Resources

An organ pipe of length L=0.850 mL = 0.850\text{ m} is open at one end and closed at the other, filled with dry air at 22.0∘C22.0^\circ\text{C} where the sound speed is v=344.6 m/sv = 344.6\text{ m/s}. The maximum displacement amplitude of air molecules before turbulence sets in at the open mouth is smax⁡=1.20×10−5 ms_{\max} = 1.20\times 10^{-5}\text{ m}. Given that the pressure variation amplitude is ΔPmax⁡=ρvωsmax⁡\Delta P_{\max} = \rho v \omega s_{\max} with equilibrium air density ρ=1.196 kg/m3\rho = 1.196\text{ kg/m}^3: (a) Calculate the fundamental resonance frequency f1f_1 of the pipe. (b) Calculate the angular frequency ω1\omega_1 and the resulting maximum acoustic pressure amplitude ΔPmax⁡\Delta P_{\max} at the closed boundary for this fundamental mode.

Answer and steps

Final answer

(a) f1=101 Hzf_1 = 101\text{ Hz}; (b) ω1=637 rad/s\omega_1 = 637\text{ rad/s}, ΔPmax⁡=3.15 Pa\Delta P_{\max} = 3.15\text{ Pa}.

Steps

Part (a): Calculating the Fundamental Resonance Frequency

  1. Identify the boundary conditions for the pipe: For a pipe closed at one end and open at the other, air molecules cannot oscillate against the rigid closed wall, creating a displacement node (s=0s = 0) at the closed end. At the open end, air is free to oscillate with maximum amplitude, forming a displacement antinode (s=smax⁡s = s_{\max}).
  2. Relate pipe length to wavelength for the fundamental mode (n=1n = 1): The distance between adjacent displacement nodes and antinodes is one-quarter of a wavelength: L=λ14  ⟹  λ1=4LL = \frac{\lambda_1}{4} \implies \lambda_1 = 4L

    Substitute L=0.850 mL = 0.850\text{ m}: λ1=4(0.850 m)=3.40 m\lambda_1 = 4(0.850\text{ m}) = 3.40\text{ m}

  3. Calculate the fundamental frequency (f1f_1): Using the wave speed relationship v=f1λ1v = f_1 \lambda_1: f1=v4L=344.6 m/s3.40 m≈101.35 Hz≈101 Hzf_1 = \frac{v}{4L} = \frac{344.6\text{ m/s}}{3.40\text{ m}} \approx 101.35\text{ Hz} \approx 101\text{ Hz}

Part (b): Calculating the Angular Frequency and Pressure Amplitude

  1. Calculate the angular frequency (ω1\omega_1): The angular frequency is related to the linear frequency by ω1=2πf1\omega_1 = 2\pi f_1: ω1=2π(101.35 s−1)≈636.8 rad/s≈637 rad/s\omega_1 = 2\pi (101.35\text{ s}^{-1}) \approx 636.8\text{ rad/s} \approx 637\text{ rad/s}
  2. Calculate the maximum acoustic pressure amplitude (ΔPmax⁡\Delta P_{\max}): Because displacement and pressure in a standing wave are 90∘90^\circ out of phase spatially:

    • A displacement node at the closed end corresponds to a pressure antinode, where the acoustic pressure variation amplitude reaches its peak value.
    • Using the given relation ΔPmax⁡=ρvω1smax⁡\Delta P_{\max} = \rho v \omega_1 s_{\max}: ΔPmax⁡=(1.196 kg/m3)(344.6 m/s)(636.8 rad/s)(1.20×10−5 m)\Delta P_{\max} = (1.196\text{ kg/m}^3)(344.6\text{ m/s})(636.8\text{ rad/s})(1.20\times 10^{-5}\text{ m})
  3. Compute the numerical result: ρv=(1.196)(344.6)≈412.14 kg/(m2⋅s)\rho v = (1.196)(344.6) \approx 412.14\text{ kg/(m}^2\cdot\text{s)} ΔPmax⁡=412.14×636.8×1.20×10−5≈3.15 Pa\Delta P_{\max} = 412.14 \times 636.8 \times 1.20\times 10^{-5} \approx 3.15\text{ Pa}

