Resources

A stunt driver accelerates a car of mass m=1.40×103 kgm = 1.40\times 10^3\text{ kg} from rest toward a collapsible water-barrel barrier of maximum deformation distance dmax⁡=1.20 md_{\max} = 1.20\text{ m}. Structural safety standards dictate that the driver's body can withstand a maximum average retarding force of Fˉmax⁡=5.25×104 N\bar{F}_{\max} = 5.25\times 10^4\text{ N} without fatal injury during the collision. Assuming the barrier delivers a uniformly decelerating force over its entire collapse distance, determine: (a) the critical threshold impact speed vcritv_{\text{crit}} above which the allowable force limit is exceeded, and (b) the corresponding duration Δt\Delta t of the impulse during this critical impact.

Answer and steps

Final answer

(a) vcrit=9.49 m/sv_{\text{crit}} = 9.49\text{ m/s}; (b) Δt=0.253 s\Delta t = 0.253\text{ s}

Steps

Part (a): Determine the Critical Impact Speed vcritv_{\text{crit}}

When the car impacts the barrier, the retarding force does work on the vehicle to bring it to rest from an initial speed vcritv_{\text{crit}} over the maximum stopping distance dmax⁡d_{\max}.

By the Work-Energy Theorem, the net work done on the car equals its change in kinetic energy:

Wnet=ΔKW_{\text{net}} = \Delta K

Since the barrier exerts a constant resisting force Fˉmax⁡\bar{F}_{\max} opposing the motion, the work done by the barrier is:

W=−Fˉmax⁡dmax⁡W = -\bar{F}_{\max} d_{\max}

The change in kinetic energy as the car comes to a complete stop (vf=0v_f = 0) is:

ΔK=0−12mvcrit2\Delta K = 0 - \frac{1}{2}m v_{\text{crit}}^2

Equating work and the change in kinetic energy:

Fˉmax⁡dmax⁡=12mvcrit2\bar{F}_{\max} d_{\max} = \frac{1}{2}m v_{\text{crit}}^2

Solving for vcritv_{\text{crit}}:

vcrit=2Fˉmax⁡dmax⁡mv_{\text{crit}} = \sqrt{\frac{2 \bar{F}_{\max} d_{\max}}{m}}

Substitute the given values into the expression:

vcrit=2(5.25×104 N)(1.20 m)1.40×103 kg=1.26×1051.40×103=90 m/s≈9.49 m/sv_{\text{crit}} = \sqrt{\frac{2(5.25\times 10^4\text{ N})(1.20\text{ m})}{1.40\times 10^3\text{ kg}}} = \sqrt{\frac{1.26\times 10^5}{1.40\times 10^3}} = \sqrt{90}\text{ m/s} \approx 9.49\text{ m/s}


Part (b): Determine the Duration Δt\Delta t of the Impulse

By the Impulse-Momentum Theorem, the magnitude of the impulse delivered by the barrier equals the car's change in linear momentum:

J=Fˉmax⁡Δt=Δp=mvcritJ = \bar{F}_{\max} \Delta t = \Delta p = m v_{\text{crit}}

Solving for the collision duration Δt\Delta t:

Δt=mvcritFˉmax⁡\Delta t = \frac{m v_{\text{crit}}}{\bar{F}_{\max}}

Substitute the known values:

Δt=(1.40×103 kg)(9.487 m/s)5.25×104 N≈0.253 s\Delta t = \frac{(1.40\times 10^3\text{ kg})(9.487\text{ m/s})}{5.25\times 10^4\text{ N}} \approx 0.253\text{ s}

(Alternative check using kinematics for constant deceleration: Δt=2dmax⁡vcrit=2(1.20 m)9.487 m/s≈0.253 s\Delta t = \frac{2 d_{\max}}{v_{\text{crit}}} = \frac{2(1.20\text{ m})}{9.487\text{ m/s}} \approx 0.253\text{ s}.)


