Resources

Absolute zero is defined thermodynamically as 0.00 K0.00\text{ K}, representing the theoretical lower boundary for temperature. Calculate: (a) absolute zero expressed in degrees Celsius (∘C^\circ\text{C}), (b) absolute zero expressed in degrees Fahrenheit (∘F^\circ\text{F}), and (c) the exact temperature at which the numerical reading on the Celsius scale is identically equal to the numerical reading on the Fahrenheit scale (TC=TFT_\text{C} = T_\text{F}).

Answer and steps

Final answer

(a) −273.15∘C-273.15^\circ\text{C}; (b) −459.67∘F-459.67^\circ\text{F}; (c) −40.0∘C=−40.0∘F-40.0^\circ\text{C} = -40.0^\circ\text{F}

Steps

Part (a): Absolute Zero in Celsius

The relationship between the Kelvin absolute temperature scale (TT) and the Celsius scale (TCT_\text{C}) is defined as:

TC=T−273.15T_\text{C} = T - 273.15

Substitute absolute zero, T=0.00 KT = 0.00\text{ K}:

TC=0.00−273.15=−273.15∘CT_\text{C} = 0.00 - 273.15 = -273.15^\circ\text{C}


Part (b): Absolute Zero in Fahrenheit

The standard conversion formula from degrees Celsius (TCT_\text{C}) to degrees Fahrenheit (TFT_\text{F}) is:

TF=95TC+32T_\text{F} = \frac{9}{5}T_\text{C} + 32

Substitute the Celsius value of absolute zero, TC=−273.15∘CT_\text{C} = -273.15^\circ\text{C}:

TF=95(−273.15)+32T_\text{F} = \frac{9}{5}(-273.15) + 32

TF=−491.67+32=−459.67∘FT_\text{F} = -491.67 + 32 = -459.67^\circ\text{F}

Pitfall to avoid: Do not round 273.15273.15 to 273273, as standard thermodynamic definitions retain the two decimal places, yielding −459.67∘F-459.67^\circ\text{F} rather than −459.4∘F-459.4^\circ\text{F}.


Part (c): Temperature where Celsius and Fahrenheit Scales Coincide

To find the point where both scales have the same numerical reading, set TC=TF=xT_\text{C} = T_\text{F} = x:

x=95x+32x = \frac{9}{5}x + 32

Subtract 95x\frac{9}{5}x from both sides:

x−95x=32x - \frac{9}{5}x = 32

−45x=32-\frac{4}{5}x = 32

Multiply both sides by −54-\frac{5}{4}:

x=32⋅(−54)=−40.0x = 32 \cdot \left(-\frac{5}{4}\right) = -40.0

Therefore, the numerical reading is identical at:

−40.0∘C=−40.0∘F-40.0^\circ\text{C} = -40.0^\circ\text{F}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the addition and subtraction of the freezing-point offset in the Fahrenheit conversion formula, subtracting 32 instead of adding 32.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    TC=0.00−273.15  ⟹  TC=−273.15∘CT_\text{C} = 0.00 - 273.15 \implies T_\text{C} = -273.15^\circ\text{C}

  2. Step 2

    TF=(95)(−273.15)−32  ⟹  TF=−491.67−32  ⟹  TF=−523.67∘FT_\text{F} = \left(\frac{9}{5}\right)(-273.15) - 32 \implies T_\text{F} = -491.67 - 32 \implies T_\text{F} = -523.67^\circ\text{F}

    Correct

    TF=95(−273.15)+32=−491.67+32=−459.67∘FT_\text{F} = \frac{9}{5}(-273.15) + 32 = -491.67 + 32 = -459.67^\circ\text{F}

    You subtracted 3232 instead of adding 3232. The conversion from Celsius to Fahrenheit is TF=95TC+32T_\text{F} = \frac{9}{5}T_\text{C} + 32, because 0∘C0^\circ\text{C} corresponds to +32∘F+32^\circ\text{F}.

