Resources

A specialized nichrome wire resistor is connected directly to a variable direct-current laboratory supply. When a voltmeter reads a steady potential difference of V=18.0 VV = 18.0\text{ V} across the wire, a total of N=7.50×1019N = 7.50 \times 10^{19} conduction electrons pass through a given transverse cross-section of the wire in an exposure time of Δt=40.0 s\Delta t = 40.0\text{ s}. Given that the elementary charge magnitude is e=1.602×10−19 Ce = 1.602 \times 10^{-19}\text{ C}, determine backwards: (a) the steady electric current II established in the wire, and (b) the intrinsic electrical resistance RR of the wire.

Answer and steps

Final answer

(a) I=0.300 AI = 0.300\text{ A}; (b) R=60.0 ΩR = 60.0\ \Omega

Steps

Part (a): Determine the Steady Electric Current II

  1. Calculate the Total Charge Transferred (ΔQ\Delta Q): Electric current represents the net rate at which electric charge passes through a specified cross-sectional area. The total magnitude of charge ΔQ\Delta Q carried by NN conduction electrons is: ΔQ=N⋅e\Delta Q = N \cdot e

    Substitute the given values: ΔQ=(7.50×1019)⋅(1.602×10−19 C)≈12.015 C\Delta Q = (7.50 \times 10^{19}) \cdot (1.602 \times 10^{-19}\text{ C}) \approx 12.015\text{ C}

  2. Calculate the Electric Current (II): By definition, electric current is the charge transferred per unit time: I=ΔQΔtI = \frac{\Delta Q}{\Delta t}

    Substitute ΔQ\Delta Q and the time interval Δt=40.0 s\Delta t = 40.0\text{ s}: I=12.015 C40.0 s≈0.300375 AI = \frac{12.015\text{ C}}{40.0\text{ s}} \approx 0.300375\text{ A}

    Rounding to three significant figures gives: I=0.300 AI = 0.300\text{ A}


Part (b): Determine the Electrical Resistance RR

  1. Apply Ohm's Law: Ohm's law relates the electric potential difference VV across a conductor to the current II flowing through it and its resistance RR: V=I⋅R  ⟹  R=VIV = I \cdot R \implies R = \frac{V}{I}
  2. Calculate Resistance (RR): Substitute the given voltage V=18.0 VV = 18.0\text{ V} and the calculated current I=0.300 AI = 0.300\text{ A}: R=18.0 V0.300 A=60.0 ΩR = \frac{18.0\text{ V}}{0.300\text{ A}} = 60.0\ \Omega

Pitfalls & Key Conceptual Notes

  • Current vs. Total Charge: Do not confuse the number of electrons NN or total charge ΔQ\Delta Q with current II. Current measures the time rate of charge flow (C/s\text{C/s} or A\text{A}), requiring division by Δt\Delta t.
  • Sign of Charge Carriers: Although electrons carry a negative elementary charge (−e-e), electric current II is conventionally treated as a positive scalar quantity indicating the rate of charge magnitude crossing a boundary.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student multiplies charge by time instead of dividing when computing current, leading to an incorrect current and downstream resistance.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Q=N∗e=(7.50∗1019)∗(1.602∗10−19)=12.015 CQ = N * e = (7.50 * 10^{19}) * (1.602 * 10^{-19}) = 12.015\text{ C}

  2. Step 2

    I=Q∗Δt=12.015∗40.0=480.6 AI = Q * \Delta t = 12.015 * 40.0 = 480.6\text{ A}

    Correct

    I=ΔQΔt=12.015 C40.0 s=0.300 AI = \frac{\Delta Q}{\Delta t} = \frac{12.015\text{ C}}{40.0\text{ s}} = 0.300\text{ A}

    Current is the rate at which charge passes a point per unit time (I=ΔQΔtI = \frac{\Delta Q}{\Delta t}), which requires dividing charge by time rather than multiplying.

  3. Step 3

    R=VI=18.0480.6=0.0375 ΩR = \frac{V}{I} = \frac{18.0}{480.6} = 0.0375\ \Omega

    Correct

    R=VI=18.0 V0.300 A=60.0 ΩR = \frac{V}{I} = \frac{18.0\text{ V}}{0.300\text{ A}} = 60.0\ \Omega

    You applied Ohm's law (R=VIR = \frac{V}{I}) correctly, but substituting the incorrect current value propagated into an incorrect resistance.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the net charge by multiplying the number of electrons by the elementary charge.

