Resources

A horizontal mass-spring oscillator consists of a 0.400 kg0.400\text{ kg} block attached to a spring with a force constant of k=160 N/mk = 160\text{ N/m} on a frictionless surface. The block is pulled from its equilibrium position (x=0x = 0) to an initial displacement of x=+0.150 mx = +0.150\text{ m} and released from rest at t=0t = 0. Calculate (a) the total mechanical energy EE of the system, and (b) the kinetic energy KK and speed vv of the block when it reaches a position of x=+0.0900 mx = +0.0900\text{ m}.

Answer and steps

Final answer

(a) Total mechanical energy E=1.80 JE = 1.80\text{ J}; (b) Kinetic energy K=1.15 JK = 1.15\text{ J}, speed v=2.40 m/sv = 2.40\text{ m/s}.

Steps

Part (a): Total Mechanical Energy of the System

In a frictionless horizontal mass-spring system, the total mechanical energy EE is conserved and equals the sum of the elastic potential energy UU and the kinetic energy KK:

E=U+K=12kx2+12mv2E = U + K = \frac{1}{2}kx^2 + \frac{1}{2}mv^2

Since the block is released from rest at the maximum displacement (x=A=0.150 mx = A = 0.150\text{ m}), its instantaneous speed is v=0v = 0. Therefore, all mechanical energy at this point is stored as elastic potential energy:

E=12kA2E = \frac{1}{2}kA^2

Substitute the given values (k=160 N/mk = 160\text{ N/m} and A=0.150 mA = 0.150\text{ m}):

E=12(160 N/m)(0.150 m)2E = \frac{1}{2}(160\text{ N/m})(0.150\text{ m})^2

E=80⋅0.0225 J=1.80 JE = 80 \cdot 0.0225\text{ J} = 1.80\text{ J}


Part (b): Kinetic Energy and Speed at x=+0.0900 mx = +0.0900\text{ m}

Because the surface is frictionless, total mechanical energy remains constant at E=1.80 JE = 1.80\text{ J} at any position.

  1. Calculate the potential energy at x=+0.0900 mx = +0.0900\text{ m}:

    U=12kx2U = \frac{1}{2}kx^2

    U=12(160 N/m)(0.0900 m)2U = \frac{1}{2}(160\text{ N/m})(0.0900\text{ m})^2

    U=80⋅0.0081 J=0.648 JU = 80 \cdot 0.0081\text{ J} = 0.648\text{ J}

  2. Find the kinetic energy KK using conservation of energy:

    K=E−UK = E - U

    K=1.80 J−0.648 J=1.152 J≈1.15 JK = 1.80\text{ J} - 0.648\text{ J} = 1.152\text{ J} \approx 1.15\text{ J}

  3. Determine the speed vv of the block:

    Relate kinetic energy to speed using K=12mv2K = \frac{1}{2}mv^2:

    v=2Kmv = \sqrt{\frac{2K}{m}}

    Substitute K=1.152 JK = 1.152\text{ J} and m=0.400 kgm = 0.400\text{ kg}:

    v=2(1.152 J)0.400 kg=2.3040.400=5.76=2.40 m/sv = \sqrt{\frac{2(1.152\text{ J})}{0.400\text{ kg}}} = \sqrt{\frac{2.304}{0.400}} = \sqrt{5.76} = 2.40\text{ m/s}

Pitfall to avoid: When finding speed from kinetic energy, round only at the very final step; using the unrounded value K=1.152 JK = 1.152\text{ J} gives the exact square root 5.76=2.40 m/s\sqrt{5.76} = 2.40\text{ m/s}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the amplitude when calculating the total mechanical energy, leading to an incorrect total energy and incorrect subsequent kinetic energy and speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    E=12∗k∗A  ⟹  E=0.5∗160∗0.150  ⟹  E=12.0 JE = \frac{1}{2} * k * A \implies E = 0.5 * 160 * 0.150 \implies E = 12.0\text{ J}

    Correct

    E=12kA2=12(160 N/m)(0.150 m)2=1.80 JE = \frac{1}{2}kA^2 = \frac{1}{2}(160\text{ N/m})(0.150\text{ m})^2 = 1.80\text{ J}

    You omitted the square on the amplitude AA. The elastic potential energy at maximum displacement is E=12kA2E = \frac{1}{2}kA^2, which gives 1.80 J1.80\text{ J} rather than 12.0 J12.0\text{ J}.

