Resources
Consider the asymptotic behavior of an unloaded, ideal DC motor operating with supply voltage , magnetic field constant (where and motor torque ), and internal armature resistance . In the asymptotic limit as time under zero internal friction and zero external mechanical load torque (): (a) calculate the terminal no-load angular velocity , and (b) determine the limiting values of the steady-state operating current and back-EMF .
Answer and steps
Final answer
(a) (or ); (b) and .
Steps
Limiting Current and Back-EMF as (Part b)
Governing Equations of a DC Motor
An ideal DC motor is governed by two coupled equations representing its electrical circuit and rotational mechanics:
- Armature Circuit (Kirchhoff's Voltage Law): where is the applied source voltage, is the armature current, is the internal resistance, and the induced back-electromotive force (back-EMF) is:
- Rotational Dynamics (Newton's Second Law): where is the moment of inertia and the electromagnetic torque generated by the motor is:
In the asymptotic limit (), the angular velocity reaches a constant terminal value , so the angular acceleration vanishes:
Given that there is no mechanical load () and zero friction (), the net torque required to maintain this constant speed is zero:
Because the motor constant , the steady-state current must be:
Substituting into Kirchhoff's voltage equation:
Common Pitfall: At startup (, ), , yielding a large starting current . However, as the motor spins up, the growing back-EMF opposes the applied voltage, driving the current toward zero when unloaded.
Terminal No-Load Angular Velocity (Part a)
Using the back-EMF relationship :
To express this rotational speed in revolutions per minute ():
Typical errors
01 The student confuses the terminal steady-state condition with stall conditions, assuming the current is determined purely by Ohm's law with zero back-EMF.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You calculated the armature current using only Ohm's law with zero back-EMF (). This applies only at startup ( when ), not at steady state as .
- Step 2Correct
You propagated the incorrect current into torque and then equated to angular velocity (which is dimensionally current, not angular velocity). The terminal angular velocity is set by the maximum back-EMF equal to the supply voltage.
- Step 3Correct
You concluded that the limiting current is and back-EMF is . Under no mechanical load or friction, the motor accelerates until back-EMF matches the source voltage, dropping current to zero.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled the electrical values from the problem statement and calculated the startup/stall current correctly.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the initial stall condition (, , ) with the asymptotic no-load steady-state condition (, , ).
REASONING PATH
Your ACEpath teacher’s suggested approach- No-Load Torque Balance
In the asymptotic limit with zero friction and zero load torque, angular acceleration is zero, so the motor electromagnetic torque must be zero: .
Set to find the steady-state current .
- Back-EMF Loop Equation
Kirchhoff's voltage law for the armature is .
Substitute into KVL to get .
- Terminal Speed from Back-EMF
Back-EMF is proportional to speed: .
Calculate .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the net torque to zero at terminal speed: , which gives .
Apply Kirchhoff's voltage law: , so .
Determine the terminal angular velocity from the back-EMF relation: .
(a) (or ); (b) and
02 The student mistakenly treats the internal resistance as causing a non-zero steady-state voltage drop, calculating the terminal speed from power dissipation formulas or dividing voltage by resistance times k.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
At terminal speed with zero friction and zero external load, the net torque is zero: , which requires . With no current, there is no resistive voltage drop across , so and . Dividing by is both dimensionally inconsistent and physically incorrect.
- Step 2Correct
You applied the back-EMF formula correctly, but your numerical value was affected by your incorrect value for from Step 1.
- Step 3Correct
You correctly applied Ohm's law to the armature circuit, but this non-zero current resulted from the incorrect back-EMF. In reality, a constant non-zero current would generate continuous accelerating torque , violating the steady-state condition .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified and applied the back-EMF definition .
You set up Kirchhoff's voltage law for the armature circuit correctly.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou included the armature resistance in the denominator of the terminal velocity expression.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the internal resistance as causing a persistent voltage drop even when the motor is completely unloaded at steady state, overlooking that rotational equilibrium with zero load torque requires zero electromagnetic torque, and therefore zero steady-state current.
REASONING PATH
Your ACEpath teacher’s suggested approach- Equilibrium Torque Condition
For a spinning motor at constant terminal velocity without load or friction, .
Set first to deduce that .
- Armature Voltage Balance at No-Load
When , the voltage drop across the internal resistance vanishes completely.
Equate directly before solving for .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the net torque to zero at terminal velocity with no load: .
Substitute into Kirchhoff's voltage law: .
Determine the terminal angular velocity from the back-EMF relation: .
(a) ; (b) and
Lock it in
What are the values of back-EMF and armature current for an ideal, unloaded DC motor operating at its terminal steady-state speed?
(supply voltage) and . Since net torque is zero to maintain constant speed without load, current drops to zero, meaning back-EMF fully opposes the source.
Similar question
A permanent-magnet DC motor is connected to a supply. The motor has internal resistance and constant . Assuming negligible friction and no mechanical load, find the terminal angular velocity and the starting current .
Answer
Starting current: At , , so . Terminal speed: At steady state with no load, , so . Therefore, .
A DC motor with , , and drives a constant friction torque of (with no additional external load). In the asymptotic steady state (), calculate: (a) the operating current , (b) the back-EMF , and (c) the steady-state angular velocity .
Answer
(a) At steady state, , so . (b) By Kirchhoff's voltage law, . (c) The angular velocity is .
An unloaded DC motor is powered by a variable supply through an internal resistance . During spin-up, the angular velocity follows . Derive an expression for the instantaneous armature current as a function of time, and verify its values at and .
Answer
The back-EMF is since . From KVL, . At , (maximum stall current). As , (unloaded steady-state current).