Common Pitfall: Confusing displacement nodes and pressure nodes. At the closed end of a tube, particles cannot move (displacement node), which causes maximum compression and rarefaction of air particles against the wall (pressure antinode). Therefore, the maximum pressure fluctuation ΔPmax⁡\Delta P_{\max} occurs precisely at the closed end.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misremembers the pipe boundary condition and uses λ₁ = 2L for a pipe open at both ends, doubling the fundamental frequency and the resulting pressure amplitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    λ1=2L=2×0.850=1.70 m\lambda_1 = 2L = 2 \times 0.850 = 1.70\text{ m}

    Correct

    λ1=4L=4×0.850 m=3.40 m\lambda_1 = 4L = 4 \times 0.850\text{ m} = 3.40\text{ m}

    An organ pipe closed at one end and open at the other must have a displacement node at the closed end and a displacement antinode at the open end. For the fundamental mode, the pipe length equals one-quarter of a wavelength (L=λ14L = \frac{\lambda_1}{4}), which means λ1=4L\lambda_1 = 4L, not 2L2L.

  2. Step 2

    f1=vλ1=344.61.70=202.7 Hzf_1 = \frac{v}{\lambda_1} = \frac{344.6}{1.70} = 202.7\text{ Hz}

    Correct

    f1=vλ1=344.6 m/s3.40 m≈101.4 Hz≈101 Hzf_1 = \frac{v}{\lambda_1} = \frac{344.6\text{ m/s}}{3.40\text{ m}} \approx 101.4\text{ Hz} \approx 101\text{ Hz}

    Your wave-speed equation is correct, but your frequency value is doubled due to substituting the incorrect wavelength from Step 1.

  3. Step 3

    ω1=2πf1=2π×202.7=1273.6 rad/s\omega_1 = 2\pi f_1 = 2\pi \times 202.7 = 1273.6\text{ rad/s}

    Correct

    ω1=2πf1=2π×101.35 s−1≈637 rad/s\omega_1 = 2\pi f_1 = 2\pi \times 101.35\text{ s}^{-1} \approx 637\text{ rad/s}

    You correctly related angular frequency to linear frequency using ω=2πf\omega = 2\pi f, but the numerical value inherits the error from Step 2.

  4. Step 4

    ΔPmax⁡=ρvω1smax⁡=1.196×344.6×1273.6×1.20×10−5=6.30 Pa\Delta P_{\max} = \rho v \omega_1 s_{\max} = 1.196 \times 344.6 \times 1273.6 \times 1.20 \times 10^{-5} = 6.30\text{ Pa}

    Correct

    ΔPmax⁡=ρvω1smax⁡=1.196×344.6×636.8×1.20×10−5 Pa≈3.15 Pa\Delta P_{\max} = \rho v \omega_1 s_{\max} = 1.196 \times 344.6 \times 636.8 \times 1.20 \times 10^{-5}\text{ Pa} \approx 3.15\text{ Pa}

    You correctly carried out the substitution into the acoustic pressure formula, but the result is twice the true value because ω1\omega_1 was doubled.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the wave relation v=fλv = f\lambda to solve for frequency.

You correctly related linear frequency to angular frequency via ω=2πf\omega = 2\pi f.

You correctly substituted the physical constants and variables into the formula for acoustic pressure amplitude ΔPmax⁡=ρvωsmax⁡\Delta P_{\max} = \rho v \omega s_{\max}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Boundary condition mismatch (open-closed pipe vs. symmetric pipe)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed the fundamental wavelength of the pipe is λ1=2L\lambda_1 = 2L, which is only valid for pipes with identical boundary conditions at both ends (open-open or closed-closed). A pipe with mixed boundary conditions (one closed end and one open end) requires a displacement node at the closed end and an antinode at the open end, spanning one-quarter of a wavelength (L=λ1/4L = \lambda_1 / 4).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify End Conditions
  • Pipes open at both ends (or closed at both ends) have λ1=2L\lambda_1 = 2L. Pipes closed at one end and open at the other have λ1=4L\lambda_1 = 4L.