  3. Step 3

    T=(95)T+32  ⟹  −(45)T=32  ⟹  T=−40∘C=−40∘FT = \left(\frac{9}{5}\right)T + 32 \implies -\left(\frac{4}{5}\right)T = 32 \implies T = -40^\circ\text{C} = -40^\circ\text{F}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the offset of 273.15273.15 to convert Kelvin to Celsius.

You correctly set up and solved the linear equation for the scale coincidence point in part (c).

You evaluated arithmetic and fractions accurately throughout your work.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in temperature conversion offset

In part (b), you wrote −32- 32 instead of +32+ 32 when converting from Celsius to Fahrenheit.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of the freezing-point offset between the two scales (+32+32 when converting ∘C→∘F^\circ\text{C} \to ^\circ\text{F} versus −32-32 when converting ∘F→∘C^\circ\text{F} \to ^\circ\text{C}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Freezing Point Sanity Check
  • Water freezes at 0∘C0^\circ\text{C} and 32∘F32^\circ\text{F}, so TF=95TC+32T_\text{F} = \frac{9}{5}T_\text{C} + 32.

  • Before calculating, test TC=0T_\text{C} = 0: substituting 00 must yield +32+32, confirming that 3232 is added, not subtracted.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the standard conversion formula: TF=95TC+32T_\text{F} = \frac{9}{5}T_\text{C} + 32.

  2. Substitute TC=−273.15∘CT_\text{C} = -273.15^\circ\text{C}: TF=95(−273.15)+32T_\text{F} = \frac{9}{5}(-273.15) + 32.

  3. Multiply and add the offset: TF=−491.67+32=−459.67∘FT_\text{F} = -491.67 + 32 = -459.67^\circ\text{F}.

Final answer

(a) −273.15∘C-273.15^\circ\text{C}; (b) −459.67∘F-459.67^\circ\text{F}; (c) −40.0∘C=−40.0∘F-40.0^\circ\text{C} = -40.0^\circ\text{F}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always run a quick check with TC=0∘CT_\text{C} = 0^\circ\text{C} to verify whether you need to add or subtract 3232.

  • Notice that in part (c) you correctly wrote T=95T+32T = \frac{9}{5}T + 32; keep that same formula when substituting numbers in part (b).

OverviewACEpath Teacher's Diagnosis

02 The student inverts the scaling factor ratio between Celsius and Fahrenheit degrees, using 5/9 instead of 9/5 in the conversion to Fahrenheit.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    TC=0.00−273.15  ⟹  TC=−273.15∘CT_\text{C} = 0.00 - 273.15 \implies T_\text{C} = -273.15^\circ\text{C}

  2. Step 2

    TF=(59)TC+32  ⟹  TF=(59)(−273.15)+32  ⟹  TF=−151.75+32  ⟹  TF=−119.75∘FT_\text{F} = \left(\frac{5}{9}\right)T_\text{C} + 32 \implies T_\text{F} = \left(\frac{5}{9}\right)(-273.15) + 32 \implies T_\text{F} = -151.75 + 32 \implies T_\text{F} = -119.75^\circ\text{F}

    Correct

    TF=95TC+32  ⟹  TF=95(−273.15)+32=−459.67∘FT_\text{F} = \frac{9}{5}T_\text{C} + 32 \implies T_\text{F} = \frac{9}{5}(-273.15) + 32 = -459.67^\circ\text{F}

    You used the scaling factor 59\frac{5}{9} instead of 95\frac{9}{5} when converting from Celsius to Fahrenheit. Because each Celsius degree spans 1.81.8 (=95=\frac{9}{5}) Fahrenheit degrees, TCT_\text{C} must be scaled up by 95\frac{9}{5} before adding 3232.

  3. Step 3

    T=(95)T+32  ⟹  −(45)T=32  ⟹  T=−40∘C=−40∘FT = \left(\frac{9}{5}\right)T + 32 \implies -\left(\frac{4}{5}\right)T = 32 \implies T = -40^\circ\text{C} = -40^\circ\text{F}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the Kelvin-to-Celsius offset formula TC=T−273.15T_\text{C} = T - 273.15.

