Resources

A cylindrical glass beaker of mass M=240 gM = 240\text{ g} and inner height H=16.0 cmH = 16.0\text{ cm} has a uniform circular cross-section and a flat, thin base. The beaker is initially completely filled to the brim with water of total mass mw=480 gm_w = 480\text{ g}. As water slowly evaporates, the center of mass of the combined beaker-and-water system initially drops, reaches a minimum height hminh_{\text{min}} above the base, and subsequently rises back up to the midpoint of the empty beaker when fully dry. Calculate the liquid water depth y∗y^* remaining in the beaker at the exact moment the center of mass of the system reaches its absolute minimum height hminh_{\text{min}}, and evaluate hminh_{\text{min}}.

Answer and steps

Final answer

y∗=6.63 cmy^* = 6.63\text{ cm}, with hmin=6.63 cmh_{\text{min}} = 6.63\text{ cm}

Steps

01

Identify the masses and centers of mass

  • Empty beaker: The beaker has mass M=240 gM = 240\text{ g} and inner height H=16.0 cmH = 16.0\text{ cm}. Its walls and cross-section are uniform, so its center of mass lies at its geometric midpoint: yb=H2y_b = \frac{H}{2}
  • Water inside the beaker: When filled to the brim, the combined system has a total mass of 480 g480\text{ g}, which means the full mass of the water alone is: mwater, full=480 g−240 g=240 g=Mm_{\text{water, full}} = 480\text{ g} - 240\text{ g} = 240\text{ g} = M

    When the remaining water depth is yy (where 0≤y≤H0 \le y \le H), the mass of the water is proportional to its height: m(y)=MyHm(y) = M \frac{y}{H} Since the liquid column is uniform, its center of mass is located at half its depth: yw=y2y_w = \frac{y}{2}


02

Formulate the center of mass of the combined system

The height of the center of mass h(y)h(y) of the beaker-water system measured from the base is: h(y)=Myb+m(y)ywM+m(y)=M(H2)+(MyH)(y2)M+MyHh(y) = \frac{M y_b + m(y) y_w}{M + m(y)} = \frac{M\left(\frac{H}{2}\right) + \left(M\frac{y}{H}\right)\left(\frac{y}{2}\right)}{M + M\frac{y}{H}}

Dividing the numerator and denominator by MM: h(y)=H2+y22H1+yH=H2+y22(H+y)h(y) = \frac{\frac{H}{2} + \frac{y^2}{2H}}{1 + \frac{y}{H}} = \frac{H^2 + y^2}{2(H + y)}


03

Determine the condition for minimum center of mass

To find the depth y∗y^* that minimizes h(y)h(y), we can use a key physical principle:

Key Insight: When the system's center of mass reaches its minimum height, the center of mass must coincide with the free surface of the liquid: hmin=y∗h_{\text{min}} = y^* Reasoning: Adding an infinitesimal layer of water at the water surface (height yy) will lower the center of mass if y<hy < h, and raise it if y>hy > h. Thus, the stationary point (minimum) occurs precisely when the surface height equals the system's center of mass height, dhdy=0  ⟺  h(y∗)=y∗\frac{dh}{dy} = 0 \iff h(y^*) = y^*.

Setting h(y)=yh(y) = y: H2+y22(H+y)=y\frac{H^2 + y^2}{2(H + y)} = y

Multiply both sides by 2(H+y)2(H + y): H2+y2=2Hy+2y2H^2 + y^2 = 2Hy + 2y^2

Rearrange into standard quadratic form: y2+2Hy−H2=0y^2 + 2Hy - H^2 = 0


04

Solve for y∗y^* and evaluate hminh_{\text{min}}

Apply the quadratic formula to solve for yy: y=−2H±(2H)2−4(1)(−H2)2=−2H±8H22=H(2−1)y = \frac{-2H \pm \sqrt{(2H)^2 - 4(1)(-H^2)}}{2} = \frac{-2H \pm \sqrt{8H^2}}{2} = H(\sqrt{2} - 1)