Common Pitfall to Avoid

Be careful not to mix up the stopping distance dmax⁡d_{\max} with the time interval Δt\Delta t. Remember that W=F⋅dW = F \cdot d relates force and distance to kinetic energy, while impulse J=F⋅ΔtJ = F \cdot \Delta t relates force and time to momentum. Using the work-energy relation directly in part (a) avoids the need to find deceleration first.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student omits the factor of 1/2 in kinetic energy, equating F * d to m * v^2, which leads to an understated critical speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fmax⁡⋅dmax⁡=m⋅vcrit2  ⟹  vcrit=Fmax⁡⋅dmax⁡m  ⟹  vcrit=5.25×104×1.201.40×103  ⟹  vcrit=45.0=6.71 m/sF_{\max} \cdot d_{\max} = m \cdot v_{\text{crit}}^2 \implies v_{\text{crit}} = \sqrt{\frac{F_{\max} \cdot d_{\max}}{m}} \implies v_{\text{crit}} = \sqrt{\frac{5.25 \times 10^4 \times 1.20}{1.40 \times 10^3}} \implies v_{\text{crit}} = \sqrt{45.0} = 6.71\text{ m/s}

    Correct

    Fˉmax⁡dmax⁡=12mvcrit2  ⟹  vcrit=2Fˉmax⁡dmax⁡m=2(5.25×104 N)(1.20 m)1.40×103 kg=90 m/s≈9.49 m/s\bar{F}_{\max} d_{\max} = \frac{1}{2} m v_{\text{crit}}^2 \implies v_{\text{crit}} = \sqrt{\frac{2 \bar{F}_{\max} d_{\max}}{m}} = \sqrt{\frac{2(5.25 \times 10^4\text{ N})(1.20\text{ m})}{1.40 \times 10^3\text{ kg}}} = \sqrt{90}\text{ m/s} \approx 9.49\text{ m/s}

    You equated the work done by the retarding force to mv2m v^2 instead of kinetic energy, K=12mv2K = \frac{1}{2}m v^2. Missing the factor of 12\frac{1}{2} reduced the radicand by half, yielding 6.71 m/s6.71\text{ m/s} instead of 9.49 m/s9.49\text{ m/s}.

  2. Step 2

    Δt=m⋅vcritFmax⁡  ⟹  Δt=1.40×103×6.715.25×104  ⟹  Δt=0.179 s\Delta t = \frac{m \cdot v_{\text{crit}}}{F_{\max}} \implies \Delta t = \frac{1.40 \times 10^3 \times 6.71}{5.25 \times 10^4} \implies \Delta t = 0.179\text{ s}

    Correct

    Δt=mvcritFˉmax⁡=(1.40×103 kg)(9.487 m/s)5.25×104 N≈0.253 s\Delta t = \frac{m v_{\text{crit}}}{\bar{F}_{\max}} = \frac{(1.40 \times 10^3\text{ kg})(9.487\text{ m/s})}{5.25 \times 10^4\text{ N}} \approx 0.253\text{ s}

    Your reasoning using the impulse-momentum theorem Fˉmax⁡Δt=mvcrit\bar{F}_{\max} \Delta t = m v_{\text{crit}} is entirely correct. However, substituting your understated velocity from part (a) led to an inaccurate duration.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that the work done over the stopping distance brings the vehicle to rest.

You correctly used the impulse-momentum theorem to relate average force, collision time, and initial momentum.

You performed all arithmetic and square root evaluations accurately based on your setup.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Factor of 1/2 in Kinetic Energy

You forgot the factor of 12\frac{1}{2} when writing the kinetic energy term on the right-hand side of the work-energy balance.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing kinetic energy (K=12mv2K = \frac{1}{2} m v^2) with momentum-related or dimensional expressions lacking the coefficient 12\frac{1}{2}, leading to an understated kinetic energy threshold.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Energy Definition
  • The translational kinetic energy of an object of mass mm moving at speed vv is always K=12mv2K = \frac{1}{2} m v^2.

  • Whenever equating net work to change in motion (Wnet=ΔKW_{\text{net}} = \Delta K), write 12mv2\frac{1}{2} m v^2 explicitly before isolating any variable.

Impulse vs. Work Comparison
  • Work is force acting through distance (W=Fd=ΔKW = F d = \Delta K), while impulse is force acting through time (J=FΔt=ΔpJ = F \Delta t = \Delta p).

  • Check that the distance equation involves 12mv2\frac{1}{2} m v^2 and the time equation involves mvm v.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply both sides by 2 to isolate vcrit2v_{\text{crit}}^2: vcrit2=2Fˉmax⁡dmax⁡mv_{\text{crit}}^2 = \frac{2 \bar{F}_{\max} d_{\max}}{m}.

