Resources

A physics student analyzes a linear position-time graph x(t)x(t) for a test particle where the curve is given by x(t)=Acos⁡(ωt)x(t) = A\cos(\omega t) with A=4.00 mA = 4.00\text{ m} and ω=0.500 rad/s\omega = 0.500\text{ rad/s}. The student incorrectly assumes that whenever the particle's velocity is zero, its acceleration must also be zero, and whenever the particle passes through the origin (x=0 mx = 0\text{ m}), its acceleration must be at a maximum. Evaluate the kinematics at t=0 st = 0\text{ s} and t=πω s≈3.14 st = \frac{\pi}{\omega}\text{ s} \approx 3.14\text{ s}: (a) calculate the velocity and acceleration at t=0 st = 0\text{ s}, and (b) determine the magnitude of the velocity and acceleration as the particle crosses x=0 mx = 0\text{ m} at t=π2ω s≈1.57 st = \frac{\pi}{2\omega}\text{ s} \approx 1.57\text{ s}.

Answer and steps

Final answer

(a) v(0)=0 m/sv(0) = 0\text{ m/s}, a(0)=−1.00 m/s2a(0) = -1.00\text{ m/s}^2; (b) ∣v∣=2.00 m/s|v| = 2.00\text{ m/s}, a=0 m/s2a = 0\text{ m/s}^2

Steps

01

Derive the Kinematic Equations for Position, Velocity, and Acceleration

The position of the particle as a function of time is given by: x(t)=Acos⁡(ωt)x(t) = A\cos(\omega t)

Taking the first time derivative gives the velocity function: v(t)=dxdt=−Aωsin⁡(ωt)v(t) = \frac{dx}{dt} = -A\omega\sin(\omega t)

Taking the second time derivative gives the acceleration function: a(t)=dvdt=−Aω2cos⁡(ωt)=−ω2x(t)a(t) = \frac{dv}{dt} = -A\omega^2\cos(\omega t) = -\omega^2 x(t)

Given the values:

  • Amplitude A=4.00 mA = 4.00\text{ m}
  • Angular frequency ω=0.500 rad/s\omega = 0.500\text{ rad/s}

The peak magnitudes are:

  • Maximum speed: vmax⁡=Aω=(4.00 m)(0.500 rad/s)=2.00 m/sv_{\max} = A\omega = (4.00\text{ m})(0.500\text{ rad/s}) = 2.00\text{ m/s}
  • Maximum acceleration: amax⁡=Aω2=(4.00 m)(0.500 rad/s)2=1.00 m/s2a_{\max} = A\omega^2 = (4.00\text{ m})(0.500\text{ rad/s})^2 = 1.00\text{ m/s}^2

02

Part (a): Evaluate at t=0 st = 0\text{ s}

Substitute t=0 st = 0\text{ s} into the velocity and acceleration functions:

  • Velocity: v(0)=−Aωsin⁡(0)=−(2.00 m/s)(0)=0 m/sv(0) = -A\omega\sin(0) = -(2.00\text{ m/s})(0) = 0\text{ m/s}
  • Acceleration: a(0)=−Aω2cos⁡(0)=−(1.00 m/s2)(1)=−1.00 m/s2a(0) = -A\omega^2\cos(0) = -(1.00\text{ m/s}^2)(1) = -1.00\text{ m/s}^2

Pitfall to avoid: A common misconception is assuming that when velocity is zero, acceleration must also be zero. At the turning point (t=0 st = 0\text{ s}), the particle instantaneously stops as it reverses direction, meaning its velocity is zero while its acceleration is at its maximum magnitude directed toward the center.


03

Part (b): Evaluate when the Particle Crosses the Origin (x=0 mx = 0\text{ m})

The particle crosses the equilibrium position x=0 mx = 0\text{ m} when the cosine argument is ωt=π2 rad\omega t = \frac{\pi}{2}\text{ rad}:

  • Velocity: v(π2ω)=−Aωsin⁡(π2)=−2.00(1)=−2.00 m/sv\left(\frac{\pi}{2\omega}\right) = -A\omega\sin\left(\frac{\pi}{2}\right) = -2.00(1) = -2.00\text{ m/s} Taking the magnitude: ∣v∣=2.00 m/s|v| = 2.00\text{ m/s}
  • Acceleration: a(π2ω)=−ω2x=−ω2(0)=0 m/s2a\left(\frac{\pi}{2\omega}\right) = -\omega^2 x = -\omega^2(0) = 0\text{ m/s}^2

