Resources

A remote-controlled model vehicle travels along the positive xx-axis. Its motion is described by a piecewise-linear speed-time function v(t)v(t): from t=0 st = 0\text{ s} to t=5.0 st = 5.0\text{ s}, its speed increases from 0 m/s0\text{ m/s} to 10.0 m/s10.0\text{ m/s}; from t=5.0 st = 5.0\text{ s} to t=12.0 st = 12.0\text{ s}, its speed decreases steadily from 10.0 m/s10.0\text{ m/s} to 0 m/s0\text{ m/s}; and from t=12.0 st = 12.0\text{ s} to t=16.0 st = 16.0\text{ s}, its speed increases from 0 m/s0\text{ m/s} to 6.0 m/s6.0\text{ m/s}. Given that the vehicle maintains a constant forward direction along the +x+x-axis throughout the entire 16.0 s16.0\text{ s} period, determine the magnitude and sign of the vehicle's acceleration at t=8.0 st = 8.0\text{ s}, using standard 1D coordinate convention where motion along +x+x is positive.

Answer and steps

Final answer

−1.43 m/s2-1.43\text{ m/s}^2

Steps

01

Relate Speed to Velocity

Because the vehicle travels in a constant forward direction along the +x+x-axis throughout the entire motion, its velocity component vx(t)v_x(t) is equal to its speed v(t)v(t): vx(t)≥0v_x(t) \ge 0

Therefore, the speed-time description directly represents the velocity-time function vx(t)v_x(t) along the +x+x-axis.


02

Identify the Relevant Time Segment

The time of interest is t=8.0 st = 8.0\text{ s}, which falls within the second linear interval: t∈[5.0 s,12.0 s]t \in [5.0\text{ s}, 12.0\text{ s}]

During this interval, the velocity changes linearly from:

  • (t1,v1)=(5.0 s,10.0 m/s)(t_1, v_1) = (5.0\text{ s}, 10.0\text{ m/s})
  • to (t2,v2)=(12.0 s,0 m/s)(t_2, v_2) = (12.0\text{ s}, 0\text{ m/s})

03

Calculate the Acceleration

On a velocity-time graph, acceleration axa_x is represented by the slope of the line: ax=ΔvxΔt=v2−v1t2−t1a_x = \frac{\Delta v_x}{\Delta t} = \frac{v_2 - v_1}{t_2 - t_1}

Substitute the values for this interval: ax=0 m/s−10.0 m/s12.0 s−5.0 s=−10.0 m/s7.0 s≈−1.4286 m/s2a_x = \frac{0\text{ m/s} - 10.0\text{ m/s}}{12.0\text{ s} - 5.0\text{ s}} = \frac{-10.0\text{ m/s}}{7.0\text{ s}} \approx -1.4286\text{ m/s}^2

Rounding to three significant figures gives: ax=−1.43 m/s2a_x = -1.43\text{ m/s}^2


Pitfall to Avoid

  • Sign convention: Do not report just the positive magnitude (1.43 m/s21.43\text{ m/s}^2). Because the vehicle is moving in the +x+x direction and slowing down, its acceleration vector points in the opposite direction (−x-x), requiring a negative sign in standard 1D coordinate notation.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the slope as initial velocity minus final velocity, reversing the sign and incorrectly concluding the acceleration is positive.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    t=8.0 s is in the interval [5.0 s,12.0 s]t = 8.0\text{ s}\text{ is in the interval }[5.0\text{ s}, 12.0\text{ s}]

  2. Step 2

    a=vi−vfΔt=10.0−012.0−5.0  ⟹  a=10.07.0=1.43 m/s2a = \frac{v_i - v_f}{\Delta t} = \frac{10.0 - 0}{12.0 - 5.0} \implies a = \frac{10.0}{7.0} = 1.43\text{ m/s}^2

    Correct

    a=vf−viΔt=0−10.012.0−5.0=−10.07.0≈−1.43 m/s2a = \frac{v_f - v_i}{\Delta t} = \frac{0 - 10.0}{12.0 - 5.0} = \frac{-10.0}{7.0} \approx -1.43\text{ m/s}^2

    The change in velocity is defined as final velocity minus initial velocity (Δv=vf−vi\Delta v = v_f - v_i). You calculated vi−vfv_i - v_f, which inverted the sign of the acceleration.

