Resources

A projectile is launched from ground level across flat, horizontal terrain with an initial velocity of v0=42.0 m/sv_0 = 42.0\text{ m/s} at an angle of θ=35.0∘\theta = 35.0^\circ above the horizontal. Neglecting air resistance and using g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate: (a) the total time of flight TT, (b) the maximum height HH reached above the launch point, and (c) the total horizontal range RR.

Answer and steps

Final answer

(a) T=4.92 sT = 4.92\text{ s}; (b) H=29.6 mH = 29.6\text{ m}; (c) R=170 mR = 170\text{ m}

Steps

01

Resolve the initial velocity into components

The projectile moves in two independent dimensions under uniform gravity acting downwards:

  • Horizontal component: v0x=v0cos⁡θ=42.0 m/s⋅cos⁡(35.0∘)≈34.40 m/sv_{0x} = v_0 \cos\theta = 42.0\text{ m/s} \cdot \cos(35.0^\circ) \approx 34.40\text{ m/s}
  • Vertical component: v0y=v0sin⁡θ=42.0 m/s⋅sin⁡(35.0∘)≈24.09 m/sv_{0y} = v_0 \sin\theta = 42.0\text{ m/s} \cdot \sin(35.0^\circ) \approx 24.09\text{ m/s}

02

Calculate the total time of flight (TT)

The vertical position as a function of time tt is given by: y(t)=v0yt−12gt2y(t) = v_{0y} t - \frac{1}{2}g t^2

Setting y(T)=0y(T) = 0 for landing on level ground (T>0T > 0): 0=t(v0y−12gt)  ⟹  T=2v0yg0 = t\left(v_{0y} - \frac{1}{2}g t\right) \implies T = \frac{2v_{0y}}{g}

Substitute the values: T=2⋅24.09 m/s9.80 m/s2≈4.916 s≈4.92 sT = \frac{2 \cdot 24.09\text{ m/s}}{9.80\text{ m/s}^2} \approx 4.916\text{ s} \approx 4.92\text{ s}


03

Calculate the maximum height (HH)

At the peak of the trajectory, the vertical velocity momentarily becomes zero (vy=0v_y = 0). Using the kinematic relationship vy2=v0y2−2gHv_y^2 = v_{0y}^2 - 2g H:

0=v0y2−2gH  ⟹  H=v0y22g0 = v_{0y}^2 - 2g H \implies H = \frac{v_{0y}^2}{2g}

Substitute the known values: H=(24.09 m/s)22⋅9.80 m/s2=580.33 m2/s219.60 m/s2≈29.61 m≈29.6 mH = \frac{(24.09\text{ m/s})^2}{2 \cdot 9.80\text{ m/s}^2} = \frac{580.33\text{ m}^2/\text{s}^2}{19.60\text{ m/s}^2} \approx 29.61\text{ m} \approx 29.6\text{ m}

Common Pitfall: At the highest point, only the vertical velocity component is zero (vy=0v_y = 0). The horizontal velocity component remains constant at vx=v0x=34.40 m/sv_x = v_{0x} = 34.40\text{ m/s}.


04

Calculate the total horizontal range (RR)

Because horizontal acceleration is zero (ax=0a_x = 0), the projectile covers horizontal distance at a constant speed: R=v0x⋅TR = v_{0x} \cdot T

Alternatively, using the double-angle range formula: R=v02sin⁡(2θ)g=(42.0 m/s)2sin⁡(70.0∘)9.80 m/s2=1764⋅0.93979.80≈169.1 mR = \frac{v_0^2 \sin(2\theta)}{g} = \frac{(42.0\text{ m/s})^2 \sin(70.0^\circ)}{9.80\text{ m/s}^2} = \frac{1764 \cdot 0.9397}{9.80} \approx 169.1\text{ m}

Rounding to appropriate precision gives: R=170 mR = 170\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the time to reach maximum height rather than the total time of flight, which halves both the time and the subsequent horizontal range.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V0y=42.0×sin⁡(35.0∘)=24.1 m/sV_{0y} = 42.0 \times \sin(35.0^\circ) = 24.1\text{ m/s}

  2. Step 2

    Vy=V0y−gt=0  ⟹  T=2.46 sV_y = V_{0y} - g t = 0 \implies T = 2.46\text{ s}

    Correct

    tapex=v0yg≈2.46 s  ⟹  T=2tapex=2v0yg≈4.92 st_{\text{apex}} = \frac{v_{0y}}{g} \approx 2.46\text{ s} \implies T = 2 t_{\text{apex}} = \frac{2 v_{0y}}{g} \approx 4.92\text{ s}

    Setting vy=0v_y = 0 finds the time to reach the trajectory peak, not the full flight time. For launch and landing at equal elevation, the total flight time is double the time to the peak: T=2tapex=2×2.46 s≈4.92 sT = 2 t_{\text{apex}} = 2 \times 2.46\text{ s} \approx 4.92\text{ s}.

