Resources

A small delivery cart is pushed up a frictionless ramp inclined at an angle θ=20.0∘\theta = 20.0^\circ above the horizontal. An external force F⃗h\vec{F}_h of magnitude 75.0 N75.0\text{ N} is applied strictly horizontally, pointing into the incline (towards the slope). The mass of the cart is m=15.0 kgm = 15.0\text{ kg}, and g=9.80 m/s2g = 9.80\text{ m/s}^2. Consider a tilted Cartesian coordinate system where the +x+x-axis points up along the surface of the ramp and the +y+y-axis is perpendicular to the ramp directed outward. (a) Decompose both the gravitational force F⃗g\vec{F}_g and the horizontal applied force F⃗h\vec{F}_h into their respective parallel (xx) and perpendicular (yy) components, paying strict attention to signs. (b) Compute the magnitude of the normal force FNF_N. (c) Determine the net acceleration axa_x along the incline, explicitly stating whether it accelerates up or down the ramp.

Answer and steps

Final answer

(a) F⃗g=−(mgsin⁡θ)i^−(mgcos⁡θ)j^=−50.3i^−138j^ N\vec{F}_g = -(mg\sin\theta)\hat{i} - (mg\cos\theta)\hat{j} = -50.3\hat{i} - 138\hat{j}\text{ N}; F⃗h=(Fhcos⁡θ)i^−(Fhsin⁡θ)j^=70.5i^−25.7j^ N\vec{F}_h = (F_h\cos\theta)\hat{i} - (F_h\sin\theta)\hat{j} = 70.5\hat{i} - 25.7\hat{j}\text{ N}; (b) FN=mgcos⁡θ+Fhsin⁡θ=164 NF_N = mg\cos\theta + F_h\sin\theta = 164\text{ N}; (c) ax=Fhcos⁡θ−mgsin⁡θm=+1.35 m/s2a_x = \frac{F_h\cos\theta - mg\sin\theta}{m} = +1.35\text{ m/s}^2 (accelerating up the ramp).

Steps

01

Gravitational Force F⃗g\vec{F}_g

Part (a): Decomposing the Forces into Incline Coordinates

Choose the tilted coordinate system defined in the problem:

  • +x+x-axis points up along the incline.
  • +y+y-axis points perpendicular to the incline, directed outward (away from the surface).

The gravitational force acts vertically downward with magnitude: Fg=mg=(15.0 kg)(9.80 m/s2)=147 NF_g = mg = (15.0\text{ kg})(9.80\text{ m/s}^2) = 147\text{ N}

Because the incline is angled at θ=20.0∘\theta = 20.0^\circ relative to the horizontal, the angle between the vertically downward direction and the negative yy-axis is also θ\theta:

  • Parallel component (xx): acts down the slope (negative xx-direction): Fg,x=−mgsin⁡θ=−(147 N)sin⁡(20.0∘)≈−50.3 NF_{g,x} = -mg\sin\theta = -(147\text{ N})\sin(20.0^\circ) \approx -50.3\text{ N}
  • Perpendicular component (yy): acts directly into the surface (negative yy-direction): Fg,y=−mgcos⁡θ=−(147 N)cos⁡(20.0∘)≈−138 NF_{g,y} = -mg\cos\theta = -(147\text{ N})\cos(20.0^\circ) \approx -138\text{ N}

In unit vector form: F⃗g=−(mgsin⁡θ)i^−(mgcos⁡θ)j^=−50.3i^−138j^ N\vec{F}_g = -(mg\sin\theta)\hat{i} - (mg\cos\theta)\hat{j} = -50.3\hat{i} - 138\hat{j}\text{ N}

02

Horizontal Applied Force F⃗h\vec{F}_h

The force F⃗h\vec{F}_h has magnitude 75.0 N75.0\text{ N} and acts strictly horizontally toward the incline.

