Resources
A high-velocity micro-meteorite of mass travels in deep space at . It impacts and lodges into an unanchored satellite shielding panel of mass initially at rest. Expressing all non-standard quantities in standard SI units: (a) calculate the initial momentum of the micro-meteorite in , and (b) determine the average impulsive force in kilonewtons () experienced by the panel if the embedding process occurs over a stopping depth of with uniform deceleration relative to the panel.
Answer and steps
Final answer
(a) ; (b)
Steps
Part (a): Initial Momentum of the Micro-Meteorite
Step 1: Convert all given values to standard SI units
- Mass of the micro-meteorite:
- Velocity of the micro-meteorite:
- Mass of the panel:
- Stopping distance relative to the panel:
Step 2: Calculate the initial momentum
Momentum is defined as the product of mass and velocity:
Substitute the SI values:
Part (b): Average Impulsive Force on the Panel
Step 1: Determine the relative acceleration
The meteorite penetrates the panel with an initial relative speed and comes to rest relative to the panel () over a displacement .
Under uniform relative deceleration , we apply the kinematic equation:
Step 2: Relate the relative acceleration to the contact force
By Newton's third law, the mutual impulsive force decelerates the meteorite () and accelerates the panel (). Thus, the magnitude of relative acceleration is: where is the reduced mass of the two-body system.
Because :
(Alternatively, via the work-energy theorem in the frame of the panel, the kinetic energy of the meteorite relative to the panel is absorbed entirely by the work done by the average force: .)
Step 3: Compute the average force
Converting to kilonewtons ():
Typical errors
01 The student forgets to convert the velocity from kilometers per hour to meters per second, leading to an incorrect momentum and force.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
,
CorrectYou correctly converted mass from milligrams to kilograms and applied . However, you changed the unit label of velocity from to without dividing by .
- Step 2Correct
Your kinematic formula and substitution of were completely correct, but the numerical acceleration was magnified because it used the uncoverted speed from Step 1.
- Step 3Correct
You correctly related the average force to mass and acceleration and correctly converted newtons to kilonewtons, but the result inherited the error in .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted milligrams to standard kilograms ().
You correctly converted the stopping depth from millimeters to meters ().
You identified and applied the correct kinematic relationship relating stopping distance to uniform deceleration.
You converted your calculated force from newtons to kilonewtons correctly.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou replaced with without dividing by the conversion factor of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking unit conversion on composite rates: when converting speed from to SI units (), kilometers must be multiplied by and hours divided by , giving a net factor of dividing by .
REASONING PATH
Your ACEpath teacher’s suggested approach- Speed Unit Conversion
Whenever speed is given in , divide by before substituting into momentum or energy formulas.
- Checking Physical Magnitude
Hypervelocity space impacts are typically in the range of several (), not for low orbit speeds.
Write out conversion fractions explicitly: .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the initial velocity to standard SI units: .
Calculate the initial momentum: .
Calculate relative deceleration over stopping distance: .
Compute average force: .
(a) ; (b)
02 The student misinterprets the metric prefix milligram as 10⁻³ kg instead of 10⁻⁶ kg, causing the mass to be overestimated by a factor of 1000.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You converted the velocity correctly, but you treated as rather than .
- Step 2Correct
Your formula is completely correct, but using the incorrect mass value made your final momentum 1000 times too large.
- Step 3
- Step 4Correct
You correctly related the impulsive force to mass and acceleration, and you converted newtons to kilonewtons accurately, but your result inherits the 1000-fold mass error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the velocity from to standard SI units of .
You accurately calculated the deceleration using the appropriate kinematic relation for stopping distance.
You properly applied Newton's second law to find the average force and converted newtons into kilonewtons.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated with instead of converting through grams first ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the base metric unit (gram) with the SI base unit (kilogram) when applying prefixes like 'milli-' causes an off-by- conversion error.
REASONING PATH
Your ACEpath teacher’s suggested approach- Two-Step Mass Conversion
The prefix 'milli-' means of the base unit 'gram'. Since , .
Whenever given non-standard mass units like or , convert to grams first, then divide by to reach kilograms.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the mass correctly: .
Recalculate momentum: .
Calculate force using the correct mass: .
(a) ; (b)
03 The student uses the panel mass M instead of the meteorite mass m when calculating the stopping force from deceleration.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
The acceleration belongs to the penetrating micro-meteorite being brought to rest, not the massive satellite panel. By Newton's second and third laws, the contact force decelerates the incoming projectile of mass , so (or ).
- Step 4Correct
Your unit conversion from newtons to kilonewtons was calculated correctly, but it carries forward the incorrect force value from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou converted milligrams to kilograms and kilometers per hour to meters per second accurately.
You computed the initial momentum of the micro-meteorite correctly in Part (a).
You correctly calculated the magnitude of the deceleration over the penetration depth.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou associated the stopping acceleration of the penetrating projectile with the mass of the target panel () instead of the mass being stopped ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify which mass undergoes the computed acceleration
Newton's second law applies to a specific body: .
Check whose velocity changes over the given stopping distance . Here, the meteorite of mass decelerates rapidly from to rest relative to the panel, so .
- Use work-energy to double-check impact force
(for ).
Equate the work done by the retarding force over the penetration depth to the kinetic energy lost by the incoming particle.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply Newton's second law to the decelerating meteorite:
Substitute the meteorite mass :
Convert newtons to kilonewtons:
(a) ; (b) ar{F} = 0.850\text{ kN}
Lock it in
How do you convert a velocity expressed in to standard SI units ()?
Divide by (since ).
Similar question
A paint fleck of mass orbiting in space travels at . Calculate its momentum in standard SI units ().
Answer
First, convert to base SI units: and . Then, .
A test projectile of mass strikes a ballistic gel block at and embeds to a depth of . Assuming uniform deceleration, determine the average retarding force in newtons ().
Answer
Convert units: , , and . Using , . The average force is .
A small space-debris particle of mass moving at impacts an unanchored satellite shielding plate of mass at rest and comes to rest relative to the plate over . Calculate (a) the initial momentum of the particle, and (b) the average force exerted during the impact in .
Answer
(a) , . Initial momentum: . (b) Since , relative deceleration is . The average force is .