You selected the correct Ohm's law relationship between resistance, voltage, and current.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Rate Definition

You wrote I=Q⋅ΔtI = Q \cdot \Delta t instead of dividing charge by time.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the algebraic definition of rate (quantity per unit time, QΔt\frac{Q}{\Delta t}) with total accumulated product (Q=I⋅ΔtQ = I \cdot \Delta t), leading to multiplying the units rather than dividing them.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis of Current
  • One ampere equals one coulomb per second (1 A=1 C/s1\text{ A} = 1\text{ C/s}).

  • Check that your calculation divides charge by seconds so the units match amperes.

Rate vs. Accumulated Amount
  • Current is a flow rate (I=ΔQΔtI = \frac{\Delta Q}{\Delta t}), while charge is the total accumulated quantity (ΔQ=IΔt\Delta Q = I \Delta t).

  • Isolate the target variable first before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the definition of electric current: I=ΔQΔt=12.015 C40.0 s=0.300375 A≈0.300 AI = \frac{\Delta Q}{\Delta t} = \frac{12.015\text{ C}}{40.0\text{ s}} = 0.300375\text{ A} \approx 0.300\text{ A}.

  2. Substitute the corrected current into Ohm's law: R=VI=18.0 V0.300375 A=59.925 Ω≈60.0 ΩR = \frac{V}{I} = \frac{18.0\text{ V}}{0.300375\text{ A}} = 59.925\ \Omega \approx 60.0\ \Omega.

Final answer

(a) I=0.300 AI = 0.300\text{ A}; (b) R=60.0 ΩR = 60.0\ \Omega

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the defining equation of current as I=ΔQΔtI = \frac{\Delta Q}{\Delta t} and check units using 1 A=1 C/s1\text{ A} = 1\text{ C/s}.

  • Practice rearranging the rate formula ΔQ=IΔt\Delta Q = I \Delta t before plugging in numbers.

  • Solve follow-up circuit problems where you must solve for current, time, and charge interchangeably.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to multiply the number of electrons by the elementary charge, taking the particle count N directly as charge Q.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Q=7.50∗1019 CQ = 7.50 * 10^{19}\text{ C}

    Correct

    ΔQ=N⋅e=(7.50×1019)(1.602×10−19 C)≈12.0 C\Delta Q = N \cdot e = (7.50 \times 10^{19})(1.602 \times 10^{-19}\text{ C}) \approx 12.0\text{ C}

    You treated the particle count N=7.50×1019N = 7.50 \times 10^{19} as the total charge in Coulombs. Because each electron carries a fundamental charge magnitude e=1.602×10−19 Ce = 1.602 \times 10^{-19}\text{ C}, you must multiply NN by ee to find ΔQ\Delta Q.

  2. Step 2

    I=QΔt=7.50∗101940.0=1.875∗1018 AI = \frac{Q}{\Delta t} = \frac{7.50 * 10^{19}}{40.0} = 1.875 * 10^{18}\text{ A}

    Correct

    I=ΔQΔt=12.015 C40.0 s=0.300 AI = \frac{\Delta Q}{\Delta t} = \frac{12.015\text{ C}}{40.0\text{ s}} = 0.300\text{ A}

    You correctly applied the definition of current I=QΔtI = \frac{Q}{\Delta t}, but substituting your unscaled value of QQ produced an erroneously large current.

  3. Step 3

    R=VI=18.01.875∗1018=9.60∗10−18 ΩR = \frac{V}{I} = \frac{18.0}{1.875 * 10^{18}} = 9.60 * 10^{-18}\ \Omega

    Correct

    R=VI=18.0 V0.300 A=60.0 ΩR = \frac{V}{I} = \frac{18.0\text{ V}}{0.300\text{ A}} = 60.0\ \Omega

    You correctly applied Ohm's law R=VIR = \frac{V}{I}, but substituting the incorrect current value propagated the error into your final resistance.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the definition of electric current as charge divided by time.

