Resources

A diver descends vertically beneath the surface of a freshwater lake (ρ=1.00×103 kg/m3\rho = 1.00 \times 10^3\text{ kg/m}^3). Taking a vertical coordinate axis where y=0y = 0 at the lake surface and the positive yy-axis points vertically upward into the air (such that depth h=−yh = -y), the fundamental hydrostatic gradient is dPdy=−ρg\frac{dP}{dy} = -\rho g. Given surface atmospheric pressure Patm=1.013×105 PaP_{\text{atm}} = 1.013 \times 10^5\text{ Pa} and g=9.80 m/s2g = 9.80\text{ m/s}^2: (a) evaluate the absolute pressure PP at coordinate y=−18.0 my = -18.0\text{ m}; (b) identify whether the gauge pressure Pgauge=P−PatmP_{\text{gauge}} = P - P_{\text{atm}} at this location is positive or negative, and calculate its value in Pascals.

Answer and steps

Final answer

(a) P=2.78×105 PaP = 2.78 \times 10^5\text{ Pa}; (b) Gauge pressure is positive: Pgauge=+1.76×105 PaP_{\text{gauge}} = +1.76 \times 10^5\text{ Pa}

Steps

Part (a): Absolute Pressure at Coordinate y=−18.0 my = -18.0\text{ m}

  1. Relate Hydrostatic Pressure to Vertical Coordinate: The fundamental hydrostatic differential equation is: dPdy=−ρg\frac{dP}{dy} = -\rho g

    Integrating both sides from the water surface (y0=0y_0 = 0, where P=PatmP = P_{\text{atm}}) down to coordinate yy (where pressure is PP): ∫PatmPdP=∫0y−ρg dy\int_{P_{\text{atm}}}^{P} dP = \int_{0}^{y} -\rho g \, dy P−Patm=−ρg(y−0)=−ρgyP - P_{\text{atm}} = -\rho g (y - 0) = -\rho g y

    Solving for absolute pressure PP: P=Patm−ρgyP = P_{\text{atm}} - \rho g y

    Coordinate Caution: Because the positive yy-axis points upward, any position submerged below the surface has a negative value (y=−18.0 my = -18.0\text{ m}). Depth is given by the positive quantity h=−y=18.0 mh = -y = 18.0\text{ m}, leading to the familiar equation P=Patm+ρghP = P_{\text{atm}} + \rho g h.

  2. Calculate the Hydrostatic Contribution: Substitute the given values for freshwater density, gravity, and depth: ρgh=(1.00×103 kg/m3)(9.80 m/s2)(18.0 m)\rho g h = (1.00 \times 10^3\text{ kg/m}^3)(9.80\text{ m/s}^2)(18.0\text{ m}) ρgh=1.764×105 Pa\rho g h = 1.764 \times 10^5\text{ Pa}
  3. Compute Total Absolute Pressure: P=1.013×105 Pa+1.764×105 Pa=2.777×105 PaP = 1.013 \times 10^5\text{ Pa} + 1.764 \times 10^5\text{ Pa} = 2.777 \times 10^5\text{ Pa}

    Rounding to three significant figures: P=2.78×105 PaP = 2.78 \times 10^5\text{ Pa}


Part (b): Sign and Value of Gauge Pressure

  1. Definition of Gauge Pressure: Gauge pressure measures the pressure relative to local atmospheric pressure: Pgauge=P−PatmP_{\text{gauge}} = P - P_{\text{atm}}
  2. Determine the Sign: Because fluid pressure increases with depth due to the weight of the overlying water column, P>PatmP > P_{\text{atm}} anywhere beneath the surface. Therefore, the gauge pressure is positive.
  3. Calculate the Value: Pgauge=ρgh=1.764×105 PaP_{\text{gauge}} = \rho g h = 1.764 \times 10^5\text{ Pa}

    Rounding to three significant figures: Pgauge=+1.76×105 PaP_{\text{gauge}} = +1.76 \times 10^5\text{ Pa}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the sign of coordinate y with depth, substituting y = -18.0 m into P = P_atm + ρgy and subtracting the hydrostatic pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P=Patm+ρgy  ⟹  P=1.013×105+(1.00×103)(9.80)(−18.0)  ⟹  P=1.013×105−1.764×105=−7.51×104 PaP = P_{\text{atm}} + \rho g y \implies P = 1.013 \times 10^5 + (1.00 \times 10^3)(9.80)(-18.0) \implies P = 1.013 \times 10^5 - 1.764 \times 10^5 = -7.51 \times 10^4\text{ Pa}