Pitfall to avoid: Another common misconception is assuming acceleration is greatest at the center because the particle is moving fastest. Since acceleration is directly proportional to displacement (a=−ω2xa = -\omega^2 x), the acceleration is precisely zero at the origin (x=0 mx = 0\text{ m}), even though the speed is at its maximum.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student adopts the misconception stated in the prompt that acceleration must be zero whenever velocity is zero and maximum at the origin, setting a = 0 m/s² at t = 0 s and a = 1.00 m/s² at x = 0 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(t)=−Aωsin⁡(ωt)  ⟹  v(0)=−(4.00)(0.500)sin⁡(0)=0 m/sv(t) = -A\omega\sin(\omega t) \implies v(0) = -(4.00)(0.500)\sin(0) = 0\text{ m/s}

  2. Step 2

    Since velocity is zero at \text{Since velocity is zero at } t = 0 s\text{ s}, acceleration must be zero: \text{acceleration must be zero: } a(0) = 0 m/s\text{ m/s}^2

    Correct

    a(t)=−Aω2cos⁡(ωt)  ⟹  a(0)=−(4.00)(0.500)2cos⁡(0)=−1.00 m/s2a(t) = -A\omega^2\cos(\omega t) \implies a(0) = -(4.00)(0.500)^2\cos(0) = -1.00\text{ m/s}^2

    At a turning point where velocity is zero, acceleration is actually at its peak magnitude because the particle is changing direction. Differentiating v(t)v(t) yields a(0)=−1.00 m/s2a(0) = -1.00\text{ m/s}^2.

  3. Step 3

    At \text{At } t = 1.57 s\text{ s}, ω\omega t = π2\frac{\pi}{2}   ⟹  \implies v = -(4.00)(0.500)\sin(π2)\left(\frac{\pi}{2}\right) = -2.00 m/s\text{ m/s},  so \text{ so } |v| = 2.00 m/s\text{ m/s}

  4. Step 4

    At \text{At } x = 0 m, acceleration is at maximum: \text{ m, acceleration is at maximum: } |a| = Aω\omega^2 = (4.00)(0.500)^2 = 1.00 m/s\text{ m/s}^2

    Correct

    a=−ω2x=−ω2(0)=0 m/s2a = -\omega^2 x = -\omega^2(0) = 0\text{ m/s}^2

    In simple harmonic motion, acceleration is proportional to displacement (a=−ω2xa = -\omega^2 x). When the particle passes through the origin (x=0 mx = 0\text{ m}), the restoring force and acceleration are both zero.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly differentiated the position function to find the velocity expression v(t)=−Aωsin⁡(ωt)v(t) = -A\omega\sin(\omega t).

You evaluated the velocity accurately at t=0 st = 0\text{ s} and determined the correct velocity magnitude at t=1.57 st = 1.57\text{ s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematic Misconception in Simple Harmonic Motion
WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that acceleration and velocity must share the same extrema and zeros. In harmonic motion, position and acceleration are in phase (opposite sign), whereas velocity is 90∘90^\circ out of phase: when velocity is zero at the extremes, acceleration is at its maximum, and when speed is maximized at x=0 mx = 0\text{ m}, acceleration is zero.

REASONING PATH
Your ACEpath teacher’s suggested approach
Acceleration as a Function of Position
  • In simple harmonic motion, a(t)=−ω2x(t)a(t) = -\omega^2 x(t).

  • Whenever evaluating acceleration at a given position xx, substitute xx directly into a=−ω2xa = -\omega^2 x rather than guessing based on velocity.

Turning Points vs. Equilibrium
  • At turning points (x=±Ax = \pm A), v=0v = 0 while ∣a∣=amax⁡=Aω2|a| = a_{\max} = A\omega^2. At equilibrium (x=0x = 0), ∣v∣=vmax⁡=Aω|v| = v_{\max} = A\omega while a=0a = 0.

  • Remember that the net restoring force is zero at the center and greatest at the extremes.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate velocity to find acceleration: a(t)=dvdt=−Aω2cos⁡(ωt)=−ω2x(t)a(t) = \frac{dv}{dt} = -A\omega^2\cos(\omega t) = -\omega^2 x(t).

  2. Evaluate acceleration at t=0 st = 0\text{ s}: a(0)=−(4.00 m)(0.500 rad/s)2cos⁡(0)=−1.00 m/s2a(0) = -(4.00\text{ m})(0.500\text{ rad/s})^2\cos(0) = -1.00\text{ m/s}^2.

