Resources

A finite solenoid has radius R=3.00 cmR = 3.00\text{ cm}, length LL, and winding density n=1200 turns/mn = 1200\text{ turns/m} carrying current I=2.50 AI = 2.50\text{ A}. The axial magnetic field along the center line zz from an end is given by the finite Biot-Savart integration: B(z)=12μ0nI(cos⁡θ2−cos⁡θ1)B(z) = \frac{1}{2}\mu_0 n I (\cos\theta_2 - \cos\theta_1), where θ1\theta_1 and θ2\theta_2 are the angles subtended by the apertures of the two ends. (a) In the asymptotic limit where the solenoid becomes semi-infinite (L→∞L \to \infty), show mathematically and calculate the numerical field magnitude BendB_{\text{end}} exactly at the center of the aperture plane at one end (z=0z = 0). (b) Compare BendB_{\text{end}} to the central field B0B_0 of an infinitely long solenoid with the same parameters by evaluating the ratio Bend/B0B_{\text{end}}/B_0. (c) Explain physically how the geometric spreading and divergence of magnetic field lines as they emerge into the surrounding half-space dictates this exact numerical fraction.

Answer and steps

Final answer

(a) Bend=12μ0nI=1.88×10−3 TB_{\text{end}} = \frac{1}{2}\mu_0 n I = 1.88\times 10^{-3}\text{ T}; (b) BendB0=0.500\frac{B_{\text{end}}}{B_0} = 0.500 (exactly 50.0%50.0\%); (c) By symmetry, two identical semi-infinite solenoids joined end-to-end form an infinite solenoid with field B0B_0; each half must contribute equally to the axial field at their junction, so field lines diverge into the exterior 2π2\pi steradian half-space, halving the axial line density.

Steps

Part (a): Mathematical Derivation and Numerical Value of BendB_{\text{end}}

  1. Geometry and Angles at the Aperture (z=0z = 0): Consider the aperture plane of the solenoid at z=0z = 0, with the body of the solenoid extending along the positive zz-axis from z=0z = 0 to z=L→∞z = L \to \infty.

    • The angle θ\theta measures the direction from the field point on the axis to the perimeter of a circular current element:
      • For the end directly at the field point (z=0z = 0), the circular rim lies entirely in the transverse plane, so the subtended angle is: θ1=90∘  ⟹  cos⁡θ1=0\theta_1 = 90^\circ \implies \cos\theta_1 = 0
      • For the distant end as L→∞L \to \infty, the radius RR is negligible compared to the infinite distance, so the rim lies along the axis: θ2=0∘  ⟹  cos⁡θ2=1\theta_2 = 0^\circ \implies \cos\theta_2 = 1
  2. Evaluating the Axial Magnetic Field: Substitute these limits into the Biot-Savart axial formula: Bend=12μ0nI(cos⁡0∘−cos⁡90∘)=12μ0nI(1−0)=12μ0nIB_{\text{end}} = \frac{1}{2}\mu_0 n I (\cos 0^\circ - \cos 90^\circ) = \frac{1}{2}\mu_0 n I (1 - 0) = \frac{1}{2}\mu_0 n I
  3. Numerical Evaluation: Using μ0=4π×10−7 T⋅m/A\mu_0 = 4\pi \times 10^{-7}\text{ T}\cdot\text{m/A}, n=1200 turns/mn = 1200\text{ turns/m}, and I=2.50 AI = 2.50\text{ A}: Bend=12(4π×10−7 T⋅m/A)(1200 m−1)(2.50 A)B_{\text{end}} = \frac{1}{2} (4\pi \times 10^{-7}\text{ T}\cdot\text{m/A})(1200\text{ m}^{-1})(2.50\text{ A}) Bend=6π×10−4 T≈1.88×10−3 TB_{\text{end}} = 6\pi \times 10^{-4}\text{ T} \approx 1.88 \times 10^{-3}\text{ T}