Since depth must be positive, we take the positive root: y∗=H(2−1)y^* = H(\sqrt{2} - 1)

Substitute H=16.0 cmH = 16.0\text{ cm}: y∗=16.0⋅(2−1)≈16.0⋅0.41421=6.6274 cm≈6.63 cmy^* = 16.0 \cdot (\sqrt{2} - 1) \approx 16.0 \cdot 0.41421 = 6.6274\text{ cm} \approx 6.63\text{ cm}

Since hmin=y∗h_{\text{min}} = y^*: hmin=6.63 cmh_{\text{min}} = 6.63\text{ cm}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student incorrectly assumes the center of mass of the water column is at its full surface height y instead of its midpoint y/2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    M=240 g,  yb=8.0 cmM = 240\text{ g},\; y_b = 8.0\text{ cm}

  2. Step 2

    m(y)=(48016.0)y=30y  ⟹  yw=ym(y) = \left(\frac{480}{16.0}\right)y = 30y \implies y_w = y

    Correct

    mwater, full=480 g−240 g=240 g  ⟹  m(y)=24016.0y=15y;  yw=y2m_{\text{water, full}} = 480\text{ g} - 240\text{ g} = 240\text{ g} \implies m(y) = \frac{240}{16.0}y = 15y;\; y_w = \frac{y}{2}

    A uniform column of liquid of depth yy has its center of mass at half its depth, yw=y2y_w = \frac{y}{2}, not at the top surface yy. Additionally, the water alone has mass mwater=480 g−240 g=240 gm_{\text{water}} = 480\text{ g} - 240\text{ g} = 240\text{ g} when full, giving m(y)=15ym(y) = 15y.

  3. Step 3

    ycm=240⋅8+30y⋅y240+30y=64+y28+yy_{\text{cm}} = \frac{240 \cdot 8 + 30y \cdot y}{240 + 30y} = \frac{64 + y^2}{8 + y}

    Correct

    ycm=240(8.0)+(15y)(y2)240+15y=16.02+y22(16.0+y)=256+y22(16+y)y_{\text{cm}} = \frac{240(8.0) + (15y)\left(\frac{y}{2}\right)}{240 + 15y} = \frac{16.0^2 + y^2}{2(16.0 + y)} = \frac{256 + y^2}{2(16 + y)}

    Because you used yw=yy_w = y and m(y)=30ym(y) = 30y, the expression for ycmy_{\text{cm}} inherited those errors, though your algebraic reduction of your expression was carried out consistently.

  4. Step 4

    At minimum, ycm=y  ⟹  y=64+y28+y  ⟹  8y+y2=64+y2  ⟹  8y=64  ⟹  y∗=8.0 cm,  hmin=8.0 cm\text{At minimum, } y_{\text{cm}} = y \implies y = \frac{64+y^2}{8+y} \implies 8y + y^2 = 64 + y^2 \implies 8y = 64 \implies y^* = 8.0\text{ cm},\; h_{\text{min}} = 8.0\text{ cm}

    Correct

    y=256+y22(16+y)  ⟹  y2+32y−256=0  ⟹  y∗=16(2−1)≈6.63 cm,  hmin≈6.63 cmy = \frac{256 + y^2}{2(16 + y)} \implies y^2 + 32y - 256 = 0 \implies y^* = 16(\sqrt{2} - 1) \approx 6.63\text{ cm},\; h_{\text{min}} \approx 6.63\text{ cm}

    Your physical condition ycm=yy_{\text{cm}} = y is insightful and correct. However, setting yw=yy_w = y erroneously canceled the y2y^2 term on both sides, yielding 8.0 cm8.0\text{ cm} instead of 6.63 cm6.63\text{ cm}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the center of mass of the empty beaker as its geometric midpoint.

You used the powerful physical insight that the minimum center of mass occurs when the system's center of mass coincides with the liquid surface.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Center of mass location for a uniform continuous body

You set the water's center of mass to its surface height yy instead of its geometric midpoint y2\frac{y}{2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the total height of a continuous uniform body with the location of its center of mass. For any uniform object with symmetric vertical mass distribution, the center of mass is located at its midpoint, not at its upper boundary.

