Resources

In a university physics laboratory, students conduct a dynamic cart experiment using a low-friction air track and an ultrasonic motion sensor connected to a digital data-acquisition interface. A glider of mass m1=0.450 kgm_1 = 0.450\text{ kg} floats on an air cushion where air drag is negligible. The glider is attached to a light, inextensible thread passing over an ideal smart pulley at the end of the track to a hanging weight of mass m2=0.0500 kgm_2 = 0.0500\text{ kg}. Take g=9.80 m/s2g = 9.80\text{ m/s}^2. (a) The system is released from rest. Using Newton's first law, explain why the glider cannot remain at rest once the thread tension is applied. (b) Calculate the theoretical acceleration aa of the system and the tension TT in the thread. (c) At t1=1.20 st_1 = 1.20\text{ s} after release, a sharp blade mounted at the track midpoint cleanly severs the thread between the glider and the pulley. Describe the subsequent motion of the glider along the air track for t>t1t > t_1 in terms of Newton's first law, and calculate the distance Δx\Delta x traversed by the glider between t1=1.20 st_1 = 1.20\text{ s} and t2=2.50 st_2 = 2.50\text{ s}.

Answer and steps

Final answer

(a) By Newton's first law, the glider remains at rest only if the net external force acting on it is zero (ΣF⃗=0\Sigma \vec{F} = 0). Once released, the thread exerts an unbalanced horizontal tension T>0T > 0 along the track, disturbing equilibrium and causing acceleration. (b) a=0.980 m/s2a = 0.980\text{ m/s}^2 and T=0.441 NT = 0.441\text{ N}. (c) Immediately when the thread is severed, the horizontal tension vanishes so ΣFx=0\Sigma F_x = 0; by Newton's first law, the glider ceases accelerating and continues in a straight line at a constant speed of v1=at1=1.18 m/sv_1 = a t_1 = 1.18\text{ m/s}. The distance traveled from t1=1.20 st_1 = 1.20\text{ s} to t2=2.50 st_2 = 2.50\text{ s} (Δt=1.30 s\Delta t = 1.30\text{ s}) is Δx=v1Δt=1.53 m\Delta x = v_1 \Delta t = 1.53\text{ m}.

Steps

Part (a): Newton's First Law and Equilibrium

According to Newton's first law of motion (the law of inertia), an object remains at rest or continues to move at a constant velocity in a straight line if and only if the net external force acting on it is zero: ΣF⃗=0⃗\Sigma \vec{F} = \vec{0}

For the glider on the horizontal air track:

  1. Vertical direction: The downward gravitational force m1g⃗m_1 \vec{g} is balanced by the upward support force (the cushion of air) N⃗\vec{N}, giving ΣFy=N−m1g=0\Sigma F_y = N - m_1 g = 0.
  2. Horizontal direction: Air friction is negligible, so before release, no horizontal forces act. Once released, the taut thread exerts a tension force T⃗\vec{T} directed toward the pulley.

Because there is no opposing horizontal force to counterbalance the tension, the net horizontal force is non-zero: ΣFx=T>0\Sigma F_x = T > 0

Because ΣF⃗≠0⃗\Sigma \vec{F} \neq \vec{0}, the state of rest cannot be maintained, and the glider must accelerate in the direction of the net force.


Part (b): Theoretical Acceleration and Tension

Consider the system of two masses connected by a light, inextensible thread passing over an ideal pulley:

  • Glider of mass m1=0.450 kgm_1 = 0.450\text{ kg} accelerating horizontally: ΣFx=T=m1a\Sigma F_x = T = m_1 a
  • Hanging weight of mass m2=0.0500 kgm_2 = 0.0500\text{ kg} accelerating downward: ΣFy=m2g−T=m2a\Sigma F_y = m_2 g - T = m_2 a

Adding the two equations eliminates the internal tension TT: m2g=(m1+m2)am_2 g = (m_1 + m_2) a

  1. Calculate the acceleration aa: a=m2gm1+m2=0.0500 kg⋅9.80 m/s20.450 kg+0.0500 kg=0.490 N0.500 kg=0.980 m/s2a = \frac{m_2 g}{m_1 + m_2} = \frac{0.0500\text{ kg} \cdot 9.80\text{ m/s}^2}{0.450\text{ kg} + 0.0500\text{ kg}} = \frac{0.490\text{ N}}{0.500\text{ kg}} = 0.980\text{ m/s}^2
  2. Calculate the thread tension TT: T=m1a=0.450 kg⋅0.980 m/s2=0.441 NT = m_1 a = 0.450\text{ kg} \cdot 0.980\text{ m/s}^2 = 0.441\text{ N}

(Verification with mass m2m_2: T=m2(g−a)=0.0500(9.80−0.980)=0.441 NT = m_2(g - a) = 0.0500(9.80 - 0.980) = 0.441\text{ N}.)


