Resources

An electric winch on a construction site lifts an equipment container of mass m=450 kgm = 450\text{ kg} vertically upward through a height of h=18.0 mh = 18.0\text{ m} at a constant speed in a time interval of Δt=25.0 s\Delta t = 25.0\text{ s}. Assuming the acceleration due to gravity is g=9.80 m/s2g = 9.80\text{ m/s}^2 and frictional losses in the cable system are negligible, calculate the average mechanical power PP delivered by the winch motor to the container.

Answer and steps

Final answer

P=3.17×103 WP = 3.17\times 10^3\text{ W} (or 3.17 kW3.17\text{ kW})

Steps

01

Identify the lifting force required

To find the average mechanical power delivered by the winch motor, we determine the work done against gravity and divide it by the time taken.

Because the container is raised vertically at a constant speed, its acceleration is zero (a=0a = 0). According to Newton's first law, the net vertical force on the container must be zero:

Fnet=Ftension−Fg=0F_{\text{net}} = F_{\text{tension}} - F_g = 0

Therefore, the upward lifting force FF exerted by the cable equals the weight of the container:

F=mgF = m g

Substituting the given values:

F=(450 kg)(9.80 m/s2)=4410 NF = (450\text{ kg})(9.80\text{ m/s}^2) = 4410\text{ N}

02

Calculate the work done by the winch

The work WW performed in lifting the container through a vertical displacement h=18.0 mh = 18.0\text{ m} in the direction of the force is:

W=F⋅h=mghW = F \cdot h = m g h

W=(4410 N)(18.0 m)=79 380 JW = (4410\text{ N})(18.0\text{ m}) = 79\,380\text{ J}

(Note: By the work-energy theorem, this work is entirely converted into the gravitational potential energy gained by the container, ΔU=mgh\Delta U = mgh.)

03

Calculate the average mechanical power

Average power PP is defined as the rate at which work is done over a time interval Δt\Delta t:

P=WΔtP = \frac{W}{\Delta t}

Substitute the calculated work and the time interval Δt=25.0 s\Delta t = 25.0\text{ s}:

P=79 380 J25.0 s=3175.2 WP = \frac{79\,380\text{ J}}{25.0\text{ s}} = 3175.2\text{ W}

Rounding to three significant figures to match the given precision yields:

P=3.17×103 W(or 3.17 kW)P = 3.17\times 10^3\text{ W}\quad \text{(or } 3.17\text{ kW)}

(Alternative method: One can also calculate the constant speed v=hΔt=18.0 m25.0 s=0.720 m/sv = \frac{h}{\Delta t} = \frac{18.0\text{ m}}{25.0\text{ s}} = 0.720\text{ m/s}, and then compute power directly as P=F⋅v=(4410 N)(0.720 m/s)=3175.2 WP = F \cdot v = (4410\text{ N})(0.720\text{ m/s}) = 3175.2\text{ W}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses work with force and omits the acceleration due to gravity, calculating work as mass times height instead of mass times gravity times height.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    W=m∗h  ⟹  W=450∗18.0=8100 JW = m * h \implies W = 450 * 18.0 = 8100\text{ J}

    Correct

    W=mgh=(450 kg)(9.80 m/s2)(18.0 m)=79 380 JW = m g h = (450\text{ kg})(9.80\text{ m/s}^2)(18.0\text{ m}) = 79\,380\text{ J}

    Work is the product of force and displacement (W=F⋅hW = F \cdot h). To lift an object vertically at constant speed, the applied upward force must balance gravity (F=mgF = m g), giving W=mghW = m g h. Multiplying mass directly by height omits gg and yields units of kg⋅m\text{kg}\cdot\text{m}, not joules.

