Resources

A flywheel rotating in the counterclockwise direction with an initial frequency of f0=15.0 rev/sf_0 = 15.0\text{ rev/s} experiences a constant opposing frictional angular acceleration of magnitude α=2.50 rad/s2\alpha = 2.50\text{ rad/s}^2. Defining the counterclockwise direction as positive: (a) determine the rotational frequency ff of the flywheel at time t=12.0 st = 12.0\text{ s}; (b) find the period TT of rotation at that instant; and (c) compute the total time tstopt_{\text{stop}} required for the flywheel to come to a complete stop.

Answer and steps

Final answer

(a) f=10.2 rev/sf = 10.2\text{ rev/s}; (b) T=0.0978 sT = 0.0978\text{ s}; (c) tstop=37.7 st_{\text{stop}} = 37.7\text{ s}

Steps

01

Identify Given Values and Coordinate Signs

The counterclockwise direction is defined as positive.

  • Initial frequency: f0=15.0 rev/sf_0 = 15.0\text{ rev/s}
  • Initial angular velocity: ω0=2πf0=2π(15.0 rev/s)=30π rad/s≈94.25 rad/s\omega_0 = 2\pi f_0 = 2\pi(15.0\text{ rev/s}) = 30\pi\text{ rad/s} \approx 94.25\text{ rad/s}
  • Angular acceleration: Since the frictional torque opposes the counterclockwise rotation, the angular acceleration is negative: α=−2.50 rad/s2\alpha = -2.50\text{ rad/s}^2

02

(a) Determine the Rotational Frequency at t=12.0 st = 12.0\text{ s}

Using the rotational kinematic equation for constant angular acceleration: ω=ω0+αt\omega = \omega_0 + \alpha t

Substitute the values at t=12.0 st = 12.0\text{ s}: ω=30π rad/s+(−2.50 rad/s2)(12.0 s)=30π−30.0≈64.25 rad/s\omega = 30\pi\text{ rad/s} + (-2.50\text{ rad/s}^2)(12.0\text{ s}) = 30\pi - 30.0 \approx 64.25\text{ rad/s}

Convert the angular velocity back to rotational frequency ff using f=ω2πf = \dfrac{\omega}{2\pi}: f=64.25 rad/s2π rad/rev≈10.225 rev/s≈10.2 rev/sf = \frac{64.25\text{ rad/s}}{2\pi\text{ rad/rev}} \approx 10.225\text{ rev/s} \approx 10.2\text{ rev/s}

Pitfall to avoid: Angular acceleration is given in rad/s2\text{rad/s}^2, whereas initial frequency is in rev/s\text{rev/s}. You must convert between radians and revolutions (Δθ=2π rad=1 rev\Delta\theta = 2\pi\text{ rad} = 1\text{ rev}) before combining them in the kinematic equations.


03

(b) Find the Period of Rotation at t=12.0 st = 12.0\text{ s}

The rotational period TT is the reciprocal of the frequency: T=1fT = \frac{1}{f}

Using the unrounded frequency f≈10.225 rev/sf \approx 10.225\text{ rev/s}: T=110.225 s−1≈0.0978 sT = \frac{1}{10.225\text{ s}^{-1}} \approx 0.0978\text{ s}


04

(c) Compute the Time Required to Stop

At the moment the flywheel comes to a complete stop, its angular velocity is zero (ωstop=0\omega_{\text{stop}} = 0).

Using the kinematic relation: ωstop=ω0+αtstop\omega_{\text{stop}} = \omega_0 + \alpha t_{\text{stop}} 0=30π rad/s−(2.50 rad/s2)tstop0 = 30\pi\text{ rad/s} - (2.50\text{ rad/s}^2) t_{\text{stop}}

Solving for tstopt_{\text{stop}}: tstop=30π rad/s2.50 rad/s2=12π s≈37.7 st_{\text{stop}} = \frac{30\pi\text{ rad/s}}{2.50\text{ rad/s}^2} = 12\pi\text{ s} \approx 37.7\text{ s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert initial frequency in rev/s to angular velocity in rad/s, treating f as ω directly.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ω0=15.0 rad/s\omega_0 = 15.0\text{ rad/s}

    Correct

    ω0=2πf0=2π(15.0 rev/s)=30π rad/s≈94.25 rad/s\omega_0 = 2\pi f_0 = 2\pi(15.0\text{ rev/s}) = 30\pi\text{ rad/s} \approx 94.25\text{ rad/s}

    The problem provides the initial rotational frequency as f0=15.0 rev/sf_0 = 15.0\text{ rev/s}. Because angular acceleration is given in rad/s2\text{rad/s}^2, you must convert frequency from revolutions per second to radians per second using ω0=2πf0\omega_0 = 2\pi f_0 before using standard kinematic equations.