Part (c): Motion After the Thread is Severed

  1. Physical explanation using Newton's first law: The moment the thread is cut at t1=1.20 st_1 = 1.20\text{ s}, the horizontal tension immediately drops to zero (T=0T = 0). With no air drag and balanced vertical forces (N=m1gN = m_1 g), the net force acting on the glider becomes zero: ΣF⃗=0⃗\Sigma \vec{F} = \vec{0} According to Newton's first law, an object in motion subject to zero net external force maintains its velocity in both magnitude and direction. Therefore, the glider ceases accelerating and moves in a straight line at a constant speed equal to the speed it attained right before the cut.
  2. Calculate the speed v1v_1 at t1=1.20 st_1 = 1.20\text{ s}: Starting from rest (v0=0v_0 = 0): v1=at1=(0.980 m/s2)(1.20 s)=1.176 m/s≈1.18 m/sv_1 = a t_1 = (0.980\text{ m/s}^2)(1.20\text{ s}) = 1.176\text{ m/s} \approx 1.18\text{ m/s}
  3. Calculate the distance Δx\Delta x traversed between t1=1.20 st_1 = 1.20\text{ s} and t2=2.50 st_2 = 2.50\text{ s}: The time interval of uniform motion is: Δt=t2−t1=2.50 s−1.20 s=1.30 s\Delta t = t_2 - t_1 = 2.50\text{ s} - 1.20\text{ s} = 1.30\text{ s}

    During this interval, the glider covers a distance: Δx=v1Δt=(1.176 m/s)(1.30 s)=1.5288 m≈1.53 m\Delta x = v_1 \Delta t = (1.176\text{ m/s})(1.30\text{ s}) = 1.5288\text{ m} \approx 1.53\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to include the mass of the glider in the denominator of Newton's second law, dividing the accelerating weight by only m2 to find acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Horizontal tension is an unbalanced net force on the glider. By Newton's first law, an object requires zero net force to stay at rest, so the glider must accelerate.

  2. Step 2

    a=m2⋅gm2=g=9.80 m/s2a = \frac{m_2 \cdot g}{m_2} = g = 9.80\text{ m/s}^2

    Correct

    a=m2gm1+m2=0.0500×9.800.450+0.0500=0.980 m/s2a = \frac{m_2 g}{m_1 + m_2} = \frac{0.0500 \times 9.80}{0.450 + 0.0500} = 0.980\text{ m/s}^2

    The gravitational force m2gm_2 g on the hanging mass must accelerate the entire coupled system of mass m1+m2m_1 + m_2, not just m2m_2 alone.

  3. Step 3

    T=m1⋅a=0.450⋅9.80=4.41 NT = m_1 \cdot a = 0.450 \cdot 9.80 = 4.41\text{ N}

    Correct

    T=m1a=0.450 kg×0.980 m/s2=0.441 NT = m_1 a = 0.450\text{ kg} \times 0.980\text{ m/s}^2 = 0.441\text{ N}

    Your formula T=m1aT = m_1 a is correct for the horizontal motion of the glider, but substituting the incorrect acceleration led to T=4.41 NT = 4.41\text{ N} instead of 0.441 N0.441\text{ N}.

  4. Step 4

    After the thread is severed, the horizontal net force is zero, so by Newton's first law the glider moves at constant velocity.

