Resources

A simple pendulum of length L=1.000 mL = 1.000\text{ m} and bob mass m=0.100 kgm = 0.100\text{ kg} is set into motion with an initial release angle θ0\theta_0 that approaches the extreme asymptotic inversion limit θ0→180∘\theta_0 \to 180^\circ (θ0→π rad\theta_0 \to \pi\text{ rad}). According to large-amplitude pendulum theory, the period diverges logarithmically as T(θ0)≈2πT0ln⁡(8π−θ0)T(\theta_0) \approx \frac{2}{\pi} T_0 \ln\left(\frac{8}{\pi - \theta_0}\right) when θ0\theta_0 is very close to π\pi, where T0=2πLgT_0 = 2\pi \sqrt{\frac{L}{g}} is the small-angle period and g=9.800 m/s2g = 9.800\text{ m/s}^2. If the pendulum is released from an angle differing from the vertically inverted position by only δ=π−θ0=1.000×10−4 rad\delta = \pi - \theta_0 = 1.000 \times 10^{-4}\text{ rad}: (a) calculate the small-angle period T0T_0, (b) calculate the extreme asymptotic period TT, and (c) find the mechanical energy required to hold the bob at this inverted position relative to the bottom equilibrium position.

Answer and steps

Final answer

(a) T0=2.006 sT_0 = 2.006\text{ s}; (b) T=14.41 sT = 14.41\text{ s}; (c) E=1.960 JE = 1.960\text{ J}

Steps

Part (a): Calculate the Small-Angle Period T0T_0

For small angular displacements, the period of a simple pendulum depends only on its length LL and the local acceleration due to gravity gg:

T0=2πLgT_0 = 2\pi \sqrt{\frac{L}{g}}

Substitute the given values L=1.000 mL = 1.000\text{ m} and g=9.800 m/s2g = 9.800\text{ m/s}^2:

T0=2π1.0009.800=2π0.10204≈2π×0.31944≈2.006 sT_0 = 2\pi \sqrt{\frac{1.000}{9.800}} = 2\pi \sqrt{0.10204} \approx 2\pi \times 0.31944 \approx 2.006\text{ s}


Part (b): Calculate the Extreme Asymptotic Period TT

When the release angle θ0\theta_0 approaches π rad\pi\text{ rad} (the vertically inverted position), the restoring torque near the top vanishes, causing the pendulum to linger near the inverted point. The period diverges logarithmically according to the given formula:

T(θ0)≈2πT0ln⁡(8π−θ0)=2πT0ln⁡(8δ)T(\theta_0) \approx \frac{2}{\pi} T_0 \ln\left(\frac{8}{\pi - \theta_0}\right) = \frac{2}{\pi} T_0 \ln\left(\frac{8}{\delta}\right)

Given δ=π−θ0=1.000×10−4 rad\delta = \pi - \theta_0 = 1.000 \times 10^{-4}\text{ rad}:

  1. Compute the argument of the logarithm: 8δ=81.000×10−4=8.000×104\frac{8}{\delta} = \frac{8}{1.000 \times 10^{-4}} = 8.000 \times 10^4
  2. Evaluate the natural logarithm: ln⁡(8.000×104)≈11.290\ln\left(8.000 \times 10^4\right) \approx 11.290
  3. Substitute T0=2.006 sT_0 = 2.006\text{ s} into the asymptotic formula: T≈2π×2.006 s×11.290≈14.41 sT \approx \frac{2}{\pi} \times 2.006\text{ s} \times 11.290 \approx 14.41\text{ s}

(Pitfall note: Remember to use natural logarithm ln⁡\ln, not base-10 logarithm log⁡10\log_{10}, and keep angles in radians.)


