Resources

A solid metal anchor of mass m=85.0 kgm = 85.0\text{ kg} and volume V=1.10×10−2 m3V = 1.10 \times 10^{-2}\text{ m}^3 is lowered vertically into a lake by a crane cable. Let the upward direction be defined as positive (+y+y). The anchor is submerged in water (ρw=1.00×103 kg/m3\rho_w = 1.00 \times 10^3\text{ kg/m}^3) and lowered with a downward acceleration of magnitude a=1.50 m/s2a = 1.50\text{ m/s}^2 (so ay=−1.50 m/s2a_y = -1.50\text{ m/s}^2). Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, write the one-dimensional Newton's second law equation incorporating the correct signs for tension TT, buoyant force FbF_b, and gravity FgF_g, and calculate the cable tension TT.

Answer and steps

Final answer

Newton's law: +T+Fb−mg=may+T + F_b - mg = m a_y; T=5.98×102 NT = 5.98 \times 10^2\text{ N}

Steps

01

Identify Forces and Coordinate System

Define the upward direction as the positive vertical axis (+y+y). The submerged anchor experiences three vertical forces:

  • Tension (TT), acting upward: +T+T
  • Buoyant force (FbF_b), acting upward: +Fb+F_b
  • Gravitational force (weight, Fg=mgF_g = mg), acting downward: −mg-mg

According to Newton's second law along the yy-axis: ∑Fy=may\sum F_y = m a_y

Substituting the forces with their directional signs gives the equation of motion: +T+Fb−mg=may+T + F_b - mg = m a_y

Common Pitfall: Be careful with the sign of the acceleration. Because the anchor accelerates downward, aya_y is negative (ay=−1.50 m/s2a_y = -1.50\text{ m/s}^2). If you use the magnitude aa directly without accounting for direction, the equation becomes T+Fb−mg=−maT + F_b - mg = -m a.


02

Calculate the Buoyant Force and Weight

By Archimedes' principle, the buoyant force equals the weight of the displaced water: Fb=ρwVgF_b = \rho_w V g

Substitute the given numerical values: Fb=(1.00×103 kg/m3)(1.10×10−2 m3)(9.80 m/s2)=107.8 NF_b = (1.00 \times 10^3\text{ kg/m}^3)(1.10 \times 10^{-2}\text{ m}^3)(9.80\text{ m/s}^2) = 107.8\text{ N}

The gravitational force on the anchor is: Fg=mg=(85.0 kg)(9.80 m/s2)=833.0 NF_g = mg = (85.0\text{ kg})(9.80\text{ m/s}^2) = 833.0\text{ N}


03

Solve for the Cable Tension TT

Rearrange Newton's second law equation to isolate TT: T=mg−Fb+mayT = mg - F_b + m a_y

Substitute the values into the equation: T=833.0 N−107.8 N+(85.0 kg)(−1.50 m/s2)T = 833.0\text{ N} - 107.8\text{ N} + (85.0\text{ kg})(-1.50\text{ m/s}^2) T=725.2 N−127.5 N=597.7 NT = 725.2\text{ N} - 127.5\text{ N} = 597.7\text{ N}

Rounding to three significant figures gives: T=5.98×102 NT = 5.98 \times 10^2\text{ N}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to account for the downward direction of acceleration, setting a_y = +1.50 m/s^2 instead of -1.50 m/s^2, resulting in an overestimated cable tension of 853 N.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fb=ρw⋅V⋅g=107.8 N  ⟹  Fg=m⋅g=85.0⋅9.80=833.0 NF_b = \rho_w \cdot V \cdot g = 107.8\text{ N} \implies F_g = m \cdot g = 85.0 \cdot 9.80 = 833.0\text{ N}

  2. Step 2

    T+Fb−Fg=m⋅a  ⟹  T+107.8−833.0=85.0⋅1.50T + F_b - F_g = m \cdot a \implies T + 107.8 - 833.0 = 85.0 \cdot 1.50

    Correct

    +T+Fb−mg=may  ⟹  T+107.8−833.0=85.0⋅(−1.50)+T + F_b - mg = m a_y \implies T + 107.8 - 833.0 = 85.0 \cdot (-1.50)

    Because upward is defined as +y+y and the anchor is accelerating downward, the vertical acceleration component is ay=−1.50 m/s2a_y = -1.50\text{ m/s}^2. Substituting +1.50 m/s2+1.50\text{ m/s}^2 treats the downward acceleration as upward.

