Resources

A mining cart of mass m=680 kgm = 680\text{ kg} is descending down a straight track inclined at θ=22.0∘\theta = 22.0^\circ below the horizontal. An emergency regenerative braking cable connected to the cart maintains a constant downward speed of v=4.50 m/sv = 4.50\text{ m/s}. A constant kinetic friction force of magnitude fk=420 Nf_k = 420\text{ N} acts up the incline against the cart's motion. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, choose a coordinate axis pointing along the direction of motion and calculate the net rate of mechanical work done by the braking cable on the cart (i.e., the instantaneous power PcableP_{\text{cable}} supplied by the cable, paying strict attention to algebraic sign).

Answer and steps

Final answer

Pcable=−9.35×103 WP_{\text{cable}} = -9.35\times 10^3\text{ W} (or −9.35 kW-9.35\text{ kW})

Steps

01

Set Up the Coordinate System and Identify Forces

Choose the +x+x-axis directed down the incline, parallel to the cart's velocity vector v⃗\vec{v}. In this coordinate system:

  • Velocity: v⃗=+4.50 i^ m/s\vec{v} = +4.50\,\hat{i}\text{ m/s}
  • The component of gravitational force acting down the incline: Fg,x=mgsin⁡θF_{g,x} = mg \sin\theta
  • The kinetic friction force acting up the incline (opposing motion): fk,x=−fk=−420 Nf_{k,x} = -f_k = -420\text{ N}
  • The tension force F⃗cable\vec{F}_{\text{cable}} exerted by the braking cable on the cart acts up the incline to slow it down: Fcable,x=−TcableF_{\text{cable},x} = -T_{\text{cable}}

02

Apply Newton's First Law Along the Incline

Because the cart descends at a constant speed (v=4.50 m/sv = 4.50\text{ m/s}), its acceleration is zero (ax=0a_x = 0). The net force along the incline must balance:

∑Fx=mgsin⁡θ−fk−Tcable=0\sum F_x = mg \sin\theta - f_k - T_{\text{cable}} = 0

Solving for the magnitude of the cable tension TcableT_{\text{cable}}:

Tcable=mgsin⁡θ−fkT_{\text{cable}} = mg \sin\theta - f_k

Substitute the given values:

  • m=680 kgm = 680\text{ kg}
  • g=9.80 m/s2g = 9.80\text{ m/s}^2
  • θ=22.0∘\theta = 22.0^\circ
  • fk=420 Nf_k = 420\text{ N}

mgsin⁡(22.0∘)=(680 kg)(9.80 m/s2)sin⁡(22.0∘)≈6664⋅0.3746≈2496.4 Nmg \sin(22.0^\circ) = (680\text{ kg})(9.80\text{ m/s}^2)\sin(22.0^\circ) \approx 6664 \cdot 0.3746 \approx 2496.4\text{ N}

Tcable=2496.4 N−420 N≈2076.4 NT_{\text{cable}} = 2496.4\text{ N} - 420\text{ N} \approx 2076.4\text{ N}


03

Calculate the Power Supplied by the Cable

Instantaneous mechanical power is defined by the dot product of the applied force and velocity:

Pcable=F⃗cable⋅v⃗P_{\text{cable}} = \vec{F}_{\text{cable}} \cdot \vec{v}

Because the force exerted by the cable points up the incline (−x-x direction) while the cart moves down the incline (+x+x direction), the angle between F⃗cable\vec{F}_{\text{cable}} and v⃗\vec{v} is 180∘180^\circ:

Pcable=−Tcable⋅vP_{\text{cable}} = -T_{\text{cable}} \cdot v

Pcable=−(2076.4 N)(4.50 m/s)≈−9.344×103 W≈−9.35×103 W(or −9.35 kW)P_{\text{cable}} = -(2076.4\text{ N})(4.50\text{ m/s}) \approx -9.344 \times 10^3\text{ W} \approx -9.35 \times 10^3\text{ W} \quad (\text{or } -9.35\text{ kW})

Pitfall Note on Sign: The negative sign is physically crucial. It indicates that the cable is doing negative mechanical work on the cart—extracting energy from the cart's descending motion (regenerative braking) rather than supplying energy to it.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that the cable force opposes the direction of motion, omitting the negative sign for the power delivered by the cable.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΣF=mgsin⁡(θ)−fk−T=0  ⟹  T=680×9.80×sin⁡(22.0∘)−420  ⟹  T=2496.1−420=2076.1 N\Sigma F = mg\sin(\theta) - f_k - T = 0 \implies T = 680 \times 9.80 \times \sin(22.0^\circ) - 420 \implies T = 2496.1 - 420 = 2076.1\text{ N}