Part (c): Mechanical Energy at the Initial Release Position

Taking the bottom equilibrium position (θ=0\theta = 0) as the reference level for gravitational potential energy (U=0U = 0):

The height of the bob above the bottom position for any angle θ0\theta_0 is: h=L−Lcos⁡θ0=L(1−cos⁡θ0)h = L - L\cos\theta_0 = L(1 - \cos\theta_0)

Because the bob is released from rest, its kinetic energy at release is zero (K=0K = 0), so the total mechanical energy equals its potential energy: E=U=mgh=mgL(1−cos⁡θ0)E = U = mgh = mgL(1 - \cos\theta_0)

Since θ0=π−δ\theta_0 = \pi - \delta: cos⁡θ0=cos⁡(π−δ)=−cos⁡δ\cos\theta_0 = \cos(\pi - \delta) = -\cos\delta

For δ=1.000×10−4 rad\delta = 1.000 \times 10^{-4}\text{ rad}, cos⁡δ≈1−δ22≈1.000000\cos\delta \approx 1 - \frac{\delta^2}{2} \approx 1.000000: h=L(1−(−cos⁡δ))=L(1+cos⁡δ)≈2L=2(1.000 m)=2.000 mh = L\big(1 - (-\cos\delta)\big) = L(1 + \cos\delta) \approx 2L = 2(1.000\text{ m}) = 2.000\text{ m}

Now calculate the mechanical energy: E=(0.100 kg)×(9.800 m/s2)×(2.000 m)=1.960 JE = (0.100\text{ kg}) \times (9.800\text{ m/s}^2) \times (2.000\text{ m}) = 1.960\text{ J}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets the natural logarithm ln as base-10 logarithm log10 in the asymptotic period formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T0=2π1.0009.800=2.007 sT_0 = 2\pi \sqrt{\frac{1.000}{9.800}} = 2.007\text{ s}

  2. Step 2

    T=2πT0log⁡(81.000×10−4)  ⟹  T=(2π)(2.007)log⁡(80000)=(2π)(2.007)(4.903)  ⟹  T=6.265 sT = \frac{2}{\pi} T_0 \log\left(\frac{8}{1.000 \times 10^{-4}}\right) \implies T = \left(\frac{2}{\pi}\right)(2.007) \log(80000) = \left(\frac{2}{\pi}\right)(2.007)(4.903) \implies T = 6.265\text{ s}

    Correct

    T≈2πT0ln⁡(8δ)=2π(2.006 s)ln⁡(80000)≈2π(2.006 s)(11.290)≈14.41 sT \approx \frac{2}{\pi} T_0 \ln\left(\frac{8}{\delta}\right) = \frac{2}{\pi} (2.006\text{ s}) \ln(80000) \approx \frac{2}{\pi} (2.006\text{ s})(11.290) \approx 14.41\text{ s}

    You substituted the base-10 logarithm log⁡10(80000)≈4.903\log_{10}(80000) \approx 4.903 instead of the natural logarithm ln⁡(80000)≈11.290\ln(80000) \approx 11.290. In theoretical physics and asymptotic pendulum formulas, ln⁡\ln always denotes the natural logarithm with base ee.

  3. Step 3

    ΔU=mgL(1−cos⁡θ0)=(0.100)(9.800)(1.000)(1−cos⁡(π−1.000×10−4))  ⟹  ΔU=(0.980)(1+cos⁡(1.000×10−4))≈(0.980)(2.000)=1.960 J\Delta U = mgL(1 - \cos\theta_0) = (0.100)(9.800)(1.000)\left(1 - \cos(\pi - 1.000 \times 10^{-4})\right) \implies \Delta U = (0.980)\left(1 + \cos(1.000 \times 10^{-4})\right) \approx (0.980)(2.000) = 1.960\text{ J}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the small-angle period T0T_0 using the simple pendulum formula.

You accurately identified that the kinetic energy at release is zero and expressed the mechanical energy as potential energy.

You successfully applied the angle identity cos⁡(π−δ)=−cos⁡δ\cos(\pi - \delta) = -\cos\delta and small-angle approximation to compute the mechanical energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Logarithm Base Confusion (ln vs log10)

You wrote log⁡\log and calculated log⁡10(80000)≈4.903\log_{10}(80000) \approx 4.903 instead of taking the natural logarithm ln⁡(80000)≈11.290\ln(80000) \approx 11.290.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the natural logarithm ln⁡\ln (base ee) with the common logarithm log⁡10\log_{10} (base 1010) when executing analytical formulas from theoretical physics. Physical differential equations and their asymptotic integral expansions naturally produce base-ee logarithms.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Logarithm Base in Calculus & Physics Formulas
  • Formulas involving ln⁡(x)\ln(x) originate from integration of 1/x1/x, meaning the base is Euler's number e≈2.718e \approx 2.718, not 1010.