  2. Step 2

    P=W/Δt  ⟹  P=8100/25.0=324 WP = W / \Delta t \implies P = 8100 / 25.0 = 324\text{ W}

    Correct

    P=WΔt=79 380 J25.0 s=3175.2 W≈3.17×103 WP = \frac{W}{\Delta t} = \frac{79\,380\text{ J}}{25.0\text{ s}} = 3175.2\text{ W} \approx 3.17\times 10^3\text{ W}

    Your definition of average power (P=WΔtP = \frac{W}{\Delta t}) and your division are mathematically correct, but the numerical result is off because it uses the incorrect value of WW from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the definition of average power as work divided by elapsed time (P=WΔtP = \frac{W}{\Delta t}).

You performed the final arithmetic calculation accurately based on your intermediate value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Gravitational Acceleration

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated mass (mm) as the lifting force rather than converting mass into weight (Fg=mgF_g = mg). Work requires force times displacement (W=FdW = F d), so lifting an object against gravity requires W=mghW = mgh.

REASONING PATH
Your ACEpath teacher’s suggested approach
Convert Mass to Weight
  • Mass is a scalar measure of inertia in kilograms (kg\text{kg}), whereas weight is the downward force of gravity in newtons (N\text{N}), given by Fg=mgF_g = mg.

  • Always multiply mass by gg before calculating the mechanical work done against gravity.

Unit Consistency Check
  • One joule (J\text{J}) is defined as one newton-meter (1 J=1 N⋅m=1 kg⋅m2/s21\text{ J} = 1\text{ N}\cdot\text{m} = 1\text{ kg}\cdot\text{m}^2/\text{s}^2).

  • Check the units of your work formula: m×hm \times h gives kg⋅m\text{kg}\cdot\text{m}, which is missing m/s2\text{m/s}^2 (gg) to form joules.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the upward force required to lift the container at constant speed: F=mg=(450 kg)(9.80 m/s2)=4410 NF = mg = (450\text{ kg})(9.80\text{ m/s}^2) = 4410\text{ N}.

  2. Compute the mechanical work done: W=Fh=(4410 N)(18.0 m)=79 380 JW = F h = (4410\text{ N})(18.0\text{ m}) = 79\,380\text{ J}.

  3. Compute the average power: P=WΔt=79 380 J25.0 s=3175.2 WP = \frac{W}{\Delta t} = \frac{79\,380\text{ J}}{25.0\text{ s}} = 3175.2\text{ W}.

Final answer

P=3.17×103 WP = 3.17\times 10^3\text{ W} (or 3.17 kW3.17\text{ kW})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between mass (mm) and gravitational force (Fg=mgF_g = mg).

  • Perform unit checks on your intermediate formulas to ensure the quantities represent energy (J\text{J}) rather than kg⋅m\text{kg}\cdot\text{m}.

  • Try the three targeted follow-up practice problems below to practice incorporating gg into power calculations.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies work by the time interval instead of dividing by time to find power.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    W=m∗g∗h=450∗9.80∗18.0=79380 JW = m * g * h = 450 * 9.80 * 18.0 = 79380\text{ J}

  2. Step 2

    P=W∗ΔtP = W * \Delta t

    Correct

    P=WΔtP = \frac{W}{\Delta t}

    Average power is defined as the rate at which work is done over time (P=WΔtP = \frac{W}{\Delta t}), not the product of work and time.

  3. Step 3

    P=79380∗25.0=1984500 WP = 79380 * 25.0 = 1984500\text{ W}

    Correct

    P=79 380 J25.0 s=3175.2 W≈3.17×103 W (or 3.17 kW)P = \frac{79\,380\text{ J}}{25.0\text{ s}} = 3175.2\text{ W} \approx 3.17\times 10^3\text{ W}\text{ (or } 3.17\text{ kW)}

    Your multiplication was arithmetically correct based on your formula, but the result is incorrect because it used the inverted relationship.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that lifting at a constant speed requires a force equal to the gravitational weight of the container.