  • The angle between the horizontal line and the ramp surface is θ=20.0∘\theta = 20.0^\circ.
  • Projecting onto the tilted axes:
    • Along the incline (+x+x): points up the incline: Fh,x=Fhcos⁡θ=(75.0 N)cos⁡(20.0∘)≈70.5 NF_{h,x} = F_h\cos\theta = (75.0\text{ N})\cos(20.0^\circ) \approx 70.5\text{ N}
    • Perpendicular to the incline (yy): pushes into the ramp surface (negative yy-direction): Fh,y=−Fhsin⁡θ=−(75.0 N)sin⁡(20.0∘)≈−25.7 NF_{h,y} = -F_h\sin\theta = -(75.0\text{ N})\sin(20.0^\circ) \approx -25.7\text{ N}

Common Pitfall: A frequent mistake is assuming the perpendicular component of a horizontal force is zero or points upward. Because the force pushes horizontally into an inclined surface, it presses the object into the ramp, contributing a negative yy-component.

In unit vector form: F⃗h=(Fhcos⁡θ)i^−(Fhsin⁡θ)j^=70.5i^−25.7j^ N\vec{F}_h = (F_h\cos\theta)\hat{i} - (F_h\sin\theta)\hat{j} = 70.5\hat{i} - 25.7\hat{j}\text{ N}


Part (b): Magnitude of the Normal Force FNF_N

Because the cart remains on the surface and does not lift off or break into the ramp, there is no acceleration perpendicular to the ramp (ay=0a_y = 0).

Applying Newton's second law along the yy-axis: ∑Fy=FN+Fg,y+Fh,y=0\sum F_y = F_N + F_{g,y} + F_{h,y} = 0 FN−mgcos⁡θ−Fhsin⁡θ=0F_N - mg\cos\theta - F_h\sin\theta = 0

Solving for FNF_N: FN=mgcos⁡θ+Fhsin⁡θF_N = mg\cos\theta + F_h\sin\theta FN=138.13 N+25.65 N≈164 NF_N = 138.13\text{ N} + 25.65\text{ N} \approx 164\text{ N}


Part (c): Acceleration Along the Incline axa_x

The ramp is frictionless, so the only forces acting along the xx-axis are the parallel components of F⃗h\vec{F}_h and F⃗g\vec{F}_g.

Applying Newton's second law along the xx-axis: ∑Fx=Fh,x+Fg,x=max\sum F_x = F_{h,x} + F_{g,x} = m a_x Fhcos⁡θ−mgsin⁡θ=maxF_h\cos\theta - mg\sin\theta = m a_x

Substitute the known values: 70.48 N−50.28 N=(15.0 kg)ax70.48\text{ N} - 50.28\text{ N} = (15.0\text{ kg})a_x 20.20 N=(15.0 kg)ax20.20\text{ N} = (15.0\text{ kg})a_x ax=20.20 N15.0 kg≈+1.35 m/s2a_x = \frac{20.20\text{ N}}{15.0\text{ kg}} \approx +1.35\text{ m/s}^2

Since ax>0a_x > 0, the cart accelerates up the ramp.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student swaps the trigonometric functions sine and cosine when projecting the horizontal force onto the tilted coordinate axes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fgx=−m⋅g⋅sin⁡(20.0∘)=−50.3 N  ⟹  Fgy=−m⋅g⋅cos⁡(20.0∘)=−138.1 NF_{gx} = -m \cdot g \cdot \sin(20.0^\circ) = -50.3\text{ N} \implies F_{gy} = -m \cdot g \cdot \cos(20.0^\circ) = -138.1\text{ N}

  2. Step 2

    Fhx=Fh⋅sin⁡(20.0∘)=+25.7 N  ⟹  Fhy=−Fh⋅cos⁡(20.0∘)=−70.5 NF_{hx} = F_h \cdot \sin(20.0^\circ) = +25.7\text{ N} \implies F_{hy} = -F_h \cdot \cos(20.0^\circ) = -70.5\text{ N}