  3. Evaluate acceleration at x=0 mx = 0\text{ m}: a=−(0.500 rad/s)2(0 m)=0 m/s2a = -(0.500\text{ rad/s})^2(0\text{ m}) = 0\text{ m/s}^2.

Final answer

(a) v(0)=0 m/sv(0) = 0\text{ m/s}, a(0)=−1.00 m/s2a(0) = -1.00\text{ m/s}^2; (b) ∣v∣=2.00 m/s|v| = 2.00\text{ m/s}, a=0 m/s2a = 0\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch x(t)x(t), v(t)v(t), and a(t)a(t) stacked vertically to visualize that the zeros of v(t)v(t) align with the peaks of a(t)a(t).

  • Practice calculating acceleration using the differential equation definition a=−ω2xa = -\omega^2 x for any simple harmonic oscillator.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to apply the chain rule when differentiating with respect to time, omitting the factor of ω in both velocity and acceleration expressions.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v(t)=dxdt=−Asin⁡(ωt)  ⟹  v(0)=−4.00sin⁡(0)=0 m/sv(t) = \frac{dx}{dt} = -A\sin(\omega t) \implies v(0) = -4.00\sin(0) = 0\text{ m/s}

    Correct

    v(t)=dxdt=−Aωsin⁡(ωt)  ⟹  v(0)=−(4.00)(0.500)sin⁡(0)=0 m/sv(t) = \frac{dx}{dt} = -A\omega\sin(\omega t) \implies v(0) = -(4.00)(0.500)\sin(0) = 0\text{ m/s}

    You differentiated cos⁡(ωt)\cos(\omega t) without applying the chain rule to multiply by ddt(ωt)=ω\frac{d}{dt}(\omega t) = \omega. While v(0)=0 m/sv(0) = 0\text{ m/s} is numerically correct because sin⁡(0)=0\sin(0) = 0, the general velocity formula is missing the angular frequency factor ω\omega.

  2. Step 2

    a(t)=dvdt=−Acos⁡(ωt)  ⟹  a(0)=−4.00cos⁡(0)=−4.00 m/s2a(t) = \frac{dv}{dt} = -A\cos(\omega t) \implies a(0) = -4.00\cos(0) = -4.00\text{ m/s}^2

    Correct

    a(t)=dvdt=−Aω2cos⁡(ωt)  ⟹  a(0)=−(4.00)(0.500)2cos⁡(0)=−1.00 m/s2a(t) = \frac{dv}{dt} = -A\omega^2\cos(\omega t) \implies a(0) = -(4.00)(0.500)^2\cos(0) = -1.00\text{ m/s}^2

    You differentiated again without including the inner derivative factor ω\omega. Differentiating v(t)=−Aωsin⁡(ωt)v(t) = -A\omega\sin(\omega t) with respect to time requires another factor of ω\omega, yielding an amplitude of Aω2=1.00 m/s2A\omega^2 = 1.00\text{ m/s}^2 rather than 4.00 m/s24.00\text{ m/s}^2.

  3. Step 3

    At t=1.57 s,ωt=π2  ⟹  v(1.57)=−4.00sin⁡(π2)=−4.00 m/s  ⟹  ∣v∣=4.00 m/s\text{At } t = 1.57\text{ s}, \omega t = \frac{\pi}{2} \implies v(1.57) = -4.00\sin\left(\frac{\pi}{2}\right) = -4.00\text{ m/s} \implies |v| = 4.00\text{ m/s}

    Correct

    v(1.57)=−Aωsin⁡(π2)=−(4.00)(0.500)(1)=−2.00 m/s  ⟹  ∣v∣=2.00 m/sv(1.57) = -A\omega\sin\left(\frac{\pi}{2}\right) = -(4.00)(0.500)(1) = -2.00\text{ m/s} \implies |v| = 2.00\text{ m/s}

    You correctly determined that ωt=π2\omega t = \frac{\pi}{2} and correctly evaluated sin⁡(π2)=1\sin\left(\frac{\pi}{2}\right) = 1, but using the unscaled velocity expression from Step 1 doubled the magnitude of the velocity.