  2. Step 2

    P=Tv=2076.1×4.50=9340 WP = Tv = 2076.1 \times 4.50 = 9340\text{ W}

    Correct

    Pcable=F⃗cable⋅v⃗=−Tv=−(2076.4 N)(4.50 m/s)≈−9.35×103 WP_{\text{cable}} = \vec{F}_{\text{cable}} \cdot \vec{v} = -T v = -(2076.4\text{ N})(4.50\text{ m/s}) \approx -9.35\times 10^3\text{ W}

    You calculated power as a simple product of magnitudes (P=TvP = Tv) rather than using the vector dot product P=F⃗⋅v⃗=Fvcos⁡θP = \vec{F} \cdot \vec{v} = F v \cos\theta. Since the cable pulls uphill while the cart moves downhill (θ=180∘\theta = 180^\circ), the power must be negative.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that constant downward speed implies zero acceleration along the track.

You correctly resolved the component of gravity acting down the incline and subtracted kinetic friction to find the cable tension.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in mechanical power

You calculated P=TvP = Tv using the magnitudes instead of accounting for the 180∘180^\circ angle between the cable tension and the velocity vector.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated instantaneous power as a scalar product of magnitudes rather than a vector dot product F⃗⋅v⃗\vec{F} \cdot \vec{v}, overlooking that forces opposing motion do negative work and remove energy from the system.

REASONING PATH
Your ACEpath teacher’s suggested approach
Vector Definition of Power
  • Instantaneous power is defined as P=F⃗⋅v⃗=Fvcos⁡ϕP = \vec{F} \cdot \vec{v} = F v \cos\phi, where ϕ\phi is the angle between the force and velocity vectors.

  • Always draw or identify the relative directions of F⃗\vec{F} and v⃗\vec{v} before calculating power. If they point in opposite directions (ϕ=180∘\phi = 180^\circ), include a negative sign.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the angle ϕ\phi between the cable force vector F⃗cable\vec{F}_{\text{cable}} (acting up the incline) and the velocity vector v⃗\vec{v} (acting down the incline): ϕ=180∘\phi = 180^\circ.

  2. Apply the dot product definition of power: Pcable=F⃗cable⋅v⃗=Tvcos⁡(180∘)=−TvP_{\text{cable}} = \vec{F}_{\text{cable}} \cdot \vec{v} = T v \cos(180^\circ) = -T v.

  3. Substitute the tension T=2076.4 NT = 2076.4\text{ N} and speed v=4.50 m/sv = 4.50\text{ m/s}: Pcable=−(2076.4 N)(4.50 m/s)≈−9.35×103 WP_{\text{cable}} = -(2076.4\text{ N})(4.50\text{ m/s}) \approx -9.35\times 10^3\text{ W}.

Final answer

Pcable=−9.35×103 W (or −9.35 kW)P_{\text{cable}} = -9.35\times 10^3\text{ W}\text{ (or } -9.35\text{ kW)}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the vector dot product definition of mechanical power: P=F⃗⋅v⃗P = \vec{F} \cdot \vec{v}.

  • Practice identifying whether applied forces add mechanical energy to an object (P>0P > 0) or remove mechanical energy (P<0P < 0).

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly uses cosine instead of sine to resolve the component of gravity acting parallel to the incline.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΣF=mgcos⁡(θ)−fk−T=0  ⟹  T=680×9.80×cos⁡(22.0∘)−420  ⟹  T=6178.6−420=5758.6 N\Sigma F = mg \cos(\theta) - f_k - T = 0 \implies T = 680 \times 9.80 \times \cos(22.0^\circ) - 420 \implies T = 6178.6 - 420 = 5758.6\text{ N}

    Correct

    ΣFx=mgsin⁡θ−fk−T=0  ⟹  T=(680)(9.80)sin⁡(22.0∘)−420≈2076.4 N\Sigma F_x = mg \sin\theta - f_k - T = 0 \implies T = (680)(9.80)\sin(22.0^\circ) - 420 \approx 2076.4\text{ N}

    Because the incline angle θ=22.0∘\theta = 22.0^\circ is measured with respect to the horizontal, the component of gravity directed down the ramp is opposite to the angle in the right triangle, which gives Fg,∥=mgsin⁡θF_{g,\parallel} = mg\sin\theta, not mgcos⁡θmg\cos\theta.