    Correct

    Fhx=Fhcos⁡(20.0∘)=+70.5 N  ⟹  Fhy=−Fhsin⁡(20.0∘)=−25.7 NF_{hx} = F_h\cos(20.0^\circ) = +70.5\text{ N} \implies F_{hy} = -F_h\sin(20.0^\circ) = -25.7\text{ N}

    Because the force F⃗h\vec{F}_h is horizontal and the ramp is inclined at θ=20.0∘\theta = 20.0^\circ above the horizontal, the angle between F⃗h\vec{F}_h and the ramp's surface (+x+x-axis) is θ\theta. The adjacent component along the ramp requires cos⁡θ\cos\theta, while the opposite component perpendicular to the ramp requires sin⁡θ\sin\theta.

  3. Step 3

    FN+Fgy+Fhy=0  ⟹  FN=138.1 N+70.5 N=208.6 NF_N + F_{gy} + F_{hy} = 0 \implies F_N = 138.1\text{ N} + 70.5\text{ N} = 208.6\text{ N}

    Correct

    FN=mgcos⁡θ+Fhsin⁡θ=138.1 N+25.7 N=164 NF_N = mg\cos\theta + F_h\sin\theta = 138.1\text{ N} + 25.7\text{ N} = 164\text{ N}

    Your equilibrium equation along the yy-axis is conceptually correct, but substituting the incorrect FhyF_{hy} value led to an incorrect magnitude for the normal force.

  4. Step 4

    ∑Fx=Fhx+Fgx=25.7 N−50.3 N=−24.6 N  ⟹  ax=−24.615.0=−1.64 m/s2  ⟹  Accelerates down the ramp at 1.64 m/s2\sum F_x = F_{hx} + F_{gx} = 25.7\text{ N} - 50.3\text{ N} = -24.6\text{ N} \implies a_x = \frac{-24.6}{15.0} = -1.64\text{ m/s}^2 \implies \text{Accelerates down the ramp at } 1.64\text{ m/s}^2

    Correct

    ∑Fx=Fhcos⁡θ−mgsin⁡θ=70.5 N−50.3 N=+20.2 N  ⟹  ax=+20.2 N15.0 kg=+1.35 m/s2 (accelerating up the ramp)\sum F_x = F_h\cos\theta - mg\sin\theta = 70.5\text{ N} - 50.3\text{ N} = +20.2\text{ N} \implies a_x = \frac{+20.2\text{ N}}{15.0\text{ kg}} = +1.35\text{ m/s}^2\text{ (accelerating up the ramp)}

    Your application of Newton's second law along the xx-axis follows logically from your values, but because FhxF_{hx} was underestimated, the net force came out negative instead of positive.

WHAT YOU DID WELL
Compliments from Your Teacher

You assigned the correct directional signs to all force components in the tilted coordinate system.

You correctly resolved the weight vector into its parallel and perpendicular components.

You applied Newton's second law accurately along both axes based on your calculated components.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Swap

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the parallel component along an incline with sin⁡θ\sin\theta by default rather than identifying which side of the vector triangle is adjacent to the reference angle for a horizontal force.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Angle Identification
  • For a vector inclined at an angle α\alpha relative to an axis, the component along that axis is Fcos⁡αF\cos\alpha, and the perpendicular component is Fsin⁡αF\sin\alpha.

  • Always sketch the right triangle formed by the vector and the coordinate axes before writing trigonometric functions, verifying which leg is adjacent to the angle.

Gravity vs. Horizontal Force on an Incline
  • On a ramp of angle θ\theta with the horizontal: weight F⃗g\vec{F}_g makes angle θ\theta with the perpendicular (yy) axis, whereas a horizontal force F⃗h\vec{F}_h makes angle θ\theta with the parallel (xx) axis.

  • Check that the parallel component of a horizontal force uses cos⁡θ\cos\theta and its perpendicular component uses sin⁡θ\sin\theta.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Resolve F⃗h\vec{F}_h using the incline angle θ=20.0∘\theta = 20.0^\circ: Fhx=Fhcos⁡θ=(75.0 N)cos⁡(20.0∘)≈70.5 NF_{hx} = F_h\cos\theta = (75.0\text{ N})\cos(20.0^\circ) \approx 70.5\text{ N}, pointing up the ramp (+x+x).