  • Before writing down λ\lambda, sketch the tube and identify whether each end is a displacement node (rigid wall) or antinode (open mouth).

Count Quarter-Wavelengths
  • The distance between adjacent displacement nodes and antinodes is always λ4\frac{\lambda}{4}.

  • Count how many λ4\frac{\lambda}{4} segments fit inside length LL for the specified harmonic.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. λ1=4L=4(0.850 m)=3.40 m\lambda_1 = 4L = 4(0.850\text{ m}) = 3.40\text{ m}

  2. f1=vλ1=344.6 m/s3.40 m≈101.35 Hz≈101 Hzf_1 = \frac{v}{\lambda_1} = \frac{344.6\text{ m/s}}{3.40\text{ m}} \approx 101.35\text{ Hz} \approx 101\text{ Hz}

  3. ω1=2πf1=2π(101.35 s−1)≈636.8 rad/s≈637 rad/s\omega_1 = 2\pi f_1 = 2\pi(101.35\text{ s}^{-1}) \approx 636.8\text{ rad/s} \approx 637\text{ rad/s}

  4. ΔPmax⁡=ρvω1smax⁡=(1.196 kg/m3)(344.6 m/s)(636.8 rad/s)(1.20×10−5 m)≈3.15 Pa\Delta P_{\max} = \rho v \omega_1 s_{\max} = (1.196\text{ kg/m}^3)(344.6\text{ m/s})(636.8\text{ rad/s})(1.20\times 10^{-5}\text{ m}) \approx 3.15\text{ Pa}

Final answer

(a) f1=101 Hzf_1 = 101\text{ Hz}; (b) ω1=637 rad/s\omega_1 = 637\text{ rad/s}, ΔPmax⁡=3.15 Pa\Delta P_{\max} = 3.15\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the displacement waveform inside the pipe for any standing wave problem to visually verify how many quarter-wavelengths span the tube length.

  • Remember that open-closed pipes support only odd harmonics (fn=nv4Lf_n = n \frac{v}{4L} for n=1,3,5,…n = 1, 3, 5, \dots).

  • Practice distinguishing displacement boundary conditions (node at closed wall, antinode at open end) from pressure boundary conditions (antinode at closed wall, node at open end).

OverviewACEpath Teacher's Diagnosis

02 The student confuses angular frequency with ordinary frequency and directly substitutes f₁ instead of ω₁ into the pressure amplitude formula, underestimating ΔP_max by a factor of 2π.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ1=4L=4×0.850=3.40 m  ⟹  f1=vλ1=344.63.40=101.4 Hz\lambda_1 = 4L = 4 \times 0.850 = 3.40\text{ m} \implies f_1 = \frac{v}{\lambda_1} = \frac{344.6}{3.40} = 101.4\text{ Hz}

  2. Step 2

    ω1=2πf1=2π×101.4=637.1 rad/s\omega_1 = 2\pi f_1 = 2\pi \times 101.4 = 637.1\text{ rad/s}

  3. Step 3

    ΔPmax⁡=ρvf1smax⁡  ⟹  ΔPmax⁡=1.196×344.6×101.4×1.20×10−5=0.50 Pa\Delta P_{\max} = \rho v f_1 s_{\max} \implies \Delta P_{\max} = 1.196 \times 344.6 \times 101.4 \times 1.20 \times 10^{-5} = 0.50\text{ Pa}

    Correct

    ΔPmax⁡=ρvω1smax⁡=(1.196 kg/m3)(344.6 m/s)(636.8 rad/s)(1.20×10−5 m)≈3.15 Pa\Delta P_{\max} = \rho v \omega_1 s_{\max} = (1.196\text{ kg/m}^3)(344.6\text{ m/s})(636.8\text{ rad/s})(1.20 \times 10^{-5}\text{ m}) \approx 3.15\text{ Pa}

    You substituted the ordinary frequency f1f_1 into the pressure amplitude equation instead of the angular frequency ω1\omega_1, which underestimated the final pressure amplitude by a factor of 2π2\pi.