Part (b): Comparison with the Field of an Infinite Solenoid

The ideal magnetic field deep inside an infinitely long solenoid is: B0=μ0nIB_0 = \mu_0 n I

Taking the ratio of the field at the end of a semi-infinite solenoid to the interior field of an infinite solenoid gives: BendB0=12μ0nIμ0nI=12=0.500(50.0%)\frac{B_{\text{end}}}{B_0} = \frac{\frac{1}{2}\mu_0 n I}{\mu_0 n I} = \frac{1}{2} = 0.500 \quad (50.0\%)


Part (c): Physical Explanation via Symmetry and Field-Line Divergence

  1. Superposition and Reflectional Symmetry: An infinitely long solenoid can be viewed as two identical semi-infinite solenoids joined end-to-end at an aperture plane. By axial symmetry and linearity (the principle of superposition), each half must contribute an equal magnetic field at the junction plane: Binfinite=Bleft half+Bright half=2Bsemi-infinite  ⟹  Bsemi-infinite=12B0B_{\text{infinite}} = B_{\text{left half}} + B_{\text{right half}} = 2 B_{\text{semi-infinite}} \implies B_{\text{semi-infinite}} = \frac{1}{2} B_0
  2. Divergence and Geometric Spreading of Field Lines:

    • Deep inside the infinite solenoid, all field lines are straight, parallel, and confined to the cylinder of radius RR, maintaining a constant magnetic flux density B0B_0.
    • When one half is removed to create a semi-infinite solenoid, the field lines are no longer confined by opposing winding segments ahead of them. Upon reaching the open aperture, the lines spread outward into the surrounding 2π steradians2\pi\text{ steradians} (the exterior half-space).
    • Because Gauss's Law for magnetism (∇⋅B⃗=0\nabla \cdot \vec{B} = 0) requires magnetic flux to be continuous, this lateral spreading begins inside the coil and halves the density of magnetic field lines crossing the axial aperture plane compared to the deep interior.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the subtended angle at the end aperture with 0° rather than 90°, leading to an evaluated field of zero.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    θ1=0∘,θ2=0∘\theta_1 = 0^\circ, \theta_2 = 0^\circ

    Correct

    θ1=90∘,θ2=0∘\theta_1 = 90^\circ, \theta_2 = 0^\circ

    At the aperture plane (z=0z = 0), the position vector from the axial observation point to the perimeter of the circular loop lies entirely in the transverse plane, which makes an angle of θ1=90∘\theta_1 = 90^\circ with the axis.

  2. Step 2

    Bend=(12)μ0nI(cos⁡0∘−cos⁡0∘)  ⟹  Bend=(12)μ0nI(1−1)=0 TB_{\text{end}} = \left(\frac{1}{2}\right) \mu_0 n I (\cos 0^\circ - \cos 0^\circ) \implies B_{\text{end}} = \left(\frac{1}{2}\right) \mu_0 n I (1 - 1) = 0\text{ T}

    Correct

    Bend=12μ0nI(cos⁡0∘−cos⁡90∘)=12μ0nI≈1.88×10−3 TB_{\text{end}} = \frac{1}{2}\mu_0 n I (\cos 0^\circ - \cos 90^\circ) = \frac{1}{2}\mu_0 n I \approx 1.88 \times 10^{-3}\text{ T}

    Because θ1\theta_1 was set to 0∘0^\circ instead of 90∘90^\circ, the difference cos⁡θ2−cos⁡θ1\cos\theta_2 - \cos\theta_1 evaluated to zero instead of 1−0=11 - 0 = 1.

  3. Step 3

    B0=μ0nI  ⟹  BendB0=0μ0nI=0B_0 = \mu_0 n I \implies \frac{B_{\text{end}}}{B_0} = \frac{0}{\mu_0 n I} = 0

    Correct

    BendB0=12μ0nIμ0nI=0.500\frac{B_{\text{end}}}{B_0} = \frac{\frac{1}{2}\mu_0 n I}{\mu_0 n I} = 0.500

    Using the correct aperture field gives the ratio BendB0=12\frac{B_{\text{end}}}{B_0} = \frac{1}{2}.