  2. Compute the perpendicular component pressing into the surface: Fhy=−Fhsin⁡θ=−(75.0 N)sin⁡(20.0∘)≈−25.7 NF_{hy} = -F_h\sin\theta = -(75.0\text{ N})\sin(20.0^\circ) \approx -25.7\text{ N}.

  3. Recompute the normal force from FN−mgcos⁡θ−Fhsin⁡θ=0F_N - mg\cos\theta - F_h\sin\theta = 0: FN=138.1 N+25.7 N=164 NF_N = 138.1\text{ N} + 25.7\text{ N} = 164\text{ N}.

  4. Calculate net force along the incline: ∑Fx=Fhx+Fgx=70.5 N−50.3 N=+20.2 N\sum F_x = F_{hx} + F_{gx} = 70.5\text{ N} - 50.3\text{ N} = +20.2\text{ N}.

  5. Determine the acceleration: ax=20.2 N15.0 kg≈+1.35 m/s2a_x = \frac{20.2\text{ N}}{15.0\text{ kg}} \approx +1.35\text{ m/s}^2.

Final answer

(a) F⃗g=−50.3i^−138j^ N\vec{F}_g = -50.3\hat{i} - 138\hat{j}\text{ N}, F⃗h=70.5i^−25.7j^ N\vec{F}_h = 70.5\hat{i} - 25.7\hat{j}\text{ N}; (b) FN=164 NF_N = 164\text{ N}; (c) ax=+1.35 m/s2a_x = +1.35\text{ m/s}^2 (accelerating up the ramp)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review vector projection triangles by drawing the angle between the horizontal line and the ramp surface.

  • Practice solving inclined plane problems that involve non-parallel applied forces such as horizontal pushes or pulls at arbitrary angles.

  • Check your intuition with limiting cases: as θ→0∘\theta \to 0^\circ (flat ground), a horizontal force acts purely along xx, meaning its xx-component must be proportional to cos⁡θ\cos\theta, not sin⁡θ\sin\theta.

OverviewACEpath Teacher's Diagnosis

02 The student assumes the normal force balances only the perpendicular component of gravity, omitting the perpendicular component of the applied force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fgx=−m⋅g⋅sin⁡(20.0∘)=−50.3 NF_{gx} = -m \cdot g \cdot \sin(20.0^\circ) = -50.3\text{ N}   ⟹  \implies Fgy=−m⋅g⋅cos⁡(20.0∘)=−138.1 NF_{gy} = -m \cdot g \cdot \cos(20.0^\circ) = -138.1\text{ N}   ⟹  \implies Fhx=Fh⋅cos⁡(20.0∘)=75.0⋅cos⁡(20.0∘)=+70.5 NF_{hx} = F_h \cdot \cos(20.0^\circ) = 75.0 \cdot \cos(20.0^\circ) = +70.5\text{ N}   ⟹  \implies Fhy=−Fh⋅sin⁡(20.0∘)=−75.0⋅sin⁡(20.0∘)=−25.7 NF_{hy} = -F_h \cdot \sin(20.0^\circ) = -75.0 \cdot \sin(20.0^\circ) = -25.7\text{ N}

  2. Step 2

    FN=m⋅g⋅cos⁡(θ)  ⟹  FN=(15.0)(9.80)⋅cos⁡(20.0∘)=138.1 NF_N = m \cdot g \cdot \cos(\theta) \implies F_N = (15.0)(9.80) \cdot \cos(20.0^\circ) = 138.1\text{ N}