  2. Step 2

    ω=ω0−αt=15.0−2.50(12.0)=15.0−30.0=−15.0 rad/s  ⟹  f=−15.02π=−2.39 rev/s\omega = \omega_0 - \alpha t = 15.0 - 2.50(12.0) = 15.0 - 30.0 = -15.0\text{ rad/s} \implies f = \frac{-15.0}{2\pi} = -2.39\text{ rev/s}

    Correct

    ω=30π−(2.50)(12.0)≈64.25 rad/s  ⟹  f=64.252π≈10.2 rev/s\omega = 30\pi - (2.50)(12.0) \approx 64.25\text{ rad/s} \implies f = \frac{64.25}{2\pi} \approx 10.2\text{ rev/s}

    Your kinematic formula ω=ω0+αt\omega = \omega_0 + \alpha t and conversion f=ω2πf = \frac{\omega}{2\pi} are conceptually sound, but the result is affected by substituting ω0=15.0 rad/s\omega_0 = 15.0\text{ rad/s} instead of 30π rad/s30\pi\text{ rad/s}.

  3. Step 3

    T=1∣f∣=12.39=0.418 sT = \frac{1}{|f|} = \frac{1}{2.39} = 0.418\text{ s}

    Correct

    T=1f=110.225 s−1≈0.0978 sT = \frac{1}{f} = \frac{1}{10.225\text{ s}^{-1}} \approx 0.0978\text{ s}

    You correctly related the rotational period to the reciprocal of frequency, but your numerical value propagated from the previous step.

  4. Step 4

    0=ω0−αtstop  ⟹  tstop=15.02.50=6.00 s0 = \omega_0 - \alpha t_{\text{stop}} \implies t_{\text{stop}} = \frac{15.0}{2.50} = 6.00\text{ s}

    Correct

    0=30π−2.50tstop  ⟹  tstop=30π2.50=12π s≈37.7 s0 = 30\pi - 2.50 t_{\text{stop}} \implies t_{\text{stop}} = \frac{30\pi}{2.50} = 12\pi\text{ s} \approx 37.7\text{ s}

    Your condition for coming to a complete stop (ω=0\omega = 0) and algebraic rearrangement are correct, but the calculated time is affected by the incorrect value of ω0\omega_0.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly chose the constant-acceleration rotational kinematic equation ω=ω0+αt\omega = \omega_0 + \alpha t.

You correctly applied the relationship T=1fT = \frac{1}{f} to find the rotational period.

You accurately identified that a complete stop corresponds to an angular velocity of zero.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Units & Conversions

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You equated rotational frequency ff (measured in revolutions per second) directly with angular velocity ω\omega (measured in radians per second), omitting the conversion factor of 2π rad/rev2\pi\text{ rad/rev}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Units Before Substituting
  • Always verify that angular quantities share consistent angular units (radians vs. revolutions) before substituting into kinematic formulas: ω=2πf\omega = 2\pi f.

  • When given ff in rev/s\text{rev/s} and α\alpha in rad/s2\text{rad/s}^2, convert ff to ω=2πf\omega = 2\pi f in rad/s\text{rad/s} immediately.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the initial frequency to angular velocity: ω0=2πf0=2π(15.0 rev/s)=30π rad/s≈94.25 rad/s\omega_0 = 2\pi f_0 = 2\pi(15.0\text{ rev/s}) = 30\pi\text{ rad/s} \approx 94.25\text{ rad/s}.