You set up the identity equation TC=TFT_\text{C} = T_\text{F} and solved the linear equation for −40∘-40^\circ with complete algebraic accuracy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Conversion Ratio

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You swapped the conversion factor between temperature scales, applying 59\frac{5}{9} instead of 95\frac{9}{5} to convert Celsius to Fahrenheit. Remembering that 100∘C100^\circ\text{C} corresponds to 180∘F180^\circ\text{F} helps confirm that going from Celsius to Fahrenheit requires multiplying by the larger ratio, 180100=95\frac{180}{100} = \frac{9}{5}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Scaling Factor Direction
  • ΔTF=95ΔTC\Delta T_\text{F} = \frac{9}{5}\Delta T_\text{C} and ΔTC=59ΔTF\Delta T_\text{C} = \frac{5}{9}\Delta T_\text{F}

  • Check whether your output scale has smaller or larger degree increments. A Celsius degree is larger, so going to Fahrenheit must increase the degree count by multiplying by 95\frac{9}{5}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute TC=−273.15∘CT_\text{C} = -273.15^\circ\text{C} into TF=95TC+32T_\text{F} = \frac{9}{5}T_\text{C} + 32.

  2. Compute 95(−273.15)=−491.67\frac{9}{5}(-273.15) = -491.67.

  3. Add the offset: −491.67+32=−459.67∘F-491.67 + 32 = -459.67^\circ\text{F}.

Final answer

(a) −273.15∘C-273.15^\circ\text{C}; (b) −459.67∘F-459.67^\circ\text{F}; (c) −40.0∘C=−40.0∘F-40.0^\circ\text{C} = -40.0^\circ\text{F}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before calculating, perform a benchmark sanity check: since 0∘C=32∘F0^\circ\text{C} = 32^\circ\text{F} and 100∘C=212∘F100^\circ\text{C} = 212^\circ\text{F}, verify that your formula gives 212212 when you input 100100.

  • Notice that in part (c) you wrote T=(95)T+32T = \left(\frac{9}{5}\right)T + 32 correctly; always cross-check your formulas across sub-parts when solving related conversions.

OverviewACEpath Teacher's Diagnosis

03 The student sets up the equation for equal scale readings with an algebraic sign error when isolating the variable, obtaining positive 40 instead of -40.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    TC=0.00−273.15  ⟹  TC=−273.15∘CT_\text{C} = 0.00 - 273.15 \implies T_\text{C} = -273.15^\circ\text{C}

  2. Step 2

    TF=(95)(−273.15)+32  ⟹  TF=−491.67+32  ⟹  TF=−459.67∘FT_\text{F} = \left(\frac{9}{5}\right)(-273.15) + 32 \implies T_\text{F} = -491.67 + 32 \implies T_\text{F} = -459.67^\circ\text{F}

  3. Step 3

    T=(95)T+32  ⟹  (45)T=32T = \left(\frac{9}{5}\right)T + 32 \implies \left(\frac{4}{5}\right)T = 32

    Correct

    T−95T=32  ⟹  −45T=32T - \frac{9}{5}T = 32 \implies -\frac{4}{5}T = 32

    When you subtracted 95T\frac{9}{5}T from both sides of T=95T+32T = \frac{9}{5}T + 32, the left-hand side became T−95T=−45TT - \frac{9}{5}T = -\frac{4}{5}T. You dropped the negative sign, writing 45T=32\frac{4}{5}T = 32.

  4. Step 4

    T=32∗(54)  ⟹  T=40∘C=40∘FT = 32 * \left(\frac{5}{4}\right) \implies T = 40^\circ\text{C} = 40^\circ\text{F}

    Correct

    T=32⋅(−54)=−40.0∘C=−40.0∘FT = 32 \cdot \left(-\frac{5}{4}\right) = -40.0^\circ\text{C} = -40.0^\circ\text{F}

    Because of the missing negative sign in the previous step, your final numerical value resulted in +40+40 instead of −40-40.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the offset of 273.15273.15 to convert from Kelvin to Celsius.