  4. Step 4

    All magnetic field lines diverge radially outward before reaching the end, so no axial field remains at the aperture center.

    Correct

    By superposition, two semi-infinite solenoids joined end-to-end form an infinite solenoid (B0=2BendB_0 = 2 B_{\text{end}}), so each semi-infinite half contributes exactly half the flux density (Bend=12B0B_{\text{end}} = \frac{1}{2}B_0) as lines spread into the exterior 2π2\pi steradian half-space.

    Magnetic field lines form continuous closed loops without sources or sinks (∇⋅B⃗=0\nabla \cdot \vec{B} = 0). They do not completely exit radially prior to the end; exactly half of the central flux density crosses through the aperture plane before spreading into the external half-space.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated the Biot-Savart axial field expression for a finite solenoid.

You correctly identified the interior field formula B0=μ0nIB_0 = \mu_0 n I for an ideal infinite solenoid.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Angle geometric convention error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You interpreted the angle θ1\theta_1 subtended by the opening loop at z=0z = 0 as pointing along the axis (0∘0^\circ) rather than in the transverse radial plane (90∘90^\circ), which caused the cosine difference to vanish identically.

REASONING PATH
Your ACEpath teacher’s suggested approach
Subtended Angle at the Aperture Rim
  • The subtended angle θ\theta is measured between the central cylinder axis and the line connecting the observation point to the rim of a circular loop. At the center of a loop (z=0z = 0), the rim lies perpendicular to the axis: θ=90∘\theta = 90^\circ and cos⁡90∘=0\cos 90^\circ = 0.

  • Always draw a right triangle with base zz and height RR. Check that cos⁡θ=zz2+R2\cos\theta = \frac{z}{\sqrt{z^2 + R^2}}, which gives cos⁡θ=0\cos\theta = 0 at z=0z = 0 and cos⁡θ→1\cos\theta \to 1 as z→∞z \to \infty.

Superposition of Semi-Infinite Solenoids
  • An infinite solenoid is the end-to-end union of two identical semi-infinite solenoids: Binfinite=Bsemi-infinite+Bsemi-infinite=2BendB_{\text{infinite}} = B_{\text{semi-infinite}} + B_{\text{semi-infinite}} = 2 B_{\text{end}}.

  • Use symmetry to cross-check asymptotic values: since the interior of an infinite solenoid is μ0nI\mu_0 n I, the field at the mouth of a semi-infinite solenoid must be exactly 12μ0nI\frac{1}{2}\mu_0 n I.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the aperture boundary angles: for the opening right at z=0z = 0, θ1=90∘\theta_1 = 90^\circ (so cos⁡90∘=0\cos 90^\circ = 0); for the distant end as L→∞L \to \infty, θ2=0∘\theta_2 = 0^\circ (so cos⁡0∘=1\cos 0^\circ = 1).

  2. Substitute into the Biot-Savart formula: Bend=12μ0nI(1−0)=12μ0nIB_{\text{end}} = \frac{1}{2}\mu_0 n I (1 - 0) = \frac{1}{2}\mu_0 n I.

  3. Evaluate numerically: Bend=12(4π×10−7 T⋅m/A)(1200 m−1)(2.50 A)=6π×10−4 T≈1.88×10−3 TB_{\text{end}} = \frac{1}{2}(4\pi \times 10^{-7}\text{ T}\cdot\text{m/A})(1200\text{ m}^{-1})(2.50\text{ A}) = 6\pi \times 10^{-4}\text{ T} \approx 1.88 \times 10^{-3}\text{ T}.

  4. Compute the ratio: BendB0=12μ0nIμ0nI=0.500\frac{B_{\text{end}}}{B_0} = \frac{\frac{1}{2}\mu_0 n I}{\mu_0 n I} = 0.500 (50.0%50.0\%).

