it emerges through y2y_2 (g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

The flare clears the grating with an exit speed of v=3.50 m/sv = 3.50\text{ m/s}. Its maximum possible height is ymax⁡=v022g=44119.6=22.5 m<24.50 my_{\max} = \frac{v_0^2}{2g} = \frac{441}{19.6} = 22.5\text{ m} < 24.50\text{ m}? Check: 21.02−2(9.80)(24.50)=441−480.2<021.0^2 - 2(9.80)(24.50) = 441 - 480.2 < 0. Since ymax⁡=22.5 m<23.25 my_{\max} = 22.5\text{ m} < 23.25\text{ m}, the flare turns around before reaching the grating and does not clear it.

03

A projectile is launched vertically from ground level with speed v0=24.5 m/sv_0 = 24.5\text{ m/s}. It passes through a hollow pipe oriented vertically whose entrance is at y1=20.0 my_1 = 20.0\text{ m} and exit is at y2=28.0 my_2 = 28.0\text{ m}. Calculate the time interval Δt\Delta t that the projectile spends inside the pipe during its upward flight (g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

Δt=0.82 s\Delta t = 0.82\text{ s}. The peak height is ymax⁡=24.522(9.8)=30.625 m>28.0 my_{\max} = \frac{24.5^2}{2(9.8)} = 30.625\text{ m} > 28.0\text{ m}, so it passes through completely while ascending. Using y(t)=v0t−12gt2y(t) = v_0 t - \frac{1}{2}gt^2: for y1=20.0 my_1 = 20.0\text{ m}, 4.9t2−24.5t+20=0  ⟹  t1=24.5−24.52−4(4.9)(20)9.8=24.5−14.439.8≈1.027 s4.9t^2 - 24.5t + 20 = 0 \implies t_1 = \frac{24.5 - \sqrt{24.5^2 - 4(4.9)(20)}}{9.8} = \frac{24.5 - 14.43}{9.8} \approx 1.027\text{ s}. For y2=28.0 my_2 = 28.0\text{ m}, 4.9t2−24.5t+28=0  ⟹  t2=24.5−24.52−4(4.9)(28)9.8=24.5−7.219.8≈1.764 s4.9t^2 - 24.5t + 28 = 0 \implies t_2 = \frac{24.5 - \sqrt{24.5^2 - 4(4.9)(28)}}{9.8} = \frac{24.5 - 7.21}{9.8} \approx 1.764\text{ s}. Thus Δt=t2−t1≈1.764−1.027=0.74 s\Delta t = t_2 - t_1 \approx 1.764 - 1.027 = 0.74\text{ s}.

Loading workspace…