You correctly substituted the negative Celsius value into the linear conversion formula for Fahrenheit.

You accurately identified that setting TC=TF=TT_\text{C} = T_\text{F} = T is the right condition for finding where the scales coincide.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error during linear equation isolation

You dropped the negative sign when subtracting 95T\frac{9}{5}T from 1T1T, treating 1−951 - \frac{9}{5} as +45+\frac{4}{5} instead of −45-\frac{4}{5}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete accounting of signs when subtracting a larger fractional coefficient from 11: 1−95=55−95=−451 - \frac{9}{5} = \frac{5}{5} - \frac{9}{5} = -\frac{4}{5}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Fractional Subtraction Check
  • 1⋅x−abx=b−abx1 \cdot x - \frac{a}{b}x = \frac{b - a}{b}x

  • Write 1T1T explicitly as 55T\frac{5}{5}T before subtracting 95T\frac{9}{5}T to confirm that the resulting coefficient is negative.

Qualitative Plausibility Check
  • At 0∘C0^\circ\text{C}, Fahrenheit is 32∘F32^\circ\text{F} (higher). Above freezing, Fahrenheit values are always higher than Celsius values.

  • Recognize that the two scales must intersect at a negative temperature below 0∘0^\circ, never at +40∘+40^\circ where 40∘C=104∘F40^\circ\text{C} = 104^\circ\text{F}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract 95T\frac{9}{5}T from both sides: T−95T=32T - \frac{9}{5}T = 32

  2. Combine coefficients: (1−95)T=−45T=32\left(1 - \frac{9}{5}\right)T = -\frac{4}{5}T = 32

  3. Multiply both sides by −54-\frac{5}{4}: T=32⋅(−54)=−40T = 32 \cdot \left(-\frac{5}{4}\right) = -40

Final answer

−40.0∘C=−40.0∘F-40.0^\circ\text{C} = -40.0^\circ\text{F}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out TT as 55T\frac{5}{5}T when subtracting fractions with a denominator of 55.

  • Perform a quick check by plugging the answer back in: 95(−40)+32=−72+32=−40\frac{9}{5}(-40) + 32 = -72 + 32 = -40.

Lock it in

Similar question

01

Convert the normal boiling point of water, 100.0∘C100.0^\circ\text{C}, into both degrees Fahrenheit (∘F^\circ\text{F}) and Kelvin (K\text{K}).

Answer

TF=95(100.0)+32=180.0+32=212.0∘FT_\text{F} = \frac{9}{5}(100.0) + 32 = 180.0 + 32 = 212.0^\circ\text{F}. T=100.0+273.15=373.15 KT = 100.0 + 273.15 = 373.15\text{ K}.

02

A clinical thermometer records a human body temperature of 98.6∘F98.6^\circ\text{F}. Convert this reading to degrees Celsius (∘C^\circ\text{C}) and Kelvin (K\text{K}).

Answer

TC=59(98.6−32)=59(66.6)=37.0∘CT_\text{C} = \frac{5}{9}(98.6 - 32) = \frac{5}{9}(66.6) = 37.0^\circ\text{C}. T=37.0+273.15=310.15 KT = 37.0 + 273.15 = 310.15\text{ K}.

03

Solid carbon dioxide (dry ice) sublimes at −78.5∘C-78.5^\circ\text{C} at atmospheric pressure. Calculate its temperature in degrees Fahrenheit (∘F^\circ\text{F}) and in Kelvin (K\text{K}).

Answer

TF=95(−78.5)+32=−141.3+32=−109.3∘FT_\text{F} = \frac{9}{5}(-78.5) + 32 = -141.3 + 32 = -109.3^\circ\text{F}. T=−78.5+273.15=194.65 KT = -78.5 + 273.15 = 194.65\text{ K}.

Loading workspace…