Final answer

(a) Bend=12μ0nI≈1.88×10−3 TB_{\text{end}} = \frac{1}{2}\mu_0 n I \approx 1.88 \times 10^{-3}\text{ T}; (b) BendB0=0.500\frac{B_{\text{end}}}{B_0} = 0.500; (c) Joining two semi-infinite solenoids forms an infinite solenoid, so each half contributes half the axial field (50%50\%) at the junction plane.

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the right triangle relating distance zz, radius RR, and angle θ\theta to avoid substituting 0∘0^\circ at an aperture rim.

  • Check finite solenoid limits against the superposition argument: an infinite solenoid cut in half must yield 12B0\frac{1}{2} B_0 at the cut.

  • Review magnetic flux continuity (∇⋅B⃗=0\nabla \cdot \vec{B} = 0) to see why field lines fan out into a hemisphere rather than vanishing.

OverviewACEpath Teacher's Diagnosis

02 The student assumes the field at the end of a semi-infinite solenoid is already the full infinite solenoid field mu_0 * n * I.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Since L→∞, the solenoid is treated as infinitely long.  ⟹  θ1=180∘, θ2=0∘\text{Since } L \to \infty\text{, the solenoid is treated as infinitely long.} \implies \theta_1 = 180^\circ,\, \theta_2 = 0^\circ

    Correct

    θ1=90∘, θ2=0∘\theta_1 = 90^\circ,\, \theta_2 = 0^\circ

    You set θ1=180∘\theta_1 = 180^\circ, which represents a coil extending to −∞-\infty behind the observation point. Because the solenoid starts at the aperture plane z=0z = 0, the circular turns right at that boundary lie in the transverse plane and subtend an angle of θ1=90∘\theta_1 = 90^\circ ($ \cosθ\theta1 = 0$).

  2. Step 2

    Bend=12μ0nI(1−(−1))=μ0nI  ⟹  Bend=(4π×10−7)(1200)(2.50)=3.77×10−3 TB_{\text{end}} = \frac{1}{2}\mu_0 n I (1 - (-1)) = \mu_0 n I \implies B_{\text{end}} = (4\pi \times 10^{-7})(1200)(2.50) = 3.77 \times 10^{-3}\text{ T}

    Correct

    Bend=12μ0nI(cos⁡0∘−cos⁡90∘)=12μ0nI≈1.88×10−3 TB_{\text{end}} = \frac{1}{2}\mu_0 n I (\cos 0^\circ - \cos 90^\circ) = \frac{1}{2}\mu_0 n I \approx 1.88 \times 10^{-3}\text{ T}

    You substituted your angles and carried out the arithmetic correctly, but your result is twice the true value due to the incorrect aperture angle θ1=180∘\theta_1 = 180^\circ.

  3. Step 3

    B0=μ0nI=3.77×10−3 T  ⟹  BendB0=1B_0 = \mu_0 n I = 3.77 \times 10^{-3}\text{ T} \implies \frac{B_{\text{end}}}{B_0} = 1

    Correct

    B0=μ0nI=3.77×10−3 T  ⟹  BendB0=12μ0nIμ0nI=0.500B_0 = \mu_0 n I = 3.77 \times 10^{-3}\text{ T} \implies \frac{B_{\text{end}}}{B_0} = \frac{\frac{1}{2}\mu_0 n I}{\mu_0 n I} = 0.500

    You correctly stated the interior field B0B_0, but using your overstated BendB_{\text{end}} produced a ratio of 11 instead of 12\frac{1}{2}.