    Correct

    P=Patm−ρgy=1.013×105 Pa−(1.00×103 kg/m3)(9.80 m/s2)(−18.0 m)=2.78×105 PaP = P_{\text{atm}} - \rho g y = 1.013 \times 10^5\text{ Pa} - (1.00 \times 10^3\text{ kg/m}^3)(9.80\text{ m/s}^2)(-18.0\text{ m}) = 2.78 \times 10^5\text{ Pa}

    Because the vertical axis points upward, pressure decreases as yy increases (dPdy=−ρg\frac{dP}{dy} = -\rho g). Integrating from the surface (y=0y = 0) gives P=Patm−ρgyP = P_{\text{atm}} - \rho g y, or equivalently P=Patm+ρghP = P_{\text{atm}} + \rho g h where depth h=−y=18.0 mh = -y = 18.0\text{ m}. Submerging deeper into a fluid must increase the pressure above atmospheric pressure.

  2. Step 2

    Pgauge=P−Patm  ⟹  Pgauge=−7.51×104−1.013×105=−1.764×105 Pa  ⟹  Negative, Pgauge=−1.764×105 PaP_{\text{gauge}} = P - P_{\text{atm}} \implies P_{\text{gauge}} = -7.51 \times 10^4 - 1.013 \times 10^5 = -1.764 \times 10^5\text{ Pa} \implies \text{Negative, } P_{\text{gauge}} = -1.764 \times 10^5\text{ Pa}

    Correct

    Pgauge=P−Patm=2.777×105 Pa−1.013×105 Pa=+1.76×105 Pa (positive)P_{\text{gauge}} = P - P_{\text{atm}} = 2.777 \times 10^5\text{ Pa} - 1.013 \times 10^5\text{ Pa} = +1.76 \times 10^5\text{ Pa}\text{ (positive)}

    You applied the correct definition for gauge pressure, Pgauge=P−PatmP_{\text{gauge}} = P - P_{\text{atm}}, but your value and sign were affected by the negative absolute pressure calculated in Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated and applied the definition of gauge pressure as Pgauge=P−PatmP_{\text{gauge}} = P - P_{\text{atm}}.

You performed the arithmetic and unit operations accurately based on your working expressions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Coordinate sign confusion in hydrostatic pressure

You substituted the negative coordinate value y=−18.0 my = -18.0\text{ m} directly into P=Patm+ρgyP = P_{\text{atm}} + \rho g y instead of using the hydrostatic depth relation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the spatial coordinate yy (defined positive upward) with depth hh (measured positive downward). Integrating dPdy=−ρg\frac{dP}{dy} = -\rho g yields P(y)=P0−ρgyP(y) = P_0 - \rho g y. Substituting a negative coordinate must add pressure, reflecting the physical reality that pressure increases with depth.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Reality Check
  • Absolute pressure underwater is always greater than atmospheric pressure (P>PatmP > P_{\text{atm}}), so gauge pressure must be positive.

  • Whenever you compute pressure underwater, verify that your result is strictly greater than 1.013×105 Pa1.013 \times 10^5\text{ Pa}.

Coordinate vs. Depth
  • If positive yy points upward, depth is h=−yh = -y. In terms of yy, P=Patm−ρgyP = P_{\text{atm}} - \rho g y. In terms of depth hh, P=Patm+ρghP = P_{\text{atm}} + \rho g h.

  • Convert the coordinate to a positive depth h=∣y∣h = |y| first, or carefully integrate the differential relation dPdy=−ρg\frac{dP}{dy} = -\rho g.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that with the positive yy-axis pointing upward, depth is h=−y=−(−18.0 m)=18.0 mh = -y = -(-18.0\text{ m}) = 18.0\text{ m}.

  2. Calculate the absolute pressure: P=Patm+ρgh=1.013×105 Pa+(1.00×103 kg/m3)(9.80 m/s2)(18.0 m)=2.78×105 PaP = P_{\text{atm}} + \rho g h = 1.013 \times 10^5\text{ Pa} + (1.00 \times 10^3\text{ kg/m}^3)(9.80\text{ m/s}^2)(18.0\text{ m}) = 2.78 \times 10^5\text{ Pa}.