  2. Substitute the given numbers: vcrit=2(5.25×104)(1.20)1.40×103=90≈9.49 m/sv_{\text{crit}} = \sqrt{\frac{2(5.25 \times 10^4)(1.20)}{1.40 \times 10^3}} = \sqrt{90} \approx 9.49\text{ m/s}.

  3. Recalculate collision time using the corrected speed: Δt=mvcritFˉmax⁡=(1.40×103)(9.487)5.25×104≈0.253 s\Delta t = \frac{m v_{\text{crit}}}{\bar{F}_{\max}} = \frac{(1.40 \times 10^3)(9.487)}{5.25 \times 10^4} \approx 0.253\text{ s}.

Final answer

(a) vcrit=9.49 m/sv_{\text{crit}} = 9.49\text{ m/s}; (b) Δt=0.253 s\Delta t = 0.253\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full work-energy theorem statement Wnet=12mvf2−12mvi2W_{\text{net}} = \frac{1}{2}m v_f^2 - \frac{1}{2}m v_i^2 before plugging in any given numbers.

  • Verify your collision duration using the kinematic relation for constant deceleration: Δt=2dmax⁡vcrit\Delta t = \frac{2 d_{\max}}{v_{\text{crit}}} to cross-check your impulse calculation.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to take the square root when solving for velocity from kinetic energy, resulting in an unrealistically high impact speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (12\frac{1}{2}) m ⋅\cdot v_{crit\text{crit}}^2 = F_{\max} ⋅\cdot d_{\max}   ⟹  \implies v_{crit\text{crit}}^2 = 2⋅Fmax⁡⋅dmax⁡m\frac{2 \cdot F_{\max} \cdot d_{\max}}{m}   ⟹  \implies v_{crit\text{crit}}^2 = 2⋅5.25×104⋅1.201.40×103\frac{2 \cdot 5.25\times 10^4 \cdot 1.20}{1.40\times 10^3} = 90.0_

  2. Step 2

    v_{crit\text{crit}} = 90.0 m/s\text{ m/s}_

    Correct

    v_{crit\text{crit}} = 90.0 m2/s2\sqrt{90.0\text{ m}^2/\text{s}^2} ≈\approx 9.49 m/s\text{ m/s}_

    You dropped the exponent without taking the square root of the numerical value: vcrit=90.0≈9.49 m/sv_{\text{crit}} = \sqrt{90.0} \approx 9.49\text{ m/s} rather than 90.0 m/s90.0\text{ m/s}.

  3. Step 3

    Δ\Delta t = m⋅vcritFmax⁡\frac{m \cdot v_{\text{crit}}}{F_{\max}}   ⟹  \implies Δ\Delta t = 1.40×103⋅90.05.25×104\frac{1.40\times 10^3 \cdot 90.0}{5.25\times 10^4}   ⟹  \implies Δ\Delta t = 2.40 s\text{ s}

    Correct

    Δ\Delta t = mvcritFˉmax⁡\frac{m v_{\text{crit}}}{\bar{F}_{\max}} = (1.40×103 kg)(9.49 m/s)5.25×104 N\frac{(1.40\times 10^3\text{ kg})(9.49\text{ m/s})}{5.25\times 10^4\text{ N}} ≈\approx 0.253 s\text{ s}

    Your impulse-momentum equation is conceptually correct, but substituting your un-square-rooted velocity led to an incorrect time duration.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and equated work to the change in kinetic energy.

You correctly isolated vcrit2v_{\text{crit}}^2 symbolically and computed its value without arithmetic slips.

You correctly applied the impulse-momentum relationship to solve for collision time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Square Root

You copied the value of v2v^2 directly as vv instead of evaluating v2\sqrt{v^2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In algebraic multi-step problems, isolating a squared variable often leads to an algebraic transcription slip where the exponent is erased without applying the radical operator to the right-hand side.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional & Order of Magnitude Check
  • An impact speed of 90 m/s90\text{ m/s} equals 324 km/h324\text{ km/h}, which is implausibly fast for a standard stunt car stopping within 1.2 m1.2\text{ m}.

  • Perform a reality check on intermediate values to catch missing radical signs before proceeding.

Explicit Radical Step
  • Write v=…v = \sqrt{\dots} explicitly before substituting numbers.