  3. Step 3

    T−725.2=127.5  ⟹  T=852.7 N=853 NT - 725.2 = 127.5 \implies T = 852.7\text{ N} = 853\text{ N}

    Correct

    T−725.2=−127.5  ⟹  T=597.7 N≈5.98×102 NT - 725.2 = -127.5 \implies T = 597.7\text{ N} \approx 5.98 \times 10^2\text{ N}

    Your algebra is correct based on the previous step, but the numerical answer is incorrect due to the sign error on acceleration.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the buoyant force using Archimedes' principle.

You calculated the gravitational force on the anchor accurately.

You correctly assigned positive signs to upward forces (TT, FbF_b) and a negative sign to downward gravity (FgF_g).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematic sign convention error in Newton's second law

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the scalar magnitude of acceleration (a=1.50 m/s2a = 1.50\text{ m/s}^2) directly into the right-hand side of ∑Fy=may\sum F_y = m a_y without applying the negative sign required by the chosen +y+y coordinate system for downward acceleration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Coordinate Sign for Acceleration
  • In 1D vector equations along the yy-axis, ∑Fy=may\sum F_y = m a_y. If +y+y is upward, any downward acceleration vector must be entered with a negative sign: ay=−∣a∣a_y = -|a|.

  • Always explicitly write ay=−aa_y = -a before substituting numbers whenever an object accelerates in the negative coordinate direction.

Physical Reality Check for Lowering with Acceleration
  • When an object accelerates downward, the upward tension must be less than the net static upward support needed to hold it stationary.

  • Compare your calculated tension to the apparent weight at rest (mg−Fb=725.2 Nmg - F_b = 725.2\text{ N}). Because the cable allows downward acceleration, the cable tension must be strictly less than 725.2 N725.2\text{ N}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply Newton's second law along +y+y: +T+Fb−mg=may+T + F_b - mg = m a_y

  2. Substitute ay=−1.50 m/s2a_y = -1.50\text{ m/s}^2: T+107.8 N−833.0 N=(85.0 kg)(−1.50 m/s2)T + 107.8\text{ N} - 833.0\text{ N} = (85.0\text{ kg})(-1.50\text{ m/s}^2)

  3. Simplify the equation: T−725.2 N=−127.5 NT - 725.2\text{ N} = -127.5\text{ N}

  4. Isolate TT: T=725.2 N−127.5 N=597.7 NT = 725.2\text{ N} - 127.5\text{ N} = 597.7\text{ N}

Final answer

T=5.98×102 NT = 5.98 \times 10^2\text{ N} (or 598 N598\text{ N})

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the component form ∑Fy=may\sum F_y = m a_y and list each variable with its explicit sign (ay=−1.50 m/s2a_y = -1.50\text{ m/s}^2) before plugging in numbers.

  • Perform a physical intuition check: accelerating downward means net force points downward, so upward forces (T+FbT + F_b) must sum to less than gravity (mgmg).

OverviewACEpath Teacher's Diagnosis

02 The student omits the upward buoyant force acting on the submerged anchor entirely, yielding T = 705.5 N.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fg=m∗g=85.0∗9.80=833.0 NF_g = m * g = 85.0 * 9.80 = 833.0\text{ N}

  2. Step 2

    T−Fg=m∗ayT - F_g = m * a_y

    Correct

    +T+Fb−Fg=may+T + F_b - F_g = m a_y

    Because the anchor is submerged in water, it experiences an upward buoyant force Fb=ρwVgF_b = \rho_w V g in addition to cable tension TT and downward gravity FgF_g.

  3. Step 3

    T−833.0=85.0∗(−1.50)  ⟹  T−833.0=−127.5  ⟹  T=705.5 NT - 833.0 = 85.0 * (-1.50) \implies T - 833.0 = -127.5 \implies T = 705.5\text{ N}

    Correct

    T=mg−Fb+may=833.0 N−107.8 N−127.5 N=597.7 N≈5.98×102 NT = m g - F_b + m a_y = 833.0\text{ N} - 107.8\text{ N} - 127.5\text{ N} = 597.7\text{ N} \approx 5.98 \times 10^2\text{ N}

    Your algebraic solving and substitution of ay=−1.50 m/s2a_y = -1.50\text{ m/s}^2 were carried out correctly, but the resulting numerical value was skewed by the missing buoyant force.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the magnitude of the gravitational force on the anchor.