  • Always compute ln⁡(x)\ln(x) using the natural log function on your calculator when evaluating physics formulas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the argument: 8δ=81.000×10−4=80000\frac{8}{\delta} = \frac{8}{1.000 \times 10^{-4}} = 80000.

  2. Compute the natural logarithm: ln⁡(80000)≈11.2898\ln(80000) \approx 11.2898.

  3. Substitute into the asymptotic formula: T≈2π(2.006 s)(11.2898)≈14.41 sT \approx \frac{2}{\pi}(2.006\text{ s})(11.2898) \approx 14.41\text{ s}.

Final answer

(a) T0=2.006 sT_0 = 2.006\text{ s}; (b) T=14.41 sT = 14.41\text{ s}; (c) E=1.960 JE = 1.960\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check whether logarithmic formulas in physics use base ee (ln⁡\ln) or base 1010 (log⁡10\log_{10}) before entering numbers into your calculator.

  • Remember that ln⁡(x)=ln⁡(10)⋅log⁡10(x)≈2.3026log⁡10(x)\ln(x) = \ln(10) \cdot \log_{10}(x) \approx 2.3026 \log_{10}(x), so confusing the two reduces your result by more than half.

OverviewACEpath Teacher's Diagnosis

02 The student uses the small-angle potential energy approximation mgLθ²/2 instead of the full potential energy formula 1 - cos θ, confusing small-angle displacement with the small deviation δ from the inverted position.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T0=2π1.0009.800=2.007 sT_0 = 2\pi \sqrt{\frac{1.000}{9.800}} = 2.007\text{ s}

  2. Step 2

    T=(2π)(2.007)ln⁡(81.000×10−4)  ⟹  T=(2π)(2.007)ln⁡(80000)=14.42 sT = \left(\frac{2}{\pi}\right)(2.007) \ln\left(\frac{8}{1.000 \times 10^{-4}}\right) \implies T = \left(\frac{2}{\pi}\right)(2.007) \ln(80000) = 14.42\text{ s}

  3. Step 3

    ΔU=(12)mgLδ2\Delta U = \left(\frac{1}{2}\right)mgL\delta^2

    Correct

    E=U=mgL(1−cos⁡θ0)=mgL(1+cos⁡δ)≈2mgLE = U = mgL(1 - \cos\theta_0) = mgL(1 + \cos\delta) \approx 2mgL

    The formula 12mgLθ2\frac{1}{2}mgL\theta^2 is only the potential energy approximation for a small displacement near the bottom equilibrium (θ≈0\theta \approx 0). For an angle near the vertically inverted position (θ0=π−δ\theta_0 = \pi - \delta), the bob is at a height of approximately 2L2L above the bottom equilibrium reference level.

  4. Step 4

    ΔU=(12)(0.100)(9.800)(1.000)(1.000×10−4)2  ⟹  ΔU=4.900×10−9 J\Delta U = \left(\frac{1}{2}\right)(0.100)(9.800)(1.000)(1.000 \times 10^{-4})^2 \implies \Delta U = 4.900 \times 10^{-9}\text{ J}

    Correct

    E=(0.100 kg)(9.800 m/s2)(2.000 m)=1.960 JE = (0.100\text{ kg})(9.800\text{ m/s}^2)(2.000\text{ m}) = 1.960\text{ J}

    Because you substituted the parameters into the incorrect potential energy formula from the previous step, your final numerical value for the mechanical energy is incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the small-angle period T0T_0 correctly with appropriate precision.

You substituted the deviation δ\delta into the asymptotic logarithmic expression and evaluated the natural logarithm accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Harmonic approximation applied at inverted equilibrium

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the small deviation angle δ\delta from the inverted position with a small displacement from the bottom equilibrium, incorrectly applying the quadratic approximation U≈12mgLθ2U \approx \frac{1}{2}mgL\theta^2 instead of measuring height from the bottom reference plane where h=L(1−cos⁡θ0)≈2Lh = L(1 - \cos\theta_0) \approx 2L.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Level Verification
  • For a simple pendulum with zero potential energy at the lowest point, the height of the bob at angle θ\theta is h=L(1−cos⁡θ)h = L(1 - \cos\theta).