  • Always write the square root symbol over both the formula and the numerical value in a separate line.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the square root of both sides: vcrit=90.0 m2/s2≈9.487 m/sv_{\text{crit}} = \sqrt{90.0\text{ m}^2/\text{s}^2} \approx 9.487\text{ m/s}.

  2. Substitute the corrected speed into the impulse-momentum equation: Δt=(1.40×103 kg)(9.487 m/s)5.25×104 N≈0.253 s\Delta t = \frac{(1.40\times 10^3\text{ kg})(9.487\text{ m/s})}{5.25\times 10^4\text{ N}} \approx 0.253\text{ s}.

Final answer

(a) vcrit≈9.49 m/sv_{\text{crit}} \approx 9.49\text{ m/s}; (b) Δt≈0.253 s\Delta t \approx 0.253\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the radical step v=2Fdmv = \sqrt{\frac{2Fd}{m}} before calculating the numerical value.

  • Check that the stopping time is consistent using the kinematic identity Δt=2dv\Delta t = \frac{2d}{v} as a fast cross-check.

OverviewACEpath Teacher's Diagnosis

03 The student calculates collision duration using distance divided by initial velocity rather than average velocity during uniform deceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fmax⁡⋅dmax⁡=12mvcrit2  ⟹  vcrit=2⋅Fmax⁡⋅dmax⁡m=2⋅5.25×104⋅1.201.40×103  ⟹  vcrit=9.49 m/sF_{\max} \cdot d_{\max} = \frac{1}{2} m v_{\text{crit}}^2 \implies v_{\text{crit}} = \sqrt{\frac{2 \cdot F_{\max} \cdot d_{\max}}{m}} = \sqrt{\frac{2 \cdot 5.25\times 10^4 \cdot 1.20}{1.40\times 10^3}} \implies v_{\text{crit}} = 9.49\text{ m/s}

  2. Step 2

    Δt=dmax⁡vcrit\Delta t = \frac{d_{\max}}{v_{\text{crit}}}

    Correct

    Δt=dmax⁡vˉ=2dmax⁡vcrit\Delta t = \frac{d_{\max}}{\bar{v}} = \frac{2 d_{\max}}{v_{\text{crit}}} or Δt=mvcritFˉmax⁡\Delta t = \frac{m v_{\text{crit}}}{\bar{F}_{\max}}

    Because the vehicle undergoes uniform deceleration to rest, its average speed over the collapse distance is vˉ=vcrit+02=vcrit2\bar{v} = \frac{v_{\text{crit}} + 0}{2} = \frac{v_{\text{crit}}}{2}, not vcritv_{\text{crit}}. Alternatively, you can use the impulse-momentum theorem FˉΔt=mvcrit\bar{F} \Delta t = m v_{\text{crit}}.

  3. Step 3

    Δt=1.209.49=0.126 s\Delta t = \frac{1.20}{9.49} = 0.126\text{ s}

    Correct

    Δt=2(1.20 m)9.49 m/s≈0.253 s\Delta t = \frac{2(1.20\text{ m})}{9.49\text{ m/s}} \approx 0.253\text{ s}

    This numerical result is off by a factor of 2 due to the missing factor of 12\frac{1}{2} in the average velocity formula.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the barrier's stopping work to the car's kinetic energy.

You calculated the critical impact speed accurately with proper units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Constant velocity assumed during deceleration

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the constant-velocity formula Δt=dv\Delta t = \frac{d}{v} instead of accounting for the linear decrease in velocity from vcritv_{\text{crit}} to 00, which gives an average velocity of vˉ=vcrit2\bar{v} = \frac{v_{\text{crit}}}{2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Average Speed in Uniform Deceleration
  • When an object decelerates uniformly to rest, its average speed is vˉ=v0+02=v02\bar{v} = \frac{v_0 + 0}{2} = \frac{v_0}{2}.

  • Calculate stopping time from distance using Δt=dvˉ=2dv0\Delta t = \frac{d}{\bar{v}} = \frac{2d}{v_0}, or apply the impulse-momentum theorem FˉΔt=mv0\bar{F}\Delta t = m v_0 directly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the impulse-momentum theorem: Fˉmax⁡Δt=mvcrit\bar{F}_{\max} \Delta t = m v_{\text{crit}}.