  3. Calculate gauge pressure: Pgauge=P−Patm=2.78×105 Pa−1.013×105 Pa=+1.76×105 PaP_{\text{gauge}} = P - P_{\text{atm}} = 2.78 \times 10^5\text{ Pa} - 1.013 \times 10^5\text{ Pa} = +1.76 \times 10^5\text{ Pa}.

Final answer

(a) P=2.78×105 PaP = 2.78 \times 10^5\text{ Pa}; (b) Gauge pressure is positive: Pgauge=+1.76×105 PaP_{\text{gauge}} = +1.76 \times 10^5\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice setting up vertical coordinate axes for fluid statics problems to distinguish between vertical position yy and depth hh.

  • Always perform a physical sign check: moving downward in any static fluid column must increase pressure.

OverviewACEpath Teacher's Diagnosis

02 The student confuses absolute pressure with hydrostatic gauge pressure, omitting atmospheric pressure when evaluating P.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P=ρgh  ⟹  P=(1.00×103)(9.80)(18.0)  ⟹  P=1.764×105 PaP = \rho g h \implies P = (1.00 \times 10^3)(9.80)(18.0) \implies P = 1.764 \times 10^5\text{ Pa}

    Correct

    P=Patm+ρgh=1.013×105 Pa+(1.00×103 kg/m3)(9.80 m/s2)(18.0 m)=2.78×105 PaP = P_{\text{atm}} + \rho g h = 1.013 \times 10^5\text{ Pa} + (1.00 \times 10^3\text{ kg/m}^3)(9.80\text{ m/s}^2)(18.0\text{ m}) = 2.78 \times 10^5\text{ Pa}

    You calculated ρgh\rho g h, which represents only the hydrostatic pressure due to the water column (the gauge pressure). Absolute pressure at depth must also include atmospheric pressure acting on the water surface: P=Patm+ρghP = P_{\text{atm}} + \rho g h.

  2. Step 2

    Pgauge=P−Patm  ⟹  Pgauge=1.764×105−1.013×105=7.51×104 PaP_{\text{gauge}} = P - P_{\text{atm}} \implies P_{\text{gauge}} = 1.764 \times 10^5 - 1.013 \times 10^5 = 7.51 \times 10^4\text{ Pa}

    Correct

    Pgauge=P−Patm=ρgh=1.76×105 PaP_{\text{gauge}} = P - P_{\text{atm}} = \rho g h = 1.76 \times 10^5\text{ Pa}

    Your formula Pgauge=P−PatmP_{\text{gauge}} = P - P_{\text{atm}} is correct, but because your value of PP from part (a) was missing PatmP_{\text{atm}}, subtracting PatmP_{\text{atm}} again gave an incorrect numerical result.

  3. Step 3

    Positive,Pgauge=7.51×104 Pa\text{Positive}, P_{\text{gauge}} = 7.51 \times 10^4\text{ Pa}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the hydrostatic formula ρgh\rho g h to find the fluid column pressure contribution.

You used the correct definition of gauge pressure as Pgauge=P−PatmP_{\text{gauge}} = P - P_{\text{atm}}.

You correctly concluded that the gauge pressure submerged below the surface is positive.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Absolute vs. Gauge Pressure Confusion

You equated absolute pressure PP directly to ρgh\rho g h instead of adding atmospheric pressure PatmP_{\text{atm}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the hydrostatic fluid column pressure ρgh\rho g h as the total (absolute) pressure rather than as the pressure increase relative to the atmospheric boundary at the surface.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Absolute and Gauge Pressure
  • Absolute pressure is the total pressure P=Patm+ρghP = P_{\text{atm}} + \rho g h. Gauge pressure is the pressure relative to the atmosphere, Pgauge=P−Patm=ρghP_{\text{gauge}} = P - P_{\text{atm}} = \rho g h.

  • Whenever a problem asks for absolute pressure in an open liquid, always add PatmP_{\text{atm}} to the fluid column term ρgh\rho g h.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include atmospheric pressure in the total pressure: P=Patm+ρgh=1.013×105 Pa+1.764×105 Pa=2.78×105 PaP = P_{\text{atm}} + \rho g h = 1.013 \times 10^5\text{ Pa} + 1.764 \times 10^5\text{ Pa} = 2.78 \times 10^5\text{ Pa}.