You accurately calculated the total mechanical work performed using W=mghW = mgh.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Rate Formula

You wrote P=W⋅ΔtP = W \cdot \Delta t instead of dividing work by the time interval Δt\Delta t.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated power as a cumulative product rather than a time rate of energy transfer. Power measures how quickly work is delivered (joules per second, or watts), which always requires dividing work by the elapsed time.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall the Definition of Power
  • Power is the rate of energy transfer or work performed per unit time: P=ΔEΔt=WΔtP = \frac{\Delta E}{\Delta t} = \frac{W}{\Delta t}.

  • Whenever you need power, set up work divided by time, or force multiplied by velocity (P=FvP = Fv).

Use Dimensional Analysis
  • The unit of power is the watt (W\text{W}), which equals joules per second (J/s\text{J}/\text{s}).

  • Check your units: multiplying J⋅s\text{J} \cdot \text{s} gives action (joule-seconds), whereas dividing J/s\text{J}/\text{s} correctly yields watts.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the standard definition of average power: P=WΔtP = \frac{W}{\Delta t}.

  2. Substitute the work W=79 380 JW = 79\,380\text{ J} and time Δt=25.0 s\Delta t = 25.0\text{ s}: P=79 380 J25.0 s=3175.2 WP = \frac{79\,380\text{ J}}{25.0\text{ s}} = 3175.2\text{ W}.

  3. Round to three significant figures to match the given values: P=3.17×103 WP = 3.17\times 10^3\text{ W} (or 3.17 kW3.17\text{ kW}).

Final answer

P=3.17×103 WP = 3.17\times 10^3\text{ W} (or 3.17 kW3.17\text{ kW})

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice checking your formulas using basic SI base units (verifying that 1 W=1 J/s1\text{ W} = 1\text{ J/s}).

  • Solve problems where power is calculated via both P=WΔtP = \frac{W}{\Delta t} and P=FvP = Fv to reinforce both equivalent formulations.

OverviewACEpath Teacher's Diagnosis

03 The student miscalculates power by multiplying the force by time instead of dividing work by time, using P = F * Δt.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F=m∗g=450∗9.80=4410 NF = m * g = 450 * 9.80 = 4410\text{ N}

  2. Step 2

    P=F∗ΔtP = F * \Delta t

    Correct

    P=WΔt=F⋅hΔtP = \frac{W}{\Delta t} = \frac{F \cdot h}{\Delta t} (or P=F⋅vP = F \cdot v)

    Average power is defined as work done divided by time interval (P=WΔtP = \frac{W}{\Delta t}), not force multiplied by time. The quantity F⋅ΔtF \cdot \Delta t represents impulse, which has units of N⋅s\text{N}\cdot\text{s}, whereas power has units of watts (J/s\text{J/s}). Displacement hh must be accounted for.

  3. Step 3

    P=4410∗25.0=110250 WP = 4410 * 25.0 = 110250\text{ W}

    Correct

    P=(4410 N)(18.0 m)25.0 s=3175.2 W≈3.17×103 WP = \frac{(4410\text{ N})(18.0\text{ m})}{25.0\text{ s}} = 3175.2\text{ W} \approx 3.17\times 10^3\text{ W}

    Your numerical evaluation correctly followed the formula you wrote, but because the formula was incorrect, the resulting value does not equal the delivered power.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that lifting at a constant speed means the upward tension force equals the gravitational weight mgmg.

You performed the arithmetic for the force calculation accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion between power and impulse

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the definition of mechanical power (P=WΔtP = \frac{W}{\Delta t}) with impulse (J=FΔtJ = F \Delta t), omitting the vertical displacement hh and multiplying force by time instead of dividing work by time.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional and Definition Check for Power
  • Power measures the rate of energy transfer or work done: P=WΔt=F⋅dΔt=F⋅vP = \frac{W}{\Delta t} = \frac{F \cdot d}{\Delta t} = F \cdot v. Its SI unit is the watt (W=J/s=N⋅m/s\text{W} = \text{J/s} = \text{N}\cdot\text{m/s}).