  2. Find the angular velocity and frequency at t=12.0 st = 12.0\text{ s}: ω=30π−(2.50)(12.0)=30π−30.0≈64.25 rad/s\omega = 30\pi - (2.50)(12.0) = 30\pi - 30.0 \approx 64.25\text{ rad/s}, so f=ω2π≈10.2 rev/sf = \frac{\omega}{2\pi} \approx 10.2\text{ rev/s}.

  3. Calculate the rotational period: T=1f≈110.225 s−1≈0.0978 sT = \frac{1}{f} \approx \frac{1}{10.225\text{ s}^{-1}} \approx 0.0978\text{ s}.

  4. Solve for the stopping time with ωstop=0\omega_{\text{stop}} = 0: tstop=ω0α=30π rad/s2.50 rad/s2=12π s≈37.7 st_{\text{stop}} = \frac{\omega_0}{\alpha} = \frac{30\pi\text{ rad/s}}{2.50\text{ rad/s}^2} = 12\pi\text{ s} \approx 37.7\text{ s}.

Final answer

(a) f=10.2 rev/sf = 10.2\text{ rev/s}; (b) T=0.0978 sT = 0.0978\text{ s}; (c) tstop=37.7 st_{\text{stop}} = 37.7\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting between angular quantities in revolutions and radians before writing down kinematic equations.

  • Always perform a quick unit check on each term in ω=ω0+αt\omega = \omega_0 + \alpha t to ensure every term has units of rad/s\text{rad/s}.

OverviewACEpath Teacher's Diagnosis

02 The student treats the opposing acceleration as positive rather than negative, causing the flywheel to speed up instead of slow down.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω0=2π(15.0)=94.25 rad/s\omega_0 = 2\pi(15.0) = 94.25\text{ rad/s}

  2. Step 2

    ω=ω0+αt=94.25+2.50(12.0)=94.25+30.0=124.25 rad/s  ⟹  f=124.252π=19.8 rev/s\omega = \omega_0 + \alpha t = 94.25 + 2.50(12.0) = 94.25 + 30.0 = 124.25\text{ rad/s} \implies f = \frac{124.25}{2\pi} = 19.8\text{ rev/s}

    Correct

    ω=ω0+αt=94.25 rad/s+(−2.50 rad/s2)(12.0 s)=64.25 rad/s  ⟹  f=64.252π≈10.2 rev/s\omega = \omega_0 + \alpha t = 94.25\text{ rad/s} + (-2.50\text{ rad/s}^2)(12.0\text{ s}) = 64.25\text{ rad/s} \implies f = \frac{64.25}{2\pi} \approx 10.2\text{ rev/s}

    The friction opposes the positive counterclockwise rotation, so the angular acceleration must be entered as α=−2.50 rad/s2\alpha = -2.50\text{ rad/s}^2. Using a positive value caused the flywheel to speed up instead of decelerating.

  3. Step 3

    T=1f=119.8=0.0505 sT = \frac{1}{f} = \frac{1}{19.8} = 0.0505\text{ s}

    Correct

    T=1f=110.225 s−1≈0.0978 sT = \frac{1}{f} = \frac{1}{10.225\text{ s}^{-1}} \approx 0.0978\text{ s}

    You applied the correct reciprocal relationship T=1fT = \frac{1}{f}, but your numerical result was affected by the incorrect frequency from the previous step.

  4. Step 4

    ω=ω0−αtstop=0  ⟹  tstop=94.252.50=37.7 s\omega = \omega_0 - \alpha t_{\text{stop}} = 0 \implies t_{\text{stop}} = \frac{94.25}{2.50} = 37.7\text{ s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used ω=2πf\omega = 2\pi f to convert frequency to angular velocity.

You used the correct relationship T=1fT = \frac{1}{f} to find the rotational period.

You correctly set the final angular velocity to zero and solved for the stopping time in part (c).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error in deceleration

You accidentally added rather than subtracted the angular velocity change in part (a), even though you correctly recognized the deceleration in part (c).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inconsistent coordinate sign assignment: when angular acceleration opposes the positive direction of motion, its algebraic value in kinematic formulas must carry a negative sign.

REASONING PATH
Your ACEpath teacher’s suggested approach
Establish Coordinate Signs Early
  • If positive rotation is defined (e.g., counterclockwise), any opposing effect (such as friction or braking) must have a negative acceleration: α<0\alpha < 0.