WHAT YOU DID WELL
Compliments from Your Teacher

You identified the correct fundamental standing wave relation λ1=4L\lambda_1 = 4L for a closed-open pipe.

You accurately calculated both the linear frequency f1f_1 and the angular frequency ω1\omega_1.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Frequency vs. Angular Frequency Confusion

You correctly calculated ω1=637.1 rad/s\omega_1 = 637.1\text{ rad/s} in the previous line, but wrote f1f_1 when copying the formula for ΔPmax⁡\Delta P_{\max}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing cyclic frequency ff (measured in Hz\text{Hz} or s−1\text{s}^{-1}) with angular frequency ω\omega (measured in rad/s\text{rad/s}) in acoustic wave amplitude relations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Acoustic Pressure Amplitude Equation
  • The maximum pressure variation amplitude in a sound wave is ΔPmax⁡=Bksmax⁡=ρvωsmax⁡\Delta P_{\max} = B k s_{\max} = \rho v \omega s_{\max}, where ω\omega is angular frequency in rad/s\text{rad/s}.

  • Always verify that formulas containing wave speed vv and displacement amplitude smax⁡s_{\max} use angular frequency ω=2πf\omega = 2\pi f, not ordinary frequency ff.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the pressure variation amplitude relation: ΔPmax⁡=ρvω1smax⁡\Delta P_{\max} = \rho v \omega_1 s_{\max}.

  2. Substitute your calculated value ω1=636.8 rad/s\omega_1 = 636.8\text{ rad/s} along with ρ=1.196 kg/m3\rho = 1.196\text{ kg/m}^3, v=344.6 m/sv = 344.6\text{ m/s}, and smax⁡=1.20×10−5 ms_{\max} = 1.20\times 10^{-5}\text{ m}:

  3. ΔPmax⁡=(1.196)(344.6)(636.8)(1.20×10−5)=3.15 Pa\Delta P_{\max} = (1.196)(344.6)(636.8)(1.20\times 10^{-5}) = 3.15\text{ Pa}.

Final answer

(a) f1=101 Hzf_1 = 101\text{ Hz}; (b) ω1=637 rad/s\omega_1 = 637\text{ rad/s}, ΔPmax⁡=3.15 Pa\Delta P_{\max} = 3.15\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check variable symbols against given problem formulas before plugging in numbers.

  • Check units of rate variables: Hertz (s−1)(\text{s}^{-1}) indicates ff, whereas radians per second (rad/s)(\text{rad/s}) indicates ω\omega.

OverviewACEpath Teacher's Diagnosis

03 The student treats the pipe length as equal to one full wavelength (λ₁ = L), leading to a fourfold overestimation of the fundamental frequency and pressure amplitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    λ1=L=0.850 m\lambda_1 = L = 0.850\text{ m}

    Correct

    λ1=4L=4(0.850 m)=3.40 m\lambda_1 = 4L = 4(0.850\text{ m}) = 3.40\text{ m}

    A pipe open at one end and closed at the other must have a displacement node at the closed end and a displacement antinode at the open end. For the fundamental mode, the pipe contains only one quarter of a wavelength (L=14λ1L = \frac{1}{4}\lambda_1), which means λ1=4L\lambda_1 = 4L, not λ1=L\lambda_1 = L.

  2. Step 2

    f1=vλ1=344.60.850=405.4 Hzf_1 = \frac{v}{\lambda_1} = \frac{344.6}{0.850} = 405.4\text{ Hz}

    Correct

    f1=vλ1=344.6 m/s3.40 m≈101 Hzf_1 = \frac{v}{\lambda_1} = \frac{344.6\text{ m/s}}{3.40\text{ m}} \approx 101\text{ Hz}

    You correctly applied the wave relation f=vλf = \frac{v}{\lambda}, but substituting your incorrect wavelength of 0.850 m0.850\text{ m} rather than 3.40 m3.40\text{ m} overestimated the fundamental frequency by a factor of 44.