REASONING PATH
Your ACEpath teacher’s suggested approach
Continuous Uniform Column Center of Mass
  • For a uniform vertical cylinder or column of height hh, the center of mass is located at ycm=h2y_{\text{cm}} = \frac{h}{2} above the base.

  • Always represent the position coordinate of the liquid column as y2\frac{y}{2} when setting up the weighted center of mass formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. The mass of the water column is m(y)=M(yH)m(y) = M\left(\frac{y}{H}\right), and its center of mass is yw=y2y_w = \frac{y}{2}.

  2. Form the combined center of mass: ycm=M(H2)+M(yH)(y2)M+M(yH)=H2+y22(H+y)y_{\text{cm}} = \frac{M\left(\frac{H}{2}\right) + M\left(\frac{y}{H}\right)\left(\frac{y}{2}\right)}{M + M\left(\frac{y}{H}\right)} = \frac{H^2 + y^2}{2(H + y)}.

  3. Apply the stationary condition ycm=yy_{\text{cm}} = y: H2+y22(H+y)=y  ⟹  H2+y2=2Hy+2y2  ⟹  y2+2Hy−H2=0\frac{H^2 + y^2}{2(H + y)} = y \implies H^2 + y^2 = 2Hy + 2y^2 \implies y^2 + 2Hy - H^2 = 0.

  4. Solve for the positive root: y∗=H(2−1)=16.0(2−1)≈6.63 cmy^* = H(\sqrt{2} - 1) = 16.0(\sqrt{2} - 1) \approx 6.63\text{ cm}.

Final answer

y∗=6.63 cm,  hmin=6.63 cmy^* = 6.63\text{ cm},\; h_{\text{min}} = 6.63\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that every component's position coordinate in ∑miyi\sum m_i y_i represents the center of mass of that component, not its top boundary.

  • Practice setting up variable-mass center-of-mass problems by clearly sketching each body and labeling each individual center of mass yˉi\bar{y}_i before substituting into the formula.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the minimum condition by simply minimizing the numerator of the center of mass function rather than differentiating the quotient.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ycm=M(H/2)+m(y)(y/2)M+m(y)  ⟹  ycm=240⋅8+15y2240+30yy_{\text{cm}} = \frac{M(H/2) + m(y)(y/2)}{M + m(y)} \implies y_{\text{cm}} = \frac{240 \cdot 8 + 15y^2}{240 + 30y}

  2. Step 2

    Minimize numerator 1920+15y2:ddy(1920+15y2)=30y=0\text{Minimize numerator } 1920 + 15y^2: \frac{d}{dy}(1920 + 15y^2) = 30y = 0

    Correct

    ddy[ycm(y)]=0  ⟺  ycm(y∗)=y∗  ⟹  H2+y22(H+y)=y\frac{d}{dy}\left[y_{\text{cm}}(y)\right] = 0 \iff y_{\text{cm}}(y^*) = y^* \implies \frac{H^2 + y^2}{2(H + y)} = y

    You minimized only the numerator of ycm(y)y_{\text{cm}}(y). Because the denominator also depends on yy (the total mass varies as water evaporates), you must either apply the quotient rule to differentiate the full expression or use the physical principle that the minimum occurs when the center of mass lies exactly on the water surface, ycm=yy_{\text{cm}} = y.

  3. Step 3

    y∗=0 cm  ⟹  hmin=1920240=8.0 cmy^* = 0\text{ cm} \implies h_{\text{min}} = \frac{1920}{240} = 8.0\text{ cm}

    Correct

    y∗=H(2−1)≈6.63 cm  ⟹  hmin=6.63 cmy^* = H(\sqrt{2} - 1) \approx 6.63\text{ cm} \implies h_{\text{min}} = 6.63\text{ cm}

    This result follows directly from setting only the numerator derivative to zero. A depth of y∗=0 cmy^* = 0\text{ cm} represents an empty beaker, which corresponds to the final state rather than the intermediate minimum height described in the problem.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly expressed the composite center-of-mass equation in terms of the individual components' masses and centers of gravity.