  4. Step 4

    a(1.57)=−4.00cos⁡(π2)=0 m/s2  ⟹  ∣a∣=0 m/s2a(1.57) = -4.00\cos\left(\frac{\pi}{2}\right) = 0\text{ m/s}^2 \implies |a| = 0\text{ m/s}^2

    Correct

    a(1.57)=−Aω2cos⁡(π2)=−(1.00)(0)=0 m/s2a(1.57) = -A\omega^2\cos\left(\frac{\pi}{2}\right) = -(1.00)(0) = 0\text{ m/s}^2

    Your result is numerically correct because cos⁡(π2)=0\cos\left(\frac{\pi}{2}\right) = 0, but the expression still carried the unscaled amplitude coefficient from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related kinematics by defining velocity as the first time derivative of position and acceleration as the derivative of velocity.

You evaluated trigonometric values accurately at both t=0 st = 0\text{ s} and t=1.57 st = 1.57\text{ s}.

You correctly concluded that the acceleration is zero when the particle crosses the origin.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Chain Rule Factor

You treated ωt\omega t as an isolated variable rather than an inner function u(t)=ωtu(t) = \omega t that produces a factor of ω\omega upon differentiation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Forgetting the chain rule when taking time derivatives of sinusoidal functions cos⁡(ωt)\cos(\omega t) and sin⁡(ωt)\sin(\omega t), leading to missing multipliers of ω\omega and ω2\omega^2 in the peak velocity and acceleration amplitudes.

REASONING PATH
Your ACEpath teacher’s suggested approach
Apply the Chain Rule to Oscillations
  • ddtcos⁡(ωt)=−ωsin⁡(ωt)\frac{d}{dt}\cos(\omega t) = -\omega\sin(\omega t) and ddtsin⁡(ωt)=ωcos⁡(ωt)\frac{d}{dt}\sin(\omega t) = \omega\cos(\omega t)

  • Always multiply by the derivative of the inside argument ddt(ωt)=ω\frac{d}{dt}(\omega t) = \omega every time you differentiate with respect to time.

Check Peak Dimensions and Units
  • [vmax⁡]=[Aω]=m⋅s−1[v_{\max}] = [A\omega] = \text{m}\cdot\text{s}^{-1} and [amax⁡]=[Aω2]=m⋅s−2[a_{\max}] = [A\omega^2] = \text{m}\cdot\text{s}^{-2}

  • Verify that your maximum velocity and acceleration expressions contain the appropriate powers of ω\omega to match the SI units of speed and acceleration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate x(t)=Acos⁡(ωt)x(t) = A\cos(\omega t) with respect to tt using the chain rule: v(t)=−Aωsin⁡(ωt)v(t) = -A\omega\sin(\omega t).

  2. Substitute A=4.00 mA = 4.00\text{ m} and ω=0.500 rad/s\omega = 0.500\text{ rad/s}: v(t)=−(4.00)(0.500)sin⁡(0.500t)=−2.00sin⁡(0.500t)v(t) = -(4.00)(0.500)\sin(0.500t) = -2.00\sin(0.500t).

  3. At t=0 st = 0\text{ s}, v(0)=−2.00sin⁡(0)=0 m/sv(0) = -2.00\sin(0) = 0\text{ m/s}.

  4. Differentiate v(t)v(t) to find acceleration: a(t)=dvdt=−Aω2cos⁡(ωt)=−1.00cos⁡(0.500t)a(t) = \frac{dv}{dt} = -A\omega^2\cos(\omega t) = -1.00\cos(0.500t).

  5. At t=0 st = 0\text{ s}, a(0)=−1.00cos⁡(0)=−1.00 m/s2a(0) = -1.00\cos(0) = -1.00\text{ m/s}^2.

  6. At t=1.57 s≈π2ω st = 1.57\text{ s} \approx \frac{\pi}{2\omega}\text{ s}, evaluate velocity: v(1.57)=−2.00sin⁡(π2)=−2.00 m/s  ⟹  ∣v∣=2.00 m/sv(1.57) = -2.00\sin\left(\frac{\pi}{2}\right) = -2.00\text{ m/s} \implies |v| = 2.00\text{ m/s}.

  7. At t=1.57 st = 1.57\text{ s}, evaluate acceleration: a(1.57)=−1.00cos⁡(π2)=0 m/s2a(1.57) = -1.00\cos\left(\frac{\pi}{2}\right) = 0\text{ m/s}^2.