  • Always explicitly write α=−2.50 rad/s2\alpha = -2.50\text{ rad/s}^2 in your given list before substituting into kinematic formulas.

Sanity Check Velocity Trends
  • An opposing force or torque must decrease the magnitude of velocity over time.

  • Verify that ∣ω(t)∣<∣ω0∣|ω(t)| < |ω_0| when the system is slowing down.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute α=−2.50 rad/s2\alpha = -2.50\text{ rad/s}^2: ω=94.25 rad/s−(2.50 rad/s2)(12.0 s)=64.25 rad/s\omega = 94.25\text{ rad/s} - (2.50\text{ rad/s}^2)(12.0\text{ s}) = 64.25\text{ rad/s}.

  2. Convert to frequency: f=ω2π=64.252π≈10.2 rev/sf = \frac{\omega}{2\pi} = \frac{64.25}{2\pi} \approx 10.2\text{ rev/s}.

  3. Compute the period: T=1f=110.225 s−1≈0.0978 sT = \frac{1}{f} = \frac{1}{10.225\text{ s}^{-1}} \approx 0.0978\text{ s}.

Final answer

(a) f=10.2 rev/sf = 10.2\text{ rev/s}; (b) T=0.0978 sT = 0.0978\text{ s}; (c) tstop=37.7 st_{\text{stop}} = 37.7\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review vector sign conventions for rotational kinematics when an opposing torque acts on a body.

  • Practice checking whether your calculated speed or frequency decreases as time increases under braking conditions.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies the period as the reciprocal of angular velocity (T = 1/ω) instead of the reciprocal of frequency (T = 1/f).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω0=2π(15.0)=94.25 rad/s  ⟹  ω=94.25−2.50(12.0)=64.25 rad/s\omega_0 = 2\pi(15.0) = 94.25\text{ rad/s} \implies \omega = 94.25 - 2.50(12.0) = 64.25\text{ rad/s}

  2. Step 2

    f=64.252π=10.2 rev/sf = \frac{64.25}{2\pi} = 10.2\text{ rev/s}

  3. Step 3

    T=1ω=164.25=0.0156 sT = \frac{1}{\omega} = \frac{1}{64.25} = 0.0156\text{ s}

    Correct

    T=1f=2πω=110.225 rev/s≈0.0978 sT = \frac{1}{f} = \frac{2\pi}{\omega} = \frac{1}{10.225\text{ rev/s}} \approx 0.0978\text{ s}

    You used the reciprocal of angular velocity ω\omega (measured in rad/s\text{rad/s}) instead of the reciprocal of frequency ff (measured in rev/s\text{rev/s}). Because one full rotation equals 2π radians2\pi\text{ radians}, the period is T=1f=2πωT = \frac{1}{f} = \frac{2\pi}{\omega}.

  4. Step 4

    0=94.25−2.50tstop  ⟹  tstop=94.252.50=37.7 s0 = 94.25 - 2.50 t_{\text{stop}} \implies t_{\text{stop}} = \frac{94.25}{2.50} = 37.7\text{ s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the initial frequency into angular velocity using ω0=2πf0\omega_0 = 2\pi f_0.

You applied constant angular acceleration kinematics accurately to find both ω(t)\omega(t) and the stopping time tstopt_{\text{stop}}.

You correctly converted the angular speed at t=12.0 st = 12.0\text{ s} back to frequency in rev/s\text{rev/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion between angular velocity and frequency

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You equated rotational period with the reciprocal of angular velocity (T=1ωT = \frac{1}{\omega}) rather than the reciprocal of rotational frequency (T=1fT = \frac{1}{f}), missing the factor of 2π rad/rev2\pi\text{ rad/rev} required for a complete revolution.

REASONING PATH
Your ACEpath teacher’s suggested approach
Connecting Period, Frequency, and Angular Velocity
  • Period TT is the time for one full revolution (2π rad2\pi\text{ rad}). Therefore, T=1f=2πωT = \frac{1}{f} = \frac{2\pi}{\omega}.

  • Always verify your units: 1ω\frac{1}{\omega} gives units of s/rad\text{s/rad}, not s/rev\text{s/rev} (seconds per cycle).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the relationship between rotational period and frequency: T=1fT = \frac{1}{f}.

