Resources

A standard laboratory centrifuge rotor spins at a constant rotational speed of 4200 rpm4200\text{ rpm}. A test tube is placed such that its sample tip is located at a radial distance of r=12.5 cmr = 12.5\text{ cm} from the central axis of rotation. Calculate (a) the angular speed ω\omega of the centrifuge rotor in radians per second (rad/s\text{rad/s}), and (b) the tangential linear speed vv of the sample tip in meters per second (m/s\text{m/s}). Round both answers to three significant figures.

Answer and steps

Final answer

(a) ω=440 rad/s\omega = 440\text{ rad/s}; (b) v=55.0 m/sv = 55.0\text{ m/s}

Steps

Part (a): Determine the Angular Speed ω\omega

  1. Understand the unit conversion: The rotational speed is given in revolutions per minute (rpm\text{rpm}).

    • One complete revolution corresponds to an angle of 2π radians2\pi\text{ radians}.
    • One minute equals 60 seconds60\text{ seconds}.
  2. Convert from rpm\text{rpm} to rad/s\text{rad/s}: ω=4200 rpm×2π rad1 rev×1 min60 s\omega = 4200\text{ rpm} \times \frac{2\pi\text{ rad}}{1\text{ rev}} \times \frac{1\text{ min}}{60\text{ s}} ω=4200⋅2π60=140π rad/s\omega = \frac{4200 \cdot 2\pi}{60} = 140\pi\text{ rad/s}
  3. Calculate the numerical value: ω≈140×3.14159≈439.82 rad/s\omega \approx 140 \times 3.14159 \approx 439.82\text{ rad/s} Rounding to three significant figures: ω≈440 rad/s\omega \approx 440\text{ rad/s}

Part (b): Determine the Tangential Speed vv

  1. Convert the radial distance to SI units: The radius must be expressed in meters (m\text{m}): r=12.5 cm=0.125 mr = 12.5\text{ cm} = 0.125\text{ m}
  2. Relate linear speed to angular speed: Every point on a rotating rigid body has a tangential linear speed vv proportional to its distance rr from the axis of rotation: v=ωrv = \omega r
  3. Calculate the linear speed: Using the exact angular speed value ω=140π rad/s\omega = 140\pi\text{ rad/s} to prevent intermediate rounding errors: v=(140π rad/s)⋅(0.125 m)=17.5π m/sv = (140\pi\text{ rad/s}) \cdot (0.125\text{ m}) = 17.5\pi\text{ m/s} v≈17.5×3.14159≈54.98 m/sv \approx 17.5 \times 3.14159 \approx 54.98\text{ m/s} Rounding to three significant figures: v≈55.0 m/sv \approx 55.0\text{ m/s}

Pitfall to avoid: Ensure the radius is converted from centimeters to meters before multiplying by ω\omega; using 12.512.5 directly would give a value in cm/s\text{cm/s} rather than m/s\text{m/s}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the radius from centimeters to meters, resulting in a linear speed that is too large by a factor of 100.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω=4200×2π60  ⟹  ω=140π≈440 rad/s\omega = \frac{4200 \times 2\pi}{60} \implies \omega = 140\pi \approx 440\text{ rad/s}

  2. Step 2

    v=rωv = r\omega

  3. Step 3

    v=12.5×440=5500 m/sv = 12.5 \times 440 = 5500\text{ m/s}

    Correct

    v=(0.125 m)(140π rad/s)≈55.0 m/sv = (0.125\text{ m})(140\pi\text{ rad/s}) \approx 55.0\text{ m/s}

    You substituted the radius as 12.5 cm12.5\text{ cm} directly into the equation instead of converting it to the SI unit of meters (0.125 m0.125\text{ m}). Multiplying centimeters by radians per second gives cm/s\text{cm/s}, not m/s\text{m/s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted 4200 rpm4200\text{ rpm} into 440 rad/s440\text{ rad/s} using the proper conversion factors for radians and seconds.

You correctly identified the formula v=rωv = r\omega connecting linear speed and angular speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing unit conversion

You forgot to convert the radius from centimeters to meters before evaluating the linear speed.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking unit consistency across kinematic equations, which requires length to be expressed in standard SI units (meters) to yield speed in meters per second.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check SI unit compatibility
  • In rotational kinematics formulas such as v=ωrv = \omega r and ac=ω2ra_c = \omega^2 r, standard SI units are required: ω\omega in rad/s\text{rad/s}, rr in m\text{m}, and vv in m/s\text{m/s}.

  • Always convert distances given in centimeters to meters by dividing by 100100 (r=12.5 cm=0.125 mr = 12.5\text{ cm} = 0.125\text{ m}) before multiplying.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the radius to meters: r=12.5 cm=0.125 mr = 12.5\text{ cm} = 0.125\text{ m}.