  3. Step 3

    H=V0y22g=(24.1)22×9.80=29.6 mH = \frac{V_{0y}^2}{2g} = \frac{(24.1)^2}{2 \times 9.80} = 29.6\text{ m}

  4. Step 4

    V0x=42.0×cos⁡(35.0∘)=34.4 m/s  ⟹  R=V0x×T=34.4×2.46=84.6 mV_{0x} = 42.0 \times \cos(35.0^\circ) = 34.4\text{ m/s} \implies R = V_{0x} \times T = 34.4 \times 2.46 = 84.6\text{ m}

    Correct

    R=v0x⋅T=34.4 m/s⋅4.92 s≈169 m≈170 mR = v_{0x} \cdot T = 34.4\text{ m/s} \cdot 4.92\text{ s} \approx 169\text{ m} \approx 170\text{ m}

    Your horizontal velocity calculation and range formula are correct, but substituting the halved flight time (2.46 s2.46\text{ s}) halved your final range from 170 m170\text{ m} to 84.6 m84.6\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved the launch velocity into horizontal and vertical components.

You correctly calculated the maximum vertical height reached by the projectile.

You correctly identified the constant-velocity horizontal motion equation R=v0xTR = v_{0x} T.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Apex Time vs. Total Flight Time Confusion

You equated the condition for the peak (vy=0v_y = 0) with the condition for landing (y=0y = 0).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the time to reach maximum height (tapex=v0ygt_{\text{apex}} = \frac{v_{0y}}{g}) with the total time of flight (T=2v0ygT = \frac{2v_{0y}}{g}) for symmetric projectile motion over flat ground.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the landing condition
  • At the peak, vertical velocity is zero (vy=0v_y = 0). At landing on flat ground, vertical displacement is zero (y=0y = 0).

  • Always verify whether the problem asks for the time to the peak or the total flight time before substituting tt.

Apply trajectory symmetry
  • For launch and landing at the same vertical level, time of ascent equals time of descent: Ttotal=2tpeakT_{\text{total}} = 2 t_{\text{peak}}.

  • Multiply the apex time by 22 to obtain the full flight time whenever terrain is horizontal.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the time to the peak where vy=0v_y = 0: tapex=v0yg=24.09 m/s9.80 m/s2≈2.458 st_{\text{apex}} = \frac{v_{0y}}{g} = \frac{24.09\text{ m/s}}{9.80\text{ m/s}^2} \approx 2.458\text{ s}.

  2. Double this time for the full symmetric parabolic flight: T=2tapex=2×2.458 s≈4.92 sT = 2 t_{\text{apex}} = 2 \times 2.458\text{ s} \approx 4.92\text{ s}.

  3. Recalculate the horizontal range using the full time: R=v0xT=(34.40 m/s)(4.916 s)≈169.1 m≈170 mR = v_{0x} T = (34.40\text{ m/s})(4.916\text{ s}) \approx 169.1\text{ m} \approx 170\text{ m}.

Final answer

(a) T=4.92 sT = 4.92\text{ s}; (b) H=29.6 mH = 29.6\text{ m}; (c) R=170 mR = 170\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing between peak conditions (vy=0v_y = 0) and landing conditions (y=0y = 0).

  • Label your time variables distinctly as ttopt_{\text{top}} and TtotalT_{\text{total}} to avoid accidental substitution.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the trigonometric components by using cosine for vertical motion and sine for horizontal motion.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v0y=42.0×cos⁡(35.0∘)=34.4 m/sv_{0y} = 42.0 \times \cos(35.0^\circ) = 34.4\text{ m/s}

    Correct

    v0y=42.0×sin⁡(35.0∘)≈24.1 m/sv_{0y} = 42.0 \times \sin(35.0^\circ) \approx 24.1\text{ m/s}

    Because the launch angle 35.0∘35.0^\circ is measured relative to the horizontal ground, the vertical component is the side opposite to the angle, which requires the sine function rather than the cosine function.