  2. Substitute the unrounded frequency f≈10.225 rev/sf \approx 10.225\text{ rev/s}: T=110.225 s−1≈0.0978 sT = \frac{1}{10.225\text{ s}^{-1}} \approx 0.0978\text{ s}.

Final answer

(a) f=10.2 rev/sf = 10.2\text{ rev/s}; (b) T=0.0978 sT = 0.0978\text{ s}; (c) tstop=37.7 st_{\text{stop}} = 37.7\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the key triad: ω=2πf=2πT\omega = 2\pi f = \frac{2\pi}{T}, which leads directly to T=1f=2πωT = \frac{1}{f} = \frac{2\pi}{\omega}.

  • Perform unit checks whenever calculating period: confirm that your denominator is in cycles/revolutions per unit time, not radians per unit time.

Lock it in

Similar question

01

A centrifuge decelerates uniformly from an initial frequency of f0=20.0 rev/sf_0 = 20.0\text{ rev/s} to rest in 10.0 s10.0\text{ s}. Determine: (a) its angular acceleration α\alpha in rad/s2\text{rad/s}^2, and (b) its period of rotation TT at t=5.0 st = 5.0\text{ s}.

Answer

(a) ω0=2π(20.0)=40π rad/s\omega_0 = 2\pi(20.0) = 40\pi\text{ rad/s}. Using ω=ω0+αt\omega = \omega_0 + \alpha t with ω=0\omega = 0 at t=10.0 st = 10.0\text{ s}, α=−40π10.0=−4π rad/s2≈−12.6 rad/s2\alpha = -\frac{40\pi}{10.0} = -4\pi\text{ rad/s}^2 \approx -12.6\text{ rad/s}^2. (b) At t=5.0 st = 5.0\text{ s}, f=10.0 rev/sf = 10.0\text{ rev/s}, so T=1f=0.100 sT = \frac{1}{f} = 0.100\text{ s}.

02

A circular saw blade spinning at 3600 rpm3600\text{ rpm} is turned off and comes to a stop with a constant angular deceleration of magnitude 12.0 rad/s212.0\text{ rad/s}^2. Calculate: (a) the initial angular velocity ω0\omega_0 in rad/s\text{rad/s}, and (b) the total time required for the blade to come to a complete stop.

Answer

(a) f0=3600 rev60 s=60.0 rev/s  ⟹  ω0=2π(60.0)=120π rad/s≈377 rad/sf_0 = \frac{3600\text{ rev}}{60\text{ s}} = 60.0\text{ rev/s} \implies \omega_0 = 2\pi(60.0) = 120\pi\text{ rad/s} \approx 377\text{ rad/s}. (b) Using 0=ω0−αtstop0 = \omega_0 - \alpha t_{\text{stop}}, tstop=120π12.0=10π s≈31.4 st_{\text{stop}} = \frac{120\pi}{12.0} = 10\pi\text{ s} \approx 31.4\text{ s}.

03

A grinding wheel with initial frequency f0=12.0 rev/sf_0 = 12.0\text{ rev/s} experiences an opposing angular acceleration of α=1.80 rad/s2\alpha = 1.80\text{ rad/s}^2. Determine the number of revolutions NN completed by the wheel between t=0t = 0 and the instant it comes to a complete stop.

Answer

ω0=2π(12.0)=24π rad/s\omega_0 = 2\pi(12.0) = 24\pi\text{ rad/s}. Using ω2=ω02+2αΔθ\omega^2 = \omega_0^2 + 2\alpha\Delta\theta with ω=0\omega = 0: Δθ=ω022∣α∣=(24π)22(1.80)=576π23.6=160π2 rad≈1579 rad\Delta\theta = \frac{\omega_0^2}{2|\alpha|} = \frac{(24\pi)^2}{2(1.80)} = \frac{576\pi^2}{3.6} = 160\pi^2\text{ rad} \approx 1579\text{ rad}. The total revolutions are N=Δθ2π=80π≈251 revN = \frac{\Delta\theta}{2\pi} = 80\pi \approx 251\text{ rev}.

Loading workspace…