Final answer

(a) v(0)=0 m/sv(0) = 0\text{ m/s}, a(0)=−1.00 m/s2a(0) = -1.00\text{ m/s}^2; (b) ∣v∣=2.00 m/s|v| = 2.00\text{ m/s}, a=0 m/s2a = 0\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice using the chain rule explicitly by defining u=ωtu = \omega t before taking derivatives of sinusoidal kinematic functions.

  • Perform a dimensional check on peak amplitude values (vmax⁡=Aωv_{\max} = A\omega, amax⁡=Aω2a_{\max} = A\omega^2) before plugging in numbers.

  • Work through problems where ω≠1\omega \neq 1 to build the reflex of carrying angular frequency out front.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to square the angular frequency ω when calculating acceleration from position, using a = -Aω cos(ωt) instead of -Aω² cos(ωt).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(t)=−Aωsin⁡(ωt)  ⟹  v(0)=−(4.00)(0.500)sin⁡(0)=0 m/sv(t) = -A\omega\sin(\omega t) \implies v(0) = -(4.00)(0.500)\sin(0) = 0\text{ m/s}

  2. Step 2

    a(t)=−Aωcos⁡(ωt)  ⟹  a(0)=−(4.00)(0.500)cos⁡(0)=−2.00 m/s2a(t) = -A\omega\cos(\omega t) \implies a(0) = -(4.00)(0.500)\cos(0) = -2.00\text{ m/s}^2

    Correct

    a(t)=dvdt=−Aω2cos⁡(ωt)  ⟹  a(0)=−(4.00)(0.500)2(1)=−1.00 m/s2a(t) = \frac{dv}{dt} = -A\omega^2\cos(\omega t) \implies a(0) = -(4.00)(0.500)^2(1) = -1.00\text{ m/s}^2

    When differentiating v(t)=−Aωsin⁡(ωt)v(t) = -A\omega\sin(\omega t), applying the chain rule to the inside argument ωt\omega t produces an additional factor of ω\omega, giving −ω2-\omega^2 rather than −ω-\omega.

  3. Step 3

    v(1.57)=−(4.00)(0.500)sin⁡(π/2)=−2.00 m/s  ⟹  ∣v∣=2.00 m/sv(1.57) = -(4.00)(0.500)\sin(\pi/2) = -2.00\text{ m/s} \implies |v| = 2.00\text{ m/s}

  4. Step 4

    a(1.57)=−(4.00)(0.500)cos⁡(π/2)=0 m/s2  ⟹  ∣a∣=0 m/s2a(1.57) = -(4.00)(0.500)\cos(\pi/2) = 0\text{ m/s}^2 \implies |a| = 0\text{ m/s}^2

    Correct

    a(π/(2ω))=−Aω2cos⁡(π/2)=0 m/s2  ⟹  ∣a∣=0 m/s2a(\pi/(2\omega)) = -A\omega^2\cos(\pi/2) = 0\text{ m/s}^2 \implies |a| = 0\text{ m/s}^2

    Your numerical answer of 0 m/s20\text{ m/s}^2 is correct because cos⁡(π/2)=0\cos(\pi/2) = 0, but the step relied on the incomplete formula a(t)=−Aωcos⁡(ωt)a(t) = -A\omega\cos(\omega t).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly found the velocity function using the chain rule on x(t)=Acos⁡(ωt)x(t) = A\cos(\omega t).

You correctly substituted the time values into your trigonometric functions.

You accurately identified that the particle is at equilibrium when ωt=π2\omega t = \frac{\pi}{2}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of inner derivative factor (Chain Rule)

You omitted the second factor of ω\omega when taking the derivative of sin⁡(ωt)\sin(\omega t), writing a(t)=−Aωcos⁡(ωt)a(t) = -A\omega\cos(\omega t) instead of a(t)=−Aω2cos⁡(ωt)a(t) = -A\omega^2\cos(\omega t).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In simple harmonic motion kinematics, each successive time derivative multiplies the amplitude by another factor of the angular frequency ω\omega due to ddt(ωt)=ω\frac{d}{dt}(\omega t) = \omega. Forgetting this leads to incorrect dimensions ([m/s][\text{m/s}] instead of [m/s2][\text{m/s}^2]) and an acceleration that is off by a factor of ω\omega.

REASONING PATH
Your ACEpath teacher’s suggested approach
Chain Rule for Angular Arguments
  • ddtsin⁡(ωt)=ωcos⁡(ωt)\frac{d}{dt}\sin(\omega t) = \omega\cos(\omega t) and ddtcos⁡(ωt)=−ωsin⁡(ωt)\frac{d}{dt}\cos(\omega t) = -\omega\sin(\omega t)

  • Always multiply by the inner derivative ω\omega every time you differentiate with respect to time tt.