  3. Step 3

    ω1=2πf1=2π×405.4=2547.2 rad/s\omega_1 = 2\pi f_1 = 2\pi \times 405.4 = 2547.2\text{ rad/s}

    Correct

    ω1=2πf1=2π(101.35 s−1)≈637 rad/s\omega_1 = 2\pi f_1 = 2\pi (101.35\text{ s}^{-1}) \approx 637\text{ rad/s}

    You correctly applied ω=2πf\omega = 2\pi f, but the result was propagated from the incorrect frequency in Step 2.

  4. Step 4

    ΔPmax⁡=ρvω1smax⁡=1.196×344.6×2547.2×1.20×10−5=12.6 Pa\Delta P_{\max} = \rho v \omega_1 s_{\max} = 1.196 \times 344.6 \times 2547.2 \times 1.20\times 10^{-5} = 12.6\text{ Pa}

    Correct

    ΔPmax⁡=ρvω1smax⁡=(1.196)(344.6)(636.8)(1.20×10−5)≈3.15 Pa\Delta P_{\max} = \rho v \omega_1 s_{\max} = (1.196)(344.6)(636.8)(1.20\times 10^{-5}) \approx 3.15\text{ Pa}

    You correctly substituted the values into the pressure amplitude formula, but using the inflated angular frequency ω1\omega_1 scaled your final pressure amplitude up by a factor of 44.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the relationship between wave speed, frequency, and wavelength (v=fλv = f\lambda).

You accurately converted linear frequency to angular frequency using ω=2πf\omega = 2\pi f.

You correctly applied the acoustic pressure amplitude formula ΔPmax⁡=ρvωsmax⁡\Delta P_{\max} = \rho v \omega s_{\max} with consistent physical units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Boundary Condition Misinterpretation

No, this was a conceptual error in identifying the standing wave boundary conditions for a pipe closed at one end and open at the other.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the pipe length fits one complete wave cycle (L=λL = \lambda) instead of matching the physical boundary conditions: a displacement node at the rigid wall and a displacement antinode at the open mouth, which leaves a quarter wavelength (L=14λL = \frac{1}{4}\lambda) in the fundamental mode.

REASONING PATH
Your ACEpath teacher’s suggested approach
Standing Wave Boundary Conditions
  • A closed pipe boundary forces a displacement node (s=0s=0), while an open mouth forms a displacement antinode (s=smax⁡s=s_{\max}).

  • Sketch the displacement envelope inside the tube before writing down λ\lambda. Check the distance from the nearest node to antinode, which is always λ4\frac{\lambda}{4}.

Fundamental Mode Wavelengths in Pipes
  • For a tube with one open end and one closed end, the fundamental mode satisfies L=λ14  ⟹  λ1=4LL = \frac{\lambda_1}{4} \implies \lambda_1 = 4L. For a tube open at both ends, L=λ12  ⟹  λ1=2LL = \frac{\lambda_1}{2} \implies \lambda_1 = 2L.

  • Identify whether the ends are symmetrical or mixed before setting λ1\lambda_1 in terms of LL.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the boundary conditions for a pipe with one open end and one closed end: L=14λ1  ⟹  λ1=4L=4(0.850 m)=3.40 mL = \frac{1}{4}\lambda_1 \implies \lambda_1 = 4L = 4(0.850\text{ m}) = 3.40\text{ m}.

  2. Calculate the fundamental frequency: f1=vλ1=344.6 m/s3.40 m≈101.35 Hz≈101 Hzf_1 = \frac{v}{\lambda_1} = \frac{344.6\text{ m/s}}{3.40\text{ m}} \approx 101.35\text{ Hz} \approx 101\text{ Hz}.

  3. Calculate the angular frequency: ω1=2πf1=2π(101.35 s−1)≈636.8 rad/s≈637 rad/s\omega_1 = 2\pi f_1 = 2\pi (101.35\text{ s}^{-1}) \approx 636.8\text{ rad/s} \approx 637\text{ rad/s}.