  5. Step 5

    v1=a⋅t1=9.80⋅1.20=11.76 m/s  ⟹  Δt=2.50−1.20=1.30 s  ⟹  Δx=v1⋅Δt=11.76⋅1.30=15.288 m≈15.3 mv_1 = a \cdot t_1 = 9.80 \cdot 1.20 = 11.76\text{ m/s} \implies \Delta t = 2.50 - 1.20 = 1.30\text{ s} \implies \Delta x = v_1 \cdot \Delta t = 11.76 \cdot 1.30 = 15.288\text{ m} \approx 15.3\text{ m}

    Correct

    v1=at1=(0.980)(1.20)=1.176 m/s  ⟹  Δx=v1Δt=(1.176)(1.30)=1.53 mv_1 = a t_1 = (0.980)(1.20) = 1.176\text{ m/s} \implies \Delta x = v_1 \Delta t = (1.176)(1.30) = 1.53\text{ m}

    Your kinematics equations v1=at1v_1 = a t_1 and Δx=v1Δt\Delta x = v_1 \Delta t are completely correct, but the result is ten times too large due to carrying forward a=9.80 m/s2a = 9.80\text{ m/s}^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly and accurately applied Newton's first law to describe both states of motion.

You correctly used T=m1aT = m_1 a to relate the glider's acceleration to the thread tension.

You correctly calculated the cut speed with v1=at1v_1 = a t_1 and the subsequent displacement with Δx=v1Δt\Delta x = v_1 \Delta t.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Inertia of Connected Glider

You divided the net driving force m2gm_2 g by only the hanging mass m2m_2 instead of the combined mass of the connected system.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the driving force with the total mass being accelerated. When two objects are tied together by a taut string, any driving force must accelerate both masses simultaneously, so Fnet, ext=(m1+m2)aF_{\text{net, ext}} = (m_1 + m_2)a.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Whole System Boundary
  • For connected objects moving with the same magnitude of acceleration, a=Fnet, externalmtotala = \frac{F_{\text{net, external}}}{m_{\text{total}}}.

  • Add all moving masses into the denominator before computing the system acceleration.

Reality Check with Free Fall
  • A hanging mass pulling an additional load must accelerate at less than gg.

  • Check if your computed acceleration equals gg; if it does, you have accidentally treated the hanging mass as being in free fall without pulling the glider.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply Newton's second law to the entire system: a=m2gm1+m2=0.0500×9.800.450+0.0500=0.4900.500=0.980 m/s2a = \frac{m_2 g}{m_1 + m_2} = \frac{0.0500 \times 9.80}{0.450 + 0.0500} = \frac{0.490}{0.500} = 0.980\text{ m/s}^2.

  2. Calculate the thread tension: T=m1a=0.450×0.980=0.441 NT = m_1 a = 0.450 \times 0.980 = 0.441\text{ N}.

  3. Find the glider's speed at t1=1.20 st_1 = 1.20\text{ s}: v1=at1=0.980×1.20=1.176 m/sv_1 = a t_1 = 0.980 \times 1.20 = 1.176\text{ m/s}.

  4. Calculate the displacement for Δt=2.50−1.20=1.30 s\Delta t = 2.50 - 1.20 = 1.30\text{ s}: Δx=v1Δt=1.176×1.30=1.5288 m≈1.53 m\Delta x = v_1 \Delta t = 1.176 \times 1.30 = 1.5288\text{ m} \approx 1.53\text{ m}.

Final answer

(b) a=0.980 m/s2a = 0.980\text{ m/s}^2, T=0.441 NT = 0.441\text{ N}; (c) Δx=1.53 m\Delta x = 1.53\text{ m}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing an overall system boundary around both masses to identify internal forces versus the net external driving force.

  • Always verify that the acceleration of a modified Atwood machine satisfies a<ga < g.

OverviewACEpath Teacher's Diagnosis

02 The student assumes the glider continues to accelerate uniformly at a = 0.980 m/s² after the thread is severed instead of moving at constant velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Tension acts as a non-zero net external horizontal force.   ⟹  \implies By Newton's first law, an object cannot stay at rest when the net force is not zero.

  2. Step 2

    a=m2⋅gm1+m2=0.0500⋅9.800.500=0.980 m/s2a = \frac{m_2 \cdot g}{m_1 + m_2} = \frac{0.0500 \cdot 9.80}{0.500} = 0.980\text{ m/s}^2   ⟹  \implies T=m1⋅a=0.450⋅0.980=0.441 NT = m_1 \cdot a = 0.450 \cdot 0.980 = 0.441\text{ N}

  3. Step 3

    The glider maintains its acceleration of 0.980 m/s20.980\text{ m/s}^2 forward along the track.