Dimensional Consistency Check
  • Acceleration must carry SI units of m/s2\text{m/s}^2.

  • Check that Aω2A\omega^2 has units of (m)⋅(rad/s)2=m/s2(\text{m})\cdot(\text{rad/s})^2 = \text{m/s}^2. Notice that AωA\omega only gives velocity units (m/s\text{m/s}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate velocity with the chain rule: a(t)=ddt[−Aωsin⁡(ωt)]=−Aω2cos⁡(ωt)a(t) = \frac{d}{dt}[-A\omega\sin(\omega t)] = -A\omega^2\cos(\omega t).

  2. Substitute the given parameters: amax⁡=Aω2=(4.00 m)(0.500 rad/s)2=1.00 m/s2a_{\max} = A\omega^2 = (4.00\text{ m})(0.500\text{ rad/s})^2 = 1.00\text{ m/s}^2.

  3. Evaluate at t=0 st = 0\text{ s}: a(0)=−(1.00 m/s2)cos⁡(0)=−1.00 m/s2a(0) = -(1.00\text{ m/s}^2)\cos(0) = -1.00\text{ m/s}^2.

Final answer

(a) v(0)=0 m/sv(0) = 0\text{ m/s}, a(0)=−1.00 m/s2a(0) = -1.00\text{ m/s}^2; (b) ∣v∣=2.00 m/s|v| = 2.00\text{ m/s}, ∣a∣=0 m/s2|a| = 0\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice taking double derivatives of sinusoidal functions like x(t)=Bsin⁡(kt)x(t) = B\sin(kt) to build muscle memory for the chain factor k2k^2.

  • Check units before calculating numbers: verify that maximum acceleration has the formula amax⁡=Aω2a_{\max} = A\omega^2 rather than AωA\omega.

Lock it in

Similar question

01

A particle moves along the xx-axis according to x(t)=(3.00 m)sin⁡(2.00t)x(t) = (3.00\text{ m})\sin(2.00 t). Find the velocity and acceleration of the particle at t=0 st = 0\text{ s}.

Answer

v(0)=6.00 m/sv(0) = 6.00\text{ m/s} and a(0)=0 m/s2a(0) = 0\text{ m/s}^2. Differentiating gives v(t)=6.00cos⁡(2t)v(t) = 6.00\cos(2t) and a(t)=−12.0sin⁡(2t)a(t) = -12.0\sin(2t). At t=0t = 0, cos⁡(0)=1\cos(0) = 1 and sin⁡(0)=0\sin(0) = 0.

02

An oscillator has position x(t)=(0.50 m)cos⁡(4.0πt)x(t) = (0.50\text{ m})\cos(4.0\pi t). Determine the particle's speed and the magnitude of its acceleration at x=−0.50 mx = -0.50\text{ m}.

Answer

Speed =0 m/s= 0\text{ m/s} and ∣a∣=8.0π2 m/s2≈79 m/s2|a| = 8.0\pi^2\text{ m/s}^2 \approx 79\text{ m/s}^2. The point x=−0.50 mx = -0.50\text{ m} is an amplitude turning point where velocity is zero and acceleration magnitude is ∣a∣=ω2∣x∣=(4π)2(0.50)=8π2 m/s2|a| = \omega^2 |x| = (4\pi)^2(0.50) = 8\pi^2\text{ m/s}^2.

03

A mass attached to a horizontal spring oscillates between x=−0.20 mx = -0.20\text{ m} and x=+0.20 mx = +0.20\text{ m} with period T=2.0 sT = 2.0\text{ s}. At what position(s) is the magnitude of the net force (and thus acceleration) on the mass minimized, and what is its speed at that location?

Answer

Minimized at x=0 mx = 0\text{ m}; speed is vmax⁡=0.63 m/sv_{\max} = 0.63\text{ m/s}. Since Fnet=−kx=maF_{\text{net}} = -kx = ma, acceleration is zero when x=0 mx = 0\text{ m}. With ω=2πT=π rad/s\omega = \frac{2\pi}{T} = \pi\text{ rad/s}, the maximum speed is vmax⁡=Aω=(0.20)(π)≈0.63 m/sv_{\max} = A\omega = (0.20)(\pi) \approx 0.63\text{ m/s}.

Loading workspace…