  2. Calculate gauge pressure directly: Pgauge=P−Patm=ρgh=+1.76×105 PaP_{\text{gauge}} = P - P_{\text{atm}} = \rho g h = +1.76 \times 10^5\text{ Pa}.

Final answer

(a) P=2.78×105 PaP = 2.78 \times 10^5\text{ Pa}; (b) Gauge pressure is positive: Pgauge=+1.76×105 PaP_{\text{gauge}} = +1.76 \times 10^5\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full relation P=Patm+ρghP = P_{\text{atm}} + \rho g h before plugging in any numbers.

  • Check your work by verifying that at h=0h = 0, P=PatmP = P_{\text{atm}} and Pgauge=0P_{\text{gauge}} = 0.

OverviewACEpath Teacher's Diagnosis

03 The student reverses the definition of gauge pressure as P_atm - P instead of P - P_atm, resulting in a negative gauge pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    h=−y=18.0 m  ⟹  P=Patm+ρgh=1.013×105+(1.00×103)(9.80)(18.0)  ⟹  P=1.013×105+1.764×105=2.777×105 Pah = -y = 18.0\text{ m} \implies P = P_{\text{atm}} + \rho g h = 1.013 \times 10^5 + (1.00 \times 10^3)(9.80)(18.0) \implies P = 1.013 \times 10^5 + 1.764 \times 10^5 = 2.777 \times 10^5\text{ Pa}

  2. Step 2

    Pgauge=Patm−P  ⟹  Pgauge=1.013×105−2.777×105P_{\text{gauge}} = P_{\text{atm}} - P \implies P_{\text{gauge}} = 1.013 \times 10^5 - 2.777 \times 10^5

    Correct

    Pgauge=P−Patm=2.777×105 Pa−1.013×105 PaP_{\text{gauge}} = P - P_{\text{atm}} = 2.777 \times 10^5\text{ Pa} - 1.013 \times 10^5\text{ Pa}

    Gauge pressure measures how much absolute pressure exceeds atmospheric pressure, defined as Pgauge=P−PatmP_{\text{gauge}} = P - P_{\text{atm}}, not Patm−PP_{\text{atm}} - P.

  3. Step 3

    Negative, Pgauge=−1.764×105 Pa\text{Negative, } P_{\text{gauge}} = -1.764 \times 10^5\text{ Pa}

    Correct

    Positive, Pgauge=+1.76×105 Pa\text{Positive, } P_{\text{gauge}} = +1.76 \times 10^5\text{ Pa}

    Because of the reversed subtraction in the preceding step, your gauge pressure obtained a negative sign instead of being positive.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the vertical coordinate y=−18.0 my = -18.0\text{ m} to positive depth h=18.0 mh = 18.0\text{ m}.

You accurately computed the hydrostatic contribution ρgh=1.764×105 Pa\rho g h = 1.764 \times 10^5\text{ Pa}.

You found the correct total absolute pressure P=2.78×105 PaP = 2.78 \times 10^5\text{ Pa}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed definition of gauge pressure

You set up gauge pressure as Patm−PP_{\text{atm}} - P instead of P−PatmP - P_{\text{atm}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated gauge pressure as a difference without keeping track of the reference zero: gauge pressure measures the excess of absolute pressure over atmospheric pressure, so it must be P−PatmP - P_{\text{atm}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Gauge Pressure Reference Baseline
  • Gauge pressure measures pressure relative to local atmospheric pressure: Pgauge=P−PatmP_{\text{gauge}} = P - P_{\text{atm}}.

  • Always subtract atmospheric pressure from absolute pressure, so an open fluid at depth has a positive gauge pressure equal to ρgh\rho g h.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the standard definition: Pgauge=P−PatmP_{\text{gauge}} = P - P_{\text{atm}}.

  2. Substitute your absolute pressure: Pgauge=2.777×105 Pa−1.013×105 Pa=+1.764×105 PaP_{\text{gauge}} = 2.777 \times 10^5\text{ Pa} - 1.013 \times 10^5\text{ Pa} = +1.764 \times 10^5\text{ Pa}.

  3. Round to three significant figures and state the sign: positive, with Pgauge=+1.76×105 PaP_{\text{gauge}} = +1.76 \times 10^5\text{ Pa}.