You correctly placed the empty beaker's center of mass at its midpoint y=8.0 cmy = 8.0\text{ cm}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ignoring variable denominator during optimization

You differentiated only the numerator of a rational function to find its minimum, treating the denominator as if it were a constant.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When optimizing a rational function h(y)=f(y)g(y)h(y) = \frac{f(y)}{g(y)} where the denominator g(y)g(y) varies with yy, setting f′(y)=0f'(y) = 0 is mathematically invalid because changes in yy simultaneously alter both the numerator and the denominator. In this physical problem, adding or evaporating liquid changes both the total first moment and the total mass. The stationary point dhdy=0\frac{dh}{dy} = 0 occurs precisely when the center of mass coincides with the liquid surface (h=yh = y).

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Surface Criterion
  • For a container with evaporating or draining liquid, the center of mass reaches its minimum height exactly when it lies on the liquid's free surface: ycm(y∗)=y∗y_{\text{cm}}(y^*) = y^*.

  • Set ycm(y)=yy_{\text{cm}}(y) = y and solve the resulting quadratic equation instead of taking an unneeded derivative.

Quotient Rule Optimization
  • If differentiating directly, ddy[f(y)g(y)]=f′(y)g(y)−f(y)g′(y)[g(y)]2=0  ⟹  f′(y)g(y)−f(y)g′(y)=0\frac{d}{dy}\left[\frac{f(y)}{g(y)}\right] = \frac{f'(y)g(y) - f(y)g'(y)}{[g(y)]^2} = 0 \implies f'(y)g(y) - f(y)g'(y) = 0.

  • Always account for the rate of change of the denominator when finding extrema of rational functions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the condition for minimum center-of-mass height: the center of mass must lie at the liquid surface, so ycm=yy_{\text{cm}} = y.

  2. Substitute mwater, full=480 g−240 g=240 g=Mm_{\text{water, full}} = 480\text{ g} - 240\text{ g} = 240\text{ g} = M, giving ycm(y)=H2+y22(H+y)y_{\text{cm}}(y) = \frac{H^2 + y^2}{2(H + y)}.

  3. Equate ycm(y)y_{\text{cm}}(y) to yy: H2+y22(H+y)=y  ⟹  H2+y2=2Hy+2y2\frac{H^2 + y^2}{2(H + y)} = y \implies H^2 + y^2 = 2Hy + 2y^2.

  4. Rearrange to standard form: y2+2Hy−H2=0y^2 + 2Hy - H^2 = 0.

  5. Solve for positive yy: y∗=H(2−1)=16.0(2−1)≈6.63 cmy^* = H(\sqrt{2} - 1) = 16.0(\sqrt{2} - 1) \approx 6.63\text{ cm}.

Final answer

y∗=6.63 cmy^* = 6.63\text{ cm}, with hmin=6.63 cmh_{\text{min}} = 6.63\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice using the physical boundary condition ycm=yy_{\text{cm}} = y for liquid-container minimum center-of-mass problems.

  • Review optimization of rational functions using the quotient rule to avoid dropping the denominator.

OverviewACEpath Teacher's Diagnosis

03 The student omits the beaker mass in the denominator when calculating the system center of mass, dividing only by the total water mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ycm=240⋅8+15y2mw  ⟹  ycm=1920+15y2480=4+132y2y_{cm} = \frac{240 \cdot 8 + 15 y^2}{m_w} \implies y_{cm} = \frac{1920 + 15 y^2}{480} = 4 + \frac{1}{32} y^2

    Correct

    ycm(y)=Myb+m(y)ywM+m(y)=240⋅8+(30y)(y2)240+30y=1920+15y2240+30yy_{cm}(y) = \frac{M y_b + m(y) y_w}{M + m(y)} = \frac{240 \cdot 8 + (30y)\left(\frac{y}{2}\right)}{240 + 30y} = \frac{1920 + 15y^2}{240 + 30y}

