Resources

A light passenger car of mass m=1250 kgm = 1250\text{ kg} traverses the crest of a vertical circular hill of radius R=65.0 mR = 65.0\text{ m} at a constant speed of v=18.0 m/sv = 18.0\text{ m/s}. Common student intuition often erroneously adds an outward 'centrifugal force' pushing upward on the free-body diagram. By drawing the strictly correct inertial free-body diagram containing only real physical forces (gravity and the normal force), formulate Newton's second law along the radial direction toward the center of curvature and compute the actual normal force FNF_N exerted by the road on the vehicle at the exact peak of the hill. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

FN=6.02×103 NF_N = 6.02\times 10^3\text{ N}

Steps

01

Identify Real Forces in an Inertial Reference Frame

At the crest of the hill, the vehicle is in circular motion along a vertical arc. In an inertial (ground) reference frame, only real physical interactions act on the car:

  • Gravitational force (FgF_g): Acts vertically downward toward the center of curvature, with magnitude Fg=mgF_g = mg.
  • Normal force (FNF_N): Exerted by the road surface, pushing perpendicular to the surface vertically upward.

Pitfall to Avoid: Do not include a "centrifugal force" or an extra "centripetal force" as an applied force on the free-body diagram. Centripetal acceleration is the kinematic requirement of moving in a circle, and it is provided by the net vector sum of the real physical forces (FgF_g and FNF_N).


02

Formulate Newton's Second Law along the Radial Direction

Because the center of curvature lies directly below the crest, choose the downward direction toward the center of curvature as positive:

∑Fradial=mac\sum F_{\text{radial}} = m a_c

Substitute the forces acting along this radial axis and the formula for centripetal acceleration, ac=v2Ra_c = \frac{v^2}{R}:

Fg−FN=mv2RF_g - F_N = \frac{m v^2}{R}

mg−FN=mv2Rmg - F_N = \frac{m v^2}{R}


03

Solve for the Normal Force FNF_N

Rearrange the equation to isolate FNF_N:

FN=mg−mv2R=m(g−v2R)F_N = mg - \frac{m v^2}{R} = m\left(g - \frac{v^2}{R}\right)

Notice that FN<mgF_N < mg, which physically explains the "weightless" sensation experienced when driving over the crest of a hill at high speed.


04

Calculate the Numerical Value

Substitute the given quantities (m=1250 kgm = 1250\text{ kg}, g=9.80 m/s2g = 9.80\text{ m/s}^2, v=18.0 m/sv = 18.0\text{ m/s}, and R=65.0 mR = 65.0\text{ m}):

  1. Calculate the centripetal acceleration: ac=(18.0 m/s)265.0 m=324 m2/s265.0 m≈4.985 m/s2a_c = \frac{(18.0\text{ m/s})^2}{65.0\text{ m}} = \frac{324\text{ m}^2/\text{s}^2}{65.0\text{ m}} \approx 4.985\text{ m/s}^2
  2. Compute FNF_N: FN=1250 kg⋅(9.80 m/s2−4.985 m/s2)F_N = 1250\text{ kg} \cdot (9.80\text{ m/s}^2 - 4.985\text{ m/s}^2) FN=1250 kg⋅4.815 m/s2≈6019 NF_N = 1250\text{ kg} \cdot 4.815\text{ m/s}^2 \approx 6019\text{ N}

Expressed to three significant figures:

FN=6.02×103 NF_N = 6.02\times 10^3\text{ N}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student adds the centripetal term rather than subtracting it, effectively treating the normal force as supporting both gravity and centripetal acceleration as if at the bottom of a dip.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    FN−mg=mv2R  ⟹  FN=m(g+v2R)F_N - mg = m\frac{v^2}{R} \implies F_N = m\left(g + \frac{v^2}{R}\right)

    Correct

    mg−FN=mv2R  ⟹  FN=m(g−v2R)mg - F_N = \frac{mv^2}{R} \implies F_N = m\left(g - \frac{v^2}{R}\right)

    At the crest of the hill, the center of curvature lies below the car, so the centripetal acceleration points vertically downward. Taking the downward radial direction as positive gives mg−FN=mv2Rmg - F_N = \frac{mv^2}{R}, meaning gravity must exceed the normal force.