  3. Step 3

    Sign is positive and magnitude is 1.43 m/s2\text{Sign is positive and magnitude is } 1.43\text{ m/s}^2

    Correct

    Sign is negative and magnitude is 1.43 m/s2 (or a=−1.43 m/s2)\text{Sign is negative and magnitude is } 1.43\text{ m/s}^2\text{ (or } a = -1.43\text{ m/s}^2\text{)}

    Because of the reversed subtraction in the preceding step, you concluded that the acceleration has a positive sign. Since the vehicle is moving forward and slowing down, its acceleration must be negative.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly located the time t=8.0 st = 8.0\text{ s} in the linear segment from 5.0 s5.0\text{ s} to 12.0 s12.0\text{ s}.

You correctly read the initial and final speeds for that segment (10.0 m/s10.0\text{ m/s} and 0 m/s0\text{ m/s}).

You accurately calculated the numerical quotient 10.07.0≈1.43 m/s2\frac{10.0}{7.0} \approx 1.43\text{ m/s}^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Definition of Change

You set up the slope using initial velocity minus final velocity (vi−vfv_i - v_f) rather than final velocity minus initial velocity (vf−viv_f - v_i).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the order of terms in calculating a physical change (Δv\Delta v). In physics, any change is always evaluated as final−initial\text{final} - \text{initial}, preserving the directional sign.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Delta
  • For any quantity QQ, the change over an interval is ΔQ=Qf−Qi\Delta Q = Q_f - Q_i, never Qi−QfQ_i - Q_f.

  • Always write down Δv=vf−vi\Delta v = v_f - v_i before plugging in numerical values.

Physical Reality Check for Deceleration
  • When an object moves in the positive direction (v>0v > 0) and slows down, its acceleration vector points opposite to velocity (a<0a < 0).

  • Check whether the speed is decreasing; if moving along +x+x and slowing down, confirm that your calculated aa is negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the definition of acceleration: a=ΔvΔt=vf−vitf−tia = \frac{\Delta v}{\Delta t} = \frac{v_f - v_i}{t_f - t_i}

  2. Substitute the boundary values of the interval: a=0 m/s−10.0 m/s12.0 s−5.0 s=−10.0 m/s7.0 sa = \frac{0\text{ m/s} - 10.0\text{ m/s}}{12.0\text{ s} - 5.0\text{ s}} = \frac{-10.0\text{ m/s}}{7.0\text{ s}}

  3. Evaluate and round to three significant figures: a≈−1.43 m/s2a \approx -1.43\text{ m/s}^2

Final answer

−1.43 m/s2 (magnitude 1.43 m/s2, sign is negative)-1.43\text{ m/s}^2\text{ (magnitude } 1.43\text{ m/s}^2\text{, sign is negative)}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the formal definition of change: Δx=xf−xi\Delta x = x_f - x_i and Δv=vf−vi\Delta v = v_f - v_i.

  • Practice matching the slope of velocity-time graph segments to the sign of acceleration (downward slope = negative slope = negative acceleration).

  • Perform a physical sanity check on deceleration problems: forward motion plus slowing down must yield a negative 1D acceleration.

OverviewACEpath Teacher's Diagnosis

02 The student divides the speed at the target time by the absolute time t = 8.0 s instead of computing the rate of change over the interval.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v(8.0)=10.0−(10.07.0⋅(8.0−5.0))=40.07.0 m/s≈5.71 m/sv(8.0) = 10.0 - \left(\frac{10.0}{7.0} \cdot (8.0 - 5.0)\right) = \frac{40.0}{7.0}\text{ m/s} \approx 5.71\text{ m/s}

  2. Step 2

    a=vt=5.718.0≈0.71 m/s2a = \frac{v}{t} = \frac{5.71}{8.0} \approx 0.71\text{ m/s}^2

    Correct

    a=ΔvΔt=0 m/s−10.0 m/s12.0 s−5.0 s=−10.0 m/s7.0 s≈−1.43 m/s2a = \frac{\Delta v}{\Delta t} = \frac{0\text{ m/s} - 10.0\text{ m/s}}{12.0\text{ s} - 5.0\text{ s}} = \frac{-10.0\text{ m/s}}{7.0\text{ s}} \approx -1.43\text{ m/s}^2

    Acceleration is defined as the rate of change of velocity, a=ΔvΔta = \frac{\Delta v}{\Delta t}, which corresponds to the slope of the velocity-time segment. Dividing the current velocity by the total elapsed time, vt\frac{v}{t}, does not yield the acceleration unless the object accelerates uniformly from rest at t=0 st = 0\text{ s}.

