Resources
In a physics laboratory verification of Newton's second law using an Atwood-style modified dynamics cart system, a cart of mass on a low-friction horizontal track is connected via a lightweight string over an ideal pulley to a hanging mass . High-precision motion sensors record that the system accelerates from rest at . Taking : (a) Calculate the theoretical net external driving force of the ideal frictionless system. (b) Determine the actual net horizontal force acting on the cart during the run. (c) Using the combined system dynamic equations, determine the unaccounted resistive friction force present on the cart track.
Answer and steps
Final answer
(a) ; (b) ; (c)
Steps
Part (a): Theoretical Net External Driving Force of the Ideal System
In a modified Atwood machine with a frictionless horizontal track and an ideal string and pulley:
- The vertical forces on the cart (gravity downward and normal force upward) balance each other:
- The internal tension forces between the cart and the hanging mass cancel out when considering the cart and hanging mass as a single composite system.
- Therefore, the only unbalanced external force acting in the direction of motion is the weight of the hanging mass:
Substitute the given numerical values:
Part (b): Actual Net Horizontal Force on the Cart
By Newton's second law, the net force acting on any single object is the product of its mass and its actual acceleration:
Using the measured experimental acceleration :
Common Pitfall: Do not confuse the net force on the cart () with the tension in the string (). The net horizontal force is the vector sum of tension pulling forward and friction resisting motion ().
Part (c): Resistive Friction Force on the Track
Consider the entire system of mass :
The actual net force accelerating the combined system along its trajectory is:
In the presence of track friction , the equation of motion for the entire system along the line of motion is:
Rearranging to solve for the friction force :
Typical errors
01 The student includes the total mass of the cart and hanging mass when calculating the driving gravitational force instead of using only the hanging mass.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
F_{} = (M + m) * g F_{} = (0.850 + 0.150) * 9.80 = 9.80
CorrectF_{} = m g = 0.150 9.80^2 = 1.47_
The cart rests on a horizontal track, so its weight is balanced by the upward normal force . The only unbalanced external driving force acting along the line of motion is the weight of the hanging mass, .
- Step 2
F_{} = M * a_{} F_{} = 0.850 * 1.28 = 1.088_
- Step 3
F_{} - f_{} = (M + m) * a_{} 9.80 - f_{} = 1.000 * 1.28 f_{} = 9.80 - 1.28 = 8.52_
Correctf_{} = m g - (M + m) a_{} = 1.47 - 1.28 = 0.190
Your dynamic equation is conceptually correct, but substituting your incorrect value of from part (a) carried over into an incorrect final friction value.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the net force on an individual object equals its own mass multiplied by its acceleration.
You accurately formulated the system equation of motion relating driving force, resistive friction, and total inertia.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used the total system mass instead of only the hanging mass when calculating the driving gravitational force.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn a modified Atwood machine, gravity acts on both masses, but the cart's weight is perpendicular to the track and fully supported by the normal force. Therefore, only the unsupported hanging mass provides the external driving force along the direction of motion.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Unbalanced External Forces
Only gravitational forces acting parallel to the motion (or hanging freely) contribute to the net driving force.
Always draw a free-body diagram for each object and check whether gravity is balanced by a normal force before including it in the driving force.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the ideal driving force: .
Substitute into your system equation: .
Solve for track friction: .
(a) ; (b) ; (c)
02 The student assumes the net driving force of the combined system accelerates only the cart mass M rather than the total system mass (M + m).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You set the net force of the combined system equal to instead of . Because the string connects both objects, the hanging mass accelerates downward at the same rate, so its inertia must be included in the total accelerating mass.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the weight of the hanging mass is the external driving force of the system.
You correctly applied Newton's second law to find the net force acting on the cart alone using its measured acceleration.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhen setting up Newton's second law for a multi-body connected system, you applied the net external driving forces () to only the cart's mass rather than the total inertia of the coupled system . Alternatively, if analyzing the cart alone, the pulling force is the string tension , which is strictly less than because the hanging mass is accelerating downward ().
REASONING PATH
Your ACEpath teacher’s suggested approach- System Boundary Rule
For coupled objects moving with identical acceleration magnitude , .
Always list every moving mass inside the system boundary before writing the right-hand side of .
- Tension vs. Weight Distinction
A hanging mass accelerating downward has , which means .
Never substitute the hanging weight directly as the forward tension force on the cart when the system is accelerating.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite Newton's second law for the entire connected system: .
Identify the external forces along the direction of motion: the driving gravity force pulling forward and the track friction resisting motion, giving .
Substitute the known values: .
Solve for the friction force: .
(a) ; (b) ; (c)
03 The student confuses the actual net force on the cart with the tension in the string and directly equates the net force on the cart to the hanging mass weight minus friction.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
When applying Newton's second law to an individual object, you must multiply that specific object's mass by its acceleration. By using , you calculated the actual net force on the entire two-body system rather than the net horizontal force on the cart alone.
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the hanging mass's weight is the external driving force for the ideal modified Atwood system.
You properly formulated the combined two-body equation of motion to calculate track friction in part (c).
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the total system mass into the formula for the net force acting on the single cart .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated the net force accelerating an isolated component of a system with the net force accelerating the combined multi-body system.
REASONING PATH
Your ACEpath teacher’s suggested approach- Define the System Boundary
For any isolated body , Newton's second law states .
Always check whether the question asks for the net force on an individual object () or the net force on the entire system ().
CORRECTED PATH
ACEpath Teacher's DemonstrationApply Newton's second law directly to the cart of mass : .
Substitute the cart's mass and acceleration : .
Round to three significant figures to obtain .
(a) ; (b) ; (c)
Lock it in
In a horizontal cart-and-hanging-mass system (modified Atwood machine), which mass provides the external driving force?
Only the hanging mass provides the driving force (). The cart's weight is balanced by the track's normal force.
Similar question
A cart with mass on a frictionless horizontal table is connected by a light string over a frictionless pulley to a hanging mass . Taking , find: (a) the net driving force on the system, and (b) the theoretical acceleration of the system.
Answer
(a) . (b) .
In the same system (, ), sensors measure an actual acceleration of . What constant resistive friction force opposes the cart on the track?
Answer
System equation: , so .
A student sets up a modified Atwood machine where a cart of mass accelerates along a track inclined at an angle above the horizontal, connected to a hanging mass . In terms of , , , and , what is the net theoretical driving force pulling the cart up the incline (assuming frictionless surfaces and that descends)?
Answer
The hanging mass pulls with force , while gravity pulls the cart down the incline with component . Thus, .