    Correct

    When the thread is severed, T=0T = 0, so the net force becomes ΣF⃗=0⃗\Sigma \vec{F} = \vec{0}. By Newton's first law, the glider maintains a constant velocity (a=0a = 0), not a constant acceleration.

    Newton's first law states that when the net external force is zero, an object maintains its velocity. Once the thread is cut, the tension drops to zero, meaning the acceleration immediately becomes 0 m/s20\text{ m/s}^2.

  4. Step 4

    v1=a⋅t1=0.980⋅1.20=1.176 m/sv_1 = a \cdot t_1 = 0.980 \cdot 1.20 = 1.176\text{ m/s}   ⟹  \implies Δt=2.50−1.20=1.30 s\Delta t = 2.50 - 1.20 = 1.30\text{ s}

  5. Step 5

    Δx=v1⋅Δt+0.5⋅a⋅(Δt)2=1.176⋅1.30+0.5⋅0.980⋅(1.30)2=1.5288+0.8281=2.3569 m≈2.36 m\Delta x = v_1 \cdot \Delta t + 0.5 \cdot a \cdot (\Delta t)^2 = 1.176 \cdot 1.30 + 0.5 \cdot 0.980 \cdot (1.30)^2 = 1.5288 + 0.8281 = 2.3569\text{ m} \approx 2.36\text{ m}

    Correct

    Δx=v1Δt=(1.176 m/s)(1.30 s)=1.5288 m≈1.53 m\Delta x = v_1 \Delta t = (1.176\text{ m/s})(1.30\text{ s}) = 1.5288\text{ m} \approx 1.53\text{ m}

    Because of the earlier assumption that acceleration continues after the cut, you used the accelerated kinematic formula instead of uniform motion with a=0a = 0.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Newton's first law to explain why an unbalanced horizontal force causes the glider to leave its state of rest.

You accurately solved the coupled two-body system to find the system acceleration and tension.

You correctly computed the glider's instantaneous speed right at the moment the thread was cut.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Constant Acceleration with Inertial Motion

This is a conceptual misconception rather than a minor calculation slip: inertia preserves an object's velocity, not its acceleration, when the net force vanishes.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated acceleration as an inherited state of motion that persists after the driving force disappears. According to Newton's first and second laws, force causes acceleration; when the force ceases, acceleration vanishes immediately (a=0a = 0), leaving the velocity constant.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cause and Effect of Forces
  • Net force causes acceleration (ΣF⃗=ma⃗\Sigma \vec{F} = m\vec{a}). When ΣF⃗=0⃗\Sigma \vec{F} = \vec{0}, acceleration is zero, regardless of what the acceleration was an instant earlier.

  • Whenever a driving force is removed, immediately set the subsequent acceleration to a=0a = 0.

Definition of Inertia
  • Inertia is the tendency of an object to resist changes in its velocity (speed and direction of motion), not changes in its acceleration.

  • Use uniform motion equations (Δx=vΔt\Delta x = v \Delta t) for any interval where the net external force is zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. For t>1.20 st > 1.20\text{ s}, the severed thread exerts no tension (T=0T = 0). With vertical forces balanced and negligible friction, ΣFx=0\Sigma F_x = 0.

  2. By Newton's first law, zero net force implies zero acceleration (a=0a = 0), so the glider continues at a constant velocity of v1=1.176 m/sv_1 = 1.176\text{ m/s}.

  3. Compute the displacement over the interval Δt=2.50 s−1.20 s=1.30 s\Delta t = 2.50\text{ s} - 1.20\text{ s} = 1.30\text{ s}: Δx=v1Δt=(1.176 m/s)(1.30 s)=1.5288 m≈1.53 m\Delta x = v_1 \Delta t = (1.176\text{ m/s})(1.30\text{ s}) = 1.5288\text{ m} \approx 1.53\text{ m}.

Final answer

The glider moves at a constant velocity of 1.18 m/s1.18\text{ m/s} along the track; the distance traveled between t1=1.20 st_1 = 1.20\text{ s} and t2=2.50 st_2 = 2.50\text{ s} is 1.53 m1.53\text{ m}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing free-body diagrams 'before' and 'after' sudden changes in applied forces to visually confirm when ΣF⃗\Sigma \vec{F} becomes zero.

  • Review the distinction between velocity (the state of motion preserved by inertia) and acceleration (the rate of change of velocity, which requires an active net force).