You correctly assigned a negative sign to the downward vertical acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted buoyant force

You set up Newton's second law as if the anchor were in free air rather than submerged in water.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Whenever an object is partially or fully immersed in a fluid, the surrounding fluid exerts an upward buoyant force equal to the weight of the displaced fluid (Fb=ρfluidVdispgF_b = \rho_{\text{fluid}} V_{\text{disp}} g). Omitting FbF_b from the free-body diagram leads to an overestimated cable tension.

REASONING PATH
Your ACEpath teacher’s suggested approach
Submerged Free-Body Diagram
  • Every fluid-immersed body experiences an upward buoyant force: Fb=ρfVsubgF_b = \rho_f V_{\text{sub}} g.

  • Draw all vertical forces before writing ∑Fy\sum F_y: upward tension +T+T, upward buoyancy +Fb+F_b, and downward gravity −mg-mg.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the buoyant force: Fb=ρwVg=(1.00×103 kg/m3)(1.10×10−2 m3)(9.80 m/s2)=107.8 NF_b = \rho_w V g = (1.00 \times 10^3\text{ kg/m}^3)(1.10 \times 10^{-2}\text{ m}^3)(9.80\text{ m/s}^2) = 107.8\text{ N}.

  2. Write Newton's second law with all three vertical forces: +T+Fb−mg=may+T + F_b - mg = m a_y.

  3. Isolate the cable tension: T=mg−Fb+may=833.0 N−107.8 N+(85.0 kg)(−1.50 m/s2)=597.7 NT = mg - F_b + m a_y = 833.0\text{ N} - 107.8\text{ N} + (85.0\text{ kg})(-1.50\text{ m/s}^2) = 597.7\text{ N}.

Final answer

T=5.98×102 NT = 5.98 \times 10^2\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always list fluid contact forces (buoyancy and drag, if applicable) whenever an object is placed inside a liquid or gas.

  • Verify your free-body diagram contains all interacting bodies before translating forces into ∑F=ma\sum F = ma.

OverviewACEpath Teacher's Diagnosis

03 The student treats the buoyant force as acting downward instead of upward, writing T - Fb - Fg = m * a_y and calculating T = 813.3 N.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fb=1000∗0.0110∗9.80=107.8 N  ⟹  Fg=85.0∗9.80=833.0 NF_b = 1000 * 0.0110 * 9.80 = 107.8\text{ N} \implies F_g = 85.0 * 9.80 = 833.0\text{ N}

  2. Step 2

    T−Fb−Fg=m∗ayT - F_b - F_g = m * a_y

    Correct

    +T+Fb−Fg=may+T + F_b - F_g = m a_y

    The buoyant force always acts vertically upward on a submerged object because fluid pressure increases with depth. Since the upward direction is defined as positive, FbF_b must enter the equation with a positive sign.

  3. Step 3

    T−107.8−833.0=85.0∗(−1.50)  ⟹  T−940.8=−127.5  ⟹  T=813.3 NT - 107.8 - 833.0 = 85.0 * (-1.50) \implies T - 940.8 = -127.5 \implies T = 813.3\text{ N}

    Correct

    T+107.8 N−833.0 N=85.0 kg×(−1.50 m/s2)  ⟹  T=597.7 N≈5.98×102 NT + 107.8\text{ N} - 833.0\text{ N} = 85.0\text{ kg} \times (-1.50\text{ m/s}^2) \implies T = 597.7\text{ N} \approx 5.98 \times 10^2\text{ N}

    Your algebraic rearrangement and substitution were executed accurately, but the result was affected by the negative sign assigned to the buoyant force.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Archimedes' principle to find the magnitude of the buoyant force.

You calculated the gravitational weight of the anchor accurately.

You correctly assigned a negative sign to the downward acceleration aya_y.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect force direction in free-body equation

You gave the buoyant force a negative sign instead of a positive sign when writing the vertical equation of motion.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating the buoyant force as a resistance that opposes motion or pulling in the direction of gravity, rather than recognizing that fluid pressure differences always push a submerged body vertically upward.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Buoyant Force
  • By Archimedes' principle, the buoyant force on a submerged body is always directed vertically upward, regardless of whether the object is moving up, moving down, or at rest.

  • Always draw a free-body diagram and place an upward-pointing vector for FbF_b whenever an object is immersed in a fluid.

Coordinate Sign Consistency
  • Every force pointing in the +y+y direction receives a positive sign in ∑Fy=may\sum F_y = m a_y, while every force pointing in the −y-y direction receives a negative sign.