  2. Step 2

    FN=1250(9.80+18.0265.0)  ⟹  FN=1250(9.80+4.98)F_N = 1250\left(9.80 + \frac{18.0^2}{65.0}\right) \implies F_N = 1250(9.80 + 4.98)

    Correct

    FN=1250(9.80−18.0265.0)≈1250(9.80−4.985)F_N = 1250\left(9.80 - \frac{18.0^2}{65.0}\right) \approx 1250(9.80 - 4.985)

    Your numerical substitution and arithmetic for v2R≈4.98 m/s2\frac{v^2}{R} \approx 4.98\text{ m/s}^2 were correct, but they inherited the incorrect plus sign from your radial equation.

  3. Step 3

    FN=1250×14.78=18475 NF_N = 1250 \times 14.78 = 18475\text{ N}

    Correct

    FN=1250×4.815≈6.02×103 NF_N = 1250 \times 4.815 \approx 6.02\times 10^3\text{ N}

    This final value is the arithmetic consequence of adding the centripetal acceleration rather than subtracting it.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the two physical forces acting on the vehicle as gravity and the normal force without introducing fictional forces.

You accurately computed the magnitude of the centripetal acceleration term as v2R≈4.98 m/s2\frac{v^2}{R} \approx 4.98\text{ m/s}^2.

You carried out your algebraic rearrangement and arithmetic consistently from your starting equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Radial Acceleration Direction

You set the centripetal acceleration pointing upward instead of downward toward the center of curvature.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

At the summit of a convex hill, the circular trajectory curves downward, placing the center of curvature directly beneath the car. Because centripetal acceleration always points toward the center of curvature, the net force along the vertical axis must point downward (mg−FN=macmg - F_N = ma_c). Formulating FN−mg=macF_N - mg = ma_c models the opposite scenario: a vehicle at the bottom of a concave valley or dip.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Center of Curvature
  • Centripetal acceleration a⃗c\vec{a}_c always points toward the center of curvature of the circular path.

  • Locate the center of the arc before setting signs. At a crest, the center is below the vehicle, so choose downward as the positive radial direction.

Physical Reality Check
  • At the crest of a hill, high speed produces an apparent weightless feeling (FN<mgF_N < mg), whereas at the bottom of a dip, it produces heavy compression (FN>mgF_N > mg).

  • Verify that your calculated normal force is strictly less than the car's rest weight (mg=12250 Nmg = 12250\text{ N}) when driving over a hill crest.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up Newton's second law along the inward radial axis (downward toward the center): mg−FN=mv2Rmg - F_N = \frac{mv^2}{R}.

  2. Isolate the normal force: FN=m(g−v2R)F_N = m\left(g - \frac{v^2}{R}\right).

  3. Substitute the given values: FN=1250 kg⋅(9.80 m/s2−(18.0 m/s)265.0 m)=1250 kg⋅(9.80 m/s2−4.985 m/s2)F_N = 1250\text{ kg} \cdot \left(9.80\text{ m/s}^2 - \frac{(18.0\text{ m/s})^2}{65.0\text{ m}}\right) = 1250\text{ kg} \cdot (9.80\text{ m/s}^2 - 4.985\text{ m/s}^2).

  4. Multiply to obtain the result: FN=1250 kg⋅4.815 m/s2≈6019 NF_N = 1250\text{ kg} \cdot 4.815\text{ m/s}^2 \approx 6019\text{ N}.

Final answer

FN=6.02×103 NF_N = 6.02\times 10^3\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the trajectory and draw a reference arrow pointing directly toward the center of the arc before writing Newton's second law.

  • Compare your final result against static weight (mgmg) to confirm whether the apparent weight should feel lighter or heavier.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the velocity in the centripetal acceleration formula, using v / R instead of v² / R.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mg−FN=m∗vRmg - F_N = m * \frac{v}{R}

    Correct

    mg−FN=mv2Rmg - F_N = \frac{m v^2}{R}

    You correctly identified the two real forces acting along the vertical radial axis (mgmg downward toward the center of curvature and FNF_N upward). However, centripetal acceleration has the formula ac=v2Ra_c = \frac{v^2}{R}, so the velocity must be squared.

  2. Step 2

    FN=m∗(g−vR)F_N = m * \left(g - \frac{v}{R}\right)

    Correct

    FN=m(g−v2R)F_N = m\left(g - \frac{v^2}{R}\right)

    Your algebraic rearrangement to isolate FNF_N was completely sound, but it carries forward the missing square on velocity.