You correctly applied Ohm's law to solve for electrical resistance.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Particle count confused with net charge

You assigned the unit of Coulombs directly to the dimensionless count of electrons NN.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the distinction between the number of carrier particles NN (a dimensionless integer count) and electric charge QQ (a physical quantity measured in Coulombs, quantized as Q=N⋅eQ = N \cdot e).

REASONING PATH
Your ACEpath teacher’s suggested approach
Quantization of Charge
  • Total charge is given by ΔQ=N⋅e\Delta Q = N \cdot e, where e≈1.602×10−19 Ce \approx 1.602 \times 10^{-19}\text{ C}.

  • Always convert a particle count into Coulombs by multiplying by the elementary charge before using it in current equations.

Physical Reality Check
  • Laboratory macroscopic currents are typically between milliamperes (mA\text{mA}) and tens of amperes (A\text{A}).

  • If your computed current is on the order of 1018 A10^{18}\text{ A}, pause and check whether you forgot to scale by 10−19 C10^{-19}\text{ C}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ΔQ=N⋅e=(7.50×1019)(1.602×10−19 C)=12.015 C\Delta Q = N \cdot e = (7.50 \times 10^{19})(1.602 \times 10^{-19}\text{ C}) = 12.015\text{ C}

  2. I=ΔQΔt=12.015 C40.0 s=0.300 AI = \frac{\Delta Q}{\Delta t} = \frac{12.015\text{ C}}{40.0\text{ s}} = 0.300\text{ A}

  3. R=VI=18.0 V0.300 A=60.0 ΩR = \frac{V}{I} = \frac{18.0\text{ V}}{0.300\text{ A}} = 60.0\ \Omega

Final answer

(a) I=0.300 AI = 0.300\text{ A}; (b) R=60.0 ΩR = 60.0\ \Omega

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting given numbers of charge carriers into net charge using Q=N⋅eQ = N \cdot e.

  • Perform order-of-magnitude sense checks on current and resistance values before concluding calculations.

OverviewACEpath Teacher's Diagnosis

03 The student inverts Ohm's law to solve for resistance as R = I / V instead of R = V / I.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Q=N⋅e=(7.50×1019)⋅(1.602×10−19)=12.015 CQ = N \cdot e = (7.50 \times 10^{19}) \cdot (1.602 \times 10^{-19}) = 12.015\text{ C}

  2. Step 2

    I=QΔt=12.01540.0=0.300 AI = \frac{Q}{\Delta t} = \frac{12.015}{40.0} = 0.300\text{ A}

  3. Step 3

    R=IV  ⟹  R=0.30018.0=0.0167 ΩR = \frac{I}{V} \implies R = \frac{0.300}{18.0} = 0.0167\ \Omega

    Correct

    R=VI=18.0 V0.300 A=60.0 ΩR = \frac{V}{I} = \frac{18.0\text{ V}}{0.300\text{ A}} = 60.0\ \Omega

    You inverted Ohm's law. Since V=I⋅RV = I \cdot R, dividing both sides by II yields R=VIR = \frac{V}{I}, not IV\frac{I}{V}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the net charge transported by the conduction electrons using Q=N⋅eQ = N \cdot e.

You correctly applied the definition of electric current I=QΔtI = \frac{Q}{\Delta t} to find I=0.300 AI = 0.300\text{ A}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ohm's Law Inversion

You rearranged Ohm's law as R=IVR = \frac{I}{V} instead of dividing potential difference by current.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused resistance with conductance (G=IVG = \frac{I}{V}) or made an algebraic misstep when isolating RR from the standard form V=I⋅RV = I \cdot R.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate Resistance from Ohm's Law
  • V=I⋅R  ⟺  R=VIV = I \cdot R \iff R = \frac{V}{I}

  • Always begin with the primary relationship V=I⋅RV = I \cdot R and divide both sides by II to isolate RR.

Dimensional & Intuitive Sanity Check
  • 1 Ω=1 V/A1\ \Omega = 1\text{ V}/\text{A}

  • Check your units: resistance is volts per ampere (V/A\text{V}/\text{A}). If voltage is much larger than current, resistance must be greater than 1 Ω1\ \Omega.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State Ohm's law: V=I⋅RV = I \cdot R.