  • Verify that both upward forces (TT and FbF_b) are positive terms: +T+Fb−mg=may+T + F_b - mg = m a_y.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the vertical force balance with upward forces positive: T+Fb−Fg=mayT + F_b - F_g = m a_y.

  2. Substitute the numerical values: T+107.8 N−833.0 N=(85.0 kg)(−1.50 m/s2)T + 107.8\text{ N} - 833.0\text{ N} = (85.0\text{ kg})(-1.50\text{ m/s}^2).

  3. Simplify the terms: T−725.2 N=−127.5 NT - 725.2\text{ N} = -127.5\text{ N}.

  4. Solve for cable tension: T=725.2 N−127.5 N=597.7 NT = 725.2\text{ N} - 127.5\text{ N} = 597.7\text{ N}.

Final answer

T=5.98×102 NT = 5.98 \times 10^2\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a quick free-body diagram for every dynamic fluid problem before writing equations.

  • Remember that buoyancy always helps the cable support the load upward, so the required tension should be smaller than if the object were in air.

Lock it in

Similar question

01

A submerged crate of mass m=40.0 kgm = 40.0\text{ kg} experiences a buoyant force Fb=150 NF_b = 150\text{ N}. It is lowered vertically by a crane with a downward acceleration of 2.00 m/s22.00\text{ m/s}^2. Taking upward as positive and g=9.80 m/s2g = 9.80\text{ m/s}^2, find the tension TT in the cable.

Answer

T=162 NT = 162\text{ N}. Key steps: ∑Fy=+T+Fb−mg=may\sum F_y = +T + F_b - mg = m a_y. With ay=−2.00 m/s2a_y = -2.00\text{ m/s}^2, T+150−(40.0)(9.80)=(40.0)(−2.00)  ⟹  T−242=−80  ⟹  T=162 NT + 150 - (40.0)(9.80) = (40.0)(-2.00) \implies T - 242 = -80 \implies T = 162\text{ N}.

02

A research probe of mass 120 kg120\text{ kg} and volume 0.0500 m30.0500\text{ m}^3 is completely submerged in seawater (ρ=1025 kg/m3\rho = 1025\text{ kg/m}^3) and hoisted upward by a winch with an upward acceleration of 1.20 m/s21.20\text{ m/s}^2. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the tension in the hoisting cable.

Answer

T=818 NT = 818\text{ N}. Key steps: Fb=ρVg=(1025)(0.0500)(9.80)=502.25 NF_b = \rho V g = (1025)(0.0500)(9.80) = 502.25\text{ N}; Fg=mg=(120)(9.80)=1176 NF_g = mg = (120)(9.80) = 1176\text{ N}. With upward positive, ay=+1.20 m/s2a_y = +1.20\text{ m/s}^2: T+Fb−mg=may  ⟹  T+502.25−1176=120(1.20)  ⟹  T−673.75=144  ⟹  T=817.75 N≈818 NT + F_b - mg = m a_y \implies T + 502.25 - 1176 = 120(1.20) \implies T - 673.75 = 144 \implies T = 817.75\text{ N} \approx 818\text{ N}.

03

A diver releases a solid ball of mass 2.00 kg2.00\text{ kg} and volume 3.50×10−3 m33.50 \times 10^{-3}\text{ m}^3 from rest underwater in fresh water (ρw=1.00×103 kg/m3\rho_w = 1.00 \times 10^3\text{ kg/m}^3). While the ball accelerates upward through the water, a light tether holds it to a sensor on the lakebed, limiting its upward acceleration to 1.80 m/s21.80\text{ m/s}^2. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2 and upward as +y+y, write Newton's second law along yy and calculate the tension TT in the downward tether.

Answer

T=11.1 NT = 11.1\text{ N}. Key steps: Tether pulls downward (−T-T), gravity acts downward (−mg-mg), buoyant force acts upward (+Fb+F_b). Newton's law: +Fb−mg−T=may+F_b - mg - T = m a_y. Calculate Fb=(1000)(3.50×10−3)(9.80)=34.3 NF_b = (1000)(3.50 \times 10^{-3})(9.80) = 34.3\text{ N} and mg=2.00(9.80)=19.6 Nmg = 2.00(9.80) = 19.6\text{ N}. With ay=+1.80 m/s2a_y = +1.80\text{ m/s}^2: 34.3−19.6−T=2.00(1.80)  ⟹  14.7−T=3.60  ⟹  T=11.1 N34.3 - 19.6 - T = 2.00(1.80) \implies 14.7 - T = 3.60 \implies T = 11.1\text{ N}.

Loading workspace…