  3. Step 3

    FN=1250∗(9.80−18.065.0)  ⟹  FN=1250∗(9.80−0.28)  ⟹  FN=1250∗9.52=11900 NF_N = 1250 * \left(9.80 - \frac{18.0}{65.0}\right) \implies F_N = 1250 * (9.80 - 0.28) \implies F_N = 1250 * 9.52 = 11900\text{ N}

    Correct

    FN=1250(9.80−18.0265.0)≈6.02×103 NF_N = 1250\left(9.80 - \frac{18.0^2}{65.0}\right) \approx 6.02\times 10^3\text{ N}

    Your arithmetic and substitution followed your rearranged equation cleanly, but the propagated formula error led to an incorrect numerical result.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly omitted fictitious forces such as centrifugal force from your free-body diagram.

You established the inward radial direction as positive, writing ∑Fradial=mg−FN\sum F_{\text{radial}} = mg - F_N.

You isolated the target variable FNF_N using valid algebraic steps.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Velocity Exponent in Centripetal Acceleration

You wrote the centripetal acceleration as vR\frac{v}{R} rather than v2R\frac{v^2}{R}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the formula for centripetal acceleration, ac=v2Ra_c = \frac{v^2}{R} (or ac=ω2Ra_c = \omega^2 R), with angular velocity or a linear ratio vR=ω\frac{v}{R} = \omega. Always verify the dimensions of acceleration: [m/s]2[m]=m2/s2m=m/s2\frac{[\text{m/s}]^2}{[\text{m}]} = \frac{\text{m}^2/\text{s}^2}{\text{m}} = \text{m/s}^2, whereas vR\frac{v}{R} has units of s−1\text{s}^{-1}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis of $a_c$
  • Acceleration must have units of m/s2\text{m/s}^2.

  • Check your units before calculating: v2R\frac{v^2}{R} yields (m/s)2m=m/s2\frac{(\text{m/s})^2}{\text{m}} = \text{m/s}^2, whereas vR\frac{v}{R} only yields s−1\text{s}^{-1}.

Centripetal Acceleration Expression
  • For an object moving at tangential speed vv along a radius RR, ac=v2Ra_c = \frac{v^2}{R}.

  • Always write ac=v2Ra_c = \frac{v^2}{R} explicitly on your page before substituting numbers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Newton's second law along the inward radial axis: mg−FN=mv2Rmg - F_N = \frac{mv^2}{R}.

  2. Rearrange to solve for the normal force: FN=m(g−v2R)F_N = m\left(g - \frac{v^2}{R}\right).

  3. Calculate the centripetal acceleration: ac=18.0265.0=32465.0≈4.985 m/s2a_c = \frac{18.0^2}{65.0} = \frac{324}{65.0} \approx 4.985\text{ m/s}^2.

  4. Substitute into the force expression: FN=1250(9.80−4.985)=1250(4.815)≈6019 NF_N = 1250(9.80 - 4.985) = 1250(4.815) \approx 6019\text{ N}.

Final answer

FN=6.02×103 NF_N = 6.02\times 10^3\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of uniform circular motion to reinforce why acceleration scales with speed squared.

  • Practice performing a quick dimensional check whenever you write down dynamic or kinematic formulas.

  • Redo this calculation using ac=v2Ra_c = \frac{v^2}{R} to see how significantly the apparent weight drops at the crest.

OverviewACEpath Teacher's Diagnosis

03 The student equates the normal force directly to the weight mg, ignoring the radial acceleration required for circular motion entirely.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    FN=mg  ⟹  FN=1250∗9.80F_N = mg \implies F_N = 1250 * 9.80

    Correct

    mg−FN=mv2R  ⟹  FN=m(g−v2R)mg - F_N = \frac{mv^2}{R} \implies F_N = m\left(g - \frac{v^2}{R}\right)

    You assumed vertical static equilibrium (FN=mgF_N = mg), but traversing a vertical circular path requires a net radial force toward the center of curvature: ∑Fradial=mg−FN=mv2R\sum F_{\text{radial}} = mg - F_N = \frac{mv^2}{R}.

  2. Step 2

    FN=12250 NF_N = 12250\text{ N}

    Correct

    FN≈6.02×103 NF_N \approx 6.02 \times 10^3\text{ N}

    Because the initial force equation omitted the centripetal acceleration term, your final numerical value represents the static weight rather than the reduced contact force at the crest.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the car's mass and gravitational acceleration.

You carried out the arithmetic for your chosen equation accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating Normal Force to Weight in Circular Motion

You treated the car at the peak of a hill as if it were on a flat, horizontal road with zero acceleration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked that motion along a curved trajectory requires a non-zero net force (Fnet=mv2RF_{\text{net}} = m\frac{v^2}{R}) directed toward the center of curvature, meaning the forces along the radial axis cannot balance to zero.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Path Curvature
  • Whenever an object moves along a curved path of radius RR at speed vv, its radial acceleration is ac=v2Ra_c = \frac{v^2}{R} toward the center of curvature.