  2. Step 2

    P=−Tv=−5758.6×4.50=−25910 WP = -T v = -5758.6 \times 4.50 = -25910\text{ W}

    Correct

    P=−Tv=−(2076.4 N)(4.50 m/s)≈−9.35×103 WP = -T v = -(2076.4\text{ N})(4.50\text{ m/s}) \approx -9.35 \times 10^3\text{ W}

    Your relationship P=−TvP = -Tv correctly reflects that the cable force opposes the direction of motion, but substituting the incorrect tension value from Step 1 carried the error into your final result.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that constant downward velocity means the net force along the incline is zero.

You correctly identified all three forces acting along the incline: gravity, friction, and cable tension.

You correctly determined that the braking cable produces negative power because its tension acts opposite to the velocity vector.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Error

You resolved the downhill gravitational force using cosine instead of sine.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the parallel and perpendicular components of weight on an inclined plane when the angle θ\theta is given relative to the horizontal.

REASONING PATH
Your ACEpath teacher’s suggested approach
Resolving Weight Along an Incline
  • For an incline at angle θ\theta to the horizontal, the component of weight parallel to the incline is Fg,∥=mgsin⁡θF_{g,\parallel} = mg\sin\theta, while the perpendicular component is Fg,⊥=mgcos⁡θF_{g,\perp} = mg\cos\theta.

  • Check the right triangle formed by the vertical weight vector: the parallel component is opposite the incline angle θ\theta.

Limiting Case Check
  • As θ→0∘\theta \to 0^\circ (flat ground), the downhill pull of gravity must vanish (mgsin⁡0∘=0mg\sin 0^\circ = 0).

  • Substitute θ=0∘\theta = 0^\circ mentally into your downhill expression; if it gives mgmg, you accidentally used cosine.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up equilibrium down the incline with the correct gravity component: mgsin⁡θ−fk−T=0mg \sin\theta - f_k - T = 0.

  2. Solve for the cable tension: T=(680 kg)(9.80 m/s2)sin⁡(22.0∘)−420 N≈2496.4 N−420 N=2076.4 NT = (680\text{ kg})(9.80\text{ m/s}^2)\sin(22.0^\circ) - 420\text{ N} \approx 2496.4\text{ N} - 420\text{ N} = 2076.4\text{ N}.

  3. Calculate instantaneous power: P=F⃗cable⋅v⃗=−Tv=−(2076.4 N)(4.50 m/s)≈−9.35×103 WP = \vec{F}_{\text{cable}} \cdot \vec{v} = -Tv = -(2076.4\text{ N})(4.50\text{ m/s}) \approx -9.35\times 10^3\text{ W}.

Final answer

Pcable=−9.35×103 WP_{\text{cable}} = -9.35\times 10^3\text{ W} (or −9.35 kW-9.35\text{ kW})

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch the right triangle of the weight vector with its legs parallel and perpendicular to the ramp before writing force equations.

  • Use the extreme-angle sanity check: if the incline were horizontal (θ=0∘\theta = 0^\circ), the parallel force should be zero, which confirms sin⁡θ\sin\theta.

OverviewACEpath Teacher's Diagnosis

03 The student treats friction as acting down the incline alongside gravity rather than opposing the motion, adding friction instead of subtracting it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ∑F=mgsin⁡(θ)+fk−T=0  ⟹  T=680×9.80×sin⁡(22.0∘)+420=2916.1 N\sum F = mg\sin(\theta) + f_k - T = 0 \implies T = 680 \times 9.80 \times \sin(22.0^\circ) + 420 = 2916.1\text{ N}

    Correct

    ∑Fx=mgsin⁡θ−fk−T=0  ⟹  T=mgsin⁡θ−fk=2496.4 N−420 N=2076.4 N\sum F_x = mg\sin\theta - f_k - T = 0 \implies T = mg\sin\theta - f_k = 2496.4\text{ N} - 420\text{ N} = 2076.4\text{ N}

    Kinetic friction always opposes the relative motion between surfaces. Since the cart is descending down the incline, the kinetic friction force points up the incline (in the same direction as the cable tension, opposing gravity), so it must be subtracted rather than added.

  2. Step 2

    P=−Tv=−2916.1×4.50=−13120 WP = -Tv = -2916.1 \times 4.50 = -13120\text{ W}

    Correct

    Pcable=−Tv=−(2076.4 N)(4.50 m/s)≈−9.35×103 WP_{\text{cable}} = -Tv = -(2076.4\text{ N})(4.50\text{ m/s}) \approx -9.35 \times 10^3\text{ W}

    Your formula for power and your negative sign are physically correct, but the numerical result is affected by the incorrect tension value from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied Newton's first law for a body moving at constant velocity.

You correctly identified that gravity has a component mgsin⁡θmg\sin\theta directed down the incline.