  2. Substitute r=0.125 mr = 0.125\text{ m} and ω=140π rad/s\omega = 140\pi\text{ rad/s} into v=rωv = r\omega.

  3. Compute the numerical value: v=0.125×140π=17.5π≈54.98 m/sv = 0.125 \times 140\pi = 17.5\pi \approx 54.98\text{ m/s}.

Final answer

(a) ω=440 rad/s\omega = 440\text{ rad/s}; (b) v=55.0 m/sv = 55.0\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out explicit units next to each substituted value to immediately spot mismatches like cm⋅rad/s≠m/s\text{cm} \cdot \text{rad/s} \neq \text{m/s}.

  • Perform a quick physical sanity check: 5500 m/s5500\text{ m/s} is roughly Mach 16, which is unrealistically high for a tabletop centrifuge rotor.

OverviewACEpath Teacher's Diagnosis

02 The student omits the factor of 2π when converting from rpm to rad/s, confusing revolutions per second with radians per second.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ω=420060=70.0 rad/s\omega = \frac{4200}{60} = 70.0\text{ rad/s}

    Correct

    ω=4200 rpm×2π rad1 rev×1 min60 s=140π rad/s≈440 rad/s\omega = 4200\text{ rpm} \times \frac{2\pi\text{ rad}}{1\text{ rev}} \times \frac{1\text{ min}}{60\text{ s}} = 140\pi\text{ rad/s} \approx 440\text{ rad/s}

    Dividing 42004200 by 6060 converts revolutions per minute to revolutions per second (rev/s\text{rev/s}), not radians per second. Because one complete revolution equals 2π radians2\pi\text{ radians}, you must multiply by 2π2\pi.

  2. Step 2

    r=0.125 mr = 0.125\text{ m}

  3. Step 3

    v=rω=0.125×70.0=8.75 m/sv = r\omega = 0.125 \times 70.0 = 8.75\text{ m/s}

    Correct

    v=rω=(0.125 m)(140π rad/s)≈55.0 m/sv = r\omega = (0.125\text{ m})(140\pi\text{ rad/s}) \approx 55.0\text{ m/s}

    Your formula v=rωv = r\omega and calculation were executed correctly using your previous value of ω\omega, but the final numerical value is off due to the missing factor of 2π2\pi in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the radius from centimeters into meters.

You chose the correct physical relationship v=rωv = r\omega to find linear speed from angular speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing conversion factor $2\pi$ (revolutions to radians)

You divided by 6060 to account for time, but treated 1 revolution1\text{ revolution} as 1 radian1\text{ radian} instead of 2π radians2\pi\text{ radians}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing rotational frequency ff (measured in revolutions per second, rev/s\text{rev/s} or Hz\text{Hz}) with angular speed ω\omega (measured in radians per second, rad/s\text{rad/s}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check angular unit definition
  • 1 rev=2π rad1\text{ rev} = 2\pi\text{ rad}

  • Whenever rotational speed is given in rpm\text{rpm}, convert by multiplying by 2π60\frac{2\pi}{60} to obtain rad/s\text{rad/s}.

Ensure unit compatibility before using $v = r\omega$
  • The linear formula v=rωv = r\omega strictly requires ω\omega to be expressed in rad/s\text{rad/s}.

  • Verify that ω\omega has units of rad/s\text{rad/s} before multiplying by rr.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert rotational speed to angular speed: ω=4200×2π60=140π rad/s≈440 rad/s\omega = \frac{4200 \times 2\pi}{60} = 140\pi\text{ rad/s} \approx 440\text{ rad/s}.

  2. Keep the standard unit radius: r=0.125 mr = 0.125\text{ m}.

  3. Calculate linear tangential speed: v=rω=(0.125 m)(140π rad/s)=17.5π m/s≈55.0 m/sv = r\omega = (0.125\text{ m})(140\pi\text{ rad/s}) = 17.5\pi\text{ m/s} \approx 55.0\text{ m/s}.

Final answer

(a) ω=440 rad/s\omega = 440\text{ rad/s}; (b) v=55.0 m/sv = 55.0\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting rotational quantities between rpm\text{rpm}, rev/s\text{rev/s} (frequency ff), and rad/s\text{rad/s} (angular speed ω\omega).

  • Always write out conversion units explicitly, ensuring revmin×2π rad1 rev×1 min60 s\frac{\text{rev}}{\text{min}} \times \frac{2\pi\text{ rad}}{1\text{ rev}} \times \frac{1\text{ min}}{60\text{ s}} cancels out to rad/s\text{rad/s}.

OverviewACEpath Teacher's Diagnosis

03 The student divides by 2π instead of multiplying by 2π when attempting to convert revolutions to radians.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ω=420060×2π=702π≈11.1 rad/s\omega = \frac{4200}{60 \times 2\pi} = \frac{70}{2\pi} \approx 11.1\text{ rad/s}

    Correct

    ω=4200×2π rad1 rev×1 min60 s=140π≈440 rad/s\omega = 4200 \times \frac{2\pi\text{ rad}}{1\text{ rev}} \times \frac{1\text{ min}}{60\text{ s}} = 140\pi \approx 440\text{ rad/s}

    Because one complete revolution equals 2π2\pi radians, you need to multiply the number of revolutions by 2π2\pi rather than dividing by it.