  • Always verify that your formula includes displacement (dd or hh) and that time is in the denominator when calculating a rate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the work done by the lifting force: W=F⋅h=(4410 N)(18.0 m)=79 380 JW = F \cdot h = (4410\text{ N})(18.0\text{ m}) = 79\,380\text{ J}.

  2. Divide the total work by the time interval to find average power: P=WΔt=79 380 J25.0 s=3175.2 WP = \frac{W}{\Delta t} = \frac{79\,380\text{ J}}{25.0\text{ s}} = 3175.2\text{ W}.

Final answer

P=3.17×103 WP = 3.17\times 10^3\text{ W} (or 3.17 kW3.17\text{ kW})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between mechanical power (P=W/tP = W/t) and linear impulse (J=FΔtJ = F \Delta t) using unit analysis.

  • Practice calculating power via both P=mghΔtP = \frac{mgh}{\Delta t} and P=F⋅vP = F \cdot v to reinforce the relationship between power, force, and velocity.

Lock it in

Similar question

01

A crane lifts a 600 kg600\text{ kg} pallet of bricks vertically to a height of 12.0 m12.0\text{ m} in 15.0 s15.0\text{ s} at constant speed. Assuming g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the average power delivered by the crane.

Answer

P=4.70×103 WP = 4.70\times 10^3\text{ W} (or 4.70 kW4.70\text{ kW}). Key steps: W=mgh=(600 kg)(9.80 m/s2)(12.0 m)=70 560 JW = mgh = (600\text{ kg})(9.80\text{ m/s}^2)(12.0\text{ m}) = 70\,560\text{ J}; P=WΔt=70 560 J15.0 s=4704 W≈4.70 kWP = \frac{W}{\Delta t} = \frac{70\,560\text{ J}}{15.0\text{ s}} = 4704\text{ W} \approx 4.70\text{ kW}.

02

An elevator cab with passengers has a total mass of 1200 kg1200\text{ kg} and ascends 30.0 m30.0\text{ m} at a constant speed of 2.50 m/s2.50\text{ m/s}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find the average power supplied by the motor.

Answer

P=2.94×104 WP = 2.94\times 10^4\text{ W} (or 29.4 kW29.4\text{ kW}). Key steps: Upward force F=mg=(1200)(9.80)=11 760 NF = mg = (1200)(9.80) = 11\,760\text{ N}; Power P=Fv=(11 760 N)(2.50 m/s)=29 400 WP = F v = (11\,760\text{ N})(2.50\text{ m/s}) = 29\,400\text{ W} (or via Δt=30.02.50=12.0 s\Delta t = \frac{30.0}{2.50} = 12.0\text{ s} and P=mghΔtP = \frac{mgh}{\Delta t}).

03

A water pump raises 0.500 m30.500\text{ m}^3 of water (density ρ=1000 kg/m3\rho = 1000\text{ kg/m}^3) from an underground well of depth 14.0 m14.0\text{ m} in 40.0 s40.0\text{ s}. If the pump motor is 70.0%70.0\% efficient, what electrical power input does it consume? (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

Pin=2.45×103 WP_{\text{in}} = 2.45\times 10^3\text{ W} (or 2.45 kW2.45\text{ kW}). Key steps: Mass m=ρV=500 kgm = \rho V = 500\text{ kg}; Work Wout=mgh=(500)(9.80)(14.0)=68 600 JW_{\text{out}} = mgh = (500)(9.80)(14.0) = 68\,600\text{ J}; Useful mechanical power Pout=68 60040.0=1715 WP_{\text{out}} = \frac{68\,600}{40.0} = 1715\text{ W}; Electrical power Pin=Pout0.700=17150.700=2450 WP_{\text{in}} = \frac{P_{\text{out}}}{0.700} = \frac{1715}{0.700} = 2450\text{ W}.

Loading workspace…