  3. Step 3

    Sign is positive and magnitude is \text{Sign is positive and magnitude is } 0.71 m/s\text{ m/s}^2

    Correct

    a = -1.43 m/s\text{ m/s}^2  (negative sign, magnitude \text{ (negative sign, magnitude } 1.43 m/s\text{ m/s}^2)\text{)}

    Because this conclusion relied on the formula a=vta = \frac{v}{t}, both the calculated magnitude and sign are incorrect. Since the vehicle is moving in the +x+x direction and slowing down, the slope is negative.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the vehicle is in the second motion segment between t=5.0 st = 5.0\text{ s} and t=12.0 st = 12.0\text{ s}.

You accurately computed the instantaneous speed of 5.71 m/s5.71\text{ m/s} at t=8.0 st = 8.0\text{ s} using the linear rate of decrease.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Used v/t instead of slope (delta v / delta t)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated acceleration as the ratio of instantaneous velocity to clock time (a=vta = \frac{v}{t}) instead of the slope of the velocity-time graph (a=ΔvΔta = \frac{\Delta v}{\Delta t}). Because the motion consists of piecewise-linear intervals with non-zero initial velocities, acceleration is given by the slope of the segment containing the target time.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Acceleration
  • Acceleration is the time rate of change of velocity: a=ΔvΔt=v2−v1t2−t1a = \frac{\Delta v}{\Delta t} = \frac{v_2 - v_1}{t_2 - t_1}.

  • Identify the endpoints (t1,v1)(t_1, v_1) and (t2,v2)(t_2, v_2) of the linear interval containing the target time and calculate the slope.

Determining the Sign of Acceleration
  • When an object moves in the positive direction and slows down, its acceleration is negative.

  • Check whether the slope on the v–tv\text{--}t graph is tilting downward (Δv<0\Delta v < 0) to assign the correct negative sign.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the segment containing t=8.0 st = 8.0\text{ s}: the linear interval is [5.0 s,12.0 s][5.0\text{ s}, 12.0\text{ s}] with (t1,v1)=(5.0 s,10.0 m/s)(t_1, v_1) = (5.0\text{ s}, 10.0\text{ m/s}) and (t2,v2)=(12.0 s,0 m/s)(t_2, v_2) = (12.0\text{ s}, 0\text{ m/s}).

  2. Calculate the slope of this line segment: a=v2−v1t2−t1=0−10.012.0−5.0=−10.0 m/s7.0 s≈−1.43 m/s2a = \frac{v_2 - v_1}{t_2 - t_1} = \frac{0 - 10.0}{12.0 - 5.0} = \frac{-10.0\text{ m/s}}{7.0\text{ s}} \approx -1.43\text{ m/s}^2.

Final answer

−1.43 m/s2-1.43\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that on any velocity-time graph, acceleration is the slope of the line, not the point value divided by time.

  • Whenever an object moves in the +x+x direction while its speed decreases, always verify that your calculated acceleration carries a negative sign.

OverviewACEpath Teacher's Diagnosis

03 The student ignores the negative sign indicating deceleration opposing the positive velocity direction, reporting a positive sign for the acceleration vector.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Interval is from 5.0 s5.0\text{ s} to 12.0 s  ⟹  a=0−10.012.0−5.0=−10.07.0≈−1.43 m/s212.0\text{ s} \implies a = \frac{0 - 10.0}{12.0 - 5.0} = \frac{-10.0}{7.0} \approx -1.43\text{ m/s}^2

  2. Step 2

    Since the vehicle moves in the +x+x direction, the sign of acceleration is positive and magnitude is 1.43 m/s21.43\text{ m/s}^2

    Correct

    Because the vehicle is moving in the +x+x direction while slowing down, the acceleration vector points in the −x-x direction, so the sign is negative: ax=−1.43 m/s2a_x = -1.43\text{ m/s}^2 (magnitude 1.43 m/s21.43\text{ m/s}^2).

    Moving in the +x+x direction means velocity is positive, not acceleration. Because speed is decreasing, acceleration opposes the velocity, meaning its sign is negative along the +x+x-axis.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly selected the time interval [5.0 s,12.0 s][5.0\text{ s}, 12.0\text{ s}] that contains t=8.0 st = 8.0\text{ s}.

You set up the rate of change ΔvΔt\frac{\Delta v}{\Delta t} properly and calculated −1.43 m/s2-1.43\text{ m/s}^2 accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Velocity Sign Confused with Acceleration Sign

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the sign of acceleration with the direction of travel rather than the direction of velocity change. A positive velocity combined with a decreasing speed implies acceleration points in the negative coordinate direction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Velocity Sign vs. Acceleration Sign
  • Velocity sign indicates the direction of motion, whereas acceleration sign indicates the direction in which velocity changes.