    Correct

    ∑Fy=FN+Fgy+Fhy=0  ⟹  FN=mgcos⁡(20.0∘)+Fhsin⁡(20.0∘)≈138.1 N+25.7 N=164 N\sum F_y = F_N + F_{gy} + F_{hy} = 0 \implies F_N = mg\cos(20.0^\circ) + F_h\sin(20.0^\circ) \approx 138.1\text{ N} + 25.7\text{ N} = 164\text{ N}

    Because the horizontal force pushes into the ramp, it has a downward perpendicular component (Fhy=−25.7 NF_{hy} = -25.7\text{ N}). Setting ∑Fy=0\sum F_y = 0 requires the normal force to support both mgcos⁡θmg\cos\theta and Fhsin⁡θF_h\sin\theta, giving FN=164 NF_N = 164\text{ N} rather than just mgcos⁡θmg\cos\theta.

  3. Step 3

    ∑Fx=Fhx+Fgx=70.5 N−50.3 N=+20.2 N  ⟹  ax=20.215.0=+1.35 m/s2  ⟹  Accelerates up the ramp at 1.35 m/s2\sum F_x = F_{hx} + F_{gx} = 70.5\text{ N} - 50.3\text{ N} = +20.2\text{ N} \implies a_x = \frac{20.2}{15.0} = +1.35\text{ m/s}^2 \implies \text{Accelerates up the ramp at } 1.35\text{ m/s}^2

WHAT YOU DID WELL
Compliments from Your Teacher

You decomposed both forces into the ramp coordinate system with accurate trigonometric signs.

You calculated the net force along the incline and found the correct parallel acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula generalization error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated FN=mgcos⁡θF_N = mg\cos\theta as a universal formula for ramps instead of applying Newton's second law perpendicular to the incline (∑Fy=0\sum F_y = 0) to account for the inward component of the horizontal applied force.

REASONING PATH
Your ACEpath teacher’s suggested approach
Always Set Up Newton's Second Law for Perpendicular Forces
  • For an object constrained to a surface with ay=0a_y = 0, the normal force must balance all forces along the yy-axis: ∑Fy=FN−∑Finto surface=0\sum F_y = F_N - \sum F_{\text{into surface}} = 0.

  • Do not default to FN=mgcos⁡θF_N = mg\cos\theta. Write out every force term with a perpendicular component before solving for FNF_N.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the equilibrium condition perpendicular to the incline: ∑Fy=FN+Fgy+Fhy=0\sum F_y = F_N + F_{gy} + F_{hy} = 0.

  2. Substitute the perpendicular components: FN−138.1 N−25.7 N=0F_N - 138.1\text{ N} - 25.7\text{ N} = 0.

  3. Solve for the normal force: FN=138.1 N+25.7 N=163.8 N≈164 NF_N = 138.1\text{ N} + 25.7\text{ N} = 163.8\text{ N} \approx 164\text{ N}.

Final answer

FN=164 NF_N = 164\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing free-body diagrams that explicitly show all perpendicular force components pressing against a surface.

  • Solve problems where applied forces push or pull at arbitrary angles to reinforce writing ∑Fy=0\sum F_y = 0 instead of using memorized shortcuts.

OverviewACEpath Teacher's Diagnosis

03 The student misjudges the direction of the perpendicular component of the applied force, treating it as pushing upward away from the ramp instead of into it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fgx=−m⋅g⋅sin⁡(20.0∘)=−50.3 N  ⟹  Fgy=−m⋅g⋅cos⁡(20.0∘)=−138.1 NF_{gx} = -m \cdot g \cdot \sin(20.0^\circ) = -50.3\text{ N} \implies F_{gy} = -m \cdot g \cdot \cos(20.0^\circ) = -138.1\text{ N}

  2. Step 2

    Fhx=Fh⋅cos⁡(20∘)=+70.5 N  ⟹  Fhy=+Fh⋅sin⁡(20∘)=+25.7 NF_{hx} = F_h \cdot \cos(20^\circ) = +70.5\text{ N} \implies F_{hy} = +F_h \cdot \sin(20^\circ) = +25.7\text{ N}

    Correct

    Fhx=Fhcos⁡θ=+70.5 N,  Fhy=−Fhsin⁡θ=−25.7 NF_{hx} = F_h\cos\theta = +70.5\text{ N},\; F_{hy} = -F_h\sin\theta = -25.7\text{ N}

    The horizontal applied force points into the slope, so its perpendicular component pushes downward into the ramp (in the −y-y direction), giving Fhy=−Fhsin⁡(20.0∘)=−25.7 NF_{hy} = -F_h\sin(20.0^\circ) = -25.7\text{ N}.