    You included the mass moment of the beaker (240×8240 \times 8) and the water column (15y215y^2) in the numerator, but the denominator of the center-of-mass definition must be the total instantaneous mass of the entire system, Mtotal(y)=Mbeaker+mwater(y)M_{\text{total}}(y) = M_{\text{beaker}} + m_{\text{water}}(y). By dividing only by the constant initial water mass 480 g480\text{ g}, you omitted the beaker's mass from the total and treated the water mass as non-varying.

  2. Step 2

    dycmdy=116y=0  ⟹  y∗=0 cm\frac{dy_{cm}}{dy} = \frac{1}{16} y = 0 \implies y^* = 0\text{ cm}

    Correct

    dycmdy=0  ⟺  ycm(y∗)=y∗  ⟹  y∗=16.0(2−1)≈6.63 cm\frac{dy_{cm}}{dy} = 0 \iff y_{cm}(y^*) = y^* \implies y^* = 16.0(\sqrt{2} - 1) \approx 6.63\text{ cm}

    Because your expression for ycmy_{cm} was a simple upward parabola due to the constant denominator, differentiation led to the erroneous result that the minimum occurs when the beaker is completely dry (y∗=0y^* = 0). With the variable denominator, the stationary point occurs where the center of mass meets the water surface.

  3. Step 3

    hmin=4.0 cmh_{\text{min}} = 4.0\text{ cm}

    Correct

    hmin=y∗≈6.63 cmh_{\text{min}} = y^* \approx 6.63\text{ cm}

    Substituting y∗=0 cmy^* = 0\text{ cm} into your parabolic equation gave 4.0 cm4.0\text{ cm}, which propagated from the incorrect mass formulation in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly located the center of mass of the uniform empty beaker at its midpoint (yb=8 cmy_b = 8\text{ cm}).

You correctly represented the height of the water column's center of mass as half its depth (y/2y/2).

You correctly applied calculus to locate the extremum of your formulated function.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Variable-mass system denominator omission

You substituted the constant initial mass into the denominator rather than expressing the denominator as a function of the remaining water depth yy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misunderstanding the definition of center of mass for a variable-composition system: in ycm=∑miyi∑miy_{cm} = \frac{\sum m_i y_i}{\sum m_i}, the denominator represents the instantaneous total mass of all system components present at that moment, which varies as water evaporates.

REASONING PATH
Your ACEpath teacher’s suggested approach
Instantaneous Total Mass Check
  • For any multi-body system where contents change, Mtotal=∑mi(t)M_{\text{total}} = \sum m_i(t) must include every component present at that specific state.

  • Always write out Mtotal(y)=Mcontainer+mliquid(y)M_{\text{total}}(y) = M_{\text{container}} + m_{\text{liquid}}(y) before performing algebraic division or differentiation.

Physical Equilibrium Intuition
  • At the minimum height of the center of mass, the system's center of mass must lie exactly on the liquid's free surface: ycm(y∗)=y∗y_{cm}(y^*) = y^*.

  • Use ycm=yy_{cm} = y as a rapid solvability shortcut instead of carrying out the quotient rule on dycmdy=0\frac{dy_{cm}}{dy} = 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the total instantaneous mass of the system as a function of remaining depth yy: Mtotal(y)=240+30yM_{\text{total}}(y) = 240 + 30y (since the linear water density is 480 g16 cm=30 g/cm\frac{480\text{ g}}{16\text{ cm}} = 30\text{ g/cm}, or with M=mwater, full=240 gM = m_{\text{water, full}} = 240\text{ g}, m(y)=MyHm(y) = M\frac{y}{H}).

  2. Form the true center-of-mass function: ycm(y)=MH2+MyHy2M+MyH=H2+y22(H+y)y_{cm}(y) = \frac{M\frac{H}{2} + M\frac{y}{H}\frac{y}{2}}{M + M\frac{y}{H}} = \frac{H^2 + y^2}{2(H + y)}.