  2. Isolate resistance by dividing both sides by current: R=VIR = \frac{V}{I}.

  3. Substitute V=18.0 VV = 18.0\text{ V} and I=0.300 AI = 0.300\text{ A}: R=18.0 V0.300 A=60.0 ΩR = \frac{18.0\text{ V}}{0.300\text{ A}} = 60.0\ \Omega.

Final answer

(a) I=0.300 AI = 0.300\text{ A}; (b) R=60.0 ΩR = 60.0\ \Omega

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down V=I⋅RV = I \cdot R as your baseline formula before rearranging terms.

  • Verify that your computed resistance has units of volts divided by amperes (V/A\text{V}/\text{A}).

Lock it in

Similar question

01

A steady current of charge flows through a silver wire connected to a 12.0 V12.0\text{ V} battery. In an interval of 25.0 s25.0\text{ s}, a total of 5.00×10195.00\times 10^{19} electrons pass through a cross-section. Taking e=1.60×10−19 Ce = 1.60\times 10^{-19}\text{ C}, calculate: (a) the current II in the wire, and (b) the wire's resistance RR.

Answer

(a) Total charge ΔQ=Ne=(5.00×1019)(1.60×10−19 C)=8.00 C\Delta Q = Ne = (5.00\times 10^{19})(1.60\times 10^{-19}\text{ C}) = 8.00\text{ C}. Current I=ΔQΔt=8.00 C25.0 s=0.320 AI = \frac{\Delta Q}{\Delta t} = \frac{8.00\text{ C}}{25.0\text{ s}} = 0.320\text{ A}. (b) Resistance R=VI=12.0 V0.320 A=37.5 ΩR = \frac{V}{I} = \frac{12.0\text{ V}}{0.320\text{ A}} = 37.5\ \Omega.

02

A heating element has a known resistance of 24.0 Ω24.0\ \Omega and operates under an electric potential difference of 120 V120\text{ V}. (a) Find the current flowing through the heater. (b) How much charge ΔQ\Delta Q passes through the heater in 2.00 minutes2.00\text{ minutes}? (c) How many conduction electrons does this charge correspond to (e=1.602×10−19 Ce = 1.602\times 10^{-19}\text{ C})?

Answer

(a) I=VR=120 V24.0 Ω=5.00 AI = \frac{V}{R} = \frac{120\text{ V}}{24.0\ \Omega} = 5.00\text{ A}. (b) Δt=2.00 min=120 s\Delta t = 2.00\text{ min} = 120\text{ s}; ΔQ=IΔt=(5.00 A)(120 s)=600 C\Delta Q = I \Delta t = (5.00\text{ A})(120\text{ s}) = 600\text{ C}. (c) Number of electrons N=ΔQe=600 C1.602×10−19 C≈3.75×1021N = \frac{\Delta Q}{e} = \frac{600\text{ C}}{1.602\times 10^{-19}\text{ C}} \approx 3.75\times 10^{21} electrons.

03

An unknown cylindrical resistor is connected across an adjustable power supply. When the potential difference is set to V1=9.00 VV_1 = 9.00\text{ V}, a charge of 4.50 C4.50\text{ C} passes through every 15.0 s15.0\text{ s}. If the supply voltage is increased to V2=15.0 VV_2 = 15.0\text{ V} and the wire behaves as an ohmic conductor, how much charge will pass through the resistor in 1.00 minute1.00\text{ minute}?

Answer

Initial current I1=4.50 C15.0 s=0.300 AI_1 = \frac{4.50\text{ C}}{15.0\text{ s}} = 0.300\text{ A}. Resistance R=V1I1=9.00 V0.300 A=30.0 ΩR = \frac{V_1}{I_1} = \frac{9.00\text{ V}}{0.300\text{ A}} = 30.0\ \Omega. At V2=15.0 VV_2 = 15.0\text{ V}, new current I2=15.0 V30.0 Ω=0.500 AI_2 = \frac{15.0\text{ V}}{30.0\ \Omega} = 0.500\text{ A}. In Δt=60.0 s\Delta t = 60.0\text{ s}, total charge transferred is ΔQ=I2Δt=(0.500 A)(60.0 s)=30.0 C\Delta Q = I_2 \Delta t = (0.500\text{ A})(60.0\text{ s}) = 30.0\text{ C}.

Loading workspace…