  2. Solve for the duration: Δt=mvcritFˉmax⁡=(1.40×103 kg)(9.49 m/s)5.25×104 N\Delta t = \frac{m v_{\text{crit}}}{\bar{F}_{\max}} = \frac{(1.40\times 10^3\text{ kg})(9.49\text{ m/s})}{5.25\times 10^4\text{ N}}.

  3. Evaluate: Δt≈0.253 s\Delta t \approx 0.253\text{ s}.

Final answer

(a) vcrit=9.49 m/sv_{\text{crit}} = 9.49\text{ m/s}; (b) Δt=0.253 s\Delta t = 0.253\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that Δt=dv\Delta t = \frac{d}{v} only applies when speed is constant.

  • Whenever a stopping distance is given with constant deceleration, use vˉ=v02\bar{v} = \frac{v_0}{2} or relate force directly to time using impulse: FΔt=ΔpF\Delta t = \Delta p.

Lock it in

Similar question

01

A 1200 kg1200\text{ kg} car traveling at 15.0 m/s15.0\text{ m/s} is brought to rest over a distance of 25.0 m25.0\text{ m} by a constant braking force. Find the magnitude of this braking force.

Answer

F=5.40×103 NF = 5.40 \times 10^3\text{ N}. By the Work-Energy Theorem, F⋅d=12mv2  ⟹  F=mv22d=(1200)(15.0)22(25.0)=5400 NF \cdot d = \frac{1}{2}m v^2 \implies F = \frac{m v^2}{2d} = \frac{(1200)(15.0)^2}{2(25.0)} = 5400\text{ N}.

02

A crate of mass m=80.0 kgm = 80.0\text{ kg} sliding on a frictionless floor at v=6.00 m/sv = 6.00\text{ m/s} hits a horizontal spring buffer. The buffer compresses by xmax⁡=0.400 mx_{\max} = 0.400\text{ m} to stop the crate. Determine: (a) the effective spring constant kk, and (b) the average retarding force Fˉ\bar{F} over this distance.

Answer

(a) k=1.80×104 N/mk = 1.80 \times 10^4\text{ N/m}; (b) Fˉ=3.60×103 N\bar{F} = 3.60 \times 10^3\text{ N}. (a) 12kxmax⁡2=12mv2  ⟹  k=mv2xmax⁡2=80.0(36.0)0.160=18000 N/m\frac{1}{2}k x_{\max}^2 = \frac{1}{2}m v^2 \implies k = \frac{m v^2}{x_{\max}^2} = \frac{80.0(36.0)}{0.160} = 18000\text{ N/m}. (b) Fˉ⋅xmax⁡=12mv2  ⟹  Fˉ=80.0(36.0)2(0.400)=3600 N\bar{F} \cdot x_{\max} = \frac{1}{2}m v^2 \implies \bar{F} = \frac{80.0(36.0)}{2(0.400)} = 3600\text{ N} (or Fˉ=12kxmax⁡=3600 N\bar{F} = \frac{1}{2}k x_{\max} = 3600\text{ N}).

03

An aircraft of mass 8.00×103 kg8.00 \times 10^3\text{ kg} lands on a carrier deck at 60.0 m/s60.0\text{ m/s} and is caught by an arresting cable delivering an average tension of 2.40×105 N2.40 \times 10^5\text{ N}. Find: (a) the stopping distance dd, and (b) the time duration Δt\Delta t until the plane comes to a complete halt.

Answer

(a) d=60.0 md = 60.0\text{ m}; (b) Δt=2.00 s\Delta t = 2.00\text{ s}. (a) F⋅d=12mv2  ⟹  d=(8.00×103)(60.0)22(2.40×105)=60.0 mF \cdot d = \frac{1}{2}m v^2 \implies d = \frac{(8.00 \times 10^3)(60.0)^2}{2(2.40 \times 10^5)} = 60.0\text{ m}. (b) Using impulse: Δt=mvF=(8.00×103)(60.0)2.40×105=2.00 s\Delta t = \frac{m v}{F} = \frac{(8.00 \times 10^3)(60.0)}{2.40 \times 10^5} = 2.00\text{ s} (or via kinematics: Δt=2dv=2(60.0)60.0=2.00 s\Delta t = \frac{2d}{v} = \frac{2(60.0)}{60.0} = 2.00\text{ s}).

Loading workspace…