  3. Step 3

    FN+Fgy+Fhy=0  ⟹  FN=−Fgy−Fhy=138.1 N−25.7 N=112.4 NF_N + F_{gy} + F_{hy} = 0 \implies F_N = -F_{gy} - F_{hy} = 138.1\text{ N} - 25.7\text{ N} = 112.4\text{ N}

    Correct

    FN=mgcos⁡θ+Fhsin⁡θ=138.1 N+25.7 N=164 NF_N = mg\cos\theta + F_h\sin\theta = 138.1\text{ N} + 25.7\text{ N} = 164\text{ N}

    Your perpendicular equilibrium equation is algebraically sound, but substituting the incorrect positive value of FhyF_{hy} led to an incorrect value for FNF_N.

  4. Step 4

    ∑Fx=Fhx+Fgx=70.5 N−50.3 N=+20.2 N  ⟹  ax=20.215.0=+1.35 m/s2  ⟹  Accelerates up the ramp at 1.35 m/s2\sum F_x = F_{hx} + F_{gx} = 70.5\text{ N} - 50.3\text{ N} = +20.2\text{ N} \implies a_x = \frac{20.2}{15.0} = +1.35\text{ m/s}^2 \implies \text{Accelerates up the ramp at } 1.35\text{ m/s}^2

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved the gravitational force into its parallel and perpendicular components with accurate negative signs.

You correctly applied Newton's second law along the incline to compute the cart's acceleration and motion direction.

You set up the equilibrium equation along the perpendicular yy-axis correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in vector component

You assigned a positive sign to the perpendicular component of the horizontal applied force.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When a force acts horizontally toward an incline, it simultaneously pushes the cart along the incline and presses it down into the surface. Because the +y+y-axis points outward from the surface, pressing into the ramp corresponds to the −y-y direction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Perpendicular Component Sign Check
  • Any force pushing into the inclined surface has a negative yy-component when +y+y points outward normal to the surface.

  • Always sketch the vector decomposition triangle relative to the tilted axes to verify whether the component points outward (+y+y) or inward (−y-y).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Decompose F⃗h\vec{F}_h: along the incline, Fhx=Fhcos⁡(20.0∘)=+70.5 NF_{hx} = F_h\cos(20.0^\circ) = +70.5\text{ N}; perpendicular into the ramp, Fhy=−Fhsin⁡(20.0∘)=−25.7 NF_{hy} = -F_h\sin(20.0^\circ) = -25.7\text{ N}.

  2. Set up perpendicular equilibrium: ∑Fy=FN+Fgy+Fhy=0\sum F_y = F_N + F_{gy} + F_{hy} = 0.

  3. Solve for the normal force: FN=−Fgy−Fhy=−(−138.1 N)−(−25.7 N)=138.1 N+25.7 N=164 NF_N = -F_{gy} - F_{hy} = -(-138.1\text{ N}) - (-25.7\text{ N}) = 138.1\text{ N} + 25.7\text{ N} = 164\text{ N}.

Final answer

(a) F⃗g=−50.3i^−138j^ N\vec{F}_g = -50.3\hat{i} - 138\hat{j}\text{ N}, F⃗h=70.5i^−25.7j^ N\vec{F}_h = 70.5\hat{i} - 25.7\hat{j}\text{ N}; (b) FN=164 NF_N = 164\text{ N}; (c) ax=+1.35 m/s2a_x = +1.35\text{ m/s}^2 (accelerating up the ramp)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing free-body diagrams with vector resolution triangles aligned to tilted axes.