Final answer

(a) P=2.78×105 PaP = 2.78 \times 10^5\text{ Pa}; (b) Gauge pressure is positive: Pgauge=+1.76×105 PaP_{\text{gauge}} = +1.76 \times 10^5\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that underwater, fluid pressure is greater than atmospheric pressure, so gauge pressure must always be positive.

  • Check that P=Patm+PgaugeP = P_{\text{atm}} + P_{\text{gauge}} whenever converting between absolute and gauge values.

Lock it in

Similar question

01

A research probe is submerged in seawater (ρ=1.025×103 kg/m3\rho = 1.025 \times 10^3\text{ kg/m}^3) at a vertical coordinate y=−25.0 my = -25.0\text{ m}, where y=0y = 0 represents the surface and the positive yy-axis points upward. Taking Patm=1.013×105 PaP_{\text{atm}} = 1.013 \times 10^5\text{ Pa} and g=9.80 m/s2g = 9.80\text{ m/s}^2, find the absolute pressure PP and gauge pressure PgaugeP_{\text{gauge}}.

Answer

P=3.52×105 PaP = 3.52 \times 10^5\text{ Pa}, Pgauge=+2.51×105 PaP_{\text{gauge}} = +2.51 \times 10^5\text{ Pa}. Depth is h=−y=25.0 mh = -y = 25.0\text{ m}. Hydrostatic contribution is ρgh=(1025)(9.80)(25.0)=2.511×105 Pa\rho g h = (1025)(9.80)(25.0) = 2.511 \times 10^5\text{ Pa}. Then P=Patm+ρgh=3.524×105 PaP = P_{\text{atm}} + \rho g h = 3.524 \times 10^5\text{ Pa} and Pgauge=ρgh=+2.51×105 PaP_{\text{gauge}} = \rho g h = +2.51 \times 10^5\text{ Pa}.

02

An open storage tank contains oil of density ρ=850 kg/m3\rho = 850\text{ kg/m}^3. A vertical axis zz has its origin at the bottom of the tank and points upward. The oil surface is at z=6.00 mz = 6.00\text{ m}. Express the absolute pressure P(z)P(z) at any height zz within the oil (0≤z≤6.00 m0 \le z \le 6.00\text{ m}) in terms of PatmP_{\text{atm}}, ρ\rho, gg, and zz, then evaluate the gauge pressure at the bottom (z=0z = 0). Take g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

P(z)=Patm+ρg(6.00−z)P(z) = P_{\text{atm}} + \rho g (6.00 - z); Pgauge(0)=5.00×104 PaP_{\text{gauge}}(0) = 5.00 \times 10^4\text{ Pa}. The depth below the free surface is h=6.00−zh = 6.00 - z. At the bottom (z=0z = 0), h=6.00 mh = 6.00\text{ m}, so Pgauge=ρg(6.00)=(850)(9.80)(6.00)=4.998×104 Pa≈5.00×104 PaP_{\text{gauge}} = \rho g (6.00) = (850)(9.80)(6.00) = 4.998 \times 10^4\text{ Pa} \approx 5.00 \times 10^4\text{ Pa}.

03

A U-tube manometer open to the atmosphere (Patm=1.00×105 PaP_{\text{atm}} = 1.00 \times 10^5\text{ Pa}) contains mercury (ρ=1.36×104 kg/m3\rho = 1.36 \times 10^4\text{ kg/m}^3). In the closed left arm, a gas exerts pressure PgasP_{\text{gas}}. The mercury level in the open right arm is 15.0 cm15.0\text{ cm} higher than in the left arm. Determine whether the gauge pressure of the trapped gas is positive or negative, and compute PgasP_{\text{gas}}. Take g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

Positive; Pgas=1.20×105 PaP_{\text{gas}} = 1.20 \times 10^5\text{ Pa} (Pgauge=+2.00×104 PaP_{\text{gauge}} = +2.00 \times 10^4\text{ Pa}). Balancing pressures at the lower mercury level: Pgas=Patm+ρgΔh=1.00×105+(13600)(9.80)(0.150)=1.00×105+1.999×104=1.20×105 PaP_{\text{gas}} = P_{\text{atm}} + \rho g \Delta h = 1.00 \times 10^5 + (13600)(9.80)(0.150) = 1.00 \times 10^5 + 1.999 \times 10^4 = 1.20 \times 10^5\text{ Pa}.

Loading workspace…