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly equates thread tension to the full static gravitational force of the hanging weight (T = m2 * g), resulting in an incorrect tension and system acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Tension pulls the glider horizontally with no opposing force. ⟹\Longrightarrow Newton's first law states that an object at rest remains at rest only if net force is zero, so it must move.

  2. Step 2

    T=m2⋅g=0.0500⋅9.80=0.490 N⟹a=T/m1=0.490/0.450=1.089 m/s2T = m_2 \cdot g = 0.0500 \cdot 9.80 = 0.490\text{ N} \Longrightarrow a = T / m_1 = 0.490 / 0.450 = 1.089\text{ m/s}^2

    Correct

    a=m2gm1+m2=0.490 N0.500 kg=0.980 m/s2⟹T=m1a=0.441 Na = \frac{m_2 g}{m_1 + m_2} = \frac{0.490\text{ N}}{0.500\text{ kg}} = 0.980\text{ m/s}^2 \Longrightarrow T = m_1 a = 0.441\text{ N}

    You assumed T=m2gT = m_2 g, but the hanging mass accelerates downward with the system. Applying Newton's second law to the hanging mass gives m2g−T=m2am_2 g - T = m_2 a, which means T<m2gT < m_2 g.

  3. Step 3

    With the thread cut, net force is zero so by Newton's first law the glider travels at constant speed. ⟹v1=a⋅t1=1.089⋅1.20=1.3068 m/s⟹Δt=2.50−1.20=1.30 s⟹Δx=v1⋅Δt=1.3068⋅1.30≈1.70 m\Longrightarrow v_1 = a \cdot t_1 = 1.089 \cdot 1.20 = 1.3068\text{ m/s} \Longrightarrow \Delta t = 2.50 - 1.20 = 1.30\text{ s} \Longrightarrow \Delta x = v_1 \cdot \Delta t = 1.3068 \cdot 1.30 \approx 1.70\text{ m}

    Correct

    ΣFx=0  ⟹  v1=at1=(0.980 m/s2)(1.20 s)=1.176 m/s⟹Δx=v1Δt=(1.176 m/s)(1.30 s)≈1.53 m\Sigma F_x = 0 \implies v_1 = a t_1 = (0.980\text{ m/s}^2)(1.20\text{ s}) = 1.176\text{ m/s} \Longrightarrow \Delta x = v_1 \Delta t = (1.176\text{ m/s})(1.30\text{ s}) \approx 1.53\text{ m}

    Your physical reasoning and kinematic formulas are completely sound, but your numerical result is affected by the acceleration calculated in part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that an unbalanced net force disturbs the glider's equilibrium in part (a).

You recognized that after the thread is cut, the net force becomes zero, causing the glider to continue at a constant velocity under Newton's first law.

You set up the kinematic equations for velocity and uniform motion correctly in part (c).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Static Tension Assumption for Accelerating Mass

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the hanging weight as if it were in static equilibrium (T=m2gT = m_2 g), forgetting that the pulling force m2gm_2 g must accelerate the total inertia of the entire system (m1+m2m_1 + m_2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Equation of Motion for Connected Systems
  • For a system of connected masses accelerating together, the net external driving force accelerates the total mass: Fnet, ext=(m1+m2)aF_{\text{net, ext}} = (m_1 + m_2)a.

  • Write Newton's second law for each individual mass or for the combined system before solving for internal forces like tension.

Tension in an Accelerating Hanging Mass
  • When a mass accelerates downward, gravity exceeds tension: m2g−T=m2am_2 g - T = m_2 a, so T=m2(g−a)<m2gT = m_2(g - a) < m_2 g.

  • Check whether the supporting body is accelerating; never set T=mgT = mg unless acceleration is zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the equation of motion for the entire system along the direction of motion: m2g=(m1+m2)am_2 g = (m_1 + m_2) a.

  2. Solve for the system acceleration: a=m2gm1+m2=0.0500⋅9.800.450+0.0500=0.980 m/s2a = \frac{m_2 g}{m_1 + m_2} = \frac{0.0500 \cdot 9.80}{0.450 + 0.0500} = 0.980\text{ m/s}^2.