  3. Set ycm(y∗)=y∗y_{cm}(y^*) = y^* at the minimum: H2+y22(H+y)=y  ⟹  y2+2Hy−H2=0\frac{H^2 + y^2}{2(H + y)} = y \implies y^2 + 2Hy - H^2 = 0.

  4. Solve for the positive root: y∗=H(2−1)=16.0×0.4142=6.63 cmy^* = H(\sqrt{2} - 1) = 16.0 \times 0.4142 = 6.63\text{ cm}.

Final answer

y∗=6.63 cm,hmin=6.63 cmy^* = 6.63\text{ cm},\quad h_{\text{min}} = 6.63\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice setting up center-of-mass equations where one part of the system has variable mass.

  • Verify limiting behavior: check that ycm(0)=H2=8 cmy_{cm}(0) = \frac{H}{2} = 8\text{ cm} (empty beaker) and ycm(H)=H2=8 cmy_{cm}(H) = \frac{H}{2} = 8\text{ cm} (full beaker).

Lock it in

Similar question

01

A uniform open cylindrical can of mass MM and height HH has a thin base of negligible mass. It is filled with liquid of mass MM up to height yy. Write the expression for the center of mass height h(y)h(y) in terms of HH and yy.

Answer

h(y)=H2+y22(H+y)h(y) = \frac{H^2 + y^2}{2(H + y)}. Key steps: The can's center of mass is at H2\frac{H}{2}, liquid mass is m(y)=MyHm(y) = M\frac{y}{H} with center of mass at y2\frac{y}{2}. Substitute into h=M(H/2)+m(y)(y/2)M+m(y)h = \frac{M(H/2) + m(y)(y/2)}{M + m(y)}.

02

A cylindrical container of mass M=300 gM = 300\text{ g} and height H=20 cmH = 20\text{ cm} holds a liquid whose total full mass is M=300 gM = 300\text{ g}. Find the depth y∗y^* at which the overall center of mass is lowest.

Answer

y∗=20(2−1)≈8.28 cmy^* = 20(\sqrt{2} - 1) \approx 8.28\text{ cm}. Key steps: Set h(y)=y  ⟹  H2+y22(H+y)=y  ⟹  y2+2Hy−H2=0h(y) = y \implies \frac{H^2 + y^2}{2(H + y)} = y \implies y^2 + 2Hy - H^2 = 0. The positive root is y∗=H(2−1)=20(0.4142)=8.28 cmy^* = H(\sqrt{2} - 1) = 20(0.4142) = 8.28\text{ cm}.

03

A cylindrical cup has mass MM and height HH. When completely full, the liquid inside has mass 2M2M (twice the cup's mass). Find the depth y∗y^* where the combined center of mass reaches its minimum height.

Answer

y∗=H(3−12)≈0.366Hy^* = H\left(\frac{\sqrt{3} - 1}{2}\right) \approx 0.366 H. Key steps: Liquid mass at depth yy is m(y)=2MyHm(y) = 2M\frac{y}{H} at height y2\frac{y}{2}. Total center of mass is h(y)=M(H/2)+2M(y/H)(y/2)M+2M(y/H)=H2+2y22(H+2y)h(y) = \frac{M(H/2) + 2M(y/H)(y/2)}{M + 2M(y/H)} = \frac{H^2 + 2y^2}{2(H + 2y)}. Set h(y∗)=y∗  ⟹  H2+2y2=2Hy+4y2  ⟹  2y2+2Hy−H2=0h(y^*) = y^* \implies H^2 + 2y^2 = 2Hy + 4y^2 \implies 2y^2 + 2Hy - H^2 = 0. Solving gives y∗=−2H+4H2+8H24=H3−12y^* = \frac{-2H + \sqrt{4H^2 + 8H^2}}{4} = H\frac{\sqrt{3}-1}{2}.

Loading workspace…