  2. Step 2

    U=12∗k∗x2=0.5∗160∗(0.0900)2=0.648 J  ⟹  K=E−U=12.0−0.648=11.352 JU = \frac{1}{2} * k * x^2 = 0.5 * 160 * (0.0900)^2 = 0.648\text{ J} \implies K = E - U = 12.0 - 0.648 = 11.352\text{ J}

    Correct

    U=12kx2=0.648 J  ⟹  K=E−U=1.80 J−0.648 J=1.152 J≈1.15 JU = \frac{1}{2}kx^2 = 0.648\text{ J} \implies K = E - U = 1.80\text{ J} - 0.648\text{ J} = 1.152\text{ J} \approx 1.15\text{ J}

    Your formula U=12kx2U = \frac{1}{2}kx^2 and the energy subtraction K=E−UK = E - U are completely correct. However, your kinetic energy value is affected by using the incorrect total energy E=12.0 JE = 12.0\text{ J} from Step 1.

  3. Step 3

    v=2Km=2∗11.3520.400  ⟹  v=7.53 m/sv = \sqrt{\frac{2K}{m}} = \sqrt{\frac{2 * 11.352}{0.400}} \implies v = 7.53\text{ m/s}

    Correct

    v=2Km=2(1.152 J)0.400 kg=2.40 m/sv = \sqrt{\frac{2K}{m}} = \sqrt{\frac{2(1.152\text{ J})}{0.400\text{ kg}}} = 2.40\text{ m/s}

    You correctly related speed to kinetic energy using v=2Kmv = \sqrt{\frac{2K}{m}}, but substituting the propagated value K=11.352 JK = 11.352\text{ J} led to an incorrect final speed.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that total energy is stored entirely as spring potential energy at the release point.

You accurately squared the position when finding the potential energy U=12kx2U = \frac{1}{2}kx^2 at x=0.0900 mx = 0.0900\text{ m}.

You properly applied the work-energy relationship K=E−UK = E - U and isolated v=2Kmv = \sqrt{\frac{2K}{m}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula omission: omitted exponent

You wrote E=12kAE = \frac{1}{2}kA instead of E=12kA2E = \frac{1}{2}kA^2, omitting the square on the amplitude even though you remembered to square xx in the very next line.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing linear spring force (F=kxF = kx) with quadratic spring potential energy (U=12kx2U = \frac{1}{2}kx^2) often causes students to drop the exponent 2 when writing the total energy formula at the turning points.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional and Formula Check
  • Every quadratic energy expression in simple harmonic motion must contain a squared length factor: E=12kA2E = \frac{1}{2}kA^2.

  • Always verify that your displacement or amplitude variable carries an exponent of 2 before substituting numbers into energy equations.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the total mechanical energy with the squared amplitude: E=12(160 N/m)(0.150 m)2=80⋅0.0225=1.80 JE = \frac{1}{2}(160\text{ N/m})(0.150\text{ m})^2 = 80 \cdot 0.0225 = 1.80\text{ J}.

  2. Subtract the potential energy at x=0.0900 mx = 0.0900\text{ m} (U=0.648 JU = 0.648\text{ J}) from the corrected total energy: K=1.80 J−0.648 J=1.152 J≈1.15 JK = 1.80\text{ J} - 0.648\text{ J} = 1.152\text{ J} \approx 1.15\text{ J}.

  3. Substitute the corrected kinetic energy into the velocity formula: v=2(1.152 J)0.400 kg=5.76=2.40 m/sv = \sqrt{\frac{2(1.152\text{ J})}{0.400\text{ kg}}} = \sqrt{5.76} = 2.40\text{ m/s}.

Final answer

(a) E=1.80 JE = 1.80\text{ J}; (b) K=1.15 JK = 1.15\text{ J}, v=2.40 m/sv = 2.40\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that every potential energy formula for a spring includes x2x^2 or A2A^2 before plugging in numbers.

  • Perform a quick unit check: N/m⋅m=N\text{N/m} \cdot \text{m} = \text{N} (a force), whereas N/m⋅m2=N⋅m=J\text{N/m} \cdot \text{m}^2 = \text{N}\cdot\text{m} = \text{J} (an energy).

OverviewACEpath Teacher's Diagnosis

02 The student calculates kinetic energy by directly using displacement x in (1/2)kx² rather than subtracting potential energy from total energy, confusing potential energy at position x with kinetic energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    E=12kA2  ⟹  E=0.5⋅160⋅(0.150)2  ⟹  E=1.80 JE = \frac{1}{2}kA^2 \implies E = 0.5 \cdot 160 \cdot (0.150)^2 \implies E = 1.80\text{ J}

  2. Step 2

    K=12kx2  ⟹  K=0.5⋅160⋅(0.0900)2=0.648 JK = \frac{1}{2}kx^2 \implies K = 0.5 \cdot 160 \cdot (0.0900)^2 = 0.648\text{ J}

    Correct

    U=12kx2=0.648 J  ⟹  K=E−U=1.80 J−0.648 J=1.152 J≈1.15 JU = \frac{1}{2}kx^2 = 0.648\text{ J} \implies K = E - U = 1.80\text{ J} - 0.648\text{ J} = 1.152\text{ J} \approx 1.15\text{ J}

    You calculated 12kx2\frac{1}{2}kx^2, which represents the elastic potential energy UU stored in the spring at displacement xx, not the kinetic energy KK. To find KK, you need to subtract UU from the total energy EE.