  • Always sketch the physical pendulum and locate the reference line U=0U = 0 before choosing a potential energy expression.

Angle Meaning in Approximations
  • The Taylor expansion 1−cos⁡ϕ≈12ϕ21 - \cos\phi \approx \frac{1}{2}\phi^2 applies to small angles measured away from zero, not to positions near π\pi.

  • Express the angle in terms of deviation from π\pi (θ=π−δ\theta = \pi - \delta), so cos⁡θ=−cos⁡δ≈−(1−12δ2)\cos\theta = -\cos\delta \approx -(1 - \frac{1}{2}\delta^2), leading to h=L(1−cos⁡θ)≈2Lh = L(1 - \cos\theta) \approx 2L rather than a negligible height.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the reference level U=0U = 0 at the bottom equilibrium position, giving potential energy U(θ0)=mgL(1−cos⁡θ0)U(\theta_0) = mgL(1 - \cos\theta_0).

  2. Substitute θ0=π−δ\theta_0 = \pi - \delta, giving cos⁡θ0=cos⁡(π−δ)=−cos⁡δ\cos\theta_0 = \cos(\pi - \delta) = -\cos\delta.

  3. For δ=1.000×10−4 rad\delta = 1.000 \times 10^{-4}\text{ rad}, cos⁡δ≈1\cos\delta \approx 1, which gives height h=L(1−(−cos⁡δ))≈2L=2.000 mh = L(1 - (-\cos\delta)) \approx 2L = 2.000\text{ m}.

  4. Calculate the mechanical energy required to hold the bob at rest: E=mgh=(0.100 kg)(9.800 m/s2)(2.000 m)=1.960 JE = mgh = (0.100\text{ kg})(9.800\text{ m/s}^2)(2.000\text{ m}) = 1.960\text{ J}.

Final answer

E=1.960 JE = 1.960\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric definition of gravitational potential energy for pendulums at large angles.

  • Practice distinguishing the small-angle harmonic approximation near the bottom from asymptotic behavior near the top inverted position.

OverviewACEpath Teacher's Diagnosis

03 The student forgets the factor of 2/π in the asymptotic period formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T0=2π1.0009.800=2.007 sT_0 = 2\pi \sqrt{\frac{1.000}{9.800}} = 2.007\text{ s}

  2. Step 2

    T=T0ln⁡(8π−θ0)  ⟹  T=(2.007)ln⁡(80000)=(2.007)(11.2898)  ⟹  T=22.66 sT = T_0 \ln\left(\frac{8}{\pi - \theta_0}\right) \implies T = (2.007) \ln(80000) = (2.007)(11.2898) \implies T = 22.66\text{ s}

    Correct

    T≈2πT0ln⁡(8π−θ0)=2π(2.006 s)ln⁡(80000)≈14.41 sT \approx \frac{2}{\pi} T_0 \ln\left(\frac{8}{\pi - \theta_0}\right) = \frac{2}{\pi}(2.006\text{ s})\ln(80000) \approx 14.41\text{ s}

    You omitted the dimensionless factor 2π\frac{2}{\pi} from the asymptotic formula given in the problem statement, which led to an overstated period.

  3. Step 3

    ΔU=mgL(1−cos⁡θ0)  ⟹  ΔU=(0.100)(9.800)(1.000)(1−cos⁡(π−1.000×10−4))  ⟹  ΔU=1.960 J\Delta U = mgL(1 - \cos\theta_0) \implies \Delta U = (0.100)(9.800)(1.000)(1 - \cos(\pi - 1.000 \times 10^{-4})) \implies \Delta U = 1.960\text{ J}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the small-angle period formula to evaluate T0T_0.

You evaluated the argument of the logarithm and the natural logarithm ln⁡(80000)\ln(80000) accurately.

You correctly formulated the gravitational potential energy for the near-inverted pendulum.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula transcription error

You accidentally omitted the multiplier 2π\frac{2}{\pi} when copying down the given asymptotic period formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the prefactor 2π\frac{2}{\pi} when translating the exact complete elliptic integral asymptotics T=4ω0K(k)T = \frac{4}{\omega_0} K(k) back to the base period T0=2πω0T_0 = \frac{2\pi}{\omega_0}, where T=2πT0K(k)T = \frac{2}{\pi} T_0 K(k).