  3. Substitute aa back to find the tension: T=m1a=0.450⋅0.980=0.441 NT = m_1 a = 0.450 \cdot 0.980 = 0.441\text{ N}.

  4. Calculate the glider's speed at t1=1.20 st_1 = 1.20\text{ s}: v1=at1=0.980⋅1.20=1.176 m/sv_1 = a t_1 = 0.980 \cdot 1.20 = 1.176\text{ m/s}.

  5. Calculate the displacement over Δt=1.30 s\Delta t = 1.30\text{ s}: Δx=v1Δt=1.176⋅1.30≈1.53 m\Delta x = v_1 \Delta t = 1.176 \cdot 1.30 \approx 1.53\text{ m}.

Final answer

(a) Unbalanced tension T>0T > 0 creates a non-zero net force, violating equilibrium; (b) a=0.980 m/s2a = 0.980\text{ m/s}^2 and T=0.441 NT = 0.441\text{ N}; (c) Zero net force implies constant velocity, giving Δx=1.53 m\Delta x = 1.53\text{ m}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw separate free-body diagrams for each mass to avoid assuming static tension in dynamic systems.

  • Check internal consistency: verify that T=m1aT = m_1 a and T=m2(g−a)T = m_2(g - a) yield identical values.

Lock it in

Similar question

01

A 0.300 kg0.300\text{ kg} glider on a frictionless horizontal air track is connected via a light cord over a frictionless pulley to a hanging mass of 0.100 kg0.100\text{ kg}. Take g=9.80 m/s2g = 9.80\text{ m/s}^2. Calculate the system acceleration aa and the tension TT in the cord.

Answer

a=2.45 m/s2a = 2.45\text{ m/s}^2 and T=0.735 NT = 0.735\text{ N}. The net external driving force is Fnet=m2g=0.100×9.80=0.980 NF_{\text{net}} = m_2 g = 0.100 \times 9.80 = 0.980\text{ N}. The total mass is m1+m2=0.300+0.100=0.400 kgm_1 + m_2 = 0.300 + 0.100 = 0.400\text{ kg}. Thus a=0.980 N0.400 kg=2.45 m/s2a = \frac{0.980\text{ N}}{0.400\text{ kg}} = 2.45\text{ m/s}^2. Tension is T=m1a=0.300×2.45=0.735 NT = m_1 a = 0.300 \times 2.45 = 0.735\text{ N}.

02

A 0.600 kg0.600\text{ kg} cart rests on a frictionless horizontal table and is attached to a 0.200 kg0.200\text{ kg} hanging block by a light string over a pulley. Released from rest, the system accelerates for 2.00 s2.00\text{ s}, at which instant the string breaks. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, find: (1) the speed v1v_1 of the cart when the string breaks, and (2) the distance traveled by the cart in the next 1.50 s1.50\text{ s}.

Answer

(1) v1=4.90 m/sv_1 = 4.90\text{ m/s}; (2) Δx=7.35 m\Delta x = 7.35\text{ m}. First, a=m2gm1+m2=0.200×9.800.600+0.200=2.45 m/s2a = \frac{m_2 g}{m_1 + m_2} = \frac{0.200 \times 9.80}{0.600 + 0.200} = 2.45\text{ m/s}^2. At t=2.00 st = 2.00\text{ s}, v1=at=2.45×2.00=4.90 m/sv_1 = a t = 2.45 \times 2.00 = 4.90\text{ m/s}. After the string breaks, net force is zero, so the cart moves at constant speed: Δx=v1Δt=4.90×1.50=7.35 m\Delta x = v_1 \Delta t = 4.90 \times 1.50 = 7.35\text{ m}.

03

A cart of mass MM on a frictionless track is connected to a hanging mass mm. Show that the tension in the connecting thread is given by T=MmM+mgT = \frac{M m}{M + m}g, and explain why T<mgT < mg whenever the system is accelerating downward.

Answer

T=MmM+mgT = \frac{M m}{M + m}g. From Newton's second law on the cart, T=MaT = M a. For the system, a=mgM+ma = \frac{m g}{M + m}. Substituting aa gives T=M(mgM+m)=MmM+mgT = M\left(\frac{m g}{M + m}\right) = \frac{M m}{M + m}g. Because M<M+mM < M + m, the fraction MM+m<1\frac{M}{M + m} < 1, which proves T<mgT < mg. Physically, the hanging mass accelerates downward, requiring a net downward force mg−T=ma>0mg - T = ma > 0, so TT must be strictly less than mgmg.

Loading workspace…