  3. Step 3

    v=2Km=2⋅0.6480.400=3.24=1.80 m/sv = \sqrt{\frac{2K}{m}} = \sqrt{\frac{2 \cdot 0.648}{0.400}} = \sqrt{3.24} = 1.80\text{ m/s}

    Correct

    v=2Km=2(1.152 J)0.400 kg=5.76=2.40 m/sv = \sqrt{\frac{2K}{m}} = \sqrt{\frac{2(1.152\text{ J})}{0.400\text{ kg}}} = \sqrt{5.76} = 2.40\text{ m/s}

    Your algebraic formula for speed from kinetic energy is correct, but your final numerical value is affected by substituting the incorrect value of KK from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the amplitude to calculate the total mechanical energy of the oscillator.

You correctly set up the relationship between speed and kinetic energy as v=2Kmv = \sqrt{\frac{2K}{m}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion between potential and kinetic energy

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the expression 12kx2\frac{1}{2}kx^2 as kinetic energy rather than elastic potential energy. In simple harmonic motion, spring displacement xx determines potential energy, while kinetic energy comes from 12mv2\frac{1}{2}mv^2 or energy conservation K=E−U(x)K = E - U(x).

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Potential Energy and Kinetic Energy
  • Elastic potential energy is U(x)=12kx2U(x) = \frac{1}{2}kx^2, whereas kinetic energy is K=12mv2K = \frac{1}{2}mv^2.

  • Always associate 12kx2\frac{1}{2}kx^2 with stored potential energy in the spring, not motion.

Use Conservation of Mechanical Energy
  • Etotal=K+U=constantE_{\text{total}} = K + U = \text{constant}.

  • When displacement xx is known, compute U=12kx2U = \frac{1}{2}kx^2 first, then subtract to find K=E−UK = E - U before solving for velocity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the elastic potential energy at x=0.0900 mx = 0.0900\text{ m}: U=12kx2=12(160)(0.0900)2=0.648 JU = \frac{1}{2}kx^2 = \frac{1}{2}(160)(0.0900)^2 = 0.648\text{ J}.

  2. Apply conservation of mechanical energy to solve for KK: K=E−U=1.80 J−0.648 J=1.152 J≈1.15 JK = E - U = 1.80\text{ J} - 0.648\text{ J} = 1.152\text{ J} \approx 1.15\text{ J}.

  3. Calculate speed using the correct kinetic energy: v=2Km=2(1.152)0.400=5.76=2.40 m/sv = \sqrt{\frac{2K}{m}} = \sqrt{\frac{2(1.152)}{0.400}} = \sqrt{5.76} = 2.40\text{ m/s}.

Final answer

K=1.15 JK = 1.15\text{ J} (or 1.152 J1.152\text{ J}), v=2.40 m/sv = 2.40\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definitions of elastic potential energy U=12kx2U = \frac{1}{2}kx^2 versus kinetic energy K=12mv2K = \frac{1}{2}mv^2.

  • Practice using the energy balance equation E=K+UE = K + U to find unknown energies at intermediate positions in oscillations.

OverviewACEpath Teacher's Diagnosis

03 The student omits the factor of 2 in the relationship between kinetic energy and speed, using v = √(K/m) instead of v = √(2K/m).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    E=12×k×A2  ⟹  E=0.5×160×(0.150)2  ⟹  E=1.80 JE = \frac{1}{2} \times k \times A^2 \implies E = 0.5 \times 160 \times (0.150)^2 \implies E = 1.80\text{ J}

  2. Step 2

    U=12×k×x2=0.5×160×(0.0900)2=0.648 J  ⟹  K=E−U=1.80−0.648=1.152 JU = \frac{1}{2} \times k \times x^2 = 0.5 \times 160 \times (0.0900)^2 = 0.648\text{ J} \implies K = E - U = 1.80 - 0.648 = 1.152\text{ J}

  3. Step 3

    v=Km  ⟹  v=1.1520.400=2.88  ⟹  v=1.70 m/sv = \sqrt{\frac{K}{m}} \implies v = \sqrt{\frac{1.152}{0.400}} = \sqrt{2.88} \implies v = 1.70\text{ m/s}

    Correct

    v=2Km=2(1.152 J)0.400 kg=5.76=2.40 m/sv = \sqrt{\frac{2K}{m}} = \sqrt{\frac{2(1.152\text{ J})}{0.400\text{ kg}}} = \sqrt{5.76} = 2.40\text{ m/s}

    Because kinetic energy is defined as K=12mv2K = \frac{1}{2}mv^2, isolating velocity requires multiplying by 22 before dividing by mass and taking the square root.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total mechanical energy using the amplitude and spring constant.