  • Ask yourself if the object is moving in a circle; if it is, never set ∑Fradial=0\sum F_{\text{radial}} = 0.

Set Up Newton's Second Law Radially
  • Choose the direction toward the center of curvature as positive: ∑Fradial=Finward−Foutward=mv2R\sum F_{\text{radial}} = F_{\text{inward}} - F_{\text{outward}} = \frac{mv^2}{R}.

  • At the crest of a hill, gravity points inward (downward) and the normal force points outward (upward), giving mg−FN=mv2Rmg - F_N = \frac{mv^2}{R}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the radial equation of motion with downward (toward the center) as positive: mg−FN=mv2Rmg - F_N = \frac{mv^2}{R}.

  2. Rearrange to solve for the normal force: FN=m(g−v2R)F_N = m\left(g - \frac{v^2}{R}\right).

  3. Calculate the centripetal acceleration: ac=(18.0 m/s)265.0 m=324 m2/s265.0 m≈4.985 m/s2a_c = \frac{(18.0\text{ m/s})^2}{65.0\text{ m}} = \frac{324\text{ m}^2/\text{s}^2}{65.0\text{ m}} \approx 4.985\text{ m/s}^2.

  4. Compute the normal force: FN=1250 kg⋅(9.80 m/s2−4.985 m/s2)=1250 kg⋅4.815 m/s2≈6019 NF_N = 1250\text{ kg} \cdot (9.80\text{ m/s}^2 - 4.985\text{ m/s}^2) = 1250\text{ kg} \cdot 4.815\text{ m/s}^2 \approx 6019\text{ N}.

Final answer

FN=6.02×103 NF_N = 6.02 \times 10^3\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review free-body diagrams for vertical circular motion to see how inward and outward forces combine to yield centripetal acceleration.

  • Practice finding apparent weight at both the crest of a hill (FN<mgF_N < mg) and the bottom of a dip (FN>mgF_N > mg).

Lock it in

Similar question

01

A 1000 kg1000\text{ kg} roller coaster car passes over the crest of a circular hill of radius R=20.0 mR = 20.0\text{ m} at a constant speed of v=10.0 m/sv = 10.0\text{ m/s}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the normal force exerted by the track on the car.

Answer

FN=4.80×103 NF_N = 4.80\times 10^3\text{ N}. Toward the center (downward): mg−FN=mv2R  ⟹  FN=m(g−v2R)=1000(9.80−10.0220.0)=1000(9.80−5.00)=4800 Nmg - F_N = \frac{mv^2}{R} \implies F_N = m\left(g - \frac{v^2}{R}\right) = 1000\left(9.80 - \frac{10.0^2}{20.0}\right) = 1000(9.80 - 5.00) = 4800\text{ N}.

02

At what critical speed vcritv_{\text{crit}} would a car's tires just lose contact with the pavement (FN=0F_N = 0) when driving over the peak of a circular hill of radius R=40.0 mR = 40.0\text{ m}? Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

vcrit=19.8 m/sv_{\text{crit}} = 19.8\text{ m/s}. When contact is lost, FN=0F_N = 0, so gravity alone provides the centripetal acceleration: mg=mv2R  ⟹  vcrit=gR=9.80 m/s2×40.0 m≈19.8 m/smg = \frac{mv^2}{R} \implies v_{\text{crit}} = \sqrt{gR} = \sqrt{9.80\text{ m/s}^2 \times 40.0\text{ m}} \approx 19.8\text{ m/s}.

03

A 0.500 kg0.500\text{ kg} stone tied to a string of length L=0.800 mL = 0.800\text{ m} whirls in a vertical circle. At the exact top of the path, its speed is 4.00 m/s4.00\text{ m/s}. Find the tension TT in the string. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

T=5.10 NT = 5.10\text{ N}. Both gravity and tension pull downward toward the center: T+mg=mv2L  ⟹  T=m(v2L−g)=0.500(16.00.800−9.80)=0.500(20.0−9.80)=5.10 NT + mg = \frac{mv^2}{L} \implies T = m\left(\frac{v^2}{L} - g\right) = 0.500\left(\frac{16.0}{0.800} - 9.80\right) = 0.500(20.0 - 9.80) = 5.10\text{ N}.

Loading workspace…