You correctly recognized that the braking cable opposes the velocity vector, giving negative power.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Friction Force

No

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misidentifying the direction of kinetic friction along the incline, adding it alongside the gravitational component instead of treating it as opposing the downward descent.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Kinetic Friction
  • Kinetic friction always opposes the direction of instantaneous velocity: f⃗k=−fk v^\vec{f}_k = -f_k\,\hat{v}.

  • Draw a free-body diagram showing velocity first; point friction directly opposite to the velocity vector along the track surface.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ∑Fx=mgsin⁡θ−fk−T=0\sum F_x = mg\sin\theta - f_k - T = 0

  2. Solve for cable tension: T=mgsin⁡θ−fk=(680)(9.80)sin⁡(22.0∘)−420≈2496.4−420=2076.4 NT = mg\sin\theta - f_k = (680)(9.80)\sin(22.0^\circ) - 420 \approx 2496.4 - 420 = 2076.4\text{ N}

  3. Calculate cable power: Pcable=F⃗cable⋅v⃗=−Tv=−(2076.4 N)(4.50 m/s)≈−9344 WP_{\text{cable}} = \vec{F}_{\text{cable}} \cdot \vec{v} = -T v = -(2076.4\text{ N})(4.50\text{ m/s}) \approx -9344\text{ W}

Final answer

Pcable=−9.35×103 W (or −9.35 kW)P_{\text{cable}} = -9.35 \times 10^3\text{ W}\text{ (or } -9.35\text{ kW)}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch a free-body diagram showing the velocity vector v⃗\vec{v} before writing Newton's second law, ensuring f⃗k\vec{f}_k points opposite to v⃗\vec{v}.

  • Double-check whether opposing forces help the cable hold the cart back: friction helps support the cart, so the cable needs to exert less force than mgsin⁡θmg\sin\theta, not more.

Lock it in

Similar question

01

A parachute exerts a constant upward drag force of 750 N750\text{ N} on a skydiver falling vertically at a terminal speed of 12.0 m/s12.0\text{ m/s}. Calculate the power delivered by the drag force on the skydiver.

Answer

P=F⃗drag⋅v⃗=(750 N)(12.0 m/s)cos⁡(180∘)=−9.00×103 WP = \vec{F}_{\text{drag}} \cdot \vec{v} = (750\text{ N})(12.0\text{ m/s})\cos(180^\circ) = -9.00\times 10^3\text{ W} (or −9.00 kW-9.00\text{ kW}).

02

An electric winch lowers an engine block of mass m=220 kgm = 220\text{ kg} vertically downward with a constant speed of v=0.80 m/sv = 0.80\text{ m/s}. Assuming g=9.80 m/s2g = 9.80\text{ m/s}^2 and negligible air resistance, find the instantaneous power delivered by the winch cable to the engine block.

Answer

Since vv is constant, cable tension balances gravity: T=mg=(220 kg)(9.80 m/s2)=2156 NT = mg = (220\text{ kg})(9.80\text{ m/s}^2) = 2156\text{ N}. The tension acts upward and velocity downward (ϕ=180∘\phi = 180^\circ), so P=−Tv=−(2156 N)(0.80 m/s)=−1.72×103 WP = -T v = -(2156\text{ N})(0.80\text{ m/s}) = -1.72\times 10^3\text{ W} (or −1.7 kW-1.7\text{ kW}).

03

A sled of mass 45 kg45\text{ kg} slides down a 30.0∘30.0^\circ snow slope at a constant speed of 5.0 m/s5.0\text{ m/s}. A child pulls backward on a rope parallel to the incline to prevent the sled from accelerating. If the coefficient of kinetic friction is μk=0.15\mu_k = 0.15 and g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the instantaneous power supplied by the rope on the sled.

Answer

Normal force: N=mgcos⁡(30.0∘)=381.9 NN = mg\cos(30.0^\circ) = 381.9\text{ N}. Friction: fk=μkN=57.3 Nf_k = \mu_k N = 57.3\text{ N}. Downhill gravity: mgsin⁡(30.0∘)=220.5 Nmg\sin(30.0^\circ) = 220.5\text{ N}. Balancing forces along the incline gives rope tension T=mgsin⁡(30.0∘)−fk=163.2 NT = mg\sin(30.0^\circ) - f_k = 163.2\text{ N} pulling uphill. Since rope force opposes downhill motion (ϕ=180∘\phi = 180^\circ), P=−Tv=−(163.2 N)(5.0 m/s)≈−8.2×102 WP = -T v = -(163.2\text{ N})(5.0\text{ m/s}) \approx -8.2\times 10^2\text{ W}.

Loading workspace…