You applied energy conservation accurately to find the kinetic energy at the given position.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Factor of 2 in Velocity Inversion

You wrote v=Kmv = \sqrt{\frac{K}{m}} instead of v=2Kmv = \sqrt{\frac{2K}{m}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You missed the factor of 12\frac{1}{2} when rearranging the definition of kinetic energy K=12mv2K = \frac{1}{2}mv^2 to solve for speed vv.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate $v$ from Kinetic Energy
  • Since K=12mv2K = \frac{1}{2}mv^2, multiplying both sides by 22 yields 2K=mv22K = mv^2, which gives v=2Kmv = \sqrt{\frac{2K}{m}}.

  • Always carry out the two-step inversion explicitly: multiply by 22, then divide by mm, before taking the square root.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the correct relation between kinetic energy and speed: v=2Kmv = \sqrt{\frac{2K}{m}}.

  2. Substitute the known values: v=2(1.152 J)0.400 kg=5.76 m2/s2v = \sqrt{\frac{2(1.152\text{ J})}{0.400\text{ kg}}} = \sqrt{5.76\text{ m}^2/\text{s}^2}.

  3. Take the square root: v=2.40 m/sv = 2.40\text{ m/s}.

Final answer

(a) E=1.80 JE = 1.80\text{ J}; (b) K=1.15 JK = 1.15\text{ J}, v=2.40 m/sv = 2.40\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • When isolating variables in energy formulas involving 12\frac{1}{2}, write down the base formula first before taking the square root.

  • Check that dimensional units stay consistent: 2Km\frac{2K}{m} has units of Jkg=m2/s2\frac{\text{J}}{\text{kg}} = \text{m}^2/\text{s}^2.

Lock it in

Similar question

01

A horizontal mass-spring oscillator has a spring constant of k=250 N/mk = 250\text{ N/m} and an amplitude of A=0.20 mA = 0.20\text{ m}. What is the total mechanical energy EE of the oscillator?

Answer

E=5.0 JE = 5.0\text{ J}. Key steps: E=12kA2=12(250 N/m)(0.20 m)2=125×0.040=5.0 JE = \frac{1}{2}kA^2 = \frac{1}{2}(250\text{ N/m})(0.20\text{ m})^2 = 125 \times 0.040 = 5.0\text{ J}.

02

A 0.500 kg0.500\text{ kg} block on a frictionless surface is attached to a spring with k=200 N/mk = 200\text{ N/m} and oscillates with amplitude A=0.100 mA = 0.100\text{ m}. Find the kinetic energy KK of the block when it passes through x=0.0600 mx = 0.0600\text{ m}.

Answer

K=0.640 JK = 0.640\text{ J}. Key steps: Total energy E=12kA2=12(200)(0.100)2=1.00 JE = \frac{1}{2}kA^2 = \frac{1}{2}(200)(0.100)^2 = 1.00\text{ J}. Potential energy U=12kx2=12(200)(0.0600)2=0.360 JU = \frac{1}{2}kx^2 = \frac{1}{2}(200)(0.0600)^2 = 0.360\text{ J}. Then K=E−U=1.00−0.360=0.640 JK = E - U = 1.00 - 0.360 = 0.640\text{ J}.

03

A 0.250 kg0.250\text{ kg} object on a spring oscillates with an amplitude of 0.300 m0.300\text{ m}. When the object is at x=0.180 mx = 0.180\text{ m}, its speed is measured to be 4.80 m/s4.80\text{ m/s}. Find (a) the spring constant kk and (b) the total mechanical energy EE of the system.

Answer

(a) k=83.3 N/mk = 83.3\text{ N/m}; (b) E=3.75 JE = 3.75\text{ J}. Key steps: From conservation of energy, 12kA2=12kx2+12mv2  ⟹  12k(A2−x2)=12mv2\frac{1}{2}kA^2 = \frac{1}{2}kx^2 + \frac{1}{2}mv^2 \implies \frac{1}{2}k(A^2 - x^2) = \frac{1}{2}mv^2. Thus k=mv2A2−x2=0.250×(4.80)2(0.300)2−(0.180)2=5.760.0900−0.0324=5.760.0576=100 N/mk = \frac{mv^2}{A^2 - x^2} = \frac{0.250 \times (4.80)^2}{(0.300)^2 - (0.180)^2} = \frac{5.76}{0.0900 - 0.0324} = \frac{5.76}{0.0576} = 100\text{ N/m}. Then E=12kA2=12(100)(0.300)2=4.50 JE = \frac{1}{2}kA^2 = \frac{1}{2}(100)(0.300)^2 = 4.50\text{ J}.

Loading workspace…