  4. Calculate the maximum pressure variation amplitude: ΔPmax⁡=ρvω1smax⁡=(1.196 kg/m3)(344.6 m/s)(636.8 rad/s)(1.20×10−5 m)≈3.15 Pa\Delta P_{\max} = \rho v \omega_1 s_{\max} = (1.196\text{ kg/m}^3)(344.6\text{ m/s})(636.8\text{ rad/s})(1.20\times 10^{-5}\text{ m}) \approx 3.15\text{ Pa}.

Final answer

(a) f1=101 Hzf_1 = 101\text{ Hz}; (b) ω1=637 rad/s\omega_1 = 637\text{ rad/s}, ΔPmax⁡=3.15 Pa\Delta P_{\max} = 3.15\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch the standing wave pattern inside the pipe to visually verify whether each boundary is a node or an antinode.

  • Practice distinguishing the quarter-wavelength relationship of half-open pipes (L=nλ4L = \frac{n\lambda}{4}, n=1,3,5,…n=1,3,5,\dots) from the half-wavelength relationship of open-open pipes (L=nλ2L = \frac{n\lambda}{2}, n=1,2,3,…n=1,2,3,\dots).

  • Recalculate parts (a) and (b) using λ1=3.40 m\lambda_1 = 3.40\text{ m} to solidify how frequency propagates into angular frequency and pressure amplitude.

Lock it in

Similar question

01

A flute can be modeled as an air column of length L=0.600 mL = 0.600\text{ m} open at both ends. Taking the speed of sound to be v=340 m/sv = 340\text{ m/s}, calculate its fundamental frequency f1f_1.

Answer

For a pipe open at both ends, displacement antinodes occur at both ends, so L=λ12  ⟹  λ1=2L=1.20 mL = \frac{\lambda_1}{2} \implies \lambda_1 = 2L = 1.20\text{ m}. Thus, f1=vλ1=340 m/s1.20 m≈283 Hzf_1 = \frac{v}{\lambda_1} = \frac{340\text{ m/s}}{1.20\text{ m}} \approx 283\text{ Hz}.

02

A student blows across the top of an empty glass bottle of depth L=0.200 mL = 0.200\text{ m} (closed at the bottom, open at the top). If sound travels at v=344 m/sv = 344\text{ m/s}, find the frequency of the third harmonic (n=3n = 3).

Answer

An open-closed pipe has resonant frequencies fn=nv4Lf_n = n \frac{v}{4L} for odd integers n=1,3,5,…n = 1, 3, 5, \dots. For n=3n = 3, f3=3(344 m/s4×0.200 m)=3(430 Hz)=1290 Hzf_3 = 3\left(\frac{344\text{ m/s}}{4 \times 0.200\text{ m}}\right) = 3(430\text{ Hz}) = 1290\text{ Hz}.

03

A cylindrical tube of length L=0.800 mL = 0.800\text{ m} is closed at one end. In its fundamental mode, the maximum particle displacement amplitude at the open end is smax⁡=1.50×10−5 ms_{\max} = 1.50 \times 10^{-5}\text{ m}. Given sound speed v=340 m/sv = 340\text{ m/s} and air density ρ=1.20 kg/m3\rho = 1.20\text{ kg/m}^3, determine the maximum acoustic pressure variation ΔPmax⁡\Delta P_{\max} at the closed end.

Answer

For an open-closed pipe, λ1=4L=3.20 m\lambda_1 = 4L = 3.20\text{ m}. The fundamental frequency is f1=vλ1=3403.20=106.25 Hzf_1 = \frac{v}{\lambda_1} = \frac{340}{3.20} = 106.25\text{ Hz}, yielding ω1=2πf1≈667.6 rad/s\omega_1 = 2\pi f_1 \approx 667.6\text{ rad/s}. The acoustic pressure amplitude is ΔPmax⁡=ρvω1smax⁡=(1.20)(340)(667.6)(1.50×10−5)≈4.09 Pa\Delta P_{\max} = \rho v \omega_1 s_{\max} = (1.20)(340)(667.6)(1.50 \times 10^{-5}) \approx 4.09\text{ Pa}.

Loading workspace…