  • Always keep the sign obtained from ax=ΔvxΔta_x = \frac{\Delta v_x}{\Delta t}; if an object moves forward (vx>0v_x > 0) but slows down (Δvx<0\Delta v_x < 0), axa_x is strictly negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that vx(t)>0v_x(t) > 0 means motion is in the +x+x direction, but speed is dropping from 10.0 m/s10.0\text{ m/s} to 0 m/s0\text{ m/s}.

  2. The slope ΔvxΔt=−1.43 m/s2\frac{\Delta v_x}{\Delta t} = -1.43\text{ m/s}^2 already accounts for direction along the 1D axis.

  3. State the magnitude as 1.43 m/s21.43\text{ m/s}^2 and the sign as negative (or ax=−1.43 m/s2a_x = -1.43\text{ m/s}^2).

Final answer

Magnitude is 1.43 m/s21.43\text{ m/s}^2, and the sign is negative (ax=−1.43 m/s2a_x = -1.43\text{ m/s}^2)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing between what velocity sign tells you (direction of motion) and what acceleration sign tells you (speeding up vs. slowing down relative to that direction).

  • Trust the algebraic sign resulting from vf−vitf−ti\frac{v_f - v_i}{t_f - t_i} when 1D coordinate axes are established.

Lock it in

Similar question

01

A skateboarder travels along the +x+x-axis. At t=2.0 st = 2.0\text{ s}, the skateboarder's velocity is +8.0 m/s+8.0\text{ m/s}, and at t=6.0 st = 6.0\text{ s}, it has decreased steadily to +2.0 m/s+2.0\text{ m/s}. Find the skateboarder's acceleration (both magnitude and sign) during this interval.

Answer

−1.5 m/s2-1.5\text{ m/s}^2 (magnitude 1.5 m/s21.5\text{ m/s}^2, sign is negative).

Key steps: a=vf−vitf−ti=2.0−8.06.0−2.0=−6.04.0=−1.5 m/s2a = \frac{v_f - v_i}{t_f - t_i} = \frac{2.0 - 8.0}{6.0 - 2.0} = \frac{-6.0}{4.0} = -1.5\text{ m/s}^2.

02

A train moving along a straight track in the +x+x direction has velocity vx(t)v_x(t). Between t=10.0 st = 10.0\text{ s} and t=25.0 st = 25.0\text{ s}, the velocity-time graph is a straight line sloping downward from vx(10.0)=30.0 m/sv_x(10.0) = 30.0\text{ m/s} to vx(25.0)=6.0 m/sv_x(25.0) = 6.0\text{ m/s}. Determine the acceleration axa_x at t=18.0 st = 18.0\text{ s}.

Answer

−1.60 m/s2-1.60\text{ m/s}^2.

Key steps: Since the segment is linear, acceleration is constant across the entire interval: ax=vf−viΔt=6.0 m/s−30.0 m/s25.0 s−10.0 s=−24.0 m/s15.0 s=−1.60 m/s2a_x = \frac{v_f - v_i}{\Delta t} = \frac{6.0\text{ m/s} - 30.0\text{ m/s}}{25.0\text{ s} - 10.0\text{ s}} = \frac{-24.0\text{ m/s}}{15.0\text{ s}} = -1.60\text{ m/s}^2.

03

An elevator cab moves upward (defined as +y+y). Over a 4.0 s4.0\text{ s} braking period, its velocity changes steadily from +5.0 m/s+5.0\text{ m/s} to 0 m/s0\text{ m/s}. During the next 2.0 s2.0\text{ s}, it remains at rest. Then over the following 3.0 s3.0\text{ s}, it accelerates downward to −4.5 m/s-4.5\text{ m/s}. Compare the signs and magnitudes of the cab's acceleration during the first interval (braking while going up) and the third interval (speeding up while going down).

Answer

Interval 1: a1=−1.25 m/s2a_1 = -1.25\text{ m/s}^2 (magnitude 1.25 m/s21.25\text{ m/s}^2, sign negative). Interval 3: a3=−1.50 m/s2a_3 = -1.50\text{ m/s}^2 (magnitude 1.50 m/s21.50\text{ m/s}^2, sign negative). Both accelerations have a negative sign.

Key steps:

  1. a1=0−(+5.0)4.0=−1.25 m/s2a_1 = \frac{0 - (+5.0)}{4.0} = -1.25\text{ m/s}^2.
  2. a3=−4.5−03.0=−1.50 m/s2a_3 = \frac{-4.5 - 0}{3.0} = -1.50\text{ m/s}^2.
Loading workspace…