REASONING PATH
Your ACEpath teacher’s suggested approach
Prefactor Verification
  • The asymptotic relation is T(θ0)≈2πT0ln⁡(8δ)T(\theta_0) \approx \frac{2}{\pi} T_0 \ln\left(\frac{8}{\delta}\right), not T0ln⁡(8δ)T_0 \ln\left(\frac{8}{\delta}\right).

  • Always double-check that every constant coefficient and dimensionless factor from the given formula is carried into your calculation step.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write down the full asymptotic formula: T≈2πT0ln⁡(8δ)T \approx \frac{2}{\pi} T_0 \ln\left(\frac{8}{\delta}\right).

  2. Substitute T0=2.006 sT_0 = 2.006\text{ s} and δ=1.000×10−4 rad\delta = 1.000 \times 10^{-4}\text{ rad}: T≈2π(2.006 s)ln⁡(8.000×104)T \approx \frac{2}{\pi} (2.006\text{ s}) \ln\left(8.000 \times 10^4\right).

  3. Multiply the factors: T≈2π×2.006×11.2898≈14.41 sT \approx \frac{2}{\pi} \times 2.006 \times 11.2898 \approx 14.41\text{ s}.

Final answer

(a) T0=2.006 sT_0 = 2.006\text{ s}; (b) T=14.41 sT = 14.41\text{ s}; (c) E=1.960 JE = 1.960\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-read problem-provided asymptotic formulas carefully before substitution to ensure no constant factor like 2π\frac{2}{\pi} is omitted.

  • Practice converting elliptic integral forms K(k)K(k) to pendulum period forms T=2πT0K(k)T = \frac{2}{\pi} T_0 K(k).

Lock it in

Similar question

01

A simple pendulum with T0=2.000 sT_0 = 2.000\text{ s} is released from an angle where π−θ0=1.000×10−2 rad\pi - \theta_0 = 1.000 \times 10^{-2}\text{ rad}. Using the asymptotic formula T≈2πT0ln⁡(8π−θ0)T \approx \frac{2}{\pi} T_0 \ln\left(\frac{8}{\pi - \theta_0}\right), calculate the period TT.

Answer

T≈8.51 sT \approx 8.51\text{ s}. Step 1: Argument is 810−2=800\frac{8}{10^{-2}} = 800. Step 2: ln⁡(800)≈6.6846\ln(800) \approx 6.6846. Step 3: T=2π(2.000)(6.6846)≈8.51 sT = \frac{2}{\pi}(2.000)(6.6846) \approx 8.51\text{ s}.

02

Rocket staging velocity depends on the Tsiolkovsky equation Δv=veln⁡(m0mf)\Delta v = v_e \ln\left(\frac{m_0}{m_f}\right). If ve=3000 m/sv_e = 3000\text{ m/s} and the mass ratio is m0mf=10\frac{m_0}{m_f} = 10, calculate Δv\Delta v.

Answer

Δv≈6908 m/s\Delta v \approx 6908\text{ m/s}. Step 1: Evaluate ln⁡(10)≈2.3026\ln(10) \approx 2.3026 (do not use log⁡10(10)=1\log_{10}(10) = 1). Step 2: Multiply by exhaust velocity: Δv=3000×2.3026≈6908 m/s\Delta v = 3000 \times 2.3026 \approx 6908\text{ m/s}.

03

In an adiabatic process, the entropy change of an ideal gas per mole at constant volume is ΔS=CVln⁡(T2/T1)\Delta S = C_V \ln(T_2/T_1). If CV=32RC_V = \frac{3}{2}R, T1=300 KT_1 = 300\text{ K}, and T2=600 KT_2 = 600\text{ K}, calculate ΔS\Delta S in terms of the gas constant RR.

Answer

ΔS=32Rln⁡(2)≈1.040R\Delta S = \frac{3}{2} R \ln(2) \approx 1.040 R. Step 1: T2/T1=2T_2/T_1 = 2. Step 2: ln⁡(2)≈0.6931\ln(2) \approx 0.6931. Step 3: ΔS=1.5×0.6931R≈1.040R\Delta S = 1.5 \times 0.6931 R \approx 1.040 R.

Loading workspace…