  2. Step 2

    T=7.02 sT = 7.02\text{ s}

    Correct

    T=2v0yg=2(24.1 m/s)9.80 m/s2≈4.92 sT = \frac{2 v_{0y}}{g} = \frac{2(24.1\text{ m/s})}{9.80\text{ m/s}^2} \approx 4.92\text{ s}

    You correctly used the relationship T=2v0ygT = \frac{2 v_{0y}}{g}, but the value carries over the incorrect vertical velocity component from step 1.

  3. Step 3

    H=(34.4)22×9.80=60.4 mH = \frac{(34.4)^2}{2 \times 9.80} = 60.4\text{ m}

    Correct

    H=v0y22g=(24.1 m/s)22(9.80 m/s2)≈29.6 mH = \frac{v_{0y}^2}{2g} = \frac{(24.1\text{ m/s})^2}{2(9.80\text{ m/s}^2)} \approx 29.6\text{ m}

    Your formula H=v0y22gH = \frac{v_{0y}^2}{2g} is completely correct, but substituting 34.4 m/s34.4\text{ m/s} instead of 24.1 m/s24.1\text{ m/s} leads to an inflated peak height.

  4. Step 4

    v0x=42.0×sin⁡(35.0∘)=24.1 m/sv_{0x} = 42.0 \times \sin(35.0^\circ) = 24.1\text{ m/s}

    Correct

    v0x=42.0×cos⁡(35.0∘)≈34.4 m/sv_{0x} = 42.0 \times \cos(35.0^\circ) \approx 34.4\text{ m/s}

    The horizontal component is adjacent to the horizontal launch angle, so it must use cosine: v0x=v0cos⁡θv_{0x} = v_0 \cos\theta.

  5. Step 5

    R=24.1×7.02=169 mR = 24.1 \times 7.02 = 169\text{ m}

    Correct

    R=v0xT=34.4 m/s×4.92 s≈170 mR = v_{0x} T = 34.4\text{ m/s} \times 4.92\text{ s} \approx 170\text{ m}

    You correctly calculated horizontal range using R=v0xTR = v_{0x} T. Although swapping both components yields nearly the same product because sin⁡θcos⁡θ=cos⁡θsin⁡θ\sin\theta \cos\theta = \cos\theta \sin\theta, your individual factors for velocity and time were both incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct kinematic equations for flight time, maximum height, and horizontal range.

You correctly recognized that the horizontal motion has constant velocity and that vertical motion is governed by gravitational acceleration.

You performed accurate arithmetic and carried units cleanly through your calculations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Swap

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the cosine function with the vertical axis and sine with the horizontal axis, reversing the standard right-triangle definitions where the angle is measured above the horizontal.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Triangle Orientation
  • When an angle θ\theta is measured with respect to the horizontal, the horizontal side is adjacent (cosθ\\cos\theta) and the vertical side is opposite (sinθ\\sin\theta).

  • Always sketch a right triangle with launch vector v0v_0 as the hypotenuse, locate θ\theta, and label adjacent as v0x=v0cos⁡θv_{0x} = v_0 \cos\theta and opposite as v0y=v0sin⁡θv_{0y} = v_0 \sin\theta before computing numerical values.

Extreme-Angle Sanity Check
  • For a shallow launch angle (θ<45∘\theta < 45^\circ), the horizontal velocity component must be larger than the vertical velocity component.

  • Check your numbers: since 35∘<45∘35^\circ < 45^\circ, verify that v0x>v0yv_{0x} > v_{0y} before continuing.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Resolve components correctly using the angle above horizontal: v0x=42.0cos⁡(35.0∘)≈34.4 m/sv_{0x} = 42.0 \cos(35.0^\circ) \approx 34.4\text{ m/s} and v0y=42.0sin⁡(35.0∘)≈24.1 m/sv_{0y} = 42.0 \sin(35.0^\circ) \approx 24.1\text{ m/s}.

  2. Recalculate flight time: T=2v0yg=2(24.09 m/s)9.80 m/s2≈4.92 sT = \frac{2 v_{0y}}{g} = \frac{2(24.09\text{ m/s})}{9.80\text{ m/s}^2} \approx 4.92\text{ s}.