  4. Step 4

    Because length is infinite, the field lines remain completely parallel and unspread all the way to the end aperture.\text{Because length is infinite, the field lines remain completely parallel and unspread all the way to the end aperture.}

    Correct

    By superposition, two semi-infinite solenoids joined at z=0 produce B0, so one contributes exactly 12B0. At the open boundary, field lines spread into the exterior 2π steradians, halving the axial line density.\text{By superposition, two semi-infinite solenoids joined at } z = 0 \text{ produce } B_0\text{, so one contributes exactly } \frac{1}{2}B_0\text{. At the open boundary, field lines spread into the exterior } 2\pi\text{ steradians, halving the axial line density.}

    You assumed field lines remain confined and parallel at the aperture. In reality, with no windings past z=0z = 0, field lines flare laterally into the exterior open half-space, which halves the flux density right at the face.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and calculated the ideal interior magnetic field B0=μ0nIB_0 = \mu_0 n I.

You accurately carried out numerical evaluations using the standard value of μ0\mu_0.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Boundary Condition Angle Misidentification

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated a semi-infinite solenoid observed at its terminal aperture (z=0z = 0) with a fully infinite solenoid spanning from −∞-\infty to +∞+\infty, assigning θ1=180∘\theta_1 = 180^\circ instead of recognizing that the rim at the aperture plane lies at 90∘90^\circ to the axis.

REASONING PATH
Your ACEpath teacher’s suggested approach
Aperture angle at an open end
  • For a field point directly on the end face of a solenoid (z=0z = 0), the circular boundary loops lie in the transverse plane, meaning θ=90∘\theta = 90^\circ and cos⁡θ=0\cos\theta = 0.

  • Always draw a side-view cross-section showing the field point and the vector pointing to the coil's edge to read off the subtended angle directly.

Superposition of two semi-infinite halves
  • An infinite solenoid is the collinear sum of two identical semi-infinite solenoids meeting end-to-end: Binfinite=Bleft+Bright=2BendB_{\text{infinite}} = B_{\text{left}} + B_{\text{right}} = 2B_{\text{end}}.

  • Check your end field against the symmetry test: BendB_{\text{end}} must equal exactly 12B0\frac{1}{2}B_0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the aperture angle at the origin z=0z = 0: θ1=90∘\theta_1 = 90^\circ (so cos⁡θ1=0\cos\theta_1 = 0), and for the distant end as L→∞L \to \infty: θ2=0∘\theta_2 = 0^\circ (so cos⁡θ2=1\cos\theta_2 = 1).

  2. Evaluate Bend=12μ0nI(cos⁡0∘−cos⁡90∘)=12μ0nI=12(4π×10−7 T⋅m/A)(1200 m−1)(2.50 A)≈1.88×10−3 TB_{\text{end}} = \frac{1}{2}\mu_0 n I (\cos 0^\circ - \cos 90^\circ) = \frac{1}{2}\mu_0 n I = \frac{1}{2}(4\pi \times 10^{-7}\text{ T}\cdot\text{m/A})(1200\text{ m}^{-1})(2.50\text{ A}) \approx 1.88 \times 10^{-3}\text{ T}.

  3. Form the ratio with the uniform interior field: BendB0=12μ0nIμ0nI=0.500\frac{B_{\text{end}}}{B_0} = \frac{\frac{1}{2}\mu_0 n I}{\mu_0 n I} = 0.500.

  4. Explain that Gauss's law for magnetism (∇⋅B⃗=0\nabla \cdot \vec{B} = 0) requires the flux to diverge outwards into the unbounded 2π2\pi steradian forward half-space, cutting the axial density of field lines in half.

Final answer

(a) Bend=1.88×10−3 TB_{\text{end}} = 1.88 \times 10^{-3}\text{ T}; (b) BendB0=0.500\frac{B_{\text{end}}}{B_0} = 0.500; (c) Symmetry and divergence into the exterior half-space halve the axial flux density at the aperture.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice sketching the angle vectors from an axial evaluation point to the coil rims for both finite and semi-infinite solenoids.

  • Use the two-half superposition argument whenever validating boundary magnetic fields.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the ratio as B_0 / B_end instead of B_end / B_0.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    θ1=90∘,θ2=0∘  ⟹  Bend=12μ0nI(cos⁡0∘−cos⁡90∘)=12μ0nI  ⟹  Bend=0.5×(4π×10−7)×1200×2.50=1.88×10−3 T\theta_1 = 90^\circ, \theta_2 = 0^\circ \implies B_{\text{end}} = \frac{1}{2}\mu_0 n I (\cos 0^\circ - \cos 90^\circ) = \frac{1}{2}\mu_0 n I \implies B_{\text{end}} = 0.5 \times (4\pi \times 10^{-7}) \times 1200 \times 2.50 = 1.88 \times 10^{-3}\text{ T}

  2. Step 2

    B0=μ0nI  ⟹  B0Bend=μ0nI12μ0nI=2B_0 = \mu_0 n I \implies \frac{B_0}{B_{\text{end}}} = \frac{\mu_0 n I}{\frac{1}{2}\mu_0 n I} = 2

    Correct

    BendB0=12μ0nIμ0nI=12=0.500\frac{B_{\text{end}}}{B_0} = \frac{\frac{1}{2}\mu_0 n I}{\mu_0 n I} = \frac{1}{2} = 0.500

    The prompt asked for the ratio of the aperture field to the interior field, BendB0\frac{B_{\text{end}}}{B_0}. You inverted the fraction and calculated B0Bend=2\frac{B_0}{B_{\text{end}}} = 2 instead.

  3. Step 3

    "Field lines spread over twice the volume outside the solenoid compared to inside, so the ratio of fields is 2."

    Correct

    By superposition, two identical semi-infinite solenoids placed end-to-end form an infinite solenoid (B0=2BendB_0 = 2 B_{\text{end}}), so each half provides exactly half the total axial field (Bend=12B0B_{\text{end}} = \frac{1}{2}B_0). Field lines exiting the aperture flare out into the open 2π sr2\pi\text{ sr} half-space, cutting the axial line density by half.

    Magnetic field strength corresponds to local field line density (flux per unit area), not total volume. The factor of 12\frac{1}{2} arises from end-to-end superposition symmetry and lateral flux divergence into the exterior half-space.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the boundary angles θ1=90∘\theta_1 = 90^\circ and θ2=0∘\theta_2 = 0^\circ for the semi-infinite solenoid geometry.

You accurately substituted the physical constants and calculated the numerical value of BendB_{\text{end}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted ratio and incorrect flux spreading reasoning

You inverted the comparison ratio to compute B0Bend\frac{B_0}{B_{\text{end}}} rather than BendB0\frac{B_{\text{end}}}{B_0}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the numerator and denominator when translating the verbal comparison 'compare BendB_{\text{end}} to B0B_0' into a mathematical fraction, which led to a qualitative argument attempting to justify a factor of 22 rather than the physical fraction 12\frac{1}{2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Ratio Construction
  • When comparing quantity AA to reference quantity BB by evaluating the ratio, write AB\frac{A}{B}.

  • Check that the subject of comparison is placed in the numerator and the reference standard is in the denominator.

Superposition of Semi-Infinite Coils
  • An infinite solenoid is the linear combination of two identical semi-infinite solenoids joined end-to-end: Binfinite=Bleft+Bright=2BendB_{\text{infinite}} = B_{\text{left}} + B_{\text{right}} = 2 B_{\text{end}}.

  • Use reflectional symmetry and superposition at the boundary plane to justify why each half must supply exactly 50%50\% of the interior field.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the requested ratio with BendB_{\text{end}} in the numerator and B0B_0 in the denominator: BendB0=12μ0nIμ0nI\frac{B_{\text{end}}}{B_0} = \frac{\frac{1}{2}\mu_0 n I}{\mu_0 n I}.

  2. Simplify the fraction: BendB0=12=0.500\frac{B_{\text{end}}}{B_0} = \frac{1}{2} = 0.500.

  3. Explain the fraction physically: Joining two identical semi-infinite solenoids forms an infinite solenoid, so by superposition each half produces 12B0\frac{1}{2}B_0 at the joint. Without the second half, field lines diverge into the open half-space, halving the axial flux density.

Final answer

(a) Bend=1.88×10−3 TB_{\text{end}} = 1.88 \times 10^{-3}\text{ T}; (b) BendB0=0.500\frac{B_{\text{end}}}{B_0} = 0.500; (c) Joining two identical semi-infinite solenoids yields an infinite solenoid (B0=2BendB_0 = 2 B_{\text{end}}), so by symmetry each half contributes half the field at the aperture plane as lines diverge into the exterior half-space.

NEXT STEPS
Final Takeaways from Your Teacher
  • Pay close attention to which term belongs in the numerator when a question asks to compare AA to BB.

  • Practice using the end-to-end superposition argument to explain boundary magnetic fields.

Lock it in

Similar question

01

A solenoid of radius R=4.0 cmR = 4.0\text{ cm} and n=800 turns/mn = 800\text{ turns/m} carries current I=1.5 AI = 1.5\text{ A}. What is the axial magnetic field magnitude at the center of one of its end apertures if the solenoid is sufficiently long to be treated as semi-infinite?

Answer

Bend=12μ0nI=12(4π×10−7)(800)(1.5)≈7.54×10−4 TB_{\text{end}} = \frac{1}{2}\mu_0 n I = \frac{1}{2}(4\pi \times 10^{-7})(800)(1.5) \approx 7.54 \times 10^{-4}\text{ T}. Key steps: set θ1=90∘\theta_1 = 90^\circ and θ2=0∘\theta_2 = 0^\circ, giving Bend=12μ0nIB_{\text{end}} = \frac{1}{2}\mu_0 n I.

02

A point PP lies on the axis of a semi-infinite solenoid of radius RR at a distance d=Rd = R outside the open mouth (z=−Rz = -R). Find the ratio of the magnetic field B(P)B(P) to the deep interior field B0B_0.

Answer

B(P)B0=1−1/22≈0.146\frac{B(P)}{B_0} = \frac{1 - 1/\sqrt{2}}{2} \approx 0.146. Key steps: the far end has θ2=0∘\theta_2 = 0^\circ (cos⁡θ2=1\cos\theta_2 = 1), while the mouth at distance RR subtends cos⁡θ1=RR2+R2=12\cos\theta_1 = \frac{R}{\sqrt{R^2 + R^2}} = \frac{1}{\sqrt{2}}. Then B(P)=12B0(1−12)B(P) = \frac{1}{2}B_0(1 - \frac{1}{\sqrt{2}}).

03

A finite solenoid has radius RR and total length L=23RL = 2\sqrt{3}R. Using B(z)=12μ0nI(cos⁡θ2−cos⁡θ1)B(z) = \frac{1}{2}\mu_0 n I (\cos\theta_2 - \cos\theta_1), calculate the magnetic field BcenterB_{\text{center}} at the exact geometric center of the solenoid as a fraction of B0=μ0nIB_0 = \mu_0 n I.

Answer

Bcenter=32B0≈0.866B0B_{\text{center}} = \frac{\sqrt{3}}{2} B_0 \approx 0.866 B_0. Key steps: from the center, each end is at distance z=3Rz = \sqrt{3}R. The angle to each rim satisfies cos⁡θ=3R(3R)2+R2=32\cos\theta = \frac{\sqrt{3}R}{\sqrt{(\sqrt{3}R)^2 + R^2}} = \frac{\sqrt{3}}{2}. By symmetric Biot-Savart limits, B=12B0(32−(−32))=32B0B = \frac{1}{2}B_0(\frac{\sqrt{3}}{2} - (-\frac{\sqrt{3}}{2})) = \frac{\sqrt{3}}{2}B_0.

Loading workspace…