  • Verify physical intuition for normal force: pushing horizontally into a wedge increases surface compression, so FNF_N must exceed mgcos⁡θmg\cos\theta.

Lock it in

Similar question

01

A block of mass m=5.00 kgm = 5.00\text{ kg} rests on a frictionless ramp angled at θ=30.0∘\theta = 30.0^\circ. A horizontal force F⃗h\vec{F}_h of magnitude 40.0 N40.0\text{ N} pushes horizontally against the block toward the ramp. Using a coordinate system with +x+x pointing up the incline and +y+y pointing perpendicular outward, determine the vector components (Fhx,Fhy)(F_{hx}, F_{hy}) of this applied force.

Answer

Fhx=Fhcos⁡(30.0∘)=(40.0)(32)≈+34.6 NF_{hx} = F_h\cos(30.0^\circ) = (40.0)(\frac{\sqrt{3}}{2}) \approx +34.6\text{ N} and Fhy=−Fhsin⁡(30.0∘)=−(40.0)(0.500)=−20.0 NF_{hy} = -F_h\sin(30.0^\circ) = -(40.0)(0.500) = -20.0\text{ N}. Thus, F⃗h=34.6i^−20.0j^ N\vec{F}_h = 34.6\hat{i} - 20.0\hat{j}\text{ N}.

02

A crate of mass 10.0 kg10.0\text{ kg} is on a frictionless 25.0∘25.0^\circ incline. A horizontal force F⃗h\vec{F}_h pushes the crate such that it moves up the incline at a constant velocity. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find the required magnitude of F⃗h\vec{F}_h and the resulting normal force FNF_N.

Answer

At constant velocity, ∑Fx=0  ⟹  Fhcos⁡θ−mgsin⁡θ=0\sum F_x = 0 \implies F_h\cos\theta - mg\sin\theta = 0, so Fh=mgtan⁡θ=(10.0)(9.80)tan⁡(25.0∘)≈45.7 NF_h = mg\tan\theta = (10.0)(9.80)\tan(25.0^\circ) \approx 45.7\text{ N}. Along the perpendicular axis, FN=mgcos⁡θ+Fhsin⁡θ=(98.0)cos⁡(25.0∘)+(45.7)sin⁡(25.0∘)≈88.8 N+19.3 N=108 NF_N = mg\cos\theta + F_h\sin\theta = (98.0)\cos(25.0^\circ) + (45.7)\sin(25.0^\circ) \approx 88.8\text{ N} + 19.3\text{ N} = 108\text{ N}.

03

A 20.0 kg20.0\text{ kg} cart is held on a 35.0∘35.0^\circ incline by an external force F⃗\vec{F} of magnitude 150 N150\text{ N}. Compare two scenarios for the normal force FNF_N: Scenario 1 where F⃗\vec{F} is applied parallel to and directed up the incline, versus Scenario 2 where F⃗\vec{F} is applied horizontally directed into the incline. Take g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

In Scenario 1, F⃗\vec{F} has no perpendicular component, so FN,1=mgcos⁡(35.0∘)=(196)cos⁡(35.0∘)≈161 NF_{N,1} = mg\cos(35.0^\circ) = (196)\cos(35.0^\circ) \approx 161\text{ N}. In Scenario 2, F⃗\vec{F} pushes into the incline with perpendicular component Fsin⁡(35.0∘)F\sin(35.0^\circ), so FN,2=mgcos⁡(35.0∘)+Fsin⁡(35.0∘)=160.6 N+(150)sin⁡(35.0∘)≈161 N+86.0 N=247 NF_{N,2} = mg\cos(35.0^\circ) + F\sin(35.0^\circ) = 160.6\text{ N} + (150)\sin(35.0^\circ) \approx 161\text{ N} + 86.0\text{ N} = 247\text{ N}. The horizontal push increases the normal force by 86.0 N86.0\text{ N}.

Loading workspace…