  2. Step 2

    r=0.125 m⟹v=rω=0.125×11.14=1.39 m/sr = 0.125\text{ m} \Longrightarrow v = r\omega = 0.125 \times 11.14 = 1.39\text{ m/s}

    Correct

    v=rω=(0.125 m)(140π rad/s)≈55.0 m/sv = r\omega = (0.125\text{ m})(140\pi\text{ rad/s}) \approx 55.0\text{ m/s}

    Your conversion of the radius to meters and your use of v=rωv = r\omega were completely correct, but the calculated numerical value was affected by the earlier error in ω\omega.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the rotational period from minutes to seconds by dividing by 6060.

You properly converted the radius r=12.5 cmr = 12.5\text{ cm} into standard SI units as 0.125 m0.125\text{ m}.

You selected and correctly applied the tangential speed formula v=rωv = r\omega.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Unit Conversion Factor

You placed the conversion factor 2π2\pi in the denominator instead of the numerator when converting revolutions to radians.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing whether radians or revolutions represent the larger unit leads to inverting the conversion ratio 2π rad1 rev\frac{2\pi\text{ rad}}{1\text{ rev}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis Check
  • Always write out explicit unit cancellation fractions: 1 rev=2π rad1\text{ rev} = 2\pi\text{ rad}.

  • Multiply rev/min\text{rev/min} by 2π rad1 rev×1 min60 s\frac{2\pi\text{ rad}}{1\text{ rev}} \times \frac{1\text{ min}}{60\text{ s}} so that rev\text{rev} cancels out in the numerator.

Magnitude Sanity Check
  • One complete turn (1 rev1\text{ rev}) is over 66 radians (2π≈6.282\pi \approx 6.28).

  • Ensure that the value in rad/s\text{rad/s} is roughly 6.286.28 times larger than the value in rev/s\text{rev/s}, not smaller.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ω=4200×2π60=140π≈440 rad/s\omega = \frac{4200 \times 2\pi}{60} = 140\pi \approx 440\text{ rad/s}

  2. v=rω=(0.125 m)(140π rad/s)=17.5π≈55.0 m/sv = r\omega = (0.125\text{ m})(140\pi\text{ rad/s}) = 17.5\pi \approx 55.0\text{ m/s}

Final answer

(a) ω=440 rad/s\omega = 440\text{ rad/s}; (b) v=55.0 m/sv = 55.0\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting rotational quantities using unit cancellation chains with units explicitly written out.

  • Verify your converted angular speed by estimating that rad/s≈0.105×rpm\text{rad/s} \approx 0.105 \times \text{rpm}.

Lock it in

Similar question

01

A bicycle wheel of radius r=35 cmr = 35\text{ cm} rotates at a constant angular speed of ω=20 rad/s\omega = 20\text{ rad/s}. Determine the linear speed of a point on the outer edge of the tire in meters per second (m/s\text{m/s}).

Answer

v=7.0 m/sv = 7.0\text{ m/s}. Convert radius to SI units: r=0.35 mr = 0.35\text{ m}. Apply v=rω=(0.35 m)(20 rad/s)=7.0 m/sv = r\omega = (0.35\text{ m})(20\text{ rad/s}) = 7.0\text{ m/s}.

02

An optical disc spins at 1800 rpm1800\text{ rpm}. A laser reads data from a track located at a distance of r=4.0 cmr = 4.0\text{ cm} from the center. Calculate the linear speed of this track in meters per second (m/s\text{m/s}).

Answer

v≈7.54 m/sv \approx 7.54\text{ m/s}. First find angular speed: ω=1800×2π60=60π rad/s≈188.5 rad/s\omega = 1800 \times \frac{2\pi}{60} = 60\pi\text{ rad/s} \approx 188.5\text{ rad/s}. Convert radius: r=0.040 mr = 0.040\text{ m}. Multiply: v=rω=(0.040 m)(60π rad/s)=2.4π≈7.54 m/sv = r\omega = (0.040\text{ m})(60\pi\text{ rad/s}) = 2.4\pi \approx 7.54\text{ m/s}.

03

A washing machine drum has a diameter of 50 cm50\text{ cm}. During the spin cycle, clothing against the inner wall experiences a tangential speed of 15.7 m/s15.7\text{ m/s}. Find (a) the angular speed ω\omega in rad/s\text{rad/s} and (b) the rotational speed in rpm\text{rpm}.

Answer

(a) ω=62.8 rad/s\omega = 62.8\text{ rad/s}; (b) 600 rpm600\text{ rpm}. The radius is r=0.50 m2=0.25 mr = \frac{0.50\text{ m}}{2} = 0.25\text{ m}. Using ω=vr\omega = \frac{v}{r}, we get ω=15.7 m/s0.25 m=62.8 rad/s\omega = \frac{15.7\text{ m/s}}{0.25\text{ m}} = 62.8\text{ rad/s} (or 20π rad/s20\pi\text{ rad/s}). Convert to rpm: 20π rad/s×60 s1 min×1 rev2π rad=600 rpm20\pi\text{ rad/s} \times \frac{60\text{ s}}{1\text{ min}} \times \frac{1\text{ rev}}{2\pi\text{ rad}} = 600\text{ rpm}.

Loading workspace…