  3. Recalculate maximum height: H=v0y22g=(24.09 m/s)22(9.80 m/s2)≈29.6 mH = \frac{v_{0y}^2}{2g} = \frac{(24.09\text{ m/s})^2}{2(9.80\text{ m/s}^2)} \approx 29.6\text{ m}.

  4. Recalculate range: R=v0xT=(34.40 m/s)(4.916 s)≈170 mR = v_{0x} T = (34.40\text{ m/s})(4.916\text{ s}) \approx 170\text{ m}.

Final answer

(a) T=4.92 sT = 4.92\text{ s}, (b) H=29.6 mH = 29.6\text{ m}, (c) R=170 mR = 170\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice resolving velocity vectors given angles measured from the horizontal versus from the vertical.

  • Use the 45∘45^\circ comparison check on initial components to ensure the larger component corresponds to the smaller angle.

OverviewACEpath Teacher's Diagnosis

03 The student forgets the factor of 2 in the denominator when calculating the maximum height, using g instead of 2g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V0y=42.0×sin⁡(35.0∘)=24.1 m/s  ⟹  T=2×24.19.80=4.92 sV_{0y} = 42.0 \times \sin(35.0^\circ) = 24.1\text{ m/s} \implies T = \frac{2 \times 24.1}{9.80} = 4.92\text{ s}

  2. Step 2

    H=V0y2g=(24.1)29.80=59.3 mH = \frac{V_{0y}^2}{g} = \frac{(24.1)^2}{9.80} = 59.3\text{ m}

    Correct

    H=v0y22g=(24.1 m/s)22(9.80 m/s2)≈29.6 mH = \frac{v_{0y}^2}{2g} = \frac{(24.1\text{ m/s})^2}{2(9.80\text{ m/s}^2)} \approx 29.6\text{ m}

    You omitted the factor of 22 in the denominator. From the kinematic relationship vy2=v0y2−2gHv_y^2 = v_{0y}^2 - 2gH, setting vy=0v_y = 0 yields H=v0y22gH = \frac{v_{0y}^2}{2g}.

  3. Step 3

    V0x=42.0×cos⁡(35.0∘)=34.4 m/s  ⟹  R=34.4×4.92=169 mV_{0x} = 42.0 \times \cos(35.0^\circ) = 34.4\text{ m/s} \implies R = 34.4 \times 4.92 = 169\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved the initial velocity into vertical and horizontal components using trigonometric functions.

You used the correct equation to calculate the total flight time for level ground.

You accurately calculated the horizontal range using constant horizontal velocity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing denominator factor in peak height formula

You wrote H=v0y2gH = \frac{v_{0y}^2}{g} instead of dividing by 2g2g, giving exactly twice the actual maximum height.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the flight time denominator (gg) with the maximum height denominator (2g2g), or forgetting that the kinematic work-energy relation v2−v02=2aΔyv^2 - v_0^2 = 2a\Delta y introduces a factor of 22 alongside acceleration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinematic Derivation Check
  • At maximum height, vertical velocity is zero: vy2=v0y2−2gH=0  ⟹  H=v0y22gv_y^2 = v_{0y}^2 - 2gH = 0 \implies H = \frac{v_{0y}^2}{2g}.

  • Always verify the denominator by deriving the height formula from vy2=v0y2−2gHv_y^2 = v_{0y}^2 - 2gH rather than relying on memory.

Average Velocity Check
  • H=vy,avg⋅tpeak=(v0y+02)(v0yg)=v0y22gH = v_{y,\text{avg}} \cdot t_{\text{peak}} = \left(\frac{v_{0y} + 0}{2}\right)\left(\frac{v_{0y}}{g}\right) = \frac{v_{0y}^2}{2g}.

  • Notice that the average vertical speed during the ascent is v0y2\frac{v_{0y}}{2}, which supplies the factor of 22 in the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set vertical velocity to zero at the peak: vy2=v0y2−2gH=0v_y^2 = v_{0y}^2 - 2gH = 0.

  2. Solve for height: H=v0y22gH = \frac{v_{0y}^2}{2g}.

  3. Substitute v0y=24.1 m/sv_{0y} = 24.1\text{ m/s} and g=9.80 m/s2g = 9.80\text{ m/s}^2: H=(24.1)22×9.80=580.8119.6≈29.6 mH = \frac{(24.1)^2}{2 \times 9.80} = \frac{580.81}{19.6} \approx 29.6\text{ m}.

Final answer

(a) T=4.92 sT = 4.92\text{ s}; (b) H=29.6 mH = 29.6\text{ m}; (c) R=170 mR = 170\text{ m} (or 169 m169\text{ m} using rounded intermediate values)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the kinematic formula v2=v02+2aΔyv^2 = v_0^2 + 2a\Delta y to reinforce where the coefficient 22 originates.

  • Practice deriving both peak height H=v0y22gH = \frac{v_{0y}^2}{2g} and flight time T=2v0ygT = \frac{2v_{0y}}{g} side by side to avoid mixing up their coefficients.

Lock it in

Similar question

01

A football is kicked across a level field with an initial velocity of 20.0 m/s20.0\text{ m/s} at an angle of 30.0∘30.0^\circ above the horizontal. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, find (a) the total flight time TT and (b) the horizontal range RR.

Answer

(a) T≈2.04 sT \approx 2.04\text{ s}; (b) R≈35.3 mR \approx 35.3\text{ m}. Key steps: v0y=20.0sin⁡30.0∘=10.0 m/sv_{0y} = 20.0\sin 30.0^\circ = 10.0\text{ m/s}, so T=2v0yg=20.09.80≈2.04 sT = \frac{2v_{0y}}{g} = \frac{20.0}{9.80} \approx 2.04\text{ s}. Horizontal velocity v0x=20.0cos⁡30.0∘≈17.32 m/sv_{0x} = 20.0\cos 30.0^\circ \approx 17.32\text{ m/s}, giving R=v0xT=17.32×2.041≈35.3 mR = v_{0x} T = 17.32 \times 2.041 \approx 35.3\text{ m}.

02

An archer shoots an arrow from flat ground at an angle θ=45.0∘\theta = 45.0^\circ. The arrow reaches its maximum height 1.80 s1.80\text{ s} after launch. Assuming g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the initial launch speed v0v_0 and the total horizontal distance traveled before hitting the ground.

Answer

v0≈25.0 m/sv_0 \approx 25.0\text{ m/s}, Range R≈63.5 mR \approx 63.5\text{ m}. Key steps: Time to peak is tapex=v0yg=1.80 s  ⟹  v0y=1.80×9.80=17.64 m/st_{\text{apex}} = \frac{v_{0y}}{g} = 1.80\text{ s} \implies v_{0y} = 1.80 \times 9.80 = 17.64\text{ m/s}. Since θ=45.0∘\theta = 45.0^\circ, v0=17.64sin⁡45∘≈24.95 m/sv_0 = \frac{17.64}{\sin 45^\circ} \approx 24.95\text{ m/s} and v0x=17.64 m/sv_{0x} = 17.64\text{ m/s}. Total flight time is T=2×1.80=3.60 sT = 2 \times 1.80 = 3.60\text{ s}, so R=v0xT=17.64×3.60≈63.5 mR = v_{0x} T = 17.64 \times 3.60 \approx 63.5\text{ m}.

03

A projectile is launched from ground level at v0=50.0 m/sv_0 = 50.0\text{ m/s} at an angle θ\theta such that its maximum height is H=45.0 mH = 45.0\text{ m}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the total flight time TT and the launch angle θ\theta.

Answer

T≈6.06 sT \approx 6.06\text{ s}, θ≈36.4∘\theta \approx 36.4^\circ. Key steps: From H=v0y22gH = \frac{v_{0y}^2}{2g}, v0y=2gH=2×9.80×45.0=882≈29.70 m/sv_{0y} = \sqrt{2gH} = \sqrt{2 \times 9.80 \times 45.0} = \sqrt{882} \approx 29.70\text{ m/s}. Total flight time is T=2v0yg=2×29.709.80≈6.06 sT = \frac{2v_{0y}}{g} = \frac{2 \times 29.70}{9.80} \approx 6.06\text{ s}. The launch angle satisfies sin⁡θ=v0yv0=29.7050.0=0.594  ⟹  θ≈36.4∘\sin\theta = \frac{v_{0y}}{v_0} = \frac{29.70}{50.0} = 0.594 \implies